[PATCH v2 1/2] realtek: enable pca953x driver for target

[INAGAKI Hiroshi]

The system status LED on Panasonic Switch-M8eG PN28080K is connected to
a PCA9539PW. To use the LED as a status LED of OpenWrt while booting,
enable the pca953x driver and built-in to the kernel.
Also enable CONFIG_GPIO_PCA953X_IRQ to use interrupt via RTL83xx GPIO.

Signed-off-by: INAGAKI Hiroshi <musashino.open at gmail.com>
---
v1 -> v2:

- drop changes in config-5.4
- enable CONFIG_GPIO_PCA953X_IRQ to use interrupt

 target/linux/realtek/config-5.10 | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/target/linux/realtek/config-5.10 b/target/linux/realtek/config-5.10
index f75cf92897..33409d693d 100644
--- a/target/linux/realtek/config-5.10
+++ b/target/linux/realtek/config-5.10
@@ -70,6 +70,8 @@ CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIOLIB_IRQCHIP=y
 CONFIG_GPIO_GENERIC=y
+CONFIG_GPIO_PCA953X=y
+CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_GPIO_REALTEK_OTTO=y
 CONFIG_GPIO_RTL8231=y
 CONFIG_GPIO_RTL838X=y
@@ -165,6 +167,7 @@ CONFIG_REALTEK_OTTO_WDT=y
 CONFIG_REALTEK_PHY=y
 CONFIG_REALTEK_SOC_PHY=y
 CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=y
 CONFIG_REGMAP_MMIO=y
 CONFIG_RESET_CONTROLLER=y
 CONFIG_RTL838X=y
-- 
2.33.0.windows.2