[PATCH 8/8] realtek: cleanup rtl83{8x,9x}_enable_learning/flood

Sander Vanheule sander at svanheule.net
Thu Oct 6 13:56:33 PDT 2022


From: INAGAKI Hiroshi <musashino.open at gmail.com>

In *_enable_learning() only address learning should be configured, so
remove enabling forwarding. Forwarding is configured by the respective
*_enable_flood() functions.

Clean up both functions for RTL838x and RTL839x, and fix the comment on
the number of entries.

Signed-off-by: INAGAKI Hiroshi <musashino.open at gmail.com>
[squash RTL838x, RTL839x changes]
Signed-off-by: Sander Vanheule <sander at svanheule.net>
---
 .../drivers/net/dsa/rtl83xx/rtl838x.c         | 32 ++++++-----------
 .../drivers/net/dsa/rtl83xx/rtl839x.c         | 34 ++++++-------------
 2 files changed, 22 insertions(+), 44 deletions(-)

diff --git a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl838x.c b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl838x.c
index 76b6cde7be8c..93fab7e6e30f 100644
--- a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl838x.c
+++ b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl838x.c
@@ -515,32 +515,22 @@ static void rtl838x_l2_learning_setup(void)
 
 static void rtl838x_enable_learning(int port, bool enable)
 {
-	// Limit learning to maximum: 32k entries, after that just flood (bits 0-1)
+	// Limit learning to maximum: 16k entries
 
-	if (enable)  {
-		// flood after 32k entries
-		sw_w32((0x3fff << 2) | 0, RTL838X_L2_PORT_LRN_CONSTRT + (port << 2));
-	} else {
-		// just forward
-		sw_w32(0, RTL838X_L2_PORT_LRN_CONSTRT + (port << 2));
-	}
+	sw_w32_mask(0x3fff << 2, enable ? (0x3fff << 2) : 0,
+		    RTL838X_L2_PORT_LRN_CONSTRT + (port << 2));
 }
 
 static void rtl838x_enable_flood(int port, bool enable)
 {
-	u32 flood_mask = sw_r32(RTL838X_L2_PORT_LRN_CONSTRT + (port << 2));
-
-	if (enable)  {
-		// flood
-		flood_mask &= ~3;
-		flood_mask |= 0;
-		sw_w32(flood_mask, RTL838X_L2_PORT_LRN_CONSTRT + (port << 2));
-	} else {
-		// drop (bit 1)
-		flood_mask &= ~3;
-		flood_mask |= 1;
-		sw_w32(flood_mask, RTL838X_L2_PORT_LRN_CONSTRT + (port << 2));
-	}
+	/*
+	 * 0: Forward
+	 * 1: Disable
+	 * 2: to CPU
+	 * 3: Copy to CPU
+	 */
+	sw_w32_mask(0x3, enable ? 0 : 1,
+		    RTL838X_L2_PORT_LRN_CONSTRT + (port << 2));
 }
 
 static void rtl838x_enable_mcast_flood(int port, bool enable)
diff --git a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl839x.c b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl839x.c
index 7b838cb76b02..199ba347da38 100644
--- a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl839x.c
+++ b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl839x.c
@@ -560,34 +560,22 @@ static void rtl839x_l2_learning_setup(void)
 
 static void rtl839x_enable_learning(int port, bool enable)
 {
-	// Limit learning to maximum: 32k entries, after that just flood (bits 0-1)
-
-	if (enable) {
-		// flood after 32k entries
-		sw_w32((0x7fff << 2) | 0, RTL839X_L2_PORT_LRN_CONSTRT + (port << 2));
-	} else {
-		// just forward
-		sw_w32(0, RTL839X_L2_PORT_LRN_CONSTRT + (port << 2));
-	}
+	// Limit learning to maximum: 32k entries
 
+	sw_w32_mask(0x7fff << 2, enable ? (0x7fff << 2) : 0,
+		    RTL839X_L2_PORT_LRN_CONSTRT + (port << 2));
 }
 
 static void rtl839x_enable_flood(int port, bool enable)
 {
-	u32 flood_mask = sw_r32(RTL839X_L2_PORT_LRN_CONSTRT + (port << 2));
-
-	if (enable)  {
-		// flood
-		flood_mask &= ~3;
-		flood_mask |= 0;
-		sw_w32(flood_mask, RTL839X_L2_PORT_LRN_CONSTRT + (port << 2));
-	} else {
-		// drop (bit 1)
-		flood_mask &= ~3;
-		flood_mask |= 1;
-		sw_w32(flood_mask, RTL839X_L2_PORT_LRN_CONSTRT + (port << 2));
-	}
-
+	/*
+	 * 0: Forward
+	 * 1: Disable
+	 * 2: to CPU
+	 * 3: Copy to CPU
+	 */
+	sw_w32_mask(0x3, enable ? 0 : 1,
+		    RTL839X_L2_PORT_LRN_CONSTRT + (port << 2));
 }
 
 static void rtl839x_enable_mcast_flood(int port, bool enable)
-- 
2.37.3




More information about the openwrt-devel mailing list