[PATCH] ipq40xx: pakedge_wr-1: convert to DSA

Robert Marko robimarko at gmail.com
Wed Oct 5 09:21:53 PDT 2022


On Mon, 3 Oct 2022 at 15:00, Tomasz Maciej Nowak <tmn505 at terefe.re> wrote:
>
> From: Tomasz Maciej Nowak <tmn505 at gmail.com>
>
> And enable the device.
>
> Signed-off-by: Tomasz Maciej Nowak <tmn505 at gmail.com>

LGTM, so:
Reviewed-by: Robert Marko <robimarko at gmail.com>
> ---
>  .../ipq40xx/base-files/etc/board.d/02_network |  1 +
>  .../arch/arm/boot/dts/qcom-ipq4018-wr-1.dts   | 37 +++++++++++++++++++
>  target/linux/ipq40xx/image/generic.mk         |  3 +-
>  3 files changed, 39 insertions(+), 2 deletions(-)
>
> diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network
> index d9a162b10d42..163dcdcbc681 100644
> --- a/target/linux/ipq40xx/base-files/etc/board.d/02_network
> +++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network
> @@ -21,6 +21,7 @@ ipq40xx_setup_interfaces()
>         mikrotik,hap-ac3|\
>         p2w,r619ac-64m|\
>         p2w,r619ac-128m|\
> +       pakedge,wr-1|\
>         zyxel,nbg6617)
>                 ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
>                 ;;
> diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wr-1.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wr-1.dts
> index 317fe26e2e9a..16951da47fc0 100644
> --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wr-1.dts
> +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wr-1.dts
> @@ -11,6 +11,7 @@
>         compatible = "pakedge,wr-1";
>
>         aliases {
> +               label-mac-device = &gmac;
>                 led-boot = &led_power;
>                 led-failsafe = &led_power;
>                 led-running = &led_power;
> @@ -177,6 +178,10 @@
>         status = "okay";
>  };
>
> +&gmac {
> +       status = "okay";
> +};
> +
>  &mdio {
>         status = "okay";
>  };
> @@ -185,6 +190,38 @@
>         status = "okay";
>  };
>
> +&switch {
> +       status = "okay";
> +};
> +
> +&swport1 {
> +       status = "okay";
> +
> +       label = "lan4";
> +};
> +
> +&swport2 {
> +       status = "okay";
> +
> +       label = "lan3";
> +};
> +
> +&swport3 {
> +       status = "okay";
> +
> +       label = "lan2";
> +};
> +
> +&swport4 {
> +       status = "okay";
> +
> +       label = "lan1";
> +};
> +
> +&swport5 {
> +       status = "okay";
> +};
> +
>  &tlmm {
>         key_pins: key_pinmux {
>                 mux {
> diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk
> index 69ec42c26657..3c1cf6744882 100644
> --- a/target/linux/ipq40xx/image/generic.mk
> +++ b/target/linux/ipq40xx/image/generic.mk
> @@ -938,8 +938,7 @@ define Device/pakedge_wr-1
>         IMAGE_SIZE := 31232k
>         IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | append-metadata
>  endef
> -# Missing DSA Setup
> -#TARGET_DEVICES += pakedge_wr-1
> +TARGET_DEVICES += pakedge_wr-1
>
>  define Device/plasmacloud_pa1200
>         $(call Device/FitImageLzma)
> --
> 2.37.3
>
>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list