[PATCH v8 2/2] mvebu: add support for iEi Puzzle-M901/Puzzle-M902
eveans2002 at gmail.com
eveans2002 at gmail.com
Thu Sep 2 02:47:20 PDT 2021
From: Ian Chang <ianchang at ieiworld.com>
Hardware specification
----------------------
* CN9130 SoC, Quad-core ARMv8 Cortex-72 @ 2200 MHz
* 4 GB DDR
* 4 GB eMMC
* mmcblk0
- mmcblk0p1 64M kernel_1
- mmcblk0p2 64M kernel_2
- mmcblk0p3 512M rootfs_1
- mmcblk0p4 512M rootfs_2
- mmcblk0p5 512M Reserved
- mmcblk0p6 64M Reserved
- mmcblk0p7 1.8G rootfs_data
* 4 MB (SPI Flash)
* 6 x 2.5 Gigabit ports (Puzzle-M901)
- External PHY with 6 ports (AQR112R)
* 6 x 2.5 Gigabit ports (Puzzle-M902)
- External PHY with 6 ports (AQR112R)
3 x 10 Gigabit ports (Puzzle-M902)
- External PHY with 3 ports (AQR113R)
* 4 x Front panel LED
* 1 x USB 3.0
* Reset button on Rear panel
* UART (115200 8N1,header on PCB)
Flash instructions:
The original firmware is based on OpenWrt.
Flash firmware using LuCI and CLI
Signed-off-by: Ian Chang <ianchang at ieiworld.com>
---
.../base-files/etc/board.d/02_network | 6 +
.../base-files/lib/upgrade/emmc-puzzle.sh | 36 ++
.../base-files/lib/upgrade/platform.sh | 8 +
.../boot/dts/marvell/cn9131-puzzle-m901.dts | 319 ++++++++++++
.../boot/dts/marvell/cn9132-puzzle-m902.dts | 481 ++++++++++++++++++
target/linux/mvebu/image/cortexa72.mk | 18 +
6 files changed, 868 insertions(+)
mode change 100644 => 100755 target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network
create mode 100755 target/linux/mvebu/cortexa72/base-files/lib/upgrade/emmc-puzzle.sh
create mode 100644 target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9131-puzzle-m901.dts
create mode 100644 target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts
diff --git a/target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network b/target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network
old mode 100644
new mode 100755
index dbffd00223..f185a88347
--- a/target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network
+++ b/target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network
@@ -10,6 +10,12 @@ board_config_update
board=$(board_name)
case "$board" in
+iei,puzzle-m901)
+ ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4 eth5" "eth0"
+ ;;
+iei,puzzle-m902)
+ ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4 eth5 eth10 eth11 eth12" "eth0"
+ ;;
marvell,armada8040-mcbin-doubleshot|\
marvell,armada8040-mcbin-singleshot)
ucidef_set_interfaces_lan_wan "eth0 eth1 eth3" "eth2"
diff --git a/target/linux/mvebu/cortexa72/base-files/lib/upgrade/emmc-puzzle.sh b/target/linux/mvebu/cortexa72/base-files/lib/upgrade/emmc-puzzle.sh
new file mode 100755
index 0000000000..5e5c356ed6
--- /dev/null
+++ b/target/linux/mvebu/cortexa72/base-files/lib/upgrade/emmc-puzzle.sh
@@ -0,0 +1,36 @@
+platform_do_upgrade_emmc() {
+ local board=$(board_name)
+ local diskdev partdev
+
+ export_bootdevice && export_partdevice diskdev 0 || {
+ v "Unable to determine upgrade device"
+ return 1
+ }
+ sync
+ if [ "$UPGRADE_OPT_SAVE_PARTITIONS" = "1" ]; then
+ get_partitions "/dev/$diskdev" bootdisk
+ v "Extract boot sector from the image"
+ get_image_dd "$1" of=/tmp/image.bs count=1 bs=512b
+ get_partitions /tmp/image.bs image
+ fi
+
+ #iterate over each partition from the image and write it to the boot disk
+ while read part start size; do
+ if export_partdevice partdev $part; then
+ if [ "$partdev" = "mmcblk0p2" ]; then
+ v "Writing image mmcblk0p3 for /dev/$partdev $start $size"
+ get_image_dd "$1" of="/dev/mmcblk0p3" ibs="512" obs=1M skip="$start" count="$size" conv=fsync
+ elif [ "$partdev" = "mmcblk0p1" ]; then
+ v "Writing image mmcblk0p1 for /dev/$partdev $start $size"
+ get_image_dd "$1" of="/dev/$partdev" ibs="512" obs=1M skip="$start" count="$size" conv=fsync
+ fi
+ else
+ v "Unable to find partition $part device, skipped."
