[PATCH] arm-trusted-firmware-bcm63xx: add ATF for Broadcom devices
Rafał Miłecki
zajec5 at gmail.com
Fri Dec 17 02:50:47 PST 2021
From: Rafał Miłecki <rafal at milecki.pl>
It's required by BCM4908 family devices with U-Boot. This is based on
upstream release 2.2 with Broadcom's custom GPL code imported from the
RAXE500_RAXE450-V1.0.8.70_GPL_release.zip.
Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
---
.../arm-trusted-firmware-bcm63xx/Makefile | 42 +
.../patches/2.2.patch | 250 ++
.../plat/bcm/aarch32/cortexa9_mmu.S | 232 ++
.../plat/bcm/aarch32/opteed_helper.S | 263 ++
.../src-custom/plat/bcm/aarch32/pl310_a32.S | 252 ++
.../plat/bcm/aarch32/plat_helpers.S | 115 +
.../plat/bcm/aarch64/plat_helpers.S | 117 +
.../src-custom/plat/bcm/bcm_gic.c | 85 +
.../src-custom/plat/bcm/bcm_private.h | 37 +
.../src-custom/plat/bcm/brcm_bl31_setup.c | 286 ++
.../src-custom/plat/bcm/brcm_bl32_setup.c | 485 ++++
.../src-custom/plat/bcm/brcm_pm.c | 261 ++
.../src-custom/plat/bcm/drivers/io.h | 80 +
.../plat/bcm/drivers/pmc_cpu_core.c | 917 ++++++
.../src-custom/plat/bcm/drivers/pmc_drv.c | 510 ++++
.../src-custom/plat/bcm/dt.c | 95 +
.../src-custom/plat/bcm/include/BPCM.h | 2511 +++++++++++++++++
.../bcm/include/bcm963xx/47622_map_part.h | 494 ++++
.../plat/bcm/include/bcm963xx/4908_map_part.h | 552 ++++
.../plat/bcm/include/bcm963xx/4912_map_part.h | 497 ++++
.../bcm/include/bcm963xx/63138_map_part.h | 458 +++
.../bcm/include/bcm963xx/63146_map_part.h | 530 ++++
.../bcm/include/bcm963xx/63148_map_part.h | 571 ++++
.../bcm/include/bcm963xx/63158_map_part.h | 554 ++++
.../bcm/include/bcm963xx/63178_map_part.h | 503 ++++
.../plat/bcm/include/bcm963xx/6756_map_part.h | 504 ++++
.../plat/bcm/include/bcm963xx/6813_map_part.h | 503 ++++
.../plat/bcm/include/bcm963xx/6846_map_part.h | 489 ++++
.../plat/bcm/include/bcm963xx/6855_map_part.h | 307 ++
.../plat/bcm/include/bcm963xx/6856_map_part.h | 517 ++++
.../plat/bcm/include/bcm963xx/6858_map_part.h | 506 ++++
.../plat/bcm/include/bcm963xx/6878_map_part.h | 305 ++
.../bcm/include/bcm963xx/bcm_mem_reserve.h | 96 +
.../plat/bcm/include/bcm963xx/bcmtypes.h | 162 ++
.../plat/bcm/include/bcm_map_part.h | 69 +
.../src-custom/plat/bcm/include/clk_rst.h | 85 +
.../src-custom/plat/bcm/include/command.h | 307 ++
.../src-custom/plat/bcm/include/plat_macros.S | 26 +
.../plat/bcm/include/platform_def.h | 339 +++
.../plat/bcm/include/pmc_addr_47622.h | 134 +
.../plat/bcm/include/pmc_addr_4908.h | 126 +
.../plat/bcm/include/pmc_addr_4912.h | 188 ++
.../plat/bcm/include/pmc_addr_63138.h | 218 ++
.../plat/bcm/include/pmc_addr_63146.h | 122 +
.../plat/bcm/include/pmc_addr_63148.h | 230 ++
.../plat/bcm/include/pmc_addr_63158.h | 197 ++
.../plat/bcm/include/pmc_addr_63178.h | 137 +
.../plat/bcm/include/pmc_addr_6756.h | 122 +
.../plat/bcm/include/pmc_addr_6813.h | 194 ++
.../plat/bcm/include/pmc_addr_6846.h | 90 +
.../plat/bcm/include/pmc_addr_6855.h | 106 +
.../plat/bcm/include/pmc_addr_6856.h | 132 +
.../plat/bcm/include/pmc_addr_6858.h | 162 ++
.../plat/bcm/include/pmc_addr_6878.h | 90 +
.../plat/bcm/include/pmc_cpu_core.h | 32 +
.../src-custom/plat/bcm/include/pmc_drv.h | 251 ++
.../plat/bcm/include/pmc_drv_special.h | 128 +
.../src-custom/plat/bcm/platform.mk | 88 +
.../src-custom/plat/bcm/sp_min/sp_min-bcm.mk | 1 +
.../plat/bcm/sp_min/src/opteed_main.c | 210 ++
.../src-custom/plat/bcm/topology.c | 74 +
61 files changed, 17944 insertions(+)
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/Makefile
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/patches/2.2.patch
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/aarch32/cortexa9_mmu.S
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/aarch32/opteed_helper.S
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/aarch32/pl310_a32.S
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/aarch32/plat_helpers.S
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/aarch64/plat_helpers.S
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/bcm_gic.c
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/bcm_private.h
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/brcm_bl31_setup.c
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/brcm_bl32_setup.c
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/brcm_pm.c
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/drivers/io.h
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/drivers/pmc_cpu_core.c
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/drivers/pmc_drv.c
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/dt.c
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/BPCM.h
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/47622_map_part.h
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/4908_map_part.h
create mode 100755 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/4912_map_part.h
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/63138_map_part.h
create mode 100755 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/63146_map_part.h
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/63148_map_part.h
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/63158_map_part.h
create mode 100755 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/63178_map_part.h
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/6756_map_part.h
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/6813_map_part.h
create mode 100755 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/6846_map_part.h
create mode 100755 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/6855_map_part.h
create mode 100755 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/6856_map_part.h
create mode 100755 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/6858_map_part.h
create mode 100755 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/6878_map_part.h
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/bcm_mem_reserve.h
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/bcmtypes.h
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm_map_part.h
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/clk_rst.h
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/command.h
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/plat_macros.S
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/platform_def.h
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_47622.h
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_4908.h
create mode 100755 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_4912.h
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_63138.h
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_63146.h
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_63148.h
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_63158.h
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_63178.h
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_6756.h
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_6813.h
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_6846.h
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_6855.h
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_6856.h
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_6858.h
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_6878.h
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_cpu_core.h
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_drv.h
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_drv_special.h
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/platform.mk
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/sp_min/sp_min-bcm.mk
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/sp_min/src/opteed_main.c
create mode 100644 package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/topology.c
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/Makefile b/package/boot/arm-trusted-firmware-bcm63xx/Makefile
new file mode 100644
index 0000000000..25d4a5b083
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/Makefile
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0
+
+include $(TOPDIR)/rules.mk
+
+PKG_VERSION:=2.2
+PKG_RELEASE:=$(AUTORELEASE)
+PKG_HASH:=01d9190755f752929c82bdf6b0e16868dc7a818666b84e1dbdfa4726f6bb2731
+
+PKG_MAINTAINER:=Rafał Miłecki <rafal at milecki.pl>
+
+include $(INCLUDE_DIR)/trusted-firmware-a.mk
+include $(INCLUDE_DIR)/package.mk
+
+define Trusted-Firmware-A/Default
+ PLAT:=bcm
+ DEFAULT:=y
+endef
+
+define Trusted-Firmware-A/bcm4908
+ BUILD_TARGET:=bcm4908
+ NAME:=BCM4908
+ BRCM_CHIP=4908
+ TFA_IMAGE:=bl31.bin
+endef
+
+TFA_TARGETS:= \
+ bcm4908
+
+TFA_MAKE_FLAGS += \
+ BRCM_CHIP=$(BRCM_CHIP)
+
+define Build/Prepare
+ $(call Build/Prepare/Default)
+ $(CP) src-custom/* $(PKG_BUILD_DIR)/
+endef
+
+define Package/trusted-firmware-a/install
+ $(INSTALL_DIR) $(STAGING_DIR_IMAGE)
+ $(INSTALL_DATA) $(PKG_BUILD_DIR)/build/$(PLAT)/release/$(TFA_IMAGE) $(STAGING_DIR_IMAGE)/
+endef
+
+$(eval $(call BuildPackage/Trusted-Firmware-A))
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/patches/2.2.patch b/package/boot/arm-trusted-firmware-bcm63xx/patches/2.2.patch
new file mode 100644
index 0000000000..f523c24138
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/patches/2.2.patch
@@ -0,0 +1,250 @@
+diff --git a/Makefile b/Makefile
+index 721246d..fa7fb8c 100644
+--- a/Makefile
++++ b/Makefile
+@@ -268,8 +268,9 @@ ifeq ($(findstring clang,$(notdir $(CC))),)
+ # not using clang
+ WARNINGS += -Wunused-but-set-variable \
+ -Wmaybe-uninitialized \
+- -Wpacked-bitfield-compat \
+- -Wshift-overflow=2
++ -Wpacked-bitfield-compat
++# BRCM_PATCH: Conflicts with toolchain
++# -Wshift-overflow=2
+ else
+ # using clang
+ WARNINGS += -Wshift-overflow -Wshift-sign-overflow
+@@ -283,10 +284,16 @@ CPPFLAGS = ${DEFINES} ${INCLUDES} ${MBEDTLS_INC} -nostdinc \
+ -Wmissing-include-dirs $(ERRORS) $(WARNINGS)
+ ASFLAGS += $(CPPFLAGS) $(ASFLAGS_$(ARCH)) \
+ -ffreestanding -Wa,--fatal-warnings
++# BRCM_PATCH: Code optimization for Cortex-A9 brings instability
++ifeq ($(strip $(BRCM_CHIP)),63138)
++TF_CFLAGS += $(CPPFLAGS) $(TF_CFLAGS_$(ARCH)) \
++ -ffreestanding -fno-builtin -Wall -std=gnu99 \
++ -O0 -ffunction-sections -fdata-sections
++else
+ TF_CFLAGS += $(CPPFLAGS) $(TF_CFLAGS_$(ARCH)) \
+ -ffreestanding -fno-builtin -Wall -std=gnu99 \
+ -Os -ffunction-sections -fdata-sections
+-
++endif
+ ifeq (${SANITIZE_UB},on)
+ TF_CFLAGS += -fsanitize=undefined -fno-sanitize-recover
+ endif
+@@ -364,7 +371,7 @@ INCLUDE_TBBR_MK := 1
+
+ ifneq (${SPD},none)
+ ifeq (${ARCH},aarch32)
+- $(error "Error: SPD is incompatible with AArch32.")
++# $(error "Error: SPD is incompatible with AArch32.")
+ endif
+ ifdef EL3_PAYLOAD_BASE
+ $(warning "SPD and EL3_PAYLOAD_BASE are incompatible build options.")
+@@ -718,7 +725,9 @@ endif
+ # This is done after including the platform specific makefile to allow the
+ # platform to overwrite the default options
+ ################################################################################
+-
++# BRCM_PATCH: Need to add Broadcom SoC specific platform profiles
++$(eval $(call add_define,PLATFORM_FLAVOR_${BRCM_CHIP}))
++$(eval $(call add_define,_BCM9${BRCM_CHIP}_))
+ $(eval $(call add_define,ARM_ARCH_MAJOR))
+ $(eval $(call add_define,ARM_ARCH_MINOR))
+ $(eval $(call add_define,COLD_BOOT_SINGLE_CPU))
+diff --git a/bl31/aarch64/bl31_entrypoint.S b/bl31/aarch64/bl31_entrypoint.S
+index 1ad26e4..2d4a553 100644
+--- a/bl31/aarch64/bl31_entrypoint.S
++++ b/bl31/aarch64/bl31_entrypoint.S
+@@ -12,6 +12,7 @@
+ #include <lib/pmf/pmf_asm_macros.S>
+ #include <lib/runtime_instr.h>
+ #include <lib/xlat_tables/xlat_mmu_helpers.h>
++#include <context.h>
+
+ .globl bl31_entrypoint
+ .globl bl31_warm_entrypoint
+@@ -129,6 +130,13 @@ func bl31_entrypoint
+ sub x1, x1, x0
+ bl clean_dcache_range
+
++/* BRCM_PATCH: Save the CTX_PMCR_EL0 configured by boot loader
++*/
++ msr spsel, #MODE_SP_ELX
++ mrs x17, pmcr_el0
++ str x17, [sp, #CTX_EL3STATE_OFFSET + CTX_PMCR_EL0]
++ msr spsel, #MODE_SP_EL0
++
+ b el3_exit
+ endfunc bl31_entrypoint
+
+@@ -138,6 +146,7 @@ endfunc bl31_entrypoint
+ * warmboot entrypoint
+ * --------------------------------------------------------------------
+ */
++ .align 8
+ func bl31_warm_entrypoint
+ #if ENABLE_RUNTIME_INSTRUMENTATION
+
+diff --git a/bl32/sp_min/aarch32/entrypoint.S b/bl32/sp_min/aarch32/entrypoint.S
+index 0a68475..132495e 100644
+--- a/bl32/sp_min/aarch32/entrypoint.S
++++ b/bl32/sp_min/aarch32/entrypoint.S
+@@ -153,6 +153,13 @@ func sp_min_entrypoint
+
+ /* r0 points to `smc_ctx_t` */
+ /* The PSCI cpu_context registers have been copied to `smc_ctx_t` */
++ /* BRCM_PATCH: PMCR passed from boot loader needs to be saved to initial ATF context.
++ * Othewise, PMCR setting will be lost, when ATF returns to next stage boot loader.
++ */
++ push {r1}
++ ldcopr r1, PMCR
++ str r1, [r0, #SMC_CTX_PMCR]
++ pop {r1}
+ b sp_min_exit
+ endfunc sp_min_entrypoint
+
+@@ -285,12 +292,24 @@ func sp_min_warm_entrypoint
+ #else
+ mov r0, #DISABLE_DCACHE
+ #endif
++ /* BRCM_PATCH: BCM63138 (Cortex-A9) does not support long MMU descriptor.
++ * Need to use A9 specific short MMU descriptor.
++ */
++#if defined(PLATFORM_FLAVOR_63138)
++ bl a9_l1cache_inval_d
++ bl a9_bl32_plat_enable_mmu
++#else
+ bl bl32_plat_enable_mmu
++#endif
+
+ #if SP_MIN_WITH_SECURE_FIQ
+ route_fiq_to_sp_min r0
+ #endif
+
++#if defined(SPD_opteed)
++ bl opteed_setup
++#endif
++
+ bl sp_min_warm_boot
+ bl smc_get_next_ctx
+ /* r0 points to `smc_ctx_t` */
+diff --git a/include/arch/aarch32/el3_common_macros.S b/include/arch/aarch32/el3_common_macros.S
+index 7559de4..da71fc9 100644
+--- a/include/arch/aarch32/el3_common_macros.S
++++ b/include/arch/aarch32/el3_common_macros.S
+@@ -100,8 +100,16 @@
+ * ---------------------------------------------------------------------
+ */
+ #if ((ARM_ARCH_MAJOR > 7) || defined(ARMV7_SUPPORTS_VFP)) && !(__SOFTFP__)
++ /* BRCM_PATCH: BCM63138 does not have NEON in 2nd CPU */
++#if defined (PLATFORM_FLAVOR_63138)
++ bl plat_my_core_pos
++ cmp r0, #0
++ ldreq r0, =(FPEXC_RESET_VAL | FPEXC_EN_BIT)
++ vmsreq FPEXC, r0
++#else
+ ldr r0, =(FPEXC_RESET_VAL | FPEXC_EN_BIT)
+ vmsr FPEXC, r0
++#endif
+ isb
+ #endif
+
+@@ -146,7 +154,9 @@
+ #else
+ ldr r0, =(PMCR_RESET_VAL | PMCR_DP_BIT)
+ #endif
++ /* BRCM_PATCH: Do not overwrite the setting done by BRCM boot loaders
+ stcopr r0, PMCR
++ */
+
+ /*
+ * If Data Independent Timing (DIT) functionality is implemented,
+diff --git a/include/arch/aarch64/el3_common_macros.S b/include/arch/aarch64/el3_common_macros.S
+index 378e827..c2946a8 100644
+--- a/include/arch/aarch64/el3_common_macros.S
++++ b/include/arch/aarch64/el3_common_macros.S
+@@ -155,9 +155,9 @@
+ mov_imm x0, ((PMCR_EL0_RESET_VAL | PMCR_EL0_LP_BIT | \
+ PMCR_EL0_LC_BIT | PMCR_EL0_DP_BIT) & \
+ ~(PMCR_EL0_X_BIT | PMCR_EL0_D_BIT))
+-
++ /* BRCM_PATCH: Do not overwrite the setting done by BRCM boot loaders
+ msr pmcr_el0, x0
+-
++ */
+ /* ---------------------------------------------------------------------
+ * Enable External Aborts and SError Interrupts now that the exception
+ * vectors have been setup.
+diff --git a/include/common/bl_common.h b/include/common/bl_common.h
+index 896a03f..c713b48 100644
+--- a/include/common/bl_common.h
++++ b/include/common/bl_common.h
+@@ -26,8 +26,9 @@
+ * Constants to identify the location of a memory region in a given memory
+ * layout.
+ ******************************************************************************/
+-#define TOP U(0x1)
+-#define BOTTOM U(0x0)
++/* BRCM_PATCH: Avoid symbol conflict with Broadcom */
++#define ATF_TOP U(0x1)
++#define ATF_BOTTOM U(0x0)
+
+ /*******************************************************************************
+ * Constants to indicate type of exception to the common exception handler.
+diff --git a/include/lib/cpus/aarch64/cortex_a53.h b/include/lib/cpus/aarch64/cortex_a53.h
+index 6fe67a9..d288651 100644
+--- a/include/lib/cpus/aarch64/cortex_a53.h
++++ b/include/lib/cpus/aarch64/cortex_a53.h
+@@ -11,6 +11,7 @@
+
+ /* Cortex-A53 midr for revision 0 */
+ #define CORTEX_A53_MIDR U(0x410FD030)
++#define CORTEX_B53_MIDR U(0x420F1000)
+
+ /* Retention timer tick definitions */
+ #define RETENTION_ENTRY_TICKS_2 U(0x1)
+diff --git a/lib/aarch32/misc_helpers.S b/lib/aarch32/misc_helpers.S
+index 6d2ec1c..7c9c23a 100644
+--- a/lib/aarch32/misc_helpers.S
++++ b/lib/aarch32/misc_helpers.S
+@@ -7,6 +7,7 @@
+ #include <arch.h>
+ #include <asm_macros.S>
+ #include <assert_macros.S>
++.arch_extension sec
+
+ .globl smc
+ .globl zeromem
+diff --git a/lib/cpus/aarch64/cortex_a53.S b/lib/cpus/aarch64/cortex_a53.S
+index b105de2..290c561 100644
+--- a/lib/cpus/aarch64/cortex_a53.S
++++ b/lib/cpus/aarch64/cortex_a53.S
+@@ -388,7 +388,7 @@ func cortex_a53_cpu_reg_dump
+ ret
+ endfunc cortex_a53_cpu_reg_dump
+
+-declare_cpu_ops cortex_a53, CORTEX_A53_MIDR, \
++declare_cpu_ops cortex_a53, CORTEX_B53_MIDR, \
+ cortex_a53_reset_func, \
+ cortex_a53_core_pwr_dwn, \
+ cortex_a53_cluster_pwr_dwn
+diff --git a/make_helpers/armv7-a-cpus.mk b/make_helpers/armv7-a-cpus.mk
+index 5571ab0..8b35b15 100644
+--- a/make_helpers/armv7-a-cpus.mk
++++ b/make_helpers/armv7-a-cpus.mk
+@@ -50,6 +50,14 @@ $(eval $(call add_define,ARMV7_SUPPORTS_GENERIC_TIMER))
+ $(eval $(call add_define,ARMV7_SUPPORTS_VFP))
+ endif
+
++# BRCM_PATCH: 1. BCM63138 (Cortex-A9) does have NEON.
++# 2. Even though A9 does not support LARGE_PAGE_ADDRESSING
++# needed to enable it to get compilation going.
++ifeq ($(filter yes,$(ARM_CORTEX_A9)),yes)
++$(eval $(call add_define,ARMV7_SUPPORTS_LARGE_PAGE_ADDRESSING))
++$(eval $(call add_define,ARMV7_SUPPORTS_VFP))
++endif
++
+ ifeq ($(ARM_CORTEX_A5),yes)
+ $(eval $(call add_define,ARM_CORTEX_A5))
+ endif
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/aarch32/cortexa9_mmu.S b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/aarch32/cortexa9_mmu.S
new file mode 100644
index 0000000000..81c25dc948
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/aarch32/cortexa9_mmu.S
@@ -0,0 +1,232 @@
+/*
+<:copyright-BRCM:2019:DUAL/GPL:standard
+
+ Copyright (c) 2019 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+*/
+
+#include <asm_macros.S>
+#include <platform_def.h>
+#include <cpu_macros.S>
+
+ .globl a9_mmu_set_ttbr
+ .globl a9_mmu_invalidate_tlb
+ .globl a9_mmu_set_scn
+ .globl a9_mmu_enable
+ .globl a9_l1cache_enable_d
+ .globl a9_l1cache_enable_i
+ .globl a9_gic_secure_init
+ .globl a9_l1cache_inval_d
+
+func a9_mmu_set_ttbr
+ push {r0-r12,r14}
+ // Set the access control to client so AP is checked with tlb entry
+ ldr r1, =0x55555555
+ mcr p15, 0, r1, c3, c0, 0 // Write Domain Access Control Register
+
+ // Set Translation Table base address. r0 must be preserved
+ mcr p15, 0, r0, c2, c0, 0 // Write Translation Table Base Register 0
+ isb
+ dsb
+ pop {r0-r12,r14}
+ mov pc,lr
+endfunc a9_mmu_set_ttbr
+
+func a9_mmu_invalidate_tlb
+ push {r0-r12,r14}
+ mov r0,#0
+ mcr p15,0,r0,c8,c7,0 /* Invalidate TLB */
+ isb
+ dsb
+ pop {r0-r12,r14}
+ mov pc,lr
+endfunc a9_mmu_invalidate_tlb
+
+
+
+/*
+ map_set_scn - sets number (SCN_RNG) of L1 table entries. Operates on 1 MB sections
+ r0 - L1 table paddr
+ r1 - virtual address start
+ r2 - address range in Megabytes
+ r3 - Sections' attributes
+ r4 - mapped physical start address
+ Table max size 16K (4K*4)
+*/
+
+#define WORD_SIZE 4 /* bytes */
+#define WORD_BITLEN 32 /*bitlen or shift*/
+#define WORD_ALGN 2 /* word alignment shift*/
+#define SCN_BITLEN 20 /*bitlen or shift */
+
+#define L1TBL_PA r0 /* */
+#define SCN_VA r1
+#define SCN_RNG r2
+#define SCN_ATTR r3
+#define SCN_PA r4
+#define SCN_ENTRY r5
+#define L1TBL_LEN r6
+/* NN (not nested) - meaning there are no calls to subroutine. LR is not preserved
+ registers r0-r6 are not preserved and must not be relied upon
+*/
+func a9_mmu_set_scn
+ push {r0-r12,r14}
+ mov SCN_ENTRY,#0
+ /* adjust virt/phys addresses for the loop increment */
+ lsr SCN_VA, SCN_VA, #(SCN_BITLEN)
+ lsr SCN_PA, SCN_PA, #(SCN_BITLEN)
+ /* clear 12 msb of the section attribute */
+ bfc SCN_ATTR, #SCN_BITLEN, #(WORD_BITLEN-SCN_BITLEN)
+ /* set max range not exceeding 0xfff */
+ add SCN_RNG, SCN_VA, SCN_RNG
+ cmp SCN_RNG, L1TBL_LEN
+ blt 1f
+ mov SCN_RNG, L1TBL_LEN
+1:
+ orr SCN_ENTRY, SCN_ATTR, SCN_PA, lsl #(SCN_BITLEN)
+ str SCN_ENTRY, [L1TBL_PA, SCN_VA, lsl #(WORD_ALGN)]
+ add SCN_PA, SCN_PA, #1
+ add SCN_VA, SCN_VA, #1
+ cmp SCN_VA, SCN_RNG
+ bne 1b
+ pop {r0-r12,r14}
+ mov pc,lr
+endfunc a9_mmu_set_scn
+
+/*
+ * CR1 bits (CP#15 CR1)
+ */
+#define CR_M (1 << 0) /* MMU enable */
+#define CR_C (1 << 2) /* Dcache enable */
+#define CR_Z (1 << 11) /* Program Flow Prediction */
+#define CR_I (1 << 12) /* Icache enable */
+
+
+func a9_mmu_enable
+ push {r0-r12,r14}
+ mrc p15, 0, r0, c1, c0, 0 // Read CP15 System Control register
+ orr r0, r0, #CR_M // Set M bit 0 to enable MMU
+ mcr p15, 0, r0, c1, c0, 0 // Write CP15 System Control register
+ isb
+ pop {r0-r12,r14}
+ mov pc, lr
+endfunc a9_mmu_enable
+
+
+func a9_l1cache_enable_i
+ push {r0-r12,r14}
+ mrc p15, 0, r0, c1, c0, 0 // Read Control Register configuration data
+ orr r0, r0, #CR_I // Enable I Cache
+ orr r0, r0, #CR_Z // Enable Prediction
+ mcr p15, 0, r0, c1, c0, 0 // Write Control Register configuration data
+ isb
+ pop {r0-r12,r14}
+ mov pc, lr
+endfunc a9_l1cache_enable_i
+
+
+func a9_l1cache_enable_d
+ push {r0-r12,r14}
+ mrc p15, 0, r0, c1, c0, 0 // Read Control Register configuration data
+ orr r0, r0, #CR_C // Enable D Cache
+ mcr p15, 0, r0, c1, c0, 0 // Write Control Register configuration data
+ isb
+ pop {r0-r12,r14}
+ mov pc, lr
+endfunc a9_l1cache_enable_d
+
+func a9_gic_secure_init
+ push {r0-r12,r14}
+ /* setup the GIC for non secure world. group 0 secure state, group 1 non secure state */
+ /* enable interrupt for both groups */
+ ldr r0, =GICD_BASE
+ ldr r1, =0x3
+ str r1, [r0, #GICD_CTLR_OFFSET]
+
+ /* assign all the interrupt to group 1 */
+ ldr r2, [r0, #GICD_TYPER_OFFSET]
+ and r2, r2, #0x1f
+ add r2, r2, #1
+ ldr r1, =0xffffffff
+ add r0, r0, #GICD_IGROUPR0_OFFSET
+setgroup:
+ str r1, [r0]
+ add r0, #4
+ subs r2, r2, #1
+ bne setgroup
+
+ /* enable both group interrupt in the cpu interface */
+ ldr r0, =GICC_BASE
+ ldr r1, [r0, #GICC_CTLR_OFFSET]
+ orr r1, #0x3
+ str r1, [r0]
+
+ /* set cpu priority mask view for nonsecure */
+ mov r1, #0x80
+ str r1, [r0, #GICC_PMR_OFFSET]
+ pop {r0-r12,r14}
+ mov pc, lr
+endfunc a9_gic_secure_init
+
+
+func a9_l1cache_inval_d
+ push {r0-r12,r14}
+ mrc p15, 1, r0, c0, c0, 1 @ read clidr
+ ands r3, r0, #0x7000000 @ extract loc from clidr
+ mov r3, r3, lsr #23 @ left align loc bit field
+ beq invfinished @ if loc is 0, then no need to clean
+ mov r10, #0 @ start clean at cache level 0
+invloop1:
+ add r2, r10, r10, lsr #1 @ work out 3x current cache level
+ mov r1, r0, lsr r2 @ extract cache type bits from clidr
+ and r1, r1, #7 @ mask of the bits for current cache only
+ cmp r1, #2 @ see what cache we have at this level
+ blt invskip @ skip if no cache, or just i-cache
+ mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
+ isb
+ @ but we compile with armv5
+ mrc p15, 1, r1, c0, c0, 0 @ read the new csidr
+ and r2, r1, #7 @ extract the length of the cache lines
+ add r2, r2, #4 @ add 4 (line length offset)
+ ldr r4, =0x3ff
+ ands r4, r4, r1, lsr #3 @ find maximum number on the way size
+ clz r5, r4 @ find bit position of way size increment
+ ldr r7, =0x7fff
+ ands r7, r7, r1, lsr #13 @ extract max number of the index size
+invloop2:
+ mov r9, r4 @ create working copy of max way size
+invloop3:
+ orr r6, r10, r9, lsl r5 @ factor way and cache number into r6
+ orr r6, r6, r7, lsl r2 @ factor index number into r6
+ mcr p15, 0, r6, c7, c6, 2 @ invalidate by set/way
+ subs r9, r9, #1 @ decrement the way
+ bge invloop3
+ subs r7, r7, #1 @ decrement the index
+ bge invloop2
+invskip:
+ add r10, r10, #2 @ increment cache number
+ cmp r3, r10
+ bgt invloop1
+invfinished:
+ mov r10, #0 @ swith back to cache level 0
+ mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
+ isb
+ pop {r0-r12,r14}
+ mov pc, lr
+endfunc a9_l1cache_inval_d
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/aarch32/opteed_helper.S b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/aarch32/opteed_helper.S
new file mode 100644
index 0000000000..c10c063963
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/aarch32/opteed_helper.S
@@ -0,0 +1,263 @@
+/*
+<:copyright-BRCM:2019:DUAL/GPL:standard
+
+ Copyright (c) 2019 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+*/
+#if defined(SPD_opteed)
+#include <asm_macros.S>
+
+.global save_atf_sysreg
+.global restore_atf_sysreg
+
+ .macro read_sctlr reg
+ mrc p15, 0, \reg, c1, c0, 0
+ .endm
+
+ .macro write_sctlr reg
+ mcr p15, 0, \reg, c1, c0, 0
+ .endm
+
+ .macro read_scr reg
+ mrc p15, 0, \reg, c1, c1, 0
+ .endm
+
+ .macro write_scr reg
+ mcr p15, 0, \reg, c1, c1, 0
+ .endm
+
+ .macro write_ttbr0 reg
+ mcr p15, 0, \reg, c2, c0, 0
+ .endm
+
+ .macro read_ttbr0 reg
+ mrc p15, 0, \reg, c2, c0, 0
+ .endm
+
+ .macro write_ttbr1 reg
+ mcr p15, 0, \reg, c2, c0, 1
+ .endm
+
+ .macro read_ttbr1 reg
+ mrc p15, 0, \reg, c2, c0, 1
+ .endm
+
+ .macro write_ttbcr reg
+ mcr p15, 0, \reg, c2, c0, 2
+ .endm
+
+ .macro read_ttbcr reg
+ mrc p15, 0, \reg, c2, c0, 2
+ .endm
+
+ .macro write_dacr reg
+ mcr p15, 0, \reg, c3, c0, 0
+ .endm
+
+ .macro read_dacr reg
