[PATCH 4/9] kernel/x86: move SCx200 support from generic to geode

[Elliott Mitchell]

The SCx200 is part of the Geode platform.  As such generic x86
doesn't need the driver, but Geode does.

Signed-off-by: Elliott Mitchell <ehem+openwrt at m5p.com>
---
 target/linux/x86/config-5.10       | 5 +----
 target/linux/x86/config-5.15       | 5 +----
 target/linux/x86/geode/config-5.10 | 3 +++
 target/linux/x86/geode/config-5.15 | 3 +++
 4 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/target/linux/x86/config-5.10 b/target/linux/x86/config-5.10
index cfd580b282..f6c5400e73 100644
--- a/target/linux/x86/config-5.10
+++ b/target/linux/x86/config-5.10
@@ -305,10 +305,7 @@ CONFIG_SATA_HOST=y
 # CONFIG_SC1200_WDT is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCx200=y
-CONFIG_SCx200HR_TIMER=y
-# CONFIG_SCx200_GPIO is not set
-# CONFIG_SCx200_WDT is not set
+# CONFIG_SCx200 is not set
 CONFIG_SERIAL_8250_PCI=y
 # CONFIG_SERIAL_LANTIQ is not set
 CONFIG_SERIO=y
diff --git a/target/linux/x86/config-5.15 b/target/linux/x86/config-5.15
index acfaa0e4b7..f572a62e85 100644
--- a/target/linux/x86/config-5.15
+++ b/target/linux/x86/config-5.15
@@ -309,10 +309,7 @@ CONFIG_SATA_HOST=y
 CONFIG_SCSI=y
 CONFIG_SCSI_COMMON=y
 CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCx200=y
-CONFIG_SCx200HR_TIMER=y
-# CONFIG_SCx200_GPIO is not set
-# CONFIG_SCx200_WDT is not set
+# CONFIG_SCx200 is not set
 CONFIG_SERIAL_8250_PCI=y
 # CONFIG_SERIAL_LANTIQ is not set
 CONFIG_SERIO=y
diff --git a/target/linux/x86/geode/config-5.10 b/target/linux/x86/geode/config-5.10
index dc2ac4454b..4c661cdf19 100644
--- a/target/linux/x86/geode/config-5.10
+++ b/target/linux/x86/geode/config-5.10
@@ -112,7 +112,10 @@ CONFIG_RTC_I2C_AND_SPI=y
 # CONFIG_SAMSUNG_Q10 is not set
 CONFIG_SC1200_WDT=y
 # CONFIG_SCSI_FDOMAIN_ISA is not set
+CONFIG_SCx200=y
+CONFIG_SCx200HR_TIMER=y
 CONFIG_SCx200_ACB=y
+# CONFIG_SCx200_GPIO is not set
 CONFIG_SCx200_WDT=y
 # CONFIG_SENSORS_AMD_ENERGY is not set
 CONFIG_SENSORS_LM90=y
diff --git a/target/linux/x86/geode/config-5.15 b/target/linux/x86/geode/config-5.15
index 2a8db278b3..ca4e0abc28 100644
--- a/target/linux/x86/geode/config-5.15
+++ b/target/linux/x86/geode/config-5.15
@@ -122,7 +122,10 @@ CONFIG_RTC_I2C_AND_SPI=y
 # CONFIG_SAMSUNG_Q10 is not set
 CONFIG_SC1200_WDT=y
 # CONFIG_SCSI_FDOMAIN_ISA is not set
+CONFIG_SCx200=y
+CONFIG_SCx200HR_TIMER=y
 CONFIG_SCx200_ACB=y
+# CONFIG_SCx200_GPIO is not set
 CONFIG_SCx200_WDT=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SERIAL_8250_PNP=y
-- 
(\___(\___(\______          --=> 8-) EHM <=--          ______/)___/)___/)
 \BS (    |       ehem+openwrt at m5p.com     PGP 87145445       |    )   /
  \_CS\   |  _____  -O #include <stddisclaimer.h> O-   _____  |   /  _/
8A19\___\_|_/58D2 7E3D DDF4 7BA6 <-PGP-> 41D1 B375 37D0 8714\_|_/___/5445