+ fi
+ done < /tmp/partmap.image
+
+ v "Writing new UUID to /dev/$diskdev..."
+ get_image_dd "$1" of="/dev/$diskdev" bs=1 skip=440 count=4 seek=440 conv=fsync
+
+ sleep 1
+}
diff --git a/target/linux/mvebu/cortexa72/base-files/lib/upgrade/platform.sh b/target/linux/mvebu/cortexa72/base-files/lib/upgrade/platform.sh
index 74aad434ea..ef09a502cc 100755
--- a/target/linux/mvebu/cortexa72/base-files/lib/upgrade/platform.sh
+++ b/target/linux/mvebu/cortexa72/base-files/lib/upgrade/platform.sh
@@ -9,6 +9,8 @@ REQUIRE_IMAGE_METADATA=1
platform_check_image() {
case "$(board_name)" in
+ iei,puzzle-m901|\
+ iei,puzzle-m902|\
marvell,armada8040-mcbin-doubleshot|\
marvell,armada8040-mcbin-singleshot)
legacy_sdcard_check_image "$1"
@@ -21,6 +23,10 @@ platform_check_image() {
platform_do_upgrade() {
case "$(board_name)" in
+ iei,puzzle-m901|\
+ iei,puzzle-m902)
+ platform_do_upgrade_emmc "$1"
+ ;;
marvell,armada8040-mcbin-doubleshot|\
marvell,armada8040-mcbin-singleshot)
legacy_sdcard_do_upgrade "$1"
@@ -32,6 +38,8 @@ platform_do_upgrade() {
}
platform_copy_config() {
case "$(board_name)" in
+ iei,puzzle-m901|\
+ iei,puzzle-m902|\
marvell,armada8040-mcbin-doubleshot|\
marvell,armada8040-mcbin-singleshot)
legacy_sdcard_copy_config
diff --git a/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9131-puzzle-m901.dts b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9131-puzzle-m901.dts
new file mode 100644
index 0000000000..58e749490a
--- /dev/null
+++ b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9131-puzzle-m901.dts
@@ -0,0 +1,319 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * Device tree for the CN9131-DB board.
+ */
+
+#include "cn9130.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "iEi Puzzle-M901";
+ compatible = "iei,puzzle-m901",
+ "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ i2c0 = &cp1_i2c0;
+ i2c1 = &cp0_i2c0;
+ ethernet0 = &cp0_eth0;
+ ethernet1 = &cp0_eth1;
+ ethernet2 = &cp0_eth2;
+ ethernet3 = &cp1_eth0;
+ ethernet4 = &cp1_eth1;
+ ethernet5 = &cp1_eth2;
+ gpio1 = &cp0_gpio1;
+ gpio2 = &cp0_gpio2;
+ gpio3 = &cp1_gpio1;
+ gpio4 = &cp1_gpio2;
+ };
+
+ memory at 00000000 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&cp0_uart0 {
+ status = "okay";
+};
+
+/* on-board eMMC - U9 */
+&ap_sdhci0 {
+ pinctrl-names = "default";
+ bus-width = <8>;
+ status = "okay";
+ mmc-ddr-1_8v;
+ mmc-hs400-1_8v;
+};
+
+&cp0_crypto {
+ status = "okay";
+};
+
+&cp0_xmdio {
+ status = "okay";
+ cp0_nbaset_phy0: ethernet-phy at 0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <2>;
+ };
+ cp0_nbaset_phy1: ethernet-phy at 1 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0>;
+ };
+ cp0_nbaset_phy2: ethernet-phy at 2 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <8>;
+ };
+};
+
+&cp0_ethernet {
+ status = "okay";
+};
+
+/* SLM-1521-V2, CON9 */
+&cp0_eth0 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp0_comphy2 0>;
+ managed = "in-band-status";
+};
+
+&cp0_eth1 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp0_comphy4 1>;
+ managed = "in-band-status";
+};
+
+&cp0_eth2 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp0_comphy5 2>;
+ managed = "in-band-status";
+};
+
+&cp0_gpio1 {
+ status = "okay";
+};
+
+&cp0_gpio2 {
+ status = "okay";
+};
+
+&cp0_i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_i2c0_pins>;
+ status = "okay";
+ clock-frequency = <100000>;
+ rtc at 32 {
+ compatible = "epson,rx8130";
+ reg = <0x32>;
+ wakeup-source;
+ };
+};
+
+/* SLM-1521-V2, CON6 */
+&cp0_pcie0 {
+ status = "okay";
+ num-lanes = <2>;
+ num-viewport = <8>;
+ phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>;
+};
+
+/* U55 */
+&cp0_spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_spi0_pins>;
+ reg = <0x700680 0x50>, /* control */
