Release goals for 22.XX

Stefan Lippers-Hollmann s.l-h at gmx.de
Sun Oct 10 14:59:06 PDT 2021


Hi

On 2021-10-10, Hauke Mehrtens wrote:
> On 10/10/21 2:44 AM, Sergey Ryazanov wrote:
> > On Fri, Oct 8, 2021 at 4:40 PM Rui Salvaterra <rsalvaterra at gmail.com> wrote:
> >> On Fri, 8 Oct 2021 at 11:09, Rui Salvaterra <rsalvaterra at gmail.com> wrote:
[...]
> > I am in the process of migrating ath25 to the 5.10 kernel. Initial
> > build was trivial. But I need to restore the Marvel swconfig driver
> > that was lost during the initial 5.10 kernel introduction, and
> > carefully run-time test it.
>
> Hi,
>
> Does it make sense to directly convert this board to the upstream DSA
> driver for the Marvell 88E6060 switch:
> https://elixir.bootlin.com/linux/v5.10.72/source/drivers/net/dsa/mv88e6060.c
> It looks like our swconfig driver creates a bridge over all ports and
> the DSA driver only allows communication between the individual port and
> the CPU port.

mv88e6060 has already been used by the tl-wr941nd v2/ v3 (very early
ath79/ tiny) for many years, this might help for reference.

https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=target/linux/ath79/dts/ar9132_tplink_tl-wr941-v2.dts;h=58586eb03615b3ef959631824fcead21e077e12b;hb=HEAD#l64

Regards
	Stefan Lippers-Hollmann



More information about the openwrt-devel mailing list