[PATCH] uqmi: Move to community packages repo
Arjun AK
arjunak234 at gmail.com
Thu Jul 1 12:50:19 PDT 2021
Signed-off-by: Arjun AK <arjunak234 at gmail.com>
---
package/network/utils/uqmi/Makefile | 48 --
.../utils/uqmi/files/lib/netifd/proto/qmi.sh | 471 ------------------
2 files changed, 519 deletions(-)
delete mode 100644 package/network/utils/uqmi/Makefile
delete mode 100755 package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
diff --git a/package/network/utils/uqmi/Makefile b/package/network/utils/uqmi/Makefile
deleted file mode 100644
index 53ca67230b..0000000000
--- a/package/network/utils/uqmi/Makefile
+++ /dev/null
@@ -1,48 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=uqmi
-PKG_RELEASE:=3
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL=$(PROJECT_GIT)/project/uqmi.git
-PKG_SOURCE_DATE:=2020-11-22
-PKG_SOURCE_VERSION:=0a19b5b77140465c29e2afa7d611fe93abc9672f
-PKG_MIRROR_HASH:=0a6641f8e167efd21d464b0b2aeb1fec5f974dddcdb8822fbd5d7190d0b741b4
-PKG_MAINTAINER:=Matti Laakso <malaakso at elisanet.fi>
-
-PKG_LICENSE:=GPL-2.0
-PKG_LICENSE_FILES:=
-
-PKG_FLAGS:=nonshared
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
-
-define Package/uqmi
- SECTION:=net
- CATEGORY:=Network
- SUBMENU:=WWAN
- DEPENDS:=+libubox +libblobmsg-json +kmod-usb-net +kmod-usb-net-qmi-wwan +wwan
- TITLE:=Control utility for mobile broadband modems
-endef
-
-define Package/uqmi/description
- uqmi is a command line tool for controlling mobile broadband modems using
- the QMI-protocol.
-endef
-
-TARGET_CFLAGS += \
- -I$(STAGING_DIR)/usr/include -ffunction-sections -fdata-sections
-
-TARGET_LDFLAGS += -Wl,--gc-sections
-
-CMAKE_OPTIONS += \
- -DDEBUG=1
-
-define Package/uqmi/install
- $(INSTALL_DIR) $(1)/sbin
- $(INSTALL_BIN) $(PKG_BUILD_DIR)/uqmi $(1)/sbin/
- $(CP) ./files/* $(1)/
-endef
-
-$(eval $(call BuildPackage,uqmi))
diff --git a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
deleted file mode 100755
index c0134f44dd..0000000000
--- a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
+++ /dev/null
@@ -1,471 +0,0 @@
-#!/bin/sh
-
-[ -n "$INCLUDE_ONLY" ] || {
- . /lib/functions.sh
- . ../netifd-proto.sh
- init_proto "$@"
-}
-
-proto_qmi_init_config() {
- available=1
- no_device=1
- proto_config_add_string "device:device"
- proto_config_add_string apn
- proto_config_add_string auth
- proto_config_add_string username
- proto_config_add_string password
- proto_config_add_string pincode
- proto_config_add_int delay
- proto_config_add_string modes
- proto_config_add_string pdptype
- proto_config_add_int profile
- proto_config_add_boolean dhcp
- proto_config_add_boolean dhcpv6
- proto_config_add_boolean autoconnect
- proto_config_add_int plmn
- proto_config_add_int timeout
- proto_config_add_int mtu
- proto_config_add_defaults
-}
-
-proto_qmi_setup() {
- local interface="$1"
- local dataformat connstat plmn_mode mcc mnc
- local device apn auth username password pincode delay modes pdptype
- local profile dhcp dhcpv6 autoconnect plmn timeout mtu $PROTO_DEFAULT_OPTIONS
- local ip4table ip6table
- local cid_4 pdh_4 cid_6 pdh_6
- local ip_6 ip_prefix_length gateway_6 dns1_6 dns2_6
-
- json_get_vars device apn auth username password pincode delay modes
- json_get_vars pdptype profile dhcp dhcpv6 autoconnect plmn ip4table
- json_get_vars ip6table timeout mtu $PROTO_DEFAULT_OPTIONS
-
- [ "$timeout" = "" ] && timeout="10"
-
- [ "$metric" = "" ] && metric="0"
-
- [ -n "$ctl_device" ] && device=$ctl_device
-
- [ -n "$device" ] || {
- echo "No control device specified"
- proto_notify_error "$interface" NO_DEVICE
- proto_set_available "$interface" 0
- return 1
- }
-
- [ -n "$delay" ] && sleep "$delay"
-
- device="$(readlink -f $device)"
- [ -c "$device" ] || {
- echo "The specified control device does not exist"
- proto_notify_error "$interface" NO_DEVICE
- proto_set_available "$interface" 0
- return 1
- }
-
- devname="$(basename "$device")"
- devpath="$(readlink -f /sys/class/usbmisc/$devname/device/)"
- ifname="$( ls "$devpath"/net )"
- [ -n "$ifname" ] || {
- echo "The interface could not be found."
