Interface names when putting 802.1q VLAN on top of bonding configuration

[Mike Bernardo]

One more question, now I'm trying to put a bridge on top of each of these vlan* interfaces so that I can map those to a few physical interfaces. I also need several vlans to map to one of the interfaces (tagged).. not sure how to do that yet either. Any suggestions with this config? When I apply it, I lose network access.

It looks wrong that after applying the below config, that br-bv10 is now a master for vlan10 at bonding-lanxge

69: vlan10 at bonding-lanxge: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-bv10 state UP group default qlen 1000

Also, is there any way to not need 'option ipaddr 127.0.0.2' in the lanxge interface?

config interface 'loopback'
	option ifname 'lo'
	option proto 'static'
	option ipaddr '127.0.0.1'
	option netmask '255.0.0.0'

config globals 'globals'
	option ula_prefix 'fdb9:bf48:0362::/48'

config interface lanxge
	option proto 'bonding'
	option auto '1'
	option bonding_policy '802.3ad'
	option link_monitoring 'mii'
	option slaves 'eth4 eth5'
	option lacp_rate 'fast'
	option miimon '100'
	option use_carrier 1
	option xmit_hash_policy 'layer3+4'
	option force_link '1'
	option ipaddr 127.0.0.2

config device
	option type 8021q
	option ifname bonding-lanxge
	option vid 10
	option name vlan10

config interface vlan10
	option ifname vlan10
	option proto static
	option ipaddr 172.20.32.250
	option netmask 255.255.255.0

config device
	option type 8021q
	option ifname bonding-lanxge
	option vid 20
	option name vlan20

config interface vlan20
	option ifname vlan20
	option proto static
	option ipaddr 172.20.34.2
	option netmask 255.255.255.128

config device
	option type 8021q
	option ifname bonding-lanxge
	option vid 21
	option name vlan21

config interface vlan21
	option ifname vlan21
	option proto static
	option ipaddr 172.20.35.3
	option netmask 255.255.255.240

config device
	option type 8021q
	option ifname bonding-lanxge
	option vid 30
	option name vlan30

config interface vlan30
	option ifname vlan30
	option proto static
	option ipaddr 172.20.34.130
	option netmask 255.255.255.128

config interface 'wan'
       option ifname 'eth0.0'
       option proto 'dhcp'

config interface bv10
	option type 'bridge'
	option ifname vlan10
	option auto '1'
	option force_link '1'

config interface bv20
	option type 'bridge'
	option ifname vlan20
	option auto '1'
	option force_link '1'

config interface bv21
	option type 'bridge'
	option ifname vlan21
	option auto '1'
	option force_link '1'

config interface bv30
	option type 'bridge'
	option ifname vlan30
	option auto '1'
	option force_link '1'


> On 2021/05/28, at 10:52:25 CDT (-05:00), Mike Bernardo <mike at aion.cx> wrote:
> 
> Ah thanks! This worked great. I swear I tried something nearly identical before that broke everything.
> 
> Mike
> 
>> On 2021/05/28, at 02:34:44 CDT (-05:00), Jo-Philipp Wich <jo at mein.io> wrote:
>> 
>> Hi,
>> 
>> the following should do what you want.
>> 
>> config device
>> option type 8021q
>> option ifname bonding-lan
>> option vid 20
>> option name vlan20
>> 
>> config interface vlan20
>> option ifname vlan20
>> option proto static
>> option ipaddr 172.20.34.2
>> option netmask 255.255.255.128
>> 
>> 
>> ~ Jo
>> 
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel at lists.openwrt.org
>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
> 
> 
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel