[PATCH] ipq806x: fix LAN and WAN port assignments on TP-Link AD7200

David Bauer mail at david-bauer.net
Thu Jun 3 02:53:18 PDT 2021


Hi Alex,

On 6/3/21 8:18 AM, Alex Henrie wrote:
> LAN port 4 was swapped with the WAN port and the remaining three LAN
> ports were numbered in reverse order from their labels on the case.
> 
> Fixes: 1a775a4fd033 ("ipq806x: add support for TP-Link Talon AD7200")
> Signed-off-by: Alex Henrie <alexhenrie24 at gmail.com>
> ---
>  target/linux/ipq806x/base-files/etc/board.d/02_network | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network
> index abdab89857..f0a852ece8 100644
> --- a/target/linux/ipq806x/base-files/etc/board.d/02_network
> +++ b/target/linux/ipq806x/base-files/etc/board.d/02_network
> @@ -56,7 +56,6 @@ nec,wg2600hp3)
>  		"2:lan" "3:lan" "4:lan" "5:lan" "0 at eth1" "1:wan" "6 at eth0"
>  	;;
>  netgear,r7800 |\
> -tplink,ad7200 |\
>  tplink,c2600)
>  	ucidef_add_switch "switch0" \
>  		"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "6 at eth1" "5:wan" "0 at eth0"
> @@ -71,6 +70,10 @@ qcom,ipq8064-db149)
>  	ucidef_add_switch "switch0" \
>  		"1:lan" "2:lan" "3:lan" "4:lan" "6u at eth1" "5:wan" "0u at eth0"
>  	;;
> +tplink,ad7200)
> +	ucidef_add_switch "switch0" \
> +		"2:lan" "3:lan" "4:lan" "5:lan" "6 at eth1" "1:wan" "0 at eth0"

I'd suggest

"2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "6 at eth1" "1:wan" "0 at eth0"

so the case port numbering is explicitly added to the definition here.

Looks good otherwise.

Best
David
> +	;;
>  ubnt,unifi-ac-hd)
>  	ucidef_set_interface_lan "eth0 eth1"
>  	;;
> 



More information about the openwrt-devel mailing list