- proto_notify_error "$interface" NO_IFACE
- proto_set_available "$interface" 0
- return 1
- }
-
- [ -n "$mtu" ] && {
- echo "Setting MTU to $mtu"
- /sbin/ip link set dev $ifname mtu $mtu
- }
-
- echo "Waiting for SIM initialization"
- local uninitialized_timeout=0
- while uqmi -s -d "$device" --get-pin-status | grep '"UIM uninitialized"' > /dev/null; do
- [ -e "$device" ] || return 1
- if [ "$uninitialized_timeout" -lt "$timeout" -o "$timeout" = "0" ]; then
- let uninitialized_timeout++
- sleep 1;
- else
- echo "SIM not initialized"
- proto_notify_error "$interface" SIM_NOT_INITIALIZED
- proto_block_restart "$interface"
- return 1
- fi
- done
-
- if uqmi -s -d "$device" --get-pin-status | grep '"Not supported"\|"Invalid QMI command"' > /dev/null; then
- [ -n "$pincode" ] && {
- uqmi -s -d "$device" --verify-pin1 "$pincode" > /dev/null || uqmi -s -d "$device" --uim-verify-pin1 "$pincode" > /dev/null || {
- echo "Unable to verify PIN"
- proto_notify_error "$interface" PIN_FAILED
- proto_block_restart "$interface"
- return 1
- }
- }
- else
- . /usr/share/libubox/jshn.sh
- json_load "$(uqmi -s -d "$device" --get-pin-status)"
- json_get_var pin1_status pin1_status
- json_get_var pin1_verify_tries pin1_verify_tries
-
- case "$pin1_status" in
- disabled)
- echo "PIN verification is disabled"
- ;;
- blocked)
- echo "SIM locked PUK required"
- proto_notify_error "$interface" PUK_NEEDED
- proto_block_restart "$interface"
- return 1
- ;;
- not_verified)
- [ "$pin1_verify_tries" -lt "3" ] && {
- echo "PIN verify count value is $pin1_verify_tries this is below the limit of 3"
- proto_notify_error "$interface" PIN_TRIES_BELOW_LIMIT
- proto_block_restart "$interface"
- return 1
- }
- if [ -n "$pincode" ]; then
- uqmi -s -d "$device" --verify-pin1 "$pincode" > /dev/null 2>&1 || uqmi -s -d "$device" --uim-verify-pin1 "$pincode" > /dev/null 2>&1 || {
- echo "Unable to verify PIN"
- proto_notify_error "$interface" PIN_FAILED
- proto_block_restart "$interface"
- return 1
- }
- else
- echo "PIN not specified but required"
- proto_notify_error "$interface" PIN_NOT_SPECIFIED
- proto_block_restart "$interface"
- return 1
- fi
- ;;
- verified)
- echo "PIN already verified"
- ;;
- *)
- echo "PIN status failed ($pin1_status)"
- proto_notify_error "$interface" PIN_STATUS_FAILED
- proto_block_restart "$interface"
- return 1
- ;;
- esac
- fi
-
- if [ -n "$plmn" ]; then
- json_load "$(uqmi -s -d "$device" --get-plmn)"
- json_get_var plmn_mode mode
- json_get_vars mcc mnc || {
- mcc=0
- mnc=0
- }
-
- if [ "$plmn" = "0" ]; then
- if [ "$plmn_mode" != "automatic" ]; then
- mcc=0
- mnc=0
- echo "Setting PLMN to auto"
- fi
- elif [ "$mcc" -ne "${plmn:0:3}" -o "$mnc" -ne "${plmn:3}" ]; then
- mcc=${plmn:0:3}
- mnc=${plmn:3}
- echo "Setting PLMN to $plmn"
- else
- mcc=""
- mnc=""
- fi
- fi
-
- if [ -n "$mcc" -a -n "$mnc" ]; then
- uqmi -s -d "$device" --set-plmn --mcc "$mcc" --mnc "$mnc" > /dev/null 2>&1 || {
- echo "Unable to set PLMN"
- proto_notify_error "$interface" PLMN_FAILED
- proto_block_restart "$interface"
- return 1
- }
- fi
-
- # Cleanup current state if any
- uqmi -s -d "$device" --stop-network 0xffffffff --autoconnect > /dev/null 2>&1
-
- # Go online
- uqmi -s -d "$device" --set-device-operating-mode online > /dev/null 2>&1
-
