[PATCH] ipq40xx: limit available radio channels for GL.iNet GL-B2200

Christian Lamparter chunkeey at gmail.com
Mon Feb 14 12:30:50 PST 2022


Hi,

On Mon, Feb 14, 2022 at 2:29 PM Enrico Mioso <mrkiko.rs at gmail.com> wrote:
> [    0.470732] pci 0000:01:00.0: [168c:0056] type 00 class 0x028000
> [   10.587378] ath10k 5.15 driver, optimized for CT firmware, probing pci device: 0x56.
> [   10.588306] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
> [   10.594929] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
> [   11.631567] ath10k_pci 0000:01:00.0: qca9888 hw2.0 target 0x01000000 chip_id 0x00000000 sub 0000:0000
> [   11.631622] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
> [   11.644152] ath10k_pci 0000:01:00.0: firmware ver 10.4b-ct-9888-fW-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 59e741e7
> [   11.934144] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id N/A crc32 6535d835
> [   13.376455] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
> [   13.376509] ath10k_pci 0000:01:00.0: msdu-desc: 2500  skid: 32
> [   13.430886] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0 ct-sta: 0'
> [   13.431809] ath10k_pci 0000:01:00.0: wmi print 'free: 114572 iram: 12644 sram: 29508'
> [   13.628632] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 32 raw 0 hwcrypto 1

Thank you! This ID matches a 9888 V2. It booted with the "cal file"
with no problem.

Cheers,
Christian



More information about the openwrt-devel mailing list