[PATCH 2/2] bcm53xx: Add D-Link DWL-8610AP board settings

[Linus Walleij]

The D-Link DWL-8610AP does not make use of the B53 switch
like most equipment. It lies dormant and the machine is using
eth0 and eth1 directly.

Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
 target/linux/bcm53xx/base-files/etc/board.d/02_network | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/target/linux/bcm53xx/base-files/etc/board.d/02_network b/target/linux/bcm53xx/base-files/etc/board.d/02_network
index c2e5afc5ed80..6bec600540ea 100644
--- a/target/linux/bcm53xx/base-files/etc/board.d/02_network
+++ b/target/linux/bcm53xx/base-files/etc/board.d/02_network
@@ -16,6 +16,9 @@ bcm53xx_setup_interfaces()
 	asus,rt-ac88u)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 extsw" "wan"
 		;;
+	dlink,dwl-8610ap)
+		ucidef_set_interface_lan "eth0 eth1" "dhcp"
+		;;
 	linksys,panamera)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5 lan6 lan7 lan8 extsw" "wan"
 		;;
-- 
2.34.1