[PATCH v2] ramips: add support for Huasifei WS1208V2

[Hauke Mehrtens]

On 1/27/23 14:57, arinc9.unal at gmail.com wrote:
> From: Arınç ÜNAL <arinc.unal at arinc9.com>
> 
> The Huasifei WS1208V2 is an AC1200 router featuring 5 Ethernet ports with a
> Quectel RM520N-GL cellular modem which supports QMI and MBIM modes.
> 
> Specifications:
> - MT7621AT, 256 MiB RAM, 16 MiB SPI Flash
> - MT7603EN 2.4 GHz & MT7612EN 5 GHz WLAN
> - Quectel RM520N-GL Cellular Modem
> - 2 WLAN & 4 Cellular Antennas
> - 5 Gigabit Ethernet Ports
> - 1 USB 2.0 port
> - 1 PCI-E Slot
> - 1 M.2 slot
> - 1 SIM card slot
> - 1 SD card slot
> 
> Installation:
> - Install sysupgrade image via ROOter OS.
> 
> TFTP Recovery:
> - Connect to serial console.
> - Boot initramfs image by choosing option 1 when U-Boot prompts.
> - Install sysupgrade image via OpenWrt.
> 
> Link: https://www.huasifei.com/a/Products/5G%20CPE/240.html
> Signed-off-by: Arınç ÜNAL <arinc.unal at arinc9.com>
> ---
> 
> v2: Add recovery information.
> 
> ---
>   .../ramips/dts/mt7621_huasifei_ws1208v2.dts   | 187 ++++++++++++++++++
>   target/linux/ramips/image/mt7621.mk           |  12 ++
>   .../mt7621/base-files/etc/board.d/01_leds     |   3 +
>   3 files changed, 202 insertions(+)
>   create mode 100644 target/linux/ramips/dts/mt7621_huasifei_ws1208v2.dts
> 
> diff --git a/target/linux/ramips/dts/mt7621_huasifei_ws1208v2.dts b/target/linux/ramips/dts/mt7621_huasifei_ws1208v2.dts
> new file mode 100644
> index 0000000000..c69f05a0f4
> --- /dev/null
> +++ b/target/linux/ramips/dts/mt7621_huasifei_ws1208v2.dts
> @@ -0,0 +1,187 @@
.....
> +&factory {
> +	compatible = "nvmem-cells";
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +
> +	macaddr_factory_e000: macaddr at e000 {
> +		reg = <0xe000 0x6>;
> +	};
> +};

Please move this directly where you defined the factory partition in the 
partitions node.

> diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
> index 2269833e48..bbd25e5be0 100644
> --- a/target/linux/ramips/image/mt7621.mk
> +++ b/target/linux/ramips/image/mt7621.mk
> @@ -996,6 +996,18 @@ define Device/humax_e10
>   endef
>   TARGET_DEVICES += humax_e10
>   
> +define Device/huasifei_ws1208v2
> +  $(Device/dsa-migration)
> +  $(Device/uimage-lzma-loader)
> +  IMAGE_SIZE := 16064k
> +  DEVICE_VENDOR := Huasifei
> +  DEVICE_MODEL := WS1208V2
> +  DEVICE_PACKAGES := kmod-ata-ahci kmod-mt7603 kmod-mt76x2 kmod-sdhci-mt7620 \
> +	kmod-usb3 kmod-usb-net-cdc-mbim kmod-usb-net-qmi-wwan \
> +	kmod-usb-serial-option -wpad-basic-wolfssl

Why do you remove wpad-basic-wolfssl?
What is kmod-usb-net-cdc-mbim needed for?


> +endef
> +TARGET_DEVICES += huasifei_ws1208v2
> +
>   define Device/iodata_wn-ax1167gr
>     $(Device/dsa-migration)
>     $(Device/uimage-lzma-loader)