+ <0x2000000 0x1000000>; /* CS0 */
+ status = "okay";
+ spi-flash at 0 {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-max-frequency = <40000000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition at 0 {
+ label = "U-Boot";
+ reg = <0x0 0x1f0000>;
+ };
+ partition at 1f0000 {
+ label = "U-Boot ENV Factory";
+ reg = <0x1f0000 0x10000>;
+ };
+ partition at 200000 {
+ label = "Reserved";
+ reg = <0x200000 0x1f0000>;
+ };
+ partition at 3f0000 {
+ label = "U-Boot ENV";
+ reg = <0x3f0000 0x10000>;
+ };
+ };
+ };
+};
+
+&cp0_syscon0 {
+ cp0_pinctrl: pinctrl {
+ compatible = "marvell,cp115-standalone-pinctrl";
+ cp0_i2c0_pins: cp0-i2c-pins-0 {
+ marvell,pins = "mpp37", "mpp38";
+ marvell,function = "i2c0";
+ };
+ cp0_i2c1_pins: cp0-i2c-pins-1 {
+ marvell,pins = "mpp35", "mpp36";
+ marvell,function = "i2c1";
+ };
+ cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 {
+ marvell,pins = "mpp0", "mpp1", "mpp2",
+ "mpp3", "mpp4", "mpp5",
+ "mpp6", "mpp7", "mpp8",
+ "mpp9", "mpp10", "mpp11";
+ marvell,function = "ge0";
+ };
+ cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 {
+ marvell,pins = "mpp44", "mpp45", "mpp46",
+ "mpp47", "mpp48", "mpp49",
+ "mpp50", "mpp51", "mpp52",
+ "mpp53", "mpp54", "mpp55";
+ marvell,function = "ge1";
+ };
+ cp0_spi0_pins: cp0-spi-pins-0 {
+ marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+ marvell,function = "spi1";
+ };
+ };
+};
+
+/*
+ * Instantiate the first connected CP115
+ */
+
+#define CP11X_NAME cp1
+#define CP11X_BASE f6000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE f6600000
+#define CP11X_PCIE1_BASE f6620000
+#define CP11X_PCIE2_BASE f6640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+&cp1_crypto {
+ status = "okay";
+};
+
+&cp1_xmdio {
+ status = "okay";
+ cp1_nbaset_phy0: ethernet-phy at 3 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <2>;
+ };
+ cp1_nbaset_phy1: ethernet-phy at 4 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0>;
+ };
+ cp1_nbaset_phy2: ethernet-phy at 5 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <8>;
+ };
+};
+
+&cp1_ethernet {
+ status = "okay";
+};
+
+/* CON50 */
+&cp1_eth0 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp1_comphy2 0>;
+ managed = "in-band-status";
+};
+
+&cp1_eth1 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp1_comphy4 1>;
+ managed = "in-band-status";
+};
+
+&cp1_eth2 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp1_comphy5 2>;
+ managed = "in-band-status";
+};
+
+&cp1_sata0 {
+ status = "okay";
+ sata-port at 1 {
+ status = "okay";
+ phys = <&cp1_comphy0 1>;
+ };
+};
+
+&cp1_gpio1 {
+ status = "okay";
+};
+
+&cp1_gpio2 {
+ status = "okay";
+};
+
+&cp1_i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_i2c0_pins>;
+ clock-frequency = <100000>;
+};
+
+&cp1_syscon0 {
+ cp1_pinctrl: pinctrl {
+ compatible = "marvell,cp115-standalone-pinctrl";
+ cp1_i2c0_pins: cp1-i2c-pins-0 {
+ marvell,pins = "mpp37", "mpp38";
+ marvell,function = "i2c0";
+ };
+ cp1_spi0_pins: cp1-spi-pins-0 {
+ marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+ marvell,function = "spi1";
+ };
+ cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins {
+ marvell,pins = "mpp3";
+ marvell,function = "gpio";
+ };
+ cp1_sfp_pins: sfp-pins {
+ marvell,pins = "mpp8", "mpp9", "mpp10", "mpp11";
+ marvell,function = "gpio";
+ };
+ };
+};
+
+&cp1_usb3_1 {
+ status = "okay";
+ phys = <&cp1_comphy3 1>;
+ phy-names = "usb";
+};
diff --git a/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts
new file mode 100644
index 0000000000..dc4e6527f1
--- /dev/null
+++ b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts
@@ -0,0 +1,481 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * Device tree for the CN9132-DB board.
