[PATCH v4 5/5] realtek: Remove _machine_restart and _machine_halt
Stijn Segers
foss at volatilesystems.org
Sun Nov 14 11:45:09 PST 2021
Hi Sander,
Op zondag 14 november 2021 om 19u45 schreef Sander Vanheule
<sander at svanheule.net>:
> By dropping _machine_restart, users can provide more reliable or
> device-specific restart modes.
>
> _machine_halt was already removed in commit f4b687d1f053 ("realtek:
> use
> kernel defined halt"), but quietly reintroduced in commit 8faffa00cb6b
> ("realtek: add support for the RTL9300 timer"). Let's remove it again.
Reboot works reliably on my GS1900-8HP v1. Thanks!
Tested-by: Stijn Segers <foss at volatilesystems.org>
>
> Signed-off-by: Sander Vanheule <sander at svanheule.net>
> ---
> .../files-5.10/arch/mips/rtl838x/setup.c | 85
> -------------------
> 1 file changed, 85 deletions(-)
>
> diff --git
> a/target/linux/realtek/files-5.10/arch/mips/rtl838x/setup.c
> b/target/linux/realtek/files-5.10/arch/mips/rtl838x/setup.c
> index 752a85643728..55419c7b0b7a 100644
> --- a/target/linux/realtek/files-5.10/arch/mips/rtl838x/setup.c
> +++ b/target/linux/realtek/files-5.10/arch/mips/rtl838x/setup.c
> @@ -20,7 +20,6 @@
> #include <asm/addrspace.h>
> #include <asm/io.h>
> #include <asm/bootinfo.h>
> -#include <asm/reboot.h>
> #include <asm/time.h>
> #include <asm/prom.h>
> #include <asm/smp-ops.h>
> @@ -29,100 +28,20 @@
>
> extern struct rtl83xx_soc_info soc_info;
>
> -u32 pll_reset_value;
> -
> -static void rtl838x_restart(char *command)
> -{
> - u32 pll = sw_r32(RTL838X_PLL_CML_CTRL);
> -
> - pr_info("System restart.\n");
> - pr_info("PLL control register: %x, applying reset value %x\n",
> - pll, pll_reset_value);
> -
> - sw_w32(3, RTL838X_INT_RW_CTRL);
> - sw_w32(pll_reset_value, RTL838X_PLL_CML_CTRL);
> - sw_w32(0, RTL838X_INT_RW_CTRL);
> -
> - /* Reset Global Control1 Register */
> - sw_w32(1, RTL838X_RST_GLB_CTRL_1);
> -}
> -
> -static void rtl839x_restart(char *command)
> -{
> - /* SoC reset vector (in flash memory): on RTL839x platform
> preferred way to reset */
> - void (*f)(void) = (void *) 0xbfc00000;
> -
> - pr_info("System restart.\n");
> - /* Reset SoC */
> - sw_w32(0xFFFFFFFF, RTL839X_RST_GLB_CTRL);
> - /* and call reset vector */
> - f();
> - /* If this fails, halt the CPU */
> - while
> - (1);
> -}
> -
> -static void rtl930x_restart(char *command)
> -{
> - pr_info("System restart.\n");
> - sw_w32(0x1, RTL930X_RST_GLB_CTRL_0);
> - while
> - (1);
> -}
> -
> -static void rtl931x_restart(char *command)
> -{
> - u32 v;
> -
> - pr_info("System restart.\n");
> - sw_w32(1, RTL931X_RST_GLB_CTRL);
> - v = sw_r32(RTL931X_RST_GLB_CTRL);
> - sw_w32(0x101, RTL931X_RST_GLB_CTRL);
> - msleep(15);
> - sw_w32(v, RTL931X_RST_GLB_CTRL);
> - msleep(15);
> - sw_w32(0x101, RTL931X_RST_GLB_CTRL);
> -}
> -
> -static void rtl838x_halt(void)
> -{
> - pr_info("System halted.\n");
> - while
> - (1);
> -}
> -
> static void __init rtl838x_setup(void)
> {
> - pr_info("Registering _machine_restart\n");
> - _machine_restart = rtl838x_restart;
> - _machine_halt = rtl838x_halt;
> -
> - /* This PLL value needs to be restored before a reset and will then
> be
> - * preserved over a SoC reset. A wrong value prevents the SoC from
> - * connecting to the SPI flash controller at boot and reading the
> - * reset routine */
> - pll_reset_value = sw_r32(RTL838X_PLL_CML_CTRL);
> -
> /* Setup System LED. Bit 15 then allows to toggle it */
> sw_w32_mask(0, 3 << 16, RTL838X_LED_GLB_CTRL);
> }
>
> static void __init rtl839x_setup(void)
> {
> - pr_info("Registering _machine_restart\n");
> - _machine_restart = rtl839x_restart;
> - _machine_halt = rtl838x_halt;
> -
> /* Setup System LED. Bit 14 of RTL839X_LED_GLB_CTRL then allows to
> toggle it */
> sw_w32_mask(0, 3 << 15, RTL839X_LED_GLB_CTRL);
> }
>
> static void __init rtl930x_setup(void)
> {
> - pr_info("Registering _machine_restart\n");
> - _machine_restart = rtl930x_restart;
> - _machine_halt = rtl838x_halt;
> -
> if (soc_info.id == 0x9302)
> sw_w32_mask(0, 3 << 13, RTL9302_LED_GLB_CTRL);
> else
> @@ -131,9 +50,6 @@ static void __init rtl930x_setup(void)
>
> static void __init rtl931x_setup(void)
> {
> - pr_info("Registering _machine_restart\n");
> - _machine_restart = rtl931x_restart;
> - _machine_halt = rtl838x_halt;
> sw_w32_mask(0, 3 << 12, RTL931X_LED_GLB_CTRL);
> }
>
> @@ -142,7 +58,6 @@ void __init plat_mem_setup(void)
> void *dtb;
>
> set_io_port_base(KSEG1);
> - _machine_restart = rtl838x_restart;
>
> if (fw_passed_dtb) /* UHI interface */
> dtb = (void *)fw_passed_dtb;
> --
> 2.33.1
>
>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list