[PATCH v3 7/7] ipq806x: Initial TP-Link and ASUS OnHub support
Linus Walleij
linus.walleij at linaro.org
Fri Jan 13 05:40:13 PST 2023
Hi Brian!
I have this device, so as soon as I manage to find time for opening it up
and mounting a UART I will test your patch set!
On Wed, Jan 11, 2023 at 8:13 AM Brian Norris
<computersforpeace at gmail.com> wrote:
> TP-Link and ASUS OnHub devices are very similar, sharing many of the
> same characteristics and much of their Device Tree. They both run a
> version of ChromeOS for their factory firmware, and so installation
> instructions look very similar to Google Wifi [1].
(...)
> create mode 100644 target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8064-asus-onhub.dts
> create mode 100644 target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8064-onhub.dtsi
> create mode 100644 target/linux/ipq806x/files-5.15/arch/arm/boot/dts/qcom-ipq8064-tplink-onhub.dts
Could you please submit these device trees upstream to the
Linux kernel as well?
I don't know your immediate plans, if your idea is to put it into
OpenWrt first, but I'm sure the Qualcomm maintainers
Bjorn and Krzysztof would be delighted to take a look.
A small patch to Documentation/devicetree/bindings/arm/qcom.yaml
adding the new compatibles is needed too.
If you don't have time for this I understand, I can volunteer
to push it upstream and iron out any snags in that case.
Yours,
Linus Walleij
More information about the openwrt-devel
mailing list