[PATCH v2 1/2] ath79: add support for reset key on MikroTik RB912UAG-2HPnD

[Koen Vandeputte]

On 10.12.21 23:04, Thomas Hühn wrote:
> Hi all,
>
> We have 5 Mikrotik 912UAG in our Freifunk Network and just build and updated them this week from ar71xx 2020 to latest tunk ath79...so far so cool.. all wifi routers mesh .. thx for the upstream work!
>
> The first thing that was (is) not working: we can not get your 2nd wifi card in the mPCIe port up and running.. Denis provided a test patch to enable pcie early in the dts file .. works now… thx a mill!
>
> Second issue:
>
> 5/5 of our productive Freifunk mesh  rb912uag  nodes are able to provide 1G Ethernet with the old ar71xx but not with current ath79 trunk … force a Ethernet speed downgrade to just 100M (ethtool -s eth0 advertise 0x008) works for 4/5 … 1 node does not even work with this… there is a 30m CAT5 ethernet cable between the  rb912uag mesh router and the first openwrt xiaomi 4A AP (Gigabit version) .. working properly under ar71xx with 1G … with ath79 trunk 1G is not working and 100M is not working either… my guess is that the ethernet power for tx or rx or both is in ath79 different compared to ar71xx … so I would expect to find different register settings on ar71xx and ath79 for the ar8003 chip.. what do you think ? .. devmem2 read the register space from ar71xx und ath79 and compare ?
>
> Greetings Thomas
>
Regarding ethernet --> Should be fixed

https://git.openwrt.org/?p=openwrt/staging/xback.git;a=commit;h=f25bbb361f33dc92c70f601eb335d67b64f15f54


Please give my staging tree a try for that.

Thanks,

Koen