[PATCH v2] uqmi: fix network registration loop

[Baptiste Jonglez]

Applied, thanks.

Does this need to be backported to 21.02 or even 19.07?

Baptiste

On 20-04-21, thomas.richard at kontron.com wrote:
> From: Thomas Richard <thomas.richard at kontron.com>
> 
> With some debug in qmi.sh using following patch, some errors are visible
> in the registration step
> @@ -29,6 +29,7 @@ proto_qmi_init_config() {
>  }
> 
>  proto_qmi_setup() {
> +       set -x
>         local interface="$1"
>         local dataformat connstat plmn_mode mcc mnc
>         local device apn auth username password pincode delay modes pdptype
> @@ -224,6 +225,8 @@ proto_qmi_setup() {
>                 fi
>         done
> 
> +       registration=$(uqmi -s -d "$device" --get-serving-system)
> +
>         [ -n "$modes" ] && uqmi -s -d "$device" --set-network-modes "$modes" > /dev/null 2>&1
> 
>         echo "Starting network $interface"
> 
> During the boot of the system, modem could not start automatically its
> network registration.
> netifd: wan (9235): + echo 'Waiting for network registration'
> netifd: wan (9235): Waiting for network registration
> netifd: wan (9235): + local 'registration_timeout=0'
> netifd: wan (9235): + uqmi -s -d /dev/cdc-wdm1 --get-serving-system
> netifd: wan (9235): + grep '"searching"'
> netifd: wan (9235): + uqmi -s -d /dev/cdc-wdm1 --get-serving-system
> netifd: wan (9235): + registration='{"registration":"not_registered","plmn_mcc":208,"plmn_mnc":20,"plmn_description":"","roaming":true}'
> netifd: wan (9235): + '[' -n  ]
> netifd: wan (9235): + echo 'Starting network wan'
> 
> As the while loop checks only "searching" pattern, uqmi.sh script quits
> searching loop and continues whereas the modem is not registered
> 
> Other issue, after X seconds modem stops searching.
> netifd: wan (9213): + uqmi -s -d /dev/cdc-wdm0 --get-serving-system
> netifd: wan (9213): + grep '"searching"'
> netifd: wan (9213): + '[' -e /dev/cdc-wdm0 ]
> netifd: wan (9213): + '[' 3 -lt 0 -o 0 '=' 0 ]
> netifd: wan (9213): + let registration_timeout++
> netifd: wan (9213): + sleep 1
> netifd: wan (9213): + uqmi -s -d /dev/cdc-wdm0 --get-serving-system
> netifd: wan (9213): + grep '"searching"'
> netifd: wan (9213): + uqmi -s -d /dev/cdc-wdm0 --get-serving-system
> netifd: wan (9213): + registration='{"registration":"not_registered"}'
> netifd: wan (9213): + '[' -n  ]
> netifd: wan (9213): + echo 'Starting network wan'
> netifd: wan (9213): Starting network wan
> 
> If registration_timeout is not expired, registration can be restarted
> 
> Signed-off-by: Thomas Richard <thomas.richard at kontron.com>
> ---
>  package/network/utils/uqmi/Makefile                |  2 +-
>  .../utils/uqmi/files/lib/netifd/proto/qmi.sh       | 35 ++++++++++++++++------
>  2 files changed, 27 insertions(+), 10 deletions(-)
> 
> diff --git a/package/network/utils/uqmi/Makefile b/package/network/utils/uqmi/Makefile
> index 68958a3729..da54ba0f46 100644
> --- a/package/network/utils/uqmi/Makefile
> +++ b/package/network/utils/uqmi/Makefile
> @@ -1,7 +1,7 @@
>  include $(TOPDIR)/rules.mk
>  
>  PKG_NAME:=uqmi
> -PKG_RELEASE:=2
> +PKG_RELEASE:=3
>  
>  PKG_SOURCE_PROTO:=git
>  PKG_SOURCE_URL=$(PROJECT_GIT)/project/uqmi.git
> diff --git a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
> index a6c785eb56..c0134f44dd 100755
> --- a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
> +++ b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
> @@ -209,19 +209,36 @@ proto_qmi_setup() {
>  
>  	uqmi -s -d "$device" --sync > /dev/null 2>&1
>  
> +	uqmi -s -d "$device" --network-register > /dev/null 2>&1
> +
>  	echo "Waiting for network registration"
> +	sleep 1
>  	local registration_timeout=0
> -	while uqmi -s -d "$device" --get-serving-system | grep '"searching"' > /dev/null; do
> -		[ -e "$device" ] || return 1
> -		if [ "$registration_timeout" -lt "$timeout" -o "$timeout" = "0" ]; then
> -			let registration_timeout++
> -			sleep 1;
> +	local registration_state=""
> +	while true; do
> +		registration_state=$(uqmi -s -d "$device" --get-serving-system 2>/dev/null | jsonfilter -e "@.registration" 2>/dev/null)
> +
> +		[ "$registration_state" = "registered" ] && break
> +
> +		if [ "$registration_state" = "searching" ] || [ "$registration_state" = "not_registered" ]; then
> +			if [ "$registration_timeout" -lt "$timeout" ] || [ "$timeout" = "0" ]; then
> +				[ "$registration_state" = "searching" ] || {
> +					echo "Device stopped network registration. Restart network registration"
> +					uqmi -s -d "$device" --network-register > /dev/null 2>&1
> +				}
> +				let registration_timeout++
> +				sleep 1
> +				continue
> +			fi
> +			echo "Network registration failed, registration timeout reached"
>  		else
> -			echo "Network registration failed"
> -			proto_notify_error "$interface" NETWORK_REGISTRATION_FAILED
> -			proto_block_restart "$interface"
> -			return 1
> +			# registration_state is 'registration_denied' or 'unknown' or ''
> +			echo "Network registration failed (reason: '$registration_state')"
>  		fi
> +
> +		proto_notify_error "$interface" NETWORK_REGISTRATION_FAILED
> +		proto_block_restart "$interface"
> +		return 1
>  	done
>  
>  	[ -n "$modes" ] && uqmi -s -d "$device" --set-network-modes "$modes" > /dev/null 2>&1
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.openwrt.org/pipermail/openwrt-devel/attachments/20210508/34394632/attachment.sig>