+ */
+
+#include "cn9130.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "iEi Puzzle-M902";
+ compatible = "iei,puzzle-m902",
+ "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ i2c0 = &cp1_i2c0;
+ i2c1 = &cp0_i2c0;
+ gpio1 = &cp0_gpio1;
+ gpio2 = &cp0_gpio2;
+ gpio3 = &cp1_gpio1;
+ gpio4 = &cp1_gpio2;
+ gpio5 = &cp2_gpio1;
+ gpio6 = &cp2_gpio2;
+ ethernet0 = &cp0_eth0;
+ ethernet1 = &cp0_eth1;
+ ethernet2 = &cp0_eth2;
+ ethernet3 = &cp1_eth0;
+ ethernet4 = &cp1_eth1;
+ ethernet5 = &cp1_eth2;
+ ethernet6 = &cp2_eth0;
+ ethernet7 = &cp2_eth1;
+ ethernet8 = &cp2_eth2;
+ spi1 = &cp0_spi0;
+ spi2 = &cp0_spi1;
+ serial1 = &cp0_uart0;
+ };
+
+ memory at 00000000 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ cp2_reg_usb3_vbus0: cp2_usb3_vbus at 0 {
+ compatible = "regulator-fixed";
+ regulator-name = "cp2-xhci0-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ cp2_usb3_0_phy0: cp2_usb3_phy0 {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&cp2_reg_usb3_vbus0>;
+ };
+
+ cp2_reg_usb3_vbus1: cp2_usb3_vbus at 1 {
+ compatible = "regulator-fixed";
+ regulator-name = "cp2-xhci1-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ cp2_usb3_0_phy1: cp2_usb3_phy1 {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&cp2_reg_usb3_vbus1>;
+ };
+
+ cp2_sfp_eth0: sfp-eth0 {
+ compatible = "sff,sfp";
+ i2c-bus = <&cp2_sfpp0_i2c>;
+ los-gpio = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>;
+ tx-disable-gpio = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpio = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&cp0_uart0 {
+ status = "okay";
+};
+
+/* on-board eMMC - U9 */
+&ap_sdhci0 {
+ pinctrl-names = "default";
+ bus-width = <8>;
+ status = "okay";
+ mmc-ddr-1_8v;
+ mmc-hs400-1_8v;
+};
+
+&cp0_crypto {
+ status = "okay";
+};
+
+&cp0_xmdio {
+ status = "okay";
+ cp0_nbaset_phy0: ethernet-phy at 0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <2>;
+ };
+ cp0_nbaset_phy1: ethernet-phy at 1 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0>;
+ };
+ cp0_nbaset_phy2: ethernet-phy at 2 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <8>;
+ };
+};
+
+&cp0_ethernet {
+ status = "okay";
+};
+
+/* SLM-1521-V2, CON9 */
+&cp0_eth0 {
+ status = "okay";
+ phy-mode = "10gbase-kr";
+ phys = <&cp0_comphy2 0>;
+ managed = "in-band-status";
+};
+
+&cp0_eth1 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp0_comphy4 1>;
+ managed = "in-band-status";
+};
+
+&cp0_eth2 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp0_comphy1 2>;
+ managed = "in-band-status";
+};
+
+&cp0_gpio1 {
+ status = "okay";
+};
+
+&cp0_gpio2 {
+ status = "okay";
+};
+
+&cp0_i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_i2c0_pins>;
+ status = "okay";
+ clock-frequency = <100000>;
+ rtc at 32 {
+ compatible = "epson,rx8130";
+ reg = <0x32>;
+ wakeup-source;
+ };
+};
+
+&cp0_i2c1 {
+ clock-frequency = <100000>;
+};
+
+/* SLM-1521-V2, CON6 */
+&cp0_sata0 {
+ status = "okay";
+ sata-port at 1 {
+ status = "okay";
+ phys = <&cp0_comphy0 1>;
+ };
+};
+
+&cp0_pcie2 {
+ status = "okay";
+ num-lanes = <1>;
+ num-viewport = <8>;
+ phys = <&cp0_comphy5 2>;
+};
+
+/* U55 */
+&cp0_spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_spi0_pins>;
+ reg = <0x700680 0x50>, /* control */
+ <0x2000000 0x1000000>; /* CS0 */
+ status = "okay";
+ spi-flash at 0 {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-max-frequency = <40000000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition at 0 {
+ label = "U-Boot";
+ reg = <0x0 0x1f0000>;
+ };
+ partition at 1f0000 {
+ label = "U-Boot ENV Factory";
+ reg = <0x1f0000 0x10000>;
+ };
+ partition at 200000 {
+ label = "Reserved";
+ reg = <0x200000 0x1f0000>;
+ };
+ partition at 3f0000 {
+ label = "U-Boot ENV";
+ reg = <0x3f0000 0x10000>;
+ };
+ };
+ };
+};
+
+&cp0_syscon0 {
+ cp0_pinctrl: pinctrl {
+ compatible = "marvell,cp115-standalone-pinctrl";
+ cp0_i2c0_pins: cp0-i2c-pins-0 {
+ marvell,pins = "mpp37", "mpp38";
+ marvell,function = "i2c0";
+ };
+ cp0_i2c1_pins: cp0-i2c-pins-1 {
+ marvell,pins = "mpp35", "mpp36";
+ marvell,function = "i2c1";
+ };
+ cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 {
+ marvell,pins = "mpp0", "mpp1", "mpp2",
+ "mpp3", "mpp4", "mpp5",
+ "mpp6", "mpp7", "mpp8",
+ "mpp9", "mpp10", "mpp11";
+ marvell,function = "ge0";
+ };
+ cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 {
+ marvell,pins = "mpp44", "mpp45", "mpp46",
+ "mpp47", "mpp48", "mpp49",
+ "mpp50", "mpp51", "mpp52",
+ "mpp53", "mpp54", "mpp55";
+ marvell,function = "ge1";
+ };
+ cp0_spi0_pins: cp0-spi-pins-0 {
+ marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+ marvell,function = "spi1";
+ };
+ };
+};
+
+&cp0_usb3_1 {
+ status = "okay";
+ phys = <&cp0_comphy3 1>;
+ phy-names = "usb";
+};
+
+/*
+ * Instantiate the first connected CP115
+ */
+
+#define CP11X_NAME cp1
+#define CP11X_BASE f4000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE f4600000
+#define CP11X_PCIE1_BASE f4620000
+#define CP11X_PCIE2_BASE f4640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+&cp1_crypto {
+ status = "okay";
+};
+
+&cp1_xmdio {
+ status = "okay";
+ cp1_nbaset_phy0: ethernet-phy at 3 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <2>;
+ };
+ cp1_nbaset_phy1: ethernet-phy at 4 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0>;
+ };
+ cp1_nbaset_phy2: ethernet-phy at 5 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <8>;
+ };
+};
+
+&cp1_ethernet {
+ status = "okay";
+};
+
+/* CON50 */
+&cp1_eth0 {
+ status = "okay";
+ phy-mode = "10gbase-kr";
+ phys = <&cp1_comphy2 0>;
+ managed = "in-band-status";
+};
+
+&cp1_eth1 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp1_comphy4 1>;
+ managed = "in-band-status";
+};
+
+&cp1_eth2 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp1_comphy1 2>;
+ managed = "in-band-status";
+};
+
+&cp1_gpio1 {
+ status = "okay";
+};
+
+&cp1_gpio2 {
+ status = "okay";
+};
+
+&cp1_i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_i2c0_pins>;
+ clock-frequency = <100000>;
+};
+
+&cp1_syscon0 {
+ cp1_pinctrl: pinctrl {
+ compatible = "marvell,cp115-standalone-pinctrl";
+ cp1_i2c0_pins: cp1-i2c-pins-0 {
+ marvell,pins = "mpp37", "mpp38";