- # Set IP format
- uqmi -s -d "$device" --set-data-format 802.3 > /dev/null 2>&1
- uqmi -s -d "$device" --wda-set-data-format 802.3 > /dev/null 2>&1
- dataformat="$(uqmi -s -d "$device" --wda-get-data-format)"
-
- if [ "$dataformat" = '"raw-ip"' ]; then
-
- [ -f /sys/class/net/$ifname/qmi/raw_ip ] || {
- echo "Device only supports raw-ip mode but is missing this required driver attribute: /sys/class/net/$ifname/qmi/raw_ip"
- return 1
- }
-
- echo "Device does not support 802.3 mode. Informing driver of raw-ip only for $ifname .."
- echo "Y" > /sys/class/net/$ifname/qmi/raw_ip
- fi
-
- uqmi -s -d "$device" --sync > /dev/null 2>&1
-
- uqmi -s -d "$device" --network-register > /dev/null 2>&1
-
- echo "Waiting for network registration"
- sleep 1
- local registration_timeout=0
- local registration_state=""
- while true; do
- registration_state=$(uqmi -s -d "$device" --get-serving-system 2>/dev/null | jsonfilter -e "@.registration" 2>/dev/null)
-
- [ "$registration_state" = "registered" ] && break
-
- if [ "$registration_state" = "searching" ] || [ "$registration_state" = "not_registered" ]; then
- if [ "$registration_timeout" -lt "$timeout" ] || [ "$timeout" = "0" ]; then
- [ "$registration_state" = "searching" ] || {
- echo "Device stopped network registration. Restart network registration"
- uqmi -s -d "$device" --network-register > /dev/null 2>&1
- }
- let registration_timeout++
- sleep 1
- continue
- fi
- echo "Network registration failed, registration timeout reached"
- else
- # registration_state is 'registration_denied' or 'unknown' or ''
- echo "Network registration failed (reason: '$registration_state')"
- fi
-
- proto_notify_error "$interface" NETWORK_REGISTRATION_FAILED
- proto_block_restart "$interface"
- return 1
- done
-
- [ -n "$modes" ] && uqmi -s -d "$device" --set-network-modes "$modes" > /dev/null 2>&1
-
- echo "Starting network $interface"
-
- pdptype=$(echo "$pdptype" | awk '{print tolower($0)}')
- [ "$pdptype" = "ip" -o "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] || pdptype="ip"
-
- if [ "$pdptype" = "ip" ]; then
- [ -z "$autoconnect" ] && autoconnect=1
- [ "$autoconnect" = 0 ] && autoconnect=""
- else
- [ "$autoconnect" = 1 ] || autoconnect=""
- fi
-
- [ "$pdptype" = "ip" -o "$pdptype" = "ipv4v6" ] && {
- cid_4=$(uqmi -s -d "$device" --get-client-id wds)
- if ! [ "$cid_4" -eq "$cid_4" ] 2> /dev/null; then
- echo "Unable to obtain client ID"
- proto_notify_error "$interface" NO_CID
- return 1
- fi
-
- uqmi -s -d "$device" --set-client-id wds,"$cid_4" --set-ip-family ipv4 > /dev/null 2>&1
-
- pdh_4=$(uqmi -s -d "$device" --set-client-id wds,"$cid_4" \
- --start-network \
- ${apn:+--apn $apn} \
- ${profile:+--profile $profile} \
- ${auth:+--auth-type $auth} \
- ${username:+--username $username} \
- ${password:+--password $password} \
- ${autoconnect:+--autoconnect})
-
- # pdh_4 is a numeric value on success
- if ! [ "$pdh_4" -eq "$pdh_4" ] 2> /dev/null; then
- echo "Unable to connect IPv4"
- uqmi -s -d "$device" --set-client-id wds,"$cid_4" --release-client-id wds > /dev/null 2>&1
- proto_notify_error "$interface" CALL_FAILED
- return 1
- fi
-
- # Check data connection state
- connstat=$(uqmi -s -d "$device" --get-data-status)
- [ "$connstat" == '"connected"' ] || {
- echo "No data link!"
