[PATCH v3] arm-trusted-firmware-mvebu: CZ.NIC's Secure Firmware bump to v2021.09.07

Andre Heider a.heider at gmail.com
Wed Sep 15 06:21:27 PDT 2021


On 14/09/2021 20:42, Josef Schlehofer wrote:
> 
> On 14. 09. 21 20:21, Andre Heider wrote:
>> On 14/09/2021 19:59, Hauke Mehrtens wrote:
>>> On 9/14/21 10:50 AM, sean lee wrote:
>>>> bump version and remove patches that have been applied
>>>>
>>>> 176d701 wtmi: Wait 1s after putting PHYs INTn pin low
>>>> 2eeccfe wtmi: Change comment describing reset workaround
>>>> e8c94a5 wtmi: Count RAM size from both CS0 and CS1
>>>> 995979e wtmi: Rename macro
>>>> e29eb29 wtmi: soc: Fix start_ap_workaround() for TF-A with debug
>>>> 81245ed wtmi: Use constant name PLAT_MARVELL_MAILBOX_BASE
>>>> 18ccb83 wtmi: Do a proper UART reset with clock change as described
>>>> in spec
>>>> 15ff106 avs: Validate VDD value from OTP
>>>> 3f33626 fix: clock: a3700: change pwm clock for 600/600 and 1200/750
>>>> preset
>>>> fb5e436 wtmi: uart: fix UART baudrate divisor calculation
>>>>
>>>> Signed-off-by: sean lee <ilf at live.com>
>>>> ---
>>>>    .../boot/arm-trusted-firmware-mvebu/Makefile  |  4 +-
>>>>    ...ix-UART-baudrate-divisor-calculation.patch | 66
>>>> -------------------
>>>>    ...change-pwm-clock-for-600-600-and-120.patch | 48 --------------
>>>>    .../102-avs-Validate-VDD-value-from-OTP.patch | 52 ---------------
>>>>    4 files changed, 2 insertions(+), 168 deletions(-)
>>>>    delete mode 100644
>>>> package/boot/arm-trusted-firmware-mvebu/patches-mox-boot-builder/100-wtmi-uart-fix-UART-baudrate-divisor-calculation.patch
>>>>
>>>>    delete mode 100644
>>>> package/boot/arm-trusted-firmware-mvebu/patches-mox-boot-builder/101-fix-clock-a3700-change-pwm-clock-for-600-600-and-120.patch
>>>>
>>>>    delete mode 100644
>>>> package/boot/arm-trusted-firmware-mvebu/patches-mox-boot-builder/102-avs-Validate-VDD-value-from-OTP.patch
>>>>
>>>>
>>>
>>> Hi,
>>>
>>> This is a little bit unrelated.
>>>
>>> Is the source code of image/a3700-utils/wtptp/linux/tbb_linux
>>> available   somewhere? I wanted to build mvebu/cortex53 on an aarch64
>>> host system and this file is only available for x86_64 and the
>>> compilation fails.
>>
>> Yeah, its source is bundled, and actually atf upstream recently
>> switched to building it instead of using the checked in binary.
> TBH, it was outdated, buggy and recent changes were not included in the
> bundled library as said here
> https://github.com/MarvellEmbeddedProcessors/A3700-utils-marvell/commit/f014428f4bf7feafec1dcc4c37506d847718649a
>>
>> Building it requires cryptocpp though, which doesn't yet exists as
>> package. We don't really care about crypto since we're building just
>> an untrusted firmware, so I opted to revert to using the binary
>> instead. This is on top of the x86_64 binary toolchain too anyway.
> 
> This one:
> https://github.com/BKPepe/openwrt/commit/42322bebc5804a99b60a5bb54200eeba0587076d
> worked for me. But I didn't send it yet as I didn't do run-time testing
> yet. I will do it soon.

Maybe use a cryptocpp release tarball instead of a git clone? That'll be 
faster and a smaller download.

And I think you also need to bump the a3700-utils version to include the 
build fixes?

>>
>> See package/boot/arm-trusted-firmware-mvebu/patches/001-imagetool.patch.
>>
>> If you get rid of that patch and add cryptocpp/host it should build it
>> automatically and use that instead. But that still leaves the issue
>> with the binary toolchain, no?
>>
>>>
>>> Building flash image
>>> /bin/sh: 1:
>>> /home/ubuntu/openwrt/openwrt/staging_dir/target-aarch64_cortex-a53_musl/image/a3700-utils/wtptp/linux/tbb_linux:
>>> Exec format error
>>> make[4]: *** [plat/marvell/armada/a3k/common/a3700_common.mk:186:
>>> /home/ubuntu/openwrt/openwrt/build_dir/target-aarch64_cortex-a53_musl/trusted-firmware-a-espressobin-512mb/trusted-firmware-a-2.5/build/a3700/release/flash-image.bin]
>>> Error 2
>>>
>>>
>>> ubuntu at instance-20210910-2105:~/openwrt/openwrt$ file
>>> /home/ubuntu/openwrt/openwrt/staging_dir/target-aarch64_cortex-a53_musl/image/a3700-utils/wtptp/linux/tbb_linux
>>>
>>> /home/ubuntu/openwrt/openwrt/staging_dir/target-aarch64_cortex-a53_musl/image/a3700-utils/wtptp/linux/tbb_linux:
>>> ELF 64-bit LSB executable, x86-64, version 1 (GNU/Linux), dynamically
>>> linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux
>>> 2.6.24, BuildID[sha1]=8169eedf6eef4b1993a65a180baee3d31660c000, with
>>> debug_info, not stripped
>>> ubuntu at instance-20210910-2105:~/openwrt/openwrt$ uname -a
>>> Linux instance-20210910-2105 5.11.0-1017-oracle #18~20.04.1-Ubuntu
>>> SMP Fri Aug 27 11:09:43 UTC 2021 aarch64 aarch64 aarch64 GNU/Linux
>>> ubuntu at instance-20210910-2105:~/openwrt/openwrt$
>>>
>>> Hauke
> 
> 
> 
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
> 




More information about the openwrt-devel mailing list