banana-pi-r64 eth wan speed
Daniel Golle
daniel at makrotopia.org
Fri Nov 19 04:03:00 PST 2021
On Fri, Nov 19, 2021 at 12:47:41PM +0100, Janusz Dziedzic wrote:
> Hello,
>
> I see that my board negotiate only 100mbps on wan iface.
> First think cable or switch issue - but using same cable and
> same ext switch port I get 1000 when using lanX iface.
>
> Do you see the same - or my board have some issue with WAN?
At least on my board WAN is working fine with full 1Gbit/s speed:
root at bpi-r64:~# ethtool wan
Settings for wan:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: Symmetric Receive-only
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Link partner advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Link partner advertised pause frame use: Symmetric Receive-only
Link partner advertised auto-negotiation: Yes
Link partner advertised FEC modes: Not reported
Speed: 1000Mb/s
Duplex: Full
Port: MII
PHYAD: 0
Transceiver: external
Auto-negotiation: on
Supports Wake-on: d
Wake-on: d
Link detected: yes
> Fresh master used.
>
> root at OpenWrt:~# ethtool wan
> Settings for wan:
> Supported ports: [ TP MII ]
> Supported link modes: 10baseT/Half 10baseT/Full
> 100baseT/Half 100baseT/Full
> 1000baseT/Full
> Supported pause frame use: Symmetric Receive-only
> Supports auto-negotiation: Yes
> Supported FEC modes: Not reported
> Advertised link modes: 10baseT/Half 10baseT/Full
> 100baseT/Half 100baseT/Full
> 1000baseT/Full
> Advertised pause frame use: Symmetric Receive-only
> Advertised auto-negotiation: Yes
> Advertised FEC modes: Not reported
> Link partner advertised link modes: 10baseT/Half 10baseT/Full
> 100baseT/Half 100baseT/Full
> Link partner advertised pause frame use: No
> Link partner advertised auto-negotiation: Yes
> Link partner advertised FEC modes: Not reported
> Speed: 100Mb/s
> Duplex: Full
> Port: MII
> PHYAD: 0
> Transceiver: external
> Auto-negotiation: on
> Supports Wake-on: d
> Wake-on: d
> Link detected: yes
>
> root at OpenWrt:~# ethtool lan1
> Settings for lan1:
> Supported ports: [ TP MII ]
> Supported link modes: 10baseT/Half 10baseT/Full
> 100baseT/Half 100baseT/Full
> 1000baseT/Full
> Supported pause frame use: Symmetric Receive-only
> Supports auto-negotiation: Yes
> Supported FEC modes: Not reported
> Advertised link modes: 10baseT/Half 10baseT/Full
> 100baseT/Half 100baseT/Full
> 1000baseT/Full
> Advertised pause frame use: Symmetric Receive-only
> Advertised auto-negotiation: Yes
> Advertised FEC modes: Not reported
> Link partner advertised link modes: 10baseT/Half 10baseT/Full
> 100baseT/Half 100baseT/Full
> 1000baseT/Full
> Link partner advertised pause frame use: No
> Link partner advertised auto-negotiation: Yes
> Link partner advertised FEC modes: Not reported
> Speed: 1000Mb/s
> Duplex: Full
> Port: MII
> PHYAD: 1
> Transceiver: external
> Auto-negotiation: on
> Supports Wake-on: d
> Wake-on: d
> Link detected: yes
>
>
> BR
> Janusz
>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list