[PATCH v2] ipq40xx: point to externally compiled dtbs in recipes
Robert Marko
robimarko at gmail.com
Thu Aug 25 14:06:45 PDT 2022
On Thu, 25 Aug 2022 at 20:27, Tomasz Maciej Nowak <tmn505 at terefe.re> wrote:
>
> From: Tomasz Maciej Nowak <tmn505 at gmail.com>
>
> Adjusting dts will cause a rebuild of whole kernel as the buildroot
> considers this a part of kernel source. It's a royal PITA when trying to
> prepare support for new device, since this takes a lot of time on slower
> systems. As it stands, buildroot itself, with own rule, also compiles
> dtbs and the results are $(KDIR)/image-$(DEVICE_DTS).dtb. With setting
> DEVICE_DTS_DIR to directory holding the device dts (similarly to some
> other targets), buildroot doesn't consider changed dts as part of kernel
> source and rebuilds only dtb. This really speeds up development. And
> since the kernel built dts are no longer used, drop the paches adding
> dtses to its build.
>
> Signed-off-by: Tomasz Maciej Nowak <tmn505 at gmail.com>
LGTM, so:
Reviewed-by: Robert Marko <robimarko at gmail.com>
Regards,
Robert
> ---
> v1 -> v2
> - drop patches adding dts to kernel build
>
> target/linux/ipq40xx/image/chromium.mk | 2 +-
> target/linux/ipq40xx/image/generic.mk | 20 ++--
> .../901-arm-boot-add-dts-files.patch | 92 -------------------
> .../901-arm-boot-add-dts-files.patch | 91 ------------------
> 4 files changed, 11 insertions(+), 194 deletions(-)
> delete mode 100644 target/linux/ipq40xx/patches-5.10/901-arm-boot-add-dts-files.patch
> delete mode 100644 target/linux/ipq40xx/patches-5.15/901-arm-boot-add-dts-files.patch
>
> diff --git a/target/linux/ipq40xx/image/chromium.mk b/target/linux/ipq40xx/image/chromium.mk
> index 567a5e7ca5c7..2abd2df02ae4 100644
> --- a/target/linux/ipq40xx/image/chromium.mk
> +++ b/target/linux/ipq40xx/image/chromium.mk
> @@ -26,7 +26,7 @@ define Device/google_wifi
> DEVICE_MODEL := WiFi (Gale)
> SOC := qcom-ipq4019
> KERNEL_SUFFIX := -fit-zImage.itb.vboot
> - KERNEL = kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb | cros-vboot
> + KERNEL = kernel-bin | fit none $$(KDIR)/image-$$(DEVICE_DTS).dtb | cros-vboot
> KERNEL_NAME := zImage
> IMAGES += factory.bin
> IMAGE/factory.bin := cros-gpt | append-kernel-part | append-rootfs
> diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk
> index 792122f7a1ae..6daebd5ed0f5 100644
> --- a/target/linux/ipq40xx/image/generic.mk
> +++ b/target/linux/ipq40xx/image/generic.mk
> @@ -5,19 +5,19 @@ DEVICE_VARS += WRGG_DEVNAME WRGG_SIGNATURE
>
> define Device/FitImage
> KERNEL_SUFFIX := -fit-uImage.itb
> - KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
> + KERNEL = kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
> KERNEL_NAME := Image
> endef
>
> define Device/FitImageLzma
> KERNEL_SUFFIX := -fit-uImage.itb
> - KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb
> + KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb
> KERNEL_NAME := Image
> endef
>
> define Device/FitzImage
> KERNEL_SUFFIX := -fit-zImage.itb
> - KERNEL = kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb
> + KERNEL = kernel-bin | fit none $$(KDIR)/image-$$(DEVICE_DTS).dtb
> KERNEL_NAME := zImage
> endef
>
> @@ -308,8 +308,8 @@ TARGET_DEVICES += buffalo_wtr-m2133hp
>
> define Device/cellc_rtl30vw
> KERNEL_SUFFIX := -fit-zImage.itb
> - KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
> - KERNEL = kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb | uImage lzma | pad-to 2048
> + KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
> + KERNEL = kernel-bin | fit none $$(KDIR)/image-$$(DEVICE_DTS).dtb | uImage lzma | pad-to 2048
> KERNEL_NAME := zImage
> KERNEL_IN_UBI :=
> IMAGES := nand-factory.bin nand-sysupgrade.bin
> @@ -376,7 +376,7 @@ define Device/devolo_magic-2-wifi-next
>
> # If the bootloader sees 0xDEADC0DE and this trailer at the 64k boundary of a TFTP image
> # it will bootm it, just like we want for the initramfs.
> - KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to 64k |\
> + KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to 64k |\
> append-string -e '\xDE\xAD\xC0\xDE{"fl_initramfs":""}\x00'
>
> IMAGE_SIZE := 26624k
> @@ -832,7 +832,7 @@ define Device/openmesh_a42
> SOC := qcom-ipq4018
> DEVICE_DTS_CONFIG := config at om.a42
> BLOCKSIZE := 64k
> - KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
> + KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
> IMAGE_SIZE := 15616k
> IMAGES += factory.bin
> IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
> @@ -847,7 +847,7 @@ define Device/openmesh_a62
> SOC := qcom-ipq4019
> DEVICE_DTS_CONFIG := config at om.a62
> BLOCKSIZE := 64k
> - KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
> + KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
> IMAGE_SIZE := 15552k
> IMAGES += factory.bin
> IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
> @@ -889,7 +889,7 @@ define Device/plasmacloud_pa1200
> SOC := qcom-ipq4018
> DEVICE_DTS_CONFIG := config at pc.pa1200
> BLOCKSIZE := 64k
> - KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
> + KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
> IMAGE_SIZE := 15616k
> IMAGES += factory.bin
> IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA1200
> @@ -904,7 +904,7 @@ define Device/plasmacloud_pa2200
> SOC := qcom-ipq4019
> DEVICE_DTS_CONFIG := config at pc.pa2200
> BLOCKSIZE := 64k
> - KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
> + KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
> IMAGE_SIZE := 15552k
> IMAGES += factory.bin
> IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA2200
> diff --git a/target/linux/ipq40xx/patches-5.10/901-arm-boot-add-dts-files.patch b/target/linux/ipq40xx/patches-5.10/901-arm-boot-add-dts-files.patch
> deleted file mode 100644
> index 952092d1f729..000000000000
> --- a/target/linux/ipq40xx/patches-5.10/901-arm-boot-add-dts-files.patch
> +++ /dev/null
> @@ -1,92 +0,0 @@
> -From a10fab12a927e60b7141a602e740d70cb4d09e4a Mon Sep 17 00:00:00 2001
> -From: John Crispin <john at phrozen.org>
> -Date: Thu, 9 Mar 2017 11:03:18 +0100
> -Subject: [PATCH] arm: boot: add dts files
> -
> -Signed-off-by: John Crispin <john at phrozen.org>
> ----
> - arch/arm/boot/dts/Makefile | 23 +++++++++++++++++++++++
> - 1 file changed, 23 insertions(+)
> -
> ---- a/arch/arm/boot/dts/Makefile
> -+++ b/arch/arm/boot/dts/Makefile
> -@@ -904,11 +904,79 @@ dtb-$(CONFIG_ARCH_QCOM) += \
> - qcom-apq8074-dragonboard.dtb \
> - qcom-apq8084-ifc6540.dtb \
> - qcom-apq8084-mtp.dtb \
> -+ qcom-ipq4018-a42.dtb \
> -+ qcom-ipq4018-ap120c-ac.dtb \
> -+ qcom-ipq4018-dap-2610.dtb \
> -+ qcom-ipq4018-cs-w3-wd1200g-eup.dtb \
> -+ qcom-ipq4018-magic-2-wifi-next.dtb \
> -+ qcom-ipq4018-ea6350v3.dtb \
> -+ qcom-ipq4018-eap1300.dtb \
> -+ qcom-ipq4018-ecw5211.dtb \
