[PATCH] firewall: config: drop input traffic by default
Baptiste Jonglez
baptiste at bitsofnetworks.org
Wed Oct 19 08:00:03 PDT 2022
From: Baptiste Jonglez <git at bitsofnetworks.org>
This is necessary with firewall4 to avoid a hard-to-diagnose race
condition during boot, causing DNAT rules not to be taken into account
correctly.
The root cause is that, during boot, the ruleset is mostly empty, and
interface-related rules (including DNAT rules) are added incrementally.
If a packet hits the input chain before the DNAT rules are setup, it can
create buggy conntrack entries that will persist indefinitely.
This new default should be safe because firewall4 explicitly accepts
authorized traffic and rejects the rest. Thus, in normal operations, the
default policy is not used.
Fixes: #10749
Ref: https://github.com/openwrt/openwrt/issues/10749
Signed-off-by: Baptiste Jonglez <git at bitsofnetworks.org>
---
package/network/config/firewall/files/firewall.config | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/package/network/config/firewall/files/firewall.config b/package/network/config/firewall/files/firewall.config
index 61cfe665e4..b90ac7af0a 100644
--- a/package/network/config/firewall/files/firewall.config
+++ b/package/network/config/firewall/files/firewall.config
@@ -1,6 +1,6 @@
config defaults
option syn_flood 1
- option input ACCEPT
+ option input REJECT
option output ACCEPT
option forward REJECT
# Uncomment this line to disable ipv6 rules
--
2.30.2
More information about the openwrt-devel
mailing list