[PATCH 1/2] realtek: netgear-gigabit: Enable RTL8231

[Bjørn Mork]

Sander Vanheule <sander at svanheule.net> writes:

> To everyone in CC, could you please verify that the RTL8231 is present
> in your device(s) at address 31. On my GS110TPP the status LEDs are
> located on external GPIOs 31, 32, and 34. Other devices configure the
> same pins as outputs, so it is possible the status LED(s) is (are) also
> present on these pins on other devices. For the GS310TP, external GPIO
> functionality can also be tested through the lines for the SFP cages.

Tested on GS108Tv3.  I assume this verifies the RTL8231 presence?:

root at OpenWrt:/# dmesg|grep 8231
[    0.443725] Probing RTL8231 GPIOs
[    0.447454] rtl8231_init called, MDIO bus ID: 31


Not 100% sure, but I believe the status LED is green/amber only.  Never
seen any other color.  Don't know how you want this expressed in DT but
the gpio to colour map is

31  32
hi  hi  off
lo  hi  green
hi  lo  amber
lo  lo  off

Almost looks like the two LEDs are wired in opposite directions between
those two GPIOs.

Tried gpios 33, 34 and 35 as well without any visible effect.  Let me
know if I should test any other numbers.


Tested-by: Bjørn Mork <bjorn at mork.no>


Bjørn