mac address issue of tp-link wdr3600 and archer c7-v2
Paul D
newtwen at gmail.com
Tue Nov 16 04:30:57 PST 2021
C7v2 here. 21.02
eth0: 73
eth1: 72 (br-lan)
wlan0: 71 (11n+ac, 5GHz)
wlan1: 72 (11bgn, 2.4GHz)
Works fine as is.
On 2021-11-15 21:04, e9hack wrote:
>
> Hi,
>
> I'm using two tp-link routers. Both are using the same mac address for
> one eth and one wlan interface:
>
> archer c7-v2:
> uboot 60:xx:xx:xx:xx:E6
> eth0 60:xx:xx:xx:xx:E7
> eth1 60:xx:xx:xx:xx:E6
> wlan0 60:xx:xx:xx:xx:E4 5G
> wlan1 60:xx:xx:xx:xx:E6 2.4G
>
> wdr3600:
> uboot C0:xx:xx:xx:xx:60
> eth0 C0:xx:xx:xx:xx:60
> wlan0 C0:xx:xx:xx:xx:5F 2.4G
> wlan1 C0:xx:xx:xx:xx:60 5G
>
> It looks like if an address decrement is missing for one wlan interface.
> I don't know if this can trigger a problem.
>
> With a small patch, I did fix it for both of my routers:
>
> --- a/target/linux/ath79/dts/ar9344_tplink_tl-wdr4300.dtsi
> +++ b/target/linux/ath79/dts/ar9344_tplink_tl-wdr4300.dtsi
> @@ -82,6 +82,7 @@
> &ath9k {
> nvmem-cells = <&macaddr_uboot_1fc00>;
> nvmem-cell-names = "mac-address";
> + mac-address-increment = <(-2)>;
> };
>
> &wmac {
> --- a/target/linux/ath79/dts/qca9558_tplink_archer-c7-v2.dts
> +++ b/target/linux/ath79/dts/qca9558_tplink_archer-c7-v2.dts
> @@ -64,6 +64,7 @@
>
> nvmem-cells = <&macaddr_uboot_1fc00>;
> nvmem-cell-names = "mac-address";
> + mac-address-increment = <(-1)>;
> };
>
> &uboot {
>
> Now I get:
>
> archer c7-v2:
> eth0 60:xx:xx:xx:xx:E7
> eth1 60:xx:xx:xx:xx:E6
> wlan0 60:xx:xx:xx:xx:E4 5G
> wlan1 60:xx:xx:xx:xx:E5 2.4G
>
> wdr3600:
> eth0 C0:xx:xx:xx:xx:60
> wlan0 C0:xx:xx:xx:xx:5F 2.4G
> wlan1 C0:xx:xx:xx:xx:5E 5G
>
> I don't know, if exist some rule whether decrement by -1/-2 shall refer
> to the interface number or to the frequency.
>
> Regards,
> Hartmut
>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list