+ mrc p15, 0, \reg, c3, c0, 0
+ .endm
+
+ .macro read_vbar reg
+ mrc p15, 0, \reg, c12, c0, 0
+ .endm
+
+ .macro write_vbar reg
+ mcr p15, 0, \reg, c12, c0, 0
+ .endm
+
+ .macro write_mvbar reg
+ mcr p15, 0, \reg, c12, c0, 1
+ .endm
+
+ .macro read_mvbar reg
+ mrc p15, 0, \reg, c12, c0, 1
+ .endm
+
+ .macro write_mair0 reg
+ mcr p15, 0, \reg, c10, c2, 0
+ .endm
+
+ .macro read_mair0 reg
+ mrc p15, 0, \reg, c10, c2, 0
+ .endm
+
+ .macro write_mair1 reg
+ mcr p15, 0, \reg, c10, c2, 1
+ .endm
+
+ .macro read_mair1 reg
+ mrc p15, 0, \reg, c10, c2, 1
+ .endm
+
+ .macro read_cpsr reg
+ mrs \reg, cpsr
+ .endm
+
+ .macro write_cpsr reg
+ msr cpsr_fsxc, \reg
+ .endm
+
+ .macro invalidate_tlb reg
+ mov \reg, #0
+ mcr p15, 0, \reg, c8, c5, 0
+ mcr p15, 0, \reg, c8, c6, 0
+ mcr p15, 0, \reg, c8, c7, 0
+ isb
+ dsb
+ .endm
+
+/*
+ *
+ */
+func save_atf_sysreg
+ push {r1, r4,r5}
+
+ mrc p15, 0, r1, c0, c0, 5
+ and r1, r1, #0xff
+ lsl r1, r1, #2
+
+ read_sctlr r4
+ bic r4, r4, #0x5
+ ldr r5, =atf_sctlr
+ add r5, r5, r1
+ str r4, [r5]
+ read_cpsr r4
+ ldr r5, =atf_cpsr
+ add r5, r5, r1
+ str r4, [r5]
+
+ read_scr r4
+ ldr r5, =atf_scr
+ str r4, [r5]
+ read_vbar r4
+ ldr r5, =atf_vbar
+ str r4, [r5]
+ read_mair0 r4
+ ldr r5, =atf_mair0
+ str r4, [r5]
+ read_mair1 r4
+ ldr r5, =atf_mair1
+ str r4, [r5]
+ read_dacr r4
+ ldr r5, =atf_dacr
+ str r4, [r5]
+ read_ttbcr r4
+ ldr r5, =atf_ttbcr
+ str r4, [r5]
+ read_mvbar r4
+ ldr r5, =atf_mvbar
+ str r4, [r5]
+ read_ttbr0 r4
+ ldr r5, =atf_ttbr0
+ str r4, [r5]
+ read_ttbr1 r4
+ ldr r5, =atf_ttbr1
+ str r4, [r5]
+ pop {r1, r4,r5}
+ bx lr
+endfunc save_atf_sysreg
+
+
+/*
+ *
+ */
+func restore_atf_sysreg
+ push {r1,r9,r10}
+
+ mrc p15, 0, r1, c0, c0, 5
+ and r1, r1, #0xff
+ lsl r1, r1, #2
+
+ ldr r9, =atf_sctlr
+ add r9, r9, r1
+ ldr r10, [r9]
+ write_sctlr r10
+ ldr r9, =atf_cpsr
+ add r9, r9, r1
+ ldr r10, [r9]
+ write_cpsr r10
+
+ ldr r9, =atf_scr
+ ldr r10, [r9]
+ write_scr r10
+ ldr r9, =atf_vbar
+ ldr r10, [r9]
+ write_vbar r10
+ ldr r9, =atf_mair0
+ ldr r10, [r9]
+ write_mair0 r10
+ ldr r9, =atf_mair1
+ ldr r10, [r9]
+ write_mair1 r10
+ ldr r9, =atf_dacr
+ ldr r10, [r9]
+ write_dacr r10
+ ldr r9, =atf_ttbcr
+ ldr r10, [r9]
+ write_ttbcr r10
+ ldr r9, =atf_mvbar
+ ldr r10, [r9]
+ write_mvbar r10
+ ldr r9, =atf_ttbr0
+ ldr r10, [r9]
+ write_ttbr0 r10
+ ldr r9, =atf_ttbr1
+ ldr r10, [r9]
+ write_ttbr1 r10
+
+ invalidate_tlb r10
+
+ pop {r1,r9,r10}
+ bx lr
+endfunc restore_atf_sysreg
+
+
+.section .data
+atf_cpsr:
+.word 0x1234
+.word 0x1234
+.word 0x1234
+.word 0x1234
+atf_sctlr:
+.word 0x1234
+.word 0x1234
+.word 0x1234
+.word 0x1234
+
+atf_scr:
+.word 0x1234
+atf_vbar:
+.word 0x1234
+atf_mair0:
+.word 0x1234
+atf_mair1:
+.word 0x1234
+atf_dacr:
+.word 0x1234
+atf_ttbcr:
+.word 0x1234
+atf_mvbar:
+.word 0x1234
+atf_ttbr0:
+.word 0x1234
+atf_ttbr1:
+.word 0x1234
+
+#endif
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/aarch32/pl310_a32.S b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/aarch32/pl310_a32.S
new file mode 100644
index 0000000000..4787490ba2
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/aarch32/pl310_a32.S
@@ -0,0 +1,252 @@
+/* SPDX-License-Identifier: BSD-2-Clause */
+/*
+ * Copyright (c) 2014, STMicroelectronics International N.V.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <asm_macros.S>
+#include <platform_def.h>
+#include <cpu_macros.S>
+
+#define PL310_LOCKDOWN_NBREGS 8
+#define PL310_LOCKDOWN_SZREG 4
+
+#define PL310_8WAYS_MASK 0x00FF
+#define PL310_16WAYS_UPPERMASK 0xFF00
+
+ .globl arm_cl2_lockallways
+ .globl arm_cl2_cleaninvbyway
+ .globl arm_cl2_invbyway
+ .globl arm_cl2_cleanbyway
+ .globl arm_cl2_cleanbypa
+ .globl arm_cl2_invbypa
+ .globl arm_cl2_cleaninvbypa
+/*
+ * void arm_cl2_lockallways(vaddr_t base)
+ *
+ * lock all L2 caches ways for data and instruction
+ */
+func arm_cl2_lockallways
+ add r1, r0, #PL310_DCACHE_LOCKDOWN_BASE
+ ldr r2, [r0, #PL310_AUX_CTRL]
+ tst r2, #PL310_AUX_16WAY_BIT
+ mov r2, #PL310_8WAYS_MASK
+ orrne r2, #PL310_16WAYS_UPPERMASK
+ mov r0, #PL310_LOCKDOWN_NBREGS
+1: /* lock Dcache and Icache */
+ str r2, [r1], #PL310_LOCKDOWN_SZREG
+ str r2, [r1], #PL310_LOCKDOWN_SZREG
+ subs r0, r0, #1
+ bne 1b
+
+ mov pc, lr
+endfunc arm_cl2_lockallways
+
+/*
+ * Set sync operation mask according to ways associativity.
+ * Preserve r0 = pl310 iomem base address
+ */
+.macro syncbyway_set_mask reg
+ ldr \reg, [r0, #PL310_AUX_CTRL]
+ tst \reg, #PL310_AUX_16WAY_BIT
+ mov \reg, #PL310_8WAYS_MASK
+ orrne \reg, \reg, #PL310_16WAYS_UPPERMASK
+.endm
+
+/*
+ * void arm_cl2_cleaninvbyway(vaddr_t base)
+ * clean & invalidate the whole L2 cache.
+ */
+func arm_cl2_cleaninvbyway
+
+ syncbyway_set_mask r1
+ str r1, [r0, #PL310_FLUSH_BY_WAY]
+
+ /* Wait for all cache ways to be cleaned and invalidated */
+loop_cli_way_done:
+ ldr r2, [r0, #PL310_FLUSH_BY_WAY]
+ and r2, r2, r1
+ cmp r2, #0
+ bne loop_cli_way_done
+
+ /* Cache Sync */
+
+ /*
+ * Wait for writing cache sync
+ * To PL310, Cache sync is atomic opertion, no need to check
+ * the status. For PL220, this check is needed. Keeping the loop
+ * for PL310 is no harm for PL310.
