[PATCH] ramips: switch to kernel 5.10

[Stijn Segers]

"Paweł Dembicki" <paweldembicki at gmail.com> schreef op 9 september 2021 13:47:36 CEST:
>czw., 9 wrz 2021 o 10:49 Rui Salvaterra <rsalvaterra at gmail.com> napisał(a):
>>
>> Tested on mt7621 (Redmi AC2100) and running stable for several months.
>>
>
>Hi Rui,
>
>Please remember, if this patch will be merged before my PR #4255 [1],
>all mt7620 JBOOT devices will be broken.
>
>The reason is simple: The 5.10 kernel will be > 2MB. My PR will switch
>all mt7620 JBOOT devices to the OKLI loader.

Would something similar need to be done for the mt76x8 subtarget?

I just have a single one of these but I reckon they are equally flash-starved...

Cheers

Stijn

>
>Best Regards,
>Pawel
>
>[1] https://github.com/openwrt/openwrt/pull/4255
>
>> Signed-off-by: Rui Salvaterra <rsalvaterra at gmail.com>
>> ---
>>  target/linux/ramips/Makefile | 3 +--
>>  1 file changed, 1 insertion(+), 2 deletions(-)
>>
>> diff --git a/target/linux/ramips/Makefile b/target/linux/ramips/Makefile
>> index d3f2d4b8fc..c9fc1aa58a 100644
>> --- a/target/linux/ramips/Makefile
>> +++ b/target/linux/ramips/Makefile
>> @@ -10,8 +10,7 @@ BOARDNAME:=MediaTek Ralink MIPS
>>  SUBTARGETS:=mt7620 mt7621 mt76x8 rt288x rt305x rt3883
>>  FEATURES:=squashfs gpio
>>
>> -KERNEL_PATCHVER:=5.4
>> -KERNEL_TESTING_PATCHVER:=5.10
>> +KERNEL_PATCHVER:=5.10
>>
>>  define Target/Description
>>         Build firmware images for Ralink RT288x/RT3xxx based boards.
>> --
>> 2.33.0
>>
>>
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel at lists.openwrt.org
>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
>
>_______________________________________________
>openwrt-devel mailing list
>openwrt-devel at lists.openwrt.org
>https://lists.openwrt.org/mailman/listinfo/openwrt-devel

Hi,
-- 
Sent from my smartphone with K-9 Mail. Please excuse my brevity.