[PATCH 1/7] realtek: rtl83xx-phy: fix RTL8214FC media change
Jan Hoffmann
jan at 3e8.eu
Sat Jul 23 13:53:13 PDT 2022
Toggle power on the individual PHY instead of the package. Otherwise
a media change always toggles power on the first port, and not the one
that is being configured.
Signed-off-by: Jan Hoffmann <jan at 3e8.eu>
---
.../files-5.10/drivers/net/phy/rtl83xx-phy.c | 32 +++++++++----------
1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/target/linux/realtek/files-5.10/drivers/net/phy/rtl83xx-phy.c b/target/linux/realtek/files-5.10/drivers/net/phy/rtl83xx-phy.c
index f0c30b36555e..252389489106 100644
--- a/target/linux/realtek/files-5.10/drivers/net/phy/rtl83xx-phy.c
+++ b/target/linux/realtek/files-5.10/drivers/net/phy/rtl83xx-phy.c
@@ -949,19 +949,20 @@ static void rtl8380_rtl8214fc_media_set(struct phy_device *phydev, bool set_fibr
pr_info("Current media %x\n", media);
if (media & 0x2) {
pr_info("Powering off COPPER\n");
- phy_package_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER);
+ phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER);
/* Ensure power is off */
- power = phy_package_read_paged(phydev, RTL821X_PAGE_POWER, 0x10);
+ power = phy_read_paged(phydev, RTL821X_PAGE_POWER, 0x10);
if (!(power & (1 << 11)))
- phy_package_write_paged(phydev, RTL821X_PAGE_POWER, 0x10, power | (1 << 11));
+ phy_write_paged(phydev, RTL821X_PAGE_POWER, 0x10, power | (1 << 11));
} else {
- pr_info("Powering off FIBRE");
- phy_package_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_FIBRE);
+ pr_info("Powering off FIBRE\n");
+ phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_FIBRE);
/* Ensure power is off */
- power = phy_package_read_paged(phydev, RTL821X_PAGE_POWER, 0x10);
+ power = phy_read_paged(phydev, RTL821X_PAGE_POWER, 0x10);
if (!(power & (1 << 11)))
- phy_package_write_paged(phydev, RTL821X_PAGE_POWER, 0x10, power | (1 << 11));
+ phy_write_paged(phydev, RTL821X_PAGE_POWER, 0x10, power | (1 << 11));
}
+ phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO);
if (set_fibre) {
val |= 1 << 10;
@@ -975,22 +976,21 @@ static void rtl8380_rtl8214fc_media_set(struct phy_device *phydev, bool set_fibr
phy_package_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO);
if (set_fibre) {
- pr_info("Powering on FIBRE");
- phy_package_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_FIBRE);
+ pr_info("Powering on FIBRE\n");
+ phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_FIBRE);
/* Ensure power is off */
- power = phy_package_read_paged(phydev, RTL821X_PAGE_POWER, 0x10);
+ power = phy_read_paged(phydev, RTL821X_PAGE_POWER, 0x10);
if (power & (1 << 11))
- phy_package_write_paged(phydev, RTL821X_PAGE_POWER, 0x10, power & ~(1 << 11));
+ phy_write_paged(phydev, RTL821X_PAGE_POWER, 0x10, power & ~(1 << 11));
} else {
pr_info("Powering on COPPER\n");
- phy_package_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER);
+ phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER);
/* Ensure power is off */
- power = phy_package_read_paged(phydev, RTL821X_PAGE_POWER, 0x10);
+ power = phy_read_paged(phydev, RTL821X_PAGE_POWER, 0x10);
if (power & (1 << 11))
- phy_package_write_paged(phydev, RTL821X_PAGE_POWER, 0x10, power & ~(1 << 11));
+ phy_write_paged(phydev, RTL821X_PAGE_POWER, 0x10, power & ~(1 << 11));
}
-
- phy_package_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO);
+ phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO);
}
static bool rtl8380_rtl8214fc_media_is_fibre(struct phy_device *phydev)
--
2.36.1
More information about the openwrt-devel
mailing list