+ */
+loop_cli_sync:
+ ldr r1, [r0, #PL310_SYNC]
+ cmp r1, #0
+ bne loop_cli_sync
+
+ mov r1, #0
+ str r1, [r0, #PL310_SYNC]
+
+loop_cli_sync_done:
+ ldr r1, [r0, #PL310_SYNC]
+ cmp r1, #0
+ bne loop_cli_sync_done
+
+ mov pc, lr
+endfunc arm_cl2_cleaninvbyway
+
+/* void arm_cl2_invbyway(vaddr_t base) */
+func arm_cl2_invbyway
+
+ syncbyway_set_mask r1
+ str r1, [r0, #PL310_INV_BY_WAY]
+
+loop_inv_way_done:
+ ldr r2, [r0, #PL310_INV_BY_WAY]
+ and r2, r2, r1
+ cmp r2, #0
+ bne loop_inv_way_done
+
+loop_inv_way_sync:
+ ldr r1, [r0, #PL310_SYNC]
+ cmp r1, #0
+ bne loop_inv_way_sync
+
+ mov r1, #0
+ str r1, [r0, #PL310_SYNC]
+
+loop_inv_way_sync_done:
+ ldr r1, [r0, #PL310_SYNC]
+ cmp r1, #0
+ bne loop_inv_way_sync_done
+
+ mov pc, lr
+endfunc arm_cl2_invbyway
+
+/* void arm_cl2_cleanbyway(vaddr_t base) */
+func arm_cl2_cleanbyway
+
+ syncbyway_set_mask r1
+ str r1, [r0, #PL310_CLEAN_BY_WAY]
+
+loop_cl_way_done:
+ ldr r2, [r0, #PL310_CLEAN_BY_WAY]
+ and r2, r2, r1
+ cmp r2, #0
+ bne loop_cl_way_done
+
+loop_cl_way_sync:
+ ldr r1, [r0, #PL310_SYNC]
+ cmp r1, #0
+ bne loop_cl_way_sync
+
+ mov r1, #0
+ str r1, [r0, #PL310_SYNC]
+
+loop_cl_way_sync_done:
+ ldr r1, [r0, #PL310_SYNC]
+ cmp r1, #0
+ bne loop_cl_way_sync_done
+
+ mov pc, lr
+endfunc arm_cl2_cleanbyway
+
+/*
+ * void _arm_cl2_xxxbypa(vaddr_t pl310_base, paddr_t start, paddr_t end,
+ * int pl310value);
+ * pl310value is one of PL310_CLEAN_BY_PA, PL310_INV_BY_PA or PL310_FLUSH_BY_PA
+ */
+func _arm_cl2_xxxbypa
+ /* Align start address on PL310 line size */
+ and r1, #(~(PL310_LINE_SIZE - 1))
+#ifdef SCU_BASE
+ /*
+ * ARM ERRATA #764369
+ * Undocummented SCU Diagnostic Control Register
+ */
+ /*
+ * NOTE:
+ * We're assuming that if mmu is enabled PL310_BASE and SCU_BASE
+ * still have the same relative offsets from each other.
+ */
+ sub r0, r0, #(PL310_BASE - SCU_BASE)
+ mov r12, #1
+ str r12, [r0, #SCU_ERRATA744369]
+ dsb
+ add r0, r0, #(PL310_BASE - SCU_BASE)
+#endif
+loop_cl2_xxxbypa:
+ str r1, [r0, r3]
+
+loop_xxx_pa_done:
+ ldr r12, [r0, r3]
+ and r12, r12, r1
+ cmp r12, #0
+ bne loop_xxx_pa_done
+
+ add r1, r1, #PL310_LINE_SIZE
+ cmp r2, r1
+ bpl loop_cl2_xxxbypa
+
+loop_xxx_pa_sync:
+ ldr r12, [r0, #PL310_SYNC]
+ cmp r12, #0
+ bne loop_xxx_pa_sync
+
+ mov r12, #0
+ str r12, [r0, #PL310_SYNC]
+
+loop_xxx_pa_sync_done:
+ ldr r12, [r0, #PL310_SYNC]
+ cmp r12, #0
+ bne loop_xxx_pa_sync_done
+
+ mov pc, lr
+endfunc _arm_cl2_xxxbypa
+
+/*
+ * void _arm_cl2_cleanbypa(vaddr_t pl310_base, paddr_t start, paddr_t end);
+ * clean L2 cache by physical address range.
+ */
+func arm_cl2_cleanbypa
+ mov r3, #PL310_CLEAN_BY_PA
+ b _arm_cl2_xxxbypa
+endfunc arm_cl2_cleanbypa
+
+/*
+ * void arm_cl2_invbypa(vaddr_t pl310_base, paddr_t start, paddr_t end);
+ * invalidate L2 cache by physical address range.
+ */
+func arm_cl2_invbypa
+ mov r3, #PL310_INV_BY_PA
+ b _arm_cl2_xxxbypa
+endfunc arm_cl2_invbypa
+
+/*
+ * void arm_cl2_cleaninvbypa(vaddr_t pl310_base, paddr_t start, paddr_t end);
+ * clean and invalidate L2 cache by physical address range.
+ */
+func arm_cl2_cleaninvbypa
+ mov r3, #PL310_FLUSH_BY_PA
+ b _arm_cl2_xxxbypa
+endfunc arm_cl2_cleaninvbypa
+
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/aarch32/plat_helpers.S b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/aarch32/plat_helpers.S
new file mode 100644
index 0000000000..6b7447a551
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/aarch32/plat_helpers.S
@@ -0,0 +1,115 @@
+#include <asm_macros.S>
+#include <platform_def.h>
+#include <cpu_macros.S>
+
+ .globl plat_is_my_cpu_primary
+ .globl plat_secondary_cold_boot_setup
+
+#define NSACR_SMP (1 << 18)
+#define CORTEX_A15_ACTLR_INV_BTB_BIT (U(1) << 0)
+
+func cortex_a9_errata_report
+ bx lr
+endfunc cortex_a9_errata_report
+
+func cortex_a7_errata_report
+ bx lr
+endfunc cortex_a7_errata_report
+
+func cortex_a15_errata_report
+ bx lr
+endfunc cortex_a15_errata_report
+
+func plat_is_my_cpu_primary
+ mov r0, #1
+ isb
+ nop
+ bx lr
+endfunc plat_is_my_cpu_primary
+
+func plat_secondary_cold_boot_setup
+ b .
+ bx lr
+endfunc plat_secondary_cold_boot_setup
+
+func cortex_reset_func
+#define SCTLR_M (1 << 0)
+#define SCTLR_A (1 << 1)
+#define SCTLR_D (1 << 2)
+#define SCTLR_I (1 << 12)
+ mrc p15, 0, r0, c1, c0, 0
+ mov r1, #SCTLR_I
+ orr r1, r1, #SCTLR_A
+ orr r1, r1, #SCTLR_D
+ orr r1, r1, #SCTLR_M
+ bic r0, r0, r1
+ mcr p15, 0, r0, c1, c0, 0
+ isb
+
+ // Invalidate TLB, ICache and Branch predictor
+ mcr p15, 0, r0, c8, c7, 0
+ mcr p15, 0, r0, c7, c5, 0
+ mcr p15, 0, r0, c7, c5, 6
+
+ // set non-secure ACR. Allow SMP, L2ERR, CP10 and CP11 and Enable Neon/VFP bit for non-secure mode
+ movw r0, #0x0c00
+ movt r0, #0x0006
+ mcr p15, 0, r0, c1, c1, 2
+ // Allow non-secure access to ACR
+ ldr r1,=NSACR_SMP
+#if defined(PLATFORM_FLAVOR_63138)
+ // Cortex A9 specific quirks
+#define PLEAUR_EN (1 << 0)
+#define NSACR_PLE (1 << 16)
+ mov r2, #PLEAUR_EN
+ mcr p15, 0, r2, c11, c1, 0
+ orr r1, r1, #NSACR_PLE
+#endif
+ ldcopr r0, NSACR
+ orr r0, r0, r1
+ stcopr r0, NSACR
+
+ mrc p15, 0, r1, c1, c0, 1
+#if defined(PLATFORM_FLAVOR_63138)
+ /* Enable SMP and FW */
+ orr r1, r1, #0x41
+#else
+ /* Enable SMP */
+ orr r1, r1, #0x40
+#endif
+ mcr p15, 0, r1, c1, c0, 1
+ isb
+#if defined(PLATFORM_FLAVOR_63148)
+ ldcopr r1, ACTLR
+ orr r1, #CORTEX_A15_ACTLR_INV_BTB_BIT
+ stcopr r1, ACTLR
+#endif
+ bx lr
+endfunc cortex_reset_func
+
+
+func cortex_core_pwr_dwn
+ bx lr
+endfunc cortex_core_pwr_dwn
+
+func cortex_cluster_pwr_dwn
+ bx lr
+endfunc cortex_cluster_pwr_dwn
+
+#if defined(PLATFORM_FLAVOR_63138)
+declare_cpu_ops cortex_a9, 0x4100C090, \
+ cortex_reset_func, \
+ cortex_core_pwr_dwn, \
+ cortex_cluster_pwr_dwn
+#elif defined(PLATFORM_FLAVOR_63148)
+declare_cpu_ops cortex_a15, 0x420000F0, \
+ cortex_reset_func, \
+ cortex_core_pwr_dwn, \
+ cortex_cluster_pwr_dwn
+#else
+declare_cpu_ops cortex_a7, 0x4100C070, \
+ cortex_reset_func, \
+ cortex_core_pwr_dwn, \
+ cortex_cluster_pwr_dwn
+#endif
+
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/aarch64/plat_helpers.S b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/aarch64/plat_helpers.S
new file mode 100644
index 0000000000..3614559c4e
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/aarch64/plat_helpers.S
@@ -0,0 +1,117 @@
+/*
+ * Copyright (c) 2015-2016, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <assert_macros.S>
+#include <platform_def.h>
+
+ .globl plat_my_core_pos
+ .globl plat_get_my_entrypoint
+ .globl platform_mem_init
+ .globl plat_bcm_calc_core_pos
+ .globl plat_crash_console_init
+ .globl plat_crash_console_putc
+ .globl plat_secondary_cold_boot_setup
+ .globl plat_get_my_entrypoint
+ .globl plat_is_my_cpu_primary
+ .globl plat_crash_console_flush
+
+
+func console_core_init
+ ret
+endfunc console_core_init
+
+func console_core_putc
+ ret
+endfunc console_core_putc
+
+func plat_crash_console_flush
+ ret
+endfunc plat_crash_console_flush
+
+
+func plat_my_core_pos
+ mrs x0, mpidr_el1
+ b plat_bcm_calc_core_pos
+endfunc plat_my_core_pos
+
+/*
+ * unsigned int plat_bcm_calc_core_pos(u_register_t mpidr);
+ * With this function: CorePos = (ClusterId * 4) + CoreId
+ */
+func plat_bcm_calc_core_pos
+ and x1, x0, #MPIDR_CPU_MASK
+ and x0, x0, #MPIDR_CLUSTER_MASK
+ add x0, x1, x0, LSR #6
+ ret
+endfunc plat_bcm_calc_core_pos
+
+ /* -----------------------------------------------------
+ * unsigned int plat_is_my_cpu_primary (void);
+ *
+ * Find out whether the current cpu is the primary
+ * cpu.