> -+ qcom-ipq4018-emd1.dtb \
> -+ qcom-ipq4018-emr3500.dtb \
> -+ qcom-ipq4018-ens620ext.dtb \
> -+ qcom-ipq4018-ex6100v2.dtb \
> -+ qcom-ipq4018-ex6150v2.dtb \
> -+ qcom-ipq4018-fritzbox-4040.dtb \
> -+ qcom-ipq4018-gl-ap1300.dtb \
> -+ qcom-ipq4018-jalapeno.dtb \
> -+ qcom-ipq4018-meshpoint-one.dtb \
> -+ qcom-ipq4018-cap-ac.dtb \
> -+ qcom-ipq4018-hap-ac2.dtb \
> -+ qcom-ipq4018-sxtsq-5-ac.dtb \
> -+ qcom-ipq4018-nbg6617.dtb \
> -+ qcom-ipq4019-oap100.dtb \
> -+ qcom-ipq4018-pa1200.dtb \
> -+ qcom-ipq4018-rt-ac58u.dtb \
> -+ qcom-ipq4018-rutx10.dtb \
> -+ qcom-ipq4018-wac510.dtb \
> -+ qcom-ipq4018-wap-ac.dtb \
> -+ qcom-ipq4018-whw01-v1.dtb \
> -+ qcom-ipq4018-wre6606.dtb \
> -+ qcom-ipq4018-wrtq-329acn.dtb \
> - qcom-ipq4019-ap.dk01.1-c1.dtb \
> - qcom-ipq4019-ap.dk04.1-c1.dtb \
> - qcom-ipq4019-ap.dk04.1-c3.dtb \
> - qcom-ipq4019-ap.dk07.1-c1.dtb \
> - qcom-ipq4019-ap.dk07.1-c2.dtb \
> -+ qcom-ipq4019-a62.dtb \
> -+ qcom-ipq4019-cm520-79f.dtb \
> -+ qcom-ipq4019-e2600ac-c1.dtb \
> -+ qcom-ipq4019-e2600ac-c2.dtb \
> -+ qcom-ipq4019-ea8300.dtb \
> -+ qcom-ipq4019-eap2200.dtb \
> -+ qcom-ipq4019-fritzbox-7530.dtb \
> -+ qcom-ipq4019-fritzrepeater-1200.dtb \
> -+ qcom-ipq4019-fritzrepeater-3000.dtb \
> -+ qcom-ipq4019-habanero-dvk.dtb \
> -+ qcom-ipq4019-hap-ac3.dtb \
> -+ qcom-ipq4019-map-ac2200.dtb \
> -+ qcom-ipq4019-lhgg-60ad.dtb \
> -+ qcom-ipq4019-mf286d.dtb \
> -+ qcom-ipq4019-mr8300.dtb \
> -+ qcom-ipq4019-pa2200.dtb \
> -+ qcom-ipq4019-r619ac-64m.dtb \
> -+ qcom-ipq4019-r619ac-128m.dtb \
> -+ qcom-ipq4019-rbr50.dtb \
> -+ qcom-ipq4019-rbs50.dtb \
> -+ qcom-ipq4019-rt-ac42u.dtb \
> -+ qcom-ipq4019-rtl30vw.dtb \
> -+ qcom-ipq4019-srr60.dtb \
> -+ qcom-ipq4019-srs60.dtb \
> -+ qcom-ipq4019-u4019-32m.dtb \
> -+ qcom-ipq4019-wifi.dtb \
> -+ qcom-ipq4019-wpj419.dtb \
> -+ qcom-ipq4019-wtr-m2133hp.dtb \
> -+ qcom-ipq4019-x1pro.dtb \
> -+ qcom-ipq4028-wpj428.dtb \
> -+ qcom-ipq4029-ap-303.dtb \
> -+ qcom-ipq4029-ap-303h.dtb \
> -+ qcom-ipq4029-ap-365.dtb \
> -+ qcom-ipq4029-gl-b1300.dtb \
> -+ qcom-ipq4019-gl-b2200.dtb \
> -+ qcom-ipq4029-gl-s1300.dtb \
> -+ qcom-ipq4029-mr33.dtb \
> -+ qcom-ipq4029-mr74.dtb \
> - qcom-ipq8064-ap148.dtb \
> - qcom-ipq8064-rb3011.dtb \
> - qcom-msm8660-surf.dtb \
> diff --git a/target/linux/ipq40xx/patches-5.15/901-arm-boot-add-dts-files.patch b/target/linux/ipq40xx/patches-5.15/901-arm-boot-add-dts-files.patch
> deleted file mode 100644
> index 78b97393d565..000000000000
> --- a/target/linux/ipq40xx/patches-5.15/901-arm-boot-add-dts-files.patch
> +++ /dev/null
> @@ -1,91 +0,0 @@
> -From a10fab12a927e60b7141a602e740d70cb4d09e4a Mon Sep 17 00:00:00 2001
> -From: John Crispin <john at phrozen.org>
> -Date: Thu, 9 Mar 2017 11:03:18 +0100
> -Subject: [PATCH] arm: boot: add dts files
> -
> -Signed-off-by: John Crispin <john at phrozen.org>
> ----
> - arch/arm/boot/dts/Makefile | 23 +++++++++++++++++++++++
