[PATCH] ramips: switch to kernel 5.10
Stijn Segers
foss at volatilesystems.org
Mon Sep 27 10:38:46 PDT 2021
Hi Adrian,
Op zondag 26 september 2021 om 23u45 schreef Adrian Schmutzler
<mail at adrianschmutzler.de>:
> Hi,
>
>> -----Original Message-----
>> From: openwrt-devel [mailto:openwrt-devel-bounces at lists.openwrt.org]
>> On Behalf Of Stijn Segers
>> Sent: Donnerstag, 9. September 2021 14:26
>> To: openwrt-devel at lists.openwrt.org; Paweł Dembicki
>> <paweldembicki at gmail.com>; Rui Salvaterra <rsalvaterra at gmail.com>
>> Cc: OpenWrt Development List <openwrt-devel at lists.openwrt.org>;
>> Adrian
>> Schmutzler <freifunk at adrianschmutzler.de>; David Bauer <mail at david-
>> bauer.net>
>> Subject: Re: [PATCH] ramips: switch to kernel 5.10
>>
>> "Paweł Dembicki" <paweldembicki at gmail.com> schreef op 9 september
>> 2021 13:47:36 CEST:
>> >czw., 9 wrz 2021 o 10:49 Rui Salvaterra <rsalvaterra at gmail.com>
>> napisał(a):
>> >>
>> >> Tested on mt7621 (Redmi AC2100) and running stable for several
>> months.
>> >>
>> >
>> >Hi Rui,
>> >
>> >Please remember, if this patch will be merged before my PR #4255
>> [1],
>> >all mt7620 JBOOT devices will be broken.
>> >
>> >The reason is simple: The 5.10 kernel will be > 2MB. My PR will
>> switch
>> >all mt7620 JBOOT devices to the OKLI loader.
>>
>> Would something similar need to be done for the mt76x8 subtarget?
>>
>> I just have a single one of these but I reckon they are equally
>> flash-starved...
>
> But if KERNEL_SIZE/IMAGE_SIZE is set properly there, those would just
> fail to build, so no harm could be done?
That is a valid point. I checked master:
$ grep "define Device" image/mt7620.mk|wc -l
119
$ grep \ KERNEL_SIZE image/mt7620.mk|wc -l
1
$ grep "define Device" image/mt76x8.mk|wc -l
80
$ grep \ KERNEL_SIZE image/mt76x8.mk|wc -l
0
That's not encouraging I guess :-P. And just having IMAGE_SIZE defined
won't prevent the bootloader from choking on an oversized kernel, or am
I wrong about that?
Cheers
Stijn
>
> Best
>
> Adrian
>
>>
>> Cheers
>>
>> Stijn
>>
>> >
>> >Best Regards,
>> >Pawel
>> >
>> >[1] https://github.com/openwrt/openwrt/pull/4255
>> >
>> >> Signed-off-by: Rui Salvaterra <rsalvaterra at gmail.com>
>> >> ---
>> >> target/linux/ramips/Makefile | 3 +--
>> >> 1 file changed, 1 insertion(+), 2 deletions(-)
>> >>
>> >> diff --git a/target/linux/ramips/Makefile
>> >> b/target/linux/ramips/Makefile index d3f2d4b8fc..c9fc1aa58a
>> 100644
>> >> --- a/target/linux/ramips/Makefile
>> >> +++ b/target/linux/ramips/Makefile
>> >> @@ -10,8 +10,7 @@ BOARDNAME:=MediaTek Ralink MIPS
>> >> SUBTARGETS:=mt7620 mt7621 mt76x8 rt288x rt305x rt3883
>> >> FEATURES:=squashfs gpio
>> >>
>> >> -KERNEL_PATCHVER:=5.4
>> >> -KERNEL_TESTING_PATCHVER:=5.10
>> >> +KERNEL_PATCHVER:=5.10
>> >>
>> >> define Target/Description
>> >> Build firmware images for Ralink RT288x/RT3xxx based
>> boards.
>> >> --
>> >> 2.33.0
>> >>
>> >>
>> >> _______________________________________________
>> >> openwrt-devel mailing list
>> >> openwrt-devel at lists.openwrt.org
>> >> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
>> >
>> >_______________________________________________
>> >openwrt-devel mailing list
>> >openwrt-devel at lists.openwrt.org
>> >https://lists.openwrt.org/mailman/listinfo/openwrt-devel
>>
>> Hi,
>> --
>> Sent from my smartphone with K-9 Mail. Please excuse my brevity.
>>
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel at lists.openwrt.org
>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list