+ * -----------------------------------------------------
+ */
+func plat_is_my_cpu_primary
+ mrs x0, mpidr_el1
+ and x0, x0, #(MPIDR_CLUSTER_MASK | MPIDR_CPU_MASK)
+ cmp x0, #BRCM_PRIMARY_CPU
+ cset w0, eq
+ ret
+endfunc plat_is_my_cpu_primary
+
+ /* -----------------------------------------------------
+ * void plat_secondary_cold_boot_setup (void);
+ *
+ * This function performs any platform specific actions
+ * needed for a secondary cpu after a cold reset e.g
+ * mark the cpu's presence, mechanism to place it in a
+ * holding pen etc.
+ * -----------------------------------------------------
+ */
+func plat_secondary_cold_boot_setup
+ ret
+endfunc plat_secondary_cold_boot_setup
+
+func plat_get_my_entrypoint
+ /* TODO support warm boot */
+ mov x0, #0
+ ret
+endfunc plat_get_my_entrypoint
+
+func platform_mem_init
+ ret
+endfunc platform_mem_init
+
+ /* ---------------------------------------------
+ * int plat_crash_console_init(void)
+ * Function to initialize the crash console
+ * without a C Runtime to print crash report.
+ * Clobber list : x0, x1, x2
+ * ---------------------------------------------
+ */
+func plat_crash_console_init
+ mov_imm x0, PLAT_BCM_CRASH_UART_BASE
+ mov_imm x1, PLAT_BCM_CRASH_UART_CLK_IN_HZ
+ mov_imm x2, PLAT_BCM_CONSOLE_BAUDRATE
+ b console_core_init
+endfunc plat_crash_console_init
+
+ /* ---------------------------------------------
+ * int plat_crash_console_putc(int c)
+ * Function to print a character on the crash
+ * console without a C Runtime.
+ * Clobber list : x1, x2
+ * ---------------------------------------------
+ */
+func plat_crash_console_putc
+ mov_imm x1, PLAT_BCM_CRASH_UART_BASE
+ b console_core_putc
+endfunc plat_crash_console_putc
+
+
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/bcm_gic.c b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/bcm_gic.c
new file mode 100644
index 0000000000..57edbc217d
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/bcm_gic.c
@@ -0,0 +1,85 @@
+/*
+<:copyright-BRCM:2012:DUAL/GPL:standard
+
+ Copyright (c) 2012 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+*/
+
+#include <assert.h>
+#include <bl_common.h>
+#include <gicv2.h>
+#include <interrupt_mgmt.h>
+
+uint32_t plat_ic_get_pending_interrupt_id(void)
+{
+ return gicv2_get_pending_interrupt_id();
+}
+
+uint32_t plat_ic_get_pending_interrupt_type(void)
+{
+ return gicv2_get_pending_interrupt_type();
+}
+
+uint32_t plat_ic_acknowledge_interrupt(void)
+{
+ return gicv2_acknowledge_interrupt();
+}
+
+uint32_t plat_ic_get_interrupt_type(uint32_t id)
+{
+ uint32_t group;
+
+ group = gicv2_get_interrupt_group(id);
+
+ /* Assume that all secure interrupts are S-EL1 interrupts */
+ if (!group)
+ return INTR_TYPE_S_EL1;
+ else
+ return INTR_TYPE_NS;
+
+}
+
+void plat_ic_end_of_interrupt(uint32_t id)
+{
+ gicv2_end_of_interrupt(id);
+}
+
+uint32_t plat_interrupt_type_to_line(uint32_t type,
+ uint32_t security_state)
+{
+ assert(type == INTR_TYPE_S_EL1 ||
+ type == INTR_TYPE_EL3 ||
+ type == INTR_TYPE_NS);
+
+ assert(sec_state_is_valid(security_state));
+
+ /* Non-secure interrupts are signalled on the IRQ line always */
+ if (type == INTR_TYPE_NS)
+ return __builtin_ctz(SCR_IRQ_BIT);
+
+ /*
+ * Secure interrupts are signalled using the IRQ line if the FIQ_EN
+ * bit is not set else they are signalled using the FIQ line.
+ */
+ if (gicv2_is_fiq_enabled())
+ return __builtin_ctz(SCR_FIQ_BIT);
+ else
+ return __builtin_ctz(SCR_IRQ_BIT);
+}
+
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/bcm_private.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/bcm_private.h
new file mode 100644
index 0000000000..d32e9820a9
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/bcm_private.h
@@ -0,0 +1,37 @@
+/*
+<:copyright-BRCM:2012:DUAL/GPL:standard
+
+ Copyright (c) 2012 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+*/
+
+#ifndef __BCM_PRIVATE_H
+#define __BCM_PRIVATE_H
+
+void bcm_configure_mmu_el3(unsigned long total_base, unsigned long total_size,
+ unsigned long ro_start, unsigned long ro_limit,
+ unsigned long coh_start, unsigned long coh_limit);
+
+void plat_bcm_io_setup(void);
+unsigned int plat_bcm_calc_core_pos(u_register_t mpidr);
+
+int dt_add_psci_node(void *fdt);
+int dt_add_psci_cpu_enable_methods(void *fdt);
+
+#endif /*__BCM_PRIVATE_H*/
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/brcm_bl31_setup.c b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/brcm_bl31_setup.c
new file mode 100644
index 0000000000..9cb44d13bc
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/brcm_bl31_setup.c
@@ -0,0 +1,286 @@
+/*
+ * Copyright (c) 2015-2016, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <assert.h>
+#include <bl_common.h>
+#include <console.h>
+#include <debug.h>
+#include <mmio.h>
+#include <plat_arm.h>
+#include <platform.h>
+#include <gicv2.h>
+#include <string.h>
+#include <generic_delay_timer.h>
+#include <delay_timer.h>
+
+#define BL31_END (uintptr_t)(&__BL31_END__)
+
+#define MAP_BL31_TOTAL MAP_REGION_FLAT( \
+ BL31_BASE, \
+ BL31_END - BL31_BASE, \
+ MT_MEMORY | MT_RW | MT_SECURE)
+
+#define ARM_MAP_BL_RO MAP_REGION_FLAT( \
+ BL_CODE_BASE, \
+ BL_CODE_END - BL_CODE_BASE, \
+ MT_CODE | MT_SECURE)
+
+#define ARM_MAP_BL_COHERENT_RAM MAP_REGION_FLAT( \
+ BL_COHERENT_RAM_BASE, \
+ BL_COHERENT_RAM_END \
+ - BL_COHERENT_RAM_BASE, \
+ MT_DEVICE | MT_RW | MT_SECURE)
+
+/*
+ * Placeholder variables for copying the arguments that have been passed to
+ * BL31 from BL2.