- uqmi -s -d "$device" --set-client-id wds,"$cid_4" --release-client-id wds > /dev/null 2>&1
- proto_notify_error "$interface" CALL_FAILED
- return 1
- }
- }
-
- [ "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] && {
- cid_6=$(uqmi -s -d "$device" --get-client-id wds)
- if ! [ "$cid_6" -eq "$cid_6" ] 2> /dev/null; then
- echo "Unable to obtain client ID"
- proto_notify_error "$interface" NO_CID
- return 1
- fi
-
- uqmi -s -d "$device" --set-client-id wds,"$cid_6" --set-ip-family ipv6 > /dev/null 2>&1
-
- pdh_6=$(uqmi -s -d "$device" --set-client-id wds,"$cid_6" \
- --start-network \
- ${apn:+--apn $apn} \
- ${profile:+--profile $profile} \
- ${auth:+--auth-type $auth} \
- ${username:+--username $username} \
- ${password:+--password $password} \
- ${autoconnect:+--autoconnect})
-
- # pdh_6 is a numeric value on success
- if ! [ "$pdh_6" -eq "$pdh_6" ] 2> /dev/null; then
- echo "Unable to connect IPv6"
- uqmi -s -d "$device" --set-client-id wds,"$cid_6" --release-client-id wds > /dev/null 2>&1
- proto_notify_error "$interface" CALL_FAILED
- return 1
- fi
-
- # Check data connection state
- connstat=$(uqmi -s -d "$device" --get-data-status)
- [ "$connstat" == '"connected"' ] || {
- echo "No data link!"
- uqmi -s -d "$device" --set-client-id wds,"$cid_6" --release-client-id wds > /dev/null 2>&1
- proto_notify_error "$interface" CALL_FAILED
- return 1
- }
- }
-
- echo "Setting up $ifname"
- proto_init_update "$ifname" 1
- proto_set_keep 1
- proto_add_data
- [ -n "$pdh_4" ] && {
- json_add_string "cid_4" "$cid_4"
- json_add_string "pdh_4" "$pdh_4"
- }
- [ -n "$pdh_6" ] && {
- json_add_string "cid_6" "$cid_6"
- json_add_string "pdh_6" "$pdh_6"
- }
- proto_close_data
- proto_send_update "$interface"
-
- local zone="$(fw3 -q network "$interface" 2>/dev/null)"
-
- [ -n "$pdh_6" ] && {
- if [ -z "$dhcpv6" -o "$dhcpv6" = 0 ]; then
- json_load "$(uqmi -s -d $device --set-client-id wds,$cid_6 --get-current-settings)"
- json_select ipv6
- json_get_var ip_6 ip
- json_get_var gateway_6 gateway
- json_get_var dns1_6 dns1
- json_get_var dns2_6 dns2
- json_get_var ip_prefix_length ip-prefix-length
-
- proto_init_update "$ifname" 1
- proto_set_keep 1
- proto_add_ipv6_address "$ip_6" "128"
- proto_add_ipv6_prefix "${ip_6}/${ip_prefix_length}"
- proto_add_ipv6_route "$gateway_6" "128"
- [ "$defaultroute" = 0 ] || proto_add_ipv6_route "::0" 0 "$gateway_6" "" "" "${ip_6}/${ip_prefix_length}"
- [ "$peerdns" = 0 ] || {
- proto_add_dns_server "$dns1_6"
- proto_add_dns_server "$dns2_6"
- }
- [ -n "$zone" ] && {
- proto_add_data
- json_add_string zone "$zone"
