[PATCH 4/7] lantiq: add DTS for Fritzbox 5490

Torsten Duwe duwe at lst.de
Wed Feb 2 02:33:43 PST 2022


Signed-off-by: Torsten Duwe <duwe at lst.de>
---
 .../boot/dts/lantiq/vr9_avm_fritz5490.dts     | 98 +++++++++++++++++++
 1 file changed, 98 insertions(+)
 create mode 100644 target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz5490.dts

diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz5490.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz5490.dts
new file mode 100644
index 0000000000..67933ff4a1
--- /dev/null
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz5490.dts
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "vr9_avm_fritzx490.dtsi"
+
+/ {
+	compatible = "avm,fritz5490", "lantiq,xway", "lantiq,vr9";
+	model = "AVM FRITZ!Box 5490";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_info_red;
+		led-running = &led_power;
+		led-upgrade = &led_info_red;
+
+		led-dsl = &led_info_green;
+		led-internet = &led_fon;
+		led-wifi = &led_wlan;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		// led 5 "Power"
+		led_power: power {
+			label = "green:power";
+			gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		// led 4 "Fiber"
+		led_fiber: fiber {
+			label = "green:fiber";
+			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+		};
+
+		// led 3 "WLAN"
+		led_wlan: wlan {
+			label = "green:wlan";
+			gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
+		};
+
+		// led 2 "Fon"
+		led_fon: fon {
+			label = "green:fon";
+			gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
+		};
+
+		// led 1 "Info"
+		led_info_green: info_green {
+			label = "green:info";
+			gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
+		};
+		led_info_red: info_red {
+			label = "red:info";
+			gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gswip_mdio {
+	phy0: ethernet-phy at 0 {
+		status = "disabled";
+	};
+
+	phy1: ethernet-phy at 1 {
+		status = "disabled";
+	};
+
+	phy5: ethernet-phy at 5 {
+		reg = <0x05>;
+		// reset-gpios = <&gpio ?? GPIO_ACTIVE_LOW>;
+	};
+
+	// fiber - qca8033 (serdes transceiver) - port0
+	phy6: ethernet-phy at 6 {
+		reg = <0x06>;
+		reset-gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
+	};
+	phy9: ethernet-phy at 9 {
+		reg = <0x09>;
+		// reset-gpios = <&gpio ?? GPIO_ACTIVE_LOW>;
+	};
+
+};
+
+&gswip_ports {
+	// FIXME: this is guesswork!
+	port at 0 {
+		reg = <0>;
+		label = "fiber";
+		phy-mode = "rgmii-rxid";
+		phy-handle = <&phy6>;
+	};
+	port at 1 { // ? label = "lan?";
+		phy-handle = <&phy5>;
+	};
+	// port@? { label = "lan?"; phy-handle = <&phy9>;
+};
-- 
2.34.1




More information about the openwrt-devel mailing list