[PATCH] mvebu: mark all mtd partitions on GL.iNet GL-MV1000 read-only

Enrico Mioso mrkiko.rs at gmail.com
Thu Feb 10 05:35:49 PST 2022


On this device, two of the three defined MTD partitions arre
automatically set to read-only, since they do not end at an erase/write
block boundary.
In particular, the only partition remaining writable is the one holding
the u-boot bootloader.
Mark all of the partitions read-only, at least until a better
understanding of why the layout has been laid out this way is gained.

Signed-off-by: Enrico Mioso <mrkiko.rs at gmail.com>
---
 .../arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts      | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
index cdc91880ee..acf15e8ca9 100644
--- a/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
+++ b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
@@ -91,16 +91,19 @@
 			partition at 0 {
 				label = "u-boot";
 				reg = <0 0xf0000>;
+				read-only;
 			};
 
 			partition at f0000 {
 				label = "u-boot-env";
 				reg = <0Xf0000 0x8000>;
+				read-only;
 			};
 
 			factory: partition at f8000 {
 				label = "factory";
 				reg = <0xf8000 0x8000>;
+				read-only;
 			};
 		};
 	};
-- 
2.35.1




More information about the openwrt-devel mailing list