[PATCH v2 2/2] firmware-utils: tplink-safeloader: set EAP235-Wall v1 soft-version

[Sander Vanheule]

Starting with v3 of the vendor firmware for the TP-Link EAP235-Wall v1,
downgrades to firmware versions below v3 as not allowed.  Since OpenWrt
uses version 0.0.0 as a default, this causes the factory install to fail
on devices with a recent firmware. This failure is associated by the
following message on the device's serial console:

    EAP235/230-Wall forbid fw reverted from 3.x.x to lower version!

Vendor firmware (v3) also uses build and release numbers to compare
images, so identical version numbers are very unlikely to cause issues.
Bump the firmware version to 3.0.0 to ensure users can install OpenWrt
on their devices.

Reported-by: Colton Conor <colton.conor at gmail.com>
Tested-by: Colton Conor <colton.conor at gmail.com>
Signed-off-by: Sander Vanheule <sander at svanheule.net>
---
v2: Add Colton Conor's tags

 tools/firmware-utils/src/tplink-safeloader.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c
index 923cd865f64c..04a77fa079c9 100644
--- a/tools/firmware-utils/src/tplink-safeloader.c
+++ b/tools/firmware-utils/src/tplink-safeloader.c
@@ -1560,7 +1560,7 @@ static struct device_info boards[] = {
 			"SupportList:\r\n"
 			"EAP235-Wall(TP-Link|UN|AC1200-D):1.0\r\n",
 		.part_trail = PART_TRAIL_NONE,
-		.soft_ver = SOFT_VER_DEFAULT,
+		.soft_ver = SOFT_VER_NUMERIC(3, 0, 0),
 		.soft_ver_compat_level = 1,
 
 		.partitions = {
-- 
2.31.1