- proto_close_data
- }
- proto_send_update "$interface"
- else
- json_init
- json_add_string name "${interface}_6"
- json_add_string ifname "@$interface"
- json_add_string proto "dhcpv6"
- [ -n "$ip6table" ] && json_add_string ip6table "$ip6table"
- proto_add_dynamic_defaults
- # RFC 7278: Extend an IPv6 /64 Prefix to LAN
- json_add_string extendprefix 1
- [ -n "$zone" ] && json_add_string zone "$zone"
- json_close_object
- ubus call network add_dynamic "$(json_dump)"
- fi
- }
-
- [ -n "$pdh_4" ] && {
- if [ "$dhcp" = 0 ]; then
- json_load "$(uqmi -s -d $device --set-client-id wds,$cid_4 --get-current-settings)"
- json_select ipv4
- json_get_var ip_4 ip
- json_get_var gateway_4 gateway
- json_get_var dns1_4 dns1
- json_get_var dns2_4 dns2
- json_get_var subnet_4 subnet
-
- proto_init_update "$ifname" 1
- proto_set_keep 1
- proto_add_ipv4_address "$ip_4" "$subnet_4"
- proto_add_ipv4_route "$gateway_4" "128"
- [ "$defaultroute" = 0 ] || proto_add_ipv4_route "0.0.0.0" 0 "$gateway_4"
- [ "$peerdns" = 0 ] || {
- proto_add_dns_server "$dns1_4"
- proto_add_dns_server "$dns2_4"
- }
- [ -n "$zone" ] && {
- proto_add_data
- json_add_string zone "$zone"
- proto_close_data
- }
- proto_send_update "$interface"
- else
- json_init
- json_add_string name "${interface}_4"
- json_add_string ifname "@$interface"
- json_add_string proto "dhcp"
- [ -n "$ip4table" ] && json_add_string ip4table "$ip4table"
- proto_add_dynamic_defaults
- [ -n "$zone" ] && json_add_string zone "$zone"
- json_close_object
- ubus call network add_dynamic "$(json_dump)"
- fi
- }
-}
-
-qmi_wds_stop() {
- local cid="$1"
- local pdh="$2"
-
- [ -n "$cid" ] || return
-
- uqmi -s -d "$device" --set-client-id wds,"$cid" \
- --stop-network 0xffffffff \
- --autoconnect > /dev/null 2>&1
-
- [ -n "$pdh" ] && {
- uqmi -s -d "$device" --set-client-id wds,"$cid" \
- --stop-network "$pdh" > /dev/null 2>&1
- }
-
- uqmi -s -d "$device" --set-client-id wds,"$cid" \
- --release-client-id wds > /dev/null 2>&1
-}
-
-proto_qmi_teardown() {
- local interface="$1"
-
- local device cid_4 pdh_4 cid_6 pdh_6
- json_get_vars device
-
- [ -n "$ctl_device" ] && device=$ctl_device
-
- echo "Stopping network $interface"
-
- json_load "$(ubus call network.interface.$interface status)"
- json_select data
- json_get_vars cid_4 pdh_4 cid_6 pdh_6
-
- qmi_wds_stop "$cid_4" "$pdh_4"
- qmi_wds_stop "$cid_6" "$pdh_6"
-
- proto_init_update "*" 0
- proto_send_update "$interface"
-}
-
-[ -n "$INCLUDE_ONLY" ] || {
- add_protocol qmi
-}
--
2.20.1
More information about the openwrt-devel
mailing list