[PATCH] ipq40xx: luma_wrtq-329acn: convert to DSA

[Robert Marko]

On Mon, 3 Oct 2022 at 15:00, Tomasz Maciej Nowak <tmn505 at terefe.re> wrote:
>
> From: Tomasz Maciej Nowak <tmn505 at gmail.com>
>
> And enable the device.
>
> Signed-off-by: Tomasz Maciej Nowak <tmn505 at gmail.com>

LGTM, so:
Reviewed-by: Robert Marko <robimarko at gmail.com>
> ---
>  .../ipq40xx/base-files/etc/board.d/02_network |  1 +
>  .../arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts | 55 +++++++++++++------
>  target/linux/ipq40xx/image/generic.mk         |  3 +-
>  3 files changed, 41 insertions(+), 18 deletions(-)
>
> diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network
> index 3d05589369b5..d9a162b10d42 100644
> --- a/target/linux/ipq40xx/base-files/etc/board.d/02_network
> +++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network
> @@ -30,6 +30,7 @@ ipq40xx_setup_interfaces()
>         cilab,meshpoint-one|\
>         edgecore,ecw5211|\
>         glinet,gl-b2200|\
> +       luma,wrtq-329acn|\
>         mikrotik,cap-ac|\
>         netgear,wac510)
>                 ucidef_set_interfaces_lan_wan "lan" "wan"
> diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts
> index 2407698fe1c8..4694c5681914 100644
> --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts
> +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts
> @@ -45,10 +45,6 @@
>                         status = "okay";
>                 };
>
> -               mdio at 90000 {
> -                       status = "okay";
> -               };
> -
>                 tcsr at 1949000 {
>                         compatible = "qcom,tcsr";
>                         reg = <0x1949000 0x100>;
> @@ -213,6 +209,45 @@
>         status = "okay";
>  };
>
> +&gmac {
> +       status = "okay";
> +};
> +
> +&ethphy0 {
> +       status = "disabled";
> +};
> +
> +&ethphy1 {
> +       status = "disabled";
> +};
> +
> +&ethphy3 {
> +       status = "disabled";
> +};
> +
> +&mdio {
> +       status = "okay";
> +};
> +
> +&switch {
> +       status = "okay";
> +};
> +
> +&swport3 {
> +       status = "okay";
> +
> +       label = "lan";
> +       nvmem-cell-names = "mac-address";
> +       nvmem-cells = <&macaddr_art_6>;
> +};
> +
> +&swport5 {
> +       status = "okay";
> +
> +       nvmem-cell-names = "mac-address";
> +       nvmem-cells = <&macaddr_art_0>;
> +};
> +
>  &tlmm {
>         serial0_pins: serial0_pinmux {
>                 mux {
> @@ -252,18 +287,6 @@
>         status = "okay";
>  };
>
> -&ethphy0 {
> -       status = "disabled";
> -};
> -
> -&ethphy1 {
> -       status = "disabled";
> -};
> -
> -&ethphy3 {
> -       status = "disabled";
> -};
> -
>  &wifi0 {
>         status = "okay";
>         nvmem-cell-names = "pre-calibration";
> diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk
> index 47e8c129b49c..69ec42c26657 100644
> --- a/target/linux/ipq40xx/image/generic.mk
> +++ b/target/linux/ipq40xx/image/generic.mk
> @@ -727,8 +727,7 @@ define Device/luma_wrtq-329acn
>         BLOCKSIZE := 128k
>         PAGESIZE := 2048
>  endef
> -# Missing DSA Setup
> -#TARGET_DEVICES += luma_wrtq-329acn
> +TARGET_DEVICES += luma_wrtq-329acn
>
>  define Device/meraki_mr33
>         $(call Device/FitImage)
> --
> 2.37.3
>
>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel