[PATCH 0/3] realtek: add support for Panasonic Switch-M8eG PN28080K

Sander Vanheule sander at svanheule.net
Fri Nov 12 13:00:10 PST 2021


Hi,

On Sun, 2021-10-03 at 15:53 +0900, INAGAKI Hiroshi wrote:
[...]

> 
> INAGAKI Hiroshi (3):
>   realtek: enable pca953x driver for target
>   realtek: enable gpio-restart driver in target
>   realtek: add support for Panasonic Switch-M8eG PN28080K
> 
>  target/linux/realtek/config-5.10              |   4 +
>  target/linux/realtek/config-5.4               |   4 +
>  .../rtl8380_panasonic_m8eg-pn28080k.dts       | 103 ++++++++
>  .../rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi     | 216 +++++++++++++++++
>  .../rtl8380_panasonic_m8eg-pn28080k.dts       | 107 +++++++++
>  .../rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi     | 220 ++++++++++++++++++
>  target/linux/realtek/image/Makefile           |  10 +
>  7 files changed, 664 insertions(+)
>  create mode 100644 target/linux/realtek/dts-5.10/rtl8380_panasonic_m8eg-pn28080k.dts
>  create mode 100644 target/linux/realtek/dts-5.10/rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi
>  create mode 100644 target/linux/realtek/dts-5.4/rtl8380_panasonic_m8eg-pn28080k.dts
>  create mode 100644 target/linux/realtek/dts-5.4/rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi

I guess this is more a question for the maintainers: Since the realtek target now uses the
5.10 kernel in master, does it still make sense to add support for 5.4? Hiroshi has
backported the upstream drivers for 5.10 (thanks again!), so both kernel version now have
different quirks. Personnaly, I would prefer not to have to put any energy in 5.4 anymore.

Best,
Sander




More information about the openwrt-devel mailing list