[PATCH] iperf3: move over to packages.git

Florian Eckert fe at dev.tdt.de
Mon Jan 18 02:05:15 EST 2021



>> That package is not required for building OpenWrt so the maintenance
>> should happen over at packages.git.
> Sounds about right. I think most people prefer to use iperf anyway...

But then I would also move the iperf package to the package feed.

>> 
>> CC: Felix Fietkau <nbd at nbd.name>
>> 
>> Signed-off-by: Paul Spooren <mail at aparcar.org>
> Reviewed-by: Rosen Penev <rosenp at gmail.com
Reviewed-by: Florian Eckert <fe at dev.tdt.de

>> ---
>>  package/network/utils/iperf3/Makefile | 83 
>> ---------------------------
>>  1 file changed, 83 deletions(-)
>>  delete mode 100644 package/network/utils/iperf3/Makefile
>> 
>> diff --git a/package/network/utils/iperf3/Makefile 
>> b/package/network/utils/iperf3/Makefile
>> deleted file mode 100644
>> index 6f90bc9221..0000000000
>> --- a/package/network/utils/iperf3/Makefile
>> +++ /dev/null
>> @@ -1,83 +0,0 @@
>> -#
>> -# Copyright (C) 2007-2010 OpenWrt.org
>> -#
>> -# This is free software, licensed under the GNU General Public 
>> License v2.
>> -# See /LICENSE for more information.
>> -#
>> -
>> -include $(TOPDIR)/rules.mk
>> -
>> -PKG_NAME:=iperf
>> -PKG_VERSION:=3.9
>> -PKG_RELEASE:=1
>> -
>> -PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
>> -PKG_SOURCE_URL:=https://downloads.es.net/pub/iperf
>> -PKG_HASH:=24b63a26382325f759f11d421779a937b63ca1bc17c44587d2fcfedab60ac038
>> -
>> -PKG_MAINTAINER:=Felix Fietkau <nbd at nbd.name>
>> -PKG_LICENSE:=BSD-3-Clause
>> -
>> -PKG_BUILD_PARALLEL:=1
>> -PKG_INSTALL:=1
>> -
>> -PKG_FIXUP:=autoreconf
>> -
>> -include $(INCLUDE_DIR)/package.mk
>> -
>> -DISABLE_NLS:=
>> -
>> -define Package/iperf3/default
>> -  SECTION:=net
>> -  CATEGORY:=Network
>> -  TITLE:=Internet Protocol bandwidth measuring tool
>> -  URL:=https://github.com/esnet/iperf
>> -endef
>> -
>> -define Package/iperf3
>> -$(call Package/iperf3/default)
>> -  VARIANT:=nossl
>> -endef
>> -
>> -define Package/iperf3-ssl
>> -$(call Package/iperf3/default)
>> -  TITLE+= with iperf_auth support
>> -  VARIANT:=ssl
>> -  DEPENDS:= +libopenssl
>> -endef
>> -
>> -TARGET_CFLAGS += -D_GNU_SOURCE
>> -CONFIGURE_ARGS += --disable-shared
>> -
>> -ifeq ($(BUILD_VARIANT),ssl)
>> -       CONFIGURE_ARGS += --with-openssl="$(STAGING_DIR)/usr"
>> -else
>> -       CONFIGURE_ARGS += --without-openssl
>> -endif
>> -
>> -MAKE_FLAGS += noinst_PROGRAMS=
>> -
>> -define Package/iperf3/description
>> - Iperf is a modern alternative for measuring TCP and UDP bandwidth
>> - performance, allowing the tuning of various parameters and
>> - characteristics.
>> -endef
>> -
>> -# autoreconf fails if the README file isn't present
>> -define Build/Prepare
>> -       $(call Build/Prepare/Default)
>> -       touch $(PKG_BUILD_DIR)/README
>> -endef
>> -
>> -define Package/iperf3/install
>> -       $(INSTALL_DIR) $(1)/usr/bin
>> -       $(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/iperf3 $(1)/usr/bin/
>> -endef
>> -
>> -define Package/iperf3-ssl/install
>> -       $(INSTALL_DIR) $(1)/usr/bin
>> -       $(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/iperf3 $(1)/usr/bin/
>> -endef
>> -
>> -$(eval $(call BuildPackage,iperf3))
>> -$(eval $(call BuildPackage,iperf3-ssl))
>> --
>> 2.29.2
>> 
>> 
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel at lists.openwrt.org
>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
> 
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list