> - 1 file changed, 23 insertions(+)
> -
> ---- a/arch/arm/boot/dts/Makefile
> -+++ b/arch/arm/boot/dts/Makefile
> -@@ -952,11 +952,78 @@ dtb-$(CONFIG_ARCH_QCOM) += \
> - qcom-ipq4018-ap120c-ac.dtb \
> - qcom-ipq4018-ap120c-ac-bit.dtb \
> - qcom-ipq4018-jalapeno.dtb \
> -+ qcom-ipq4018-a42.dtb \
> -+ qcom-ipq4018-ap120c-ac.dtb \
> -+ qcom-ipq4018-dap-2610.dtb \
> -+ qcom-ipq4018-cs-w3-wd1200g-eup.dtb \
> -+ qcom-ipq4018-magic-2-wifi-next.dtb \
> -+ qcom-ipq4018-ea6350v3.dtb \
> -+ qcom-ipq4018-eap1300.dtb \
> -+ qcom-ipq4018-ecw5211.dtb \
> -+ qcom-ipq4018-emd1.dtb \
> -+ qcom-ipq4018-emr3500.dtb \
> -+ qcom-ipq4018-ens620ext.dtb \
> -+ qcom-ipq4018-ex6100v2.dtb \
> -+ qcom-ipq4018-ex6150v2.dtb \
> -+ qcom-ipq4018-fritzbox-4040.dtb \
> -+ qcom-ipq4018-gl-ap1300.dtb \
> -+ qcom-ipq4018-meshpoint-one.dtb \
> -+ qcom-ipq4018-cap-ac.dtb \
> -+ qcom-ipq4018-hap-ac2.dtb \
> -+ qcom-ipq4018-sxtsq-5-ac.dtb \
> -+ qcom-ipq4018-nbg6617.dtb \
> -+ qcom-ipq4019-oap100.dtb \
> -+ qcom-ipq4018-pa1200.dtb \
> -+ qcom-ipq4018-rt-ac58u.dtb \
> -+ qcom-ipq4018-rutx10.dtb \
> -+ qcom-ipq4018-wac510.dtb \
> -+ qcom-ipq4018-wap-ac.dtb \
> -+ qcom-ipq4018-whw01-v1.dtb \
> -+ qcom-ipq4018-wre6606.dtb \
> -+ qcom-ipq4018-wrtq-329acn.dtb \
> - qcom-ipq4019-ap.dk01.1-c1.dtb \
> - qcom-ipq4019-ap.dk04.1-c1.dtb \
> - qcom-ipq4019-ap.dk04.1-c3.dtb \
> - qcom-ipq4019-ap.dk07.1-c1.dtb \
> - qcom-ipq4019-ap.dk07.1-c2.dtb \
> -+ qcom-ipq4019-a62.dtb \
> -+ qcom-ipq4019-cm520-79f.dtb \
> -+ qcom-ipq4019-e2600ac-c1.dtb \
> -+ qcom-ipq4019-e2600ac-c2.dtb \
> -+ qcom-ipq4019-ea8300.dtb \
> -+ qcom-ipq4019-eap2200.dtb \
> -+ qcom-ipq4019-fritzbox-7530.dtb \
> -+ qcom-ipq4019-fritzrepeater-1200.dtb \
> -+ qcom-ipq4019-fritzrepeater-3000.dtb \
> -+ qcom-ipq4019-habanero-dvk.dtb \
> -+ qcom-ipq4019-hap-ac3.dtb \
> -+ qcom-ipq4019-map-ac2200.dtb \
> -+ qcom-ipq4019-lhgg-60ad.dtb \
> -+ qcom-ipq4019-mf286d.dtb \
> -+ qcom-ipq4019-mr8300.dtb \
> -+ qcom-ipq4019-pa2200.dtb \
> -+ qcom-ipq4019-r619ac-64m.dtb \
> -+ qcom-ipq4019-r619ac-128m.dtb \
> -+ qcom-ipq4019-rbr50.dtb \
> -+ qcom-ipq4019-rbs50.dtb \
> -+ qcom-ipq4019-rt-ac42u.dtb \
> -+ qcom-ipq4019-rtl30vw.dtb \
> -+ qcom-ipq4019-srr60.dtb \
> -+ qcom-ipq4019-srs60.dtb \
> -+ qcom-ipq4019-u4019-32m.dtb \
> -+ qcom-ipq4019-wifi.dtb \
> -+ qcom-ipq4019-wpj419.dtb \
> -+ qcom-ipq4019-wtr-m2133hp.dtb \
> -+ qcom-ipq4019-x1pro.dtb \
> -+ qcom-ipq4028-wpj428.dtb \
> -+ qcom-ipq4029-ap-303.dtb \
> -+ qcom-ipq4029-ap-303h.dtb \
> -+ qcom-ipq4029-ap-365.dtb \
> -+ qcom-ipq4029-gl-b1300.dtb \
> -+ qcom-ipq4019-gl-b2200.dtb \
> -+ qcom-ipq4029-gl-s1300.dtb \
> -+ qcom-ipq4029-mr33.dtb \
> -+ qcom-ipq4029-mr74.dtb \
> - qcom-ipq8064-ap148.dtb \
> - qcom-ipq8064-rb3011.dtb \
> - qcom-msm8226-samsung-s3ve3g.dtb \
> --
> 2.37.2
>
>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list