No subject

[Henrik Ginstmark]

Hi

Is it possible to add dms_get_operating_mode command?
Then it would be possible to verify if the modem is in flight mode or not.


BR
Henrik Ginstmark

---
commands-dms.c

@@ -375,6 +375,38 @@ qmi_set_dms_reset_request(msg);
return QMI_CMD_REQUEST;
}

+static void
+cmd_dms_get_operating_mode_cb(struct qmi_dev *qmi, struct qmi_request
*req, struct qmi_msg *msg)
+{
+ struct qmi_dms_get_operating_mode_response res;
+
+ const char *modes[] = {
+ [QMI_DMS_OPERATING_MODE_ONLINE] = "online",
+ [QMI_DMS_OPERATING_MODE_LOW_POWER] = "low_power",
+ [QMI_DMS_OPERATING_MODE_FACTORY_TEST] = "factory_test",
+ [QMI_DMS_OPERATING_MODE_OFFLINE] = "offline",
+ [QMI_DMS_OPERATING_MODE_RESET] = "reset",
+ [QMI_DMS_OPERATING_MODE_SHUTTING_DOWN] = "shutting_down",
+ [QMI_DMS_OPERATING_MODE_PERSISTENT_LOW_POWER] = "persistent_low_power",
+ [QMI_DMS_OPERATING_MODE_MODE_ONLY_LOW_POWER] = "mode_only_low_power",
+ };
+ int s = 0;
+
+ qmi_parse_dms_get_operating_mode_response(msg, &res);
+ if (res.set.mode &&
+    res.data.mode < ARRAY_SIZE(modes))
+ s = res.data.mode;
+
+ blobmsg_add_string(&status, NULL, modes[s]);
+}
+
+static enum qmi_cmd_result
+cmd_dms_get_operating_mode_prepare(struct qmi_dev *qmi, struct
qmi_request *req, struct qmi_msg *msg, char *arg)
+{
+ qmi_set_dms_get_operating_mode_request(msg);
+ return QMI_CMD_REQUEST;
+}
+
#define cmd_dms_set_operating_mode_cb no_cb
static enum qmi_cmd_result
cmd_dms_set_operating_mode_prepare(struct qmi_dev *qmi, struct
qmi_request *req, struct qmi_msg *msg, char *arg)


---
commands-dms.h

@@ -37,6 +37,7 @@
        __uqmi_command(dms_get_imsi, get-imsi, no, QMI_SERVICE_DMS), \
        __uqmi_command(dms_get_imei, get-imei, no, QMI_SERVICE_DMS), \
        __uqmi_command(dms_get_msisdn, get-msisdn, no, QMI_SERVICE_DMS), \
+       __uqmi_command(dms_get_operating_mode,
get-device-operating-mode, no, QMI_SERVICE_DMS), \
        __uqmi_command(dms_set_operating_mode,
set-device-operating-mode, required, QMI_SERVICE_DMS), \
        __uqmi_command(dms_reset, reset-dms, no, QMI_SERVICE_DMS), \
        __uqmi_command(dms_set_fcc_authentication, fcc-auth, no,
QMI_SERVICE_DMS) \
@@ -67,6 +58,7 @@
                "  --get-imei:                       Get International
Mobile Equipment ID\n" \
                "  --get-msisdn:                     Get the MSISDN
(telephone number)\n" \
                "  --reset-dms:                      Reset the DMS service\n" \
+               "  --get-device-operating-mode       Get the device
operating mode\n" \
                "  --set-device-operating-mode <m>   Set the device
operating mode\n" \
                "                                    (modes: online,
low_power, factory_test, offline\n" \
                "                                     reset,
shutting_down, persistent_low_power,\n" \