+ marvell,function = "i2c0";
+ };
+ cp1_spi0_pins: cp1-spi-pins-0 {
+ marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+ marvell,function = "spi1";
+ };
+ cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins {
+ marvell,pins = "mpp3";
+ marvell,function = "gpio";
+ };
+ };
+};
+
+/*
+ * Instantiate the second connected CP115
+ */
+
+#define CP11X_NAME cp2
+#define CP11X_BASE f6000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE f6600000
+#define CP11X_PCIE1_BASE f6620000
+#define CP11X_PCIE2_BASE f6640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+&cp2_crypto {
+ status = "okay";
+};
+
+&cp2_ethernet {
+ status = "okay";
+};
+
+&cp2_xmdio {
+ status = "okay";
+ cp2_nbaset_phy0: ethernet-phy at 6 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <2>;
+ };
+ cp2_nbaset_phy1: ethernet-phy at 7 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0>;
+ };
+ cp2_nbaset_phy2: ethernet-phy at 8 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <8>;
+ };
+};
+
+/* SLM-1521-V2, CON9 */
+&cp2_eth0 {
+ status = "okay";
+ phy-mode = "10gbase-kr";
+ phys = <&cp2_comphy2 0>;
+ managed = "in-band-status";
+};
+
+&cp2_eth1 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp2_comphy4 1>;
+ managed = "in-band-status";
+};
+
+&cp2_eth2 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp2_comphy1 2>;
+ managed = "in-band-status";
+};
+
+&cp2_gpio1 {
+ status = "okay";
+};
+
+&cp2_gpio2 {
+ status = "okay";
+};
+
+&cp2_i2c0 {
+ clock-frequency = <100000>;
+ /* SLM-1521-V2 - U3 */
+ i2c-mux at 72 {
+ compatible = "nxp,pca9544";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x72>;
+ cp2_sfpp0_i2c: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* U12 */
+ cp2_module_expander1: pca9555 at 21 {
+ compatible = "nxp,pca9555";
+ pinctrl-names = "default";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x21>;
+ };
+ };
+ };
+};
+
+&cp2_syscon0 {
+ cp2_pinctrl: pinctrl {
+ compatible = "marvell,cp115-standalone-pinctrl";
+ cp2_i2c0_pins: cp2-i2c-pins-0 {
+ marvell,pins = "mpp37", "mpp38";
+ marvell,function = "i2c0";
+ };
+ };
+};
diff --git a/target/linux/mvebu/image/cortexa72.mk b/target/linux/mvebu/image/cortexa72.mk
index 1440c07a0b..29727f8b9d 100644
--- a/target/linux/mvebu/image/cortexa72.mk
+++ b/target/linux/mvebu/image/cortexa72.mk
@@ -43,3 +43,21 @@ define Device/marvell_macchiatobin-singleshot
SUPPORTED_DEVICES := marvell,armada8040-mcbin-singleshot
endef
TARGET_DEVICES += marvell_macchiatobin-singleshot
+
+define Device/iei_puzzle-m901
+ $(call Device/Default-arm64)
+ DEVICE_VENDOR := iEi
+ DEVICE_MODEL := Puzzle-M901
+ SOC := cn9131
+ IMAGE/sdcard.img.gz := boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata
+endef
+TARGET_DEVICES += iei_puzzle-m901
+
+define Device/iei_puzzle-m902
+ $(call Device/Default-arm64)
+ DEVICE_VENDOR := iEi
+ DEVICE_MODEL := Puzzle-M902
+ SOC := cn9132
+ IMAGE/sdcard.img.gz := boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata
+endef
+TARGET_DEVICES += iei_puzzle-m902
--
2.17.1
More information about the openwrt-devel
mailing list