+ */
+static entry_point_info_t bl32_image_ep_info;
+static entry_point_info_t bl33_image_ep_info;
+
+static uintptr_t ns_entry_point;
+
+#define DEVICE_BASE 0x80000000
+#define DEVICE_SIZE 0x00010000
+
+const mmap_region_t plat_arm_mmap[] = {
+ MAP_REGION_FLAT(DEVICE_BASE, DEVICE_SIZE, MT_DEVICE | MT_RW | MT_SECURE),
+ MAP_REGION_FLAT(GICD_BASE, DEVICE_SIZE, MT_DEVICE | MT_RW | MT_SECURE),
+ MAP_REGION_FLAT(UART0_BASE, UART0_SIZE, MT_DEVICE | MT_RW | MT_SECURE),
+#if defined(BIUCFG_BASE)
+ MAP_REGION_FLAT(BIUCFG_BASE, BIUCFG_SIZE, MT_DEVICE | MT_RW | MT_SECURE),
+#elif defined(BIUCTRL_BASE)
+ MAP_REGION_FLAT(BIUCTRL_BASE, BIUCTRL_SIZE, MT_DEVICE | MT_RW | MT_SECURE),
+#endif
+ MAP_REGION_FLAT(BOOTLUT_BASE, BOOTLUT_SIZE, MT_DEVICE | MT_RW | MT_SECURE),
+#if defined(WDTIMR0_BASE)
+ MAP_REGION_FLAT(WDTIMR_BASE, WDTIMR_SIZE, MT_DEVICE | MT_RW | MT_SECURE),
+#endif
+ MAP_REGION_FLAT(PMC_BASE, PMC_SIZE, MT_DEVICE | MT_RW | MT_SECURE),
+ {0}
+};
+
+
+/*******************************************************************************
+ * Return a pointer to the 'entry_point_info' structure of the next image for the
+ * security state specified. BL33 corresponds to the non-secure image type
+ * while BL32 corresponds to the secure image type. A NULL pointer is returned
+ * if the image does not exist.
+ ******************************************************************************/
+entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type)
+{
+ entry_point_info_t *next_image_info;
+
+ assert(sec_state_is_valid(type));
+ next_image_info = (type == NON_SECURE)
+ ? &bl33_image_ep_info : &bl32_image_ep_info;
+ /*
+ * None of the images on the ARM development platforms can have 0x0
+ * as the entrypoint
+ */
+ if (next_image_info->pc)
+ return next_image_info;
+ else
+ return NULL;
+}
+
+/*******************************************************************************
+ * Obtain ns entry point
+ ******************************************************************************/
+uintptr_t plat_get_ns_image_entrypoint(void)
+{
+ return ns_entry_point;
+}
+
+/*******************************************************************************
+ * Set ns-entry point
+ ******************************************************************************/
+void plat_set_ns_image_entrypoint(uintptr_t entry_point)
+{
+ ns_entry_point = entry_point;
+}
+
+
+struct atf_image_info {
+ struct param_header h;
+ uintptr_t image_base; /* physical address of base of image */
+ uint32_t image_size; /* bytes read from image file */
+};
+
+struct atf_entry_point_info {
+ struct param_header h;
+ uintptr_t pc;
+ uint32_t spsr;
+ struct aapcs64_params args;
+};
+
+typedef struct bl31_params {
+ param_header_t h;
+ struct atf_image_info *bl31_image_info;
+ struct atf_entry_point_info *bl32_ep_info;
+ struct atf_image_info *bl32_image_info;
+ struct atf_entry_point_info *bl33_ep_info;
+ struct atf_image_info *bl33_image_info;
+} bl31_params_t;
+
+/*******************************************************************************
+ * Perform any BL31 early platform setup common to ARM standard platforms.
+ * Here is an opportunity to copy parameters passed by the calling EL (S-EL1
+ * in BL2 & S-EL3 in BL1) before they are lost (potentially). This needs to be
+ * done before the MMU is initialized so that the memory layout can be used
+ * while creating page tables. BL2 has flushed this information to memory, so
+ * we are guaranteed to pick up good data.
+ ******************************************************************************/
+void arm_bl31_early_platform_setup(void *param0, uintptr_t plat_params_from_bl2, uintptr_t arg2, void * arg43)
+{
+ bl31_params_t *from_bl2 = (bl31_params_t *)param0;
+
+#ifdef BL32_BASE
+ /* Populate entry point information for BL32 */
+ SET_PARAM_HEAD(&bl32_image_ep_info,
+ PARAM_EP,
+ VERSION_1,
+ 0);
+ SET_SECURITY_STATE(bl32_image_ep_info.h.attr, SECURE);
+ bl32_image_ep_info.pc = BL32_BASE;
+ bl32_image_ep_info.spsr = arm_get_spsr_for_bl32_entry();
+ /* Provide boot parameters to OPTEE */
+ memset(&bl32_image_ep_info.args, 0, sizeof(aapcs64_params_t));
+ bl32_image_ep_info.args.arg0 = MODE_RW_64;
+ bl32_image_ep_info.args.arg2 = (u_register_t)plat_params_from_bl2;
+#endif /* BL32_BASE */
+
+ /* Populate entry point information for BL33 */
+ SET_PARAM_HEAD(&bl33_image_ep_info,
+ PARAM_EP,
+ VERSION_1,
+ 0);
+
+ /* Configure ns entry point */
+ plat_set_ns_image_entrypoint(from_bl2->bl33_ep_info->pc);
+
+ /*
+ * Tell BL31 where the non-trusted software image
+ * is located and the entry state information
+ */
+ bl33_image_ep_info.pc = plat_get_ns_image_entrypoint();
+
+ bl33_image_ep_info.spsr = arm_get_spsr_for_bl33_entry();
+ SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE);
+
+ /*
+ * Provide Linux DTB address
+ */
+ bl33_image_ep_info.args.arg0 = (u_register_t)from_bl2;
+ bl33_image_ep_info.args.arg1 = (u_register_t)plat_get_ns_image_entrypoint();
+}
+
+void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1, u_register_t arg2,
+ u_register_t arg3)
+{
+ arm_bl31_early_platform_setup((void*)arg0, (uintptr_t)arg1, arg2, (void*)arg3);
+}
+
+#define PLATFORM_G1S_PROPS(grp) \
+ INTR_PROP_DESC(BRCM_IRQ_SEC_SGI_0, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_LEVEL), \
+ INTR_PROP_DESC(BRCM_IRQ_SEC_SGI_1, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_LEVEL), \
+ INTR_PROP_DESC(BRCM_IRQ_SEC_SGI_2, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_LEVEL), \
+ INTR_PROP_DESC(BRCM_IRQ_SEC_SGI_3, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_LEVEL), \
+ INTR_PROP_DESC(BRCM_IRQ_SEC_SGI_4, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_LEVEL), \
+ INTR_PROP_DESC(BRCM_IRQ_SEC_SGI_5, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_LEVEL), \
+ INTR_PROP_DESC(BRCM_IRQ_SEC_SGI_6, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_LEVEL), \
+ INTR_PROP_DESC(BRCM_IRQ_SEC_SGI_7, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_LEVEL)
+
+
+static const interrupt_prop_t irq_sec_array[] = {
+ PLATFORM_G1S_PROPS(GICV2_INTR_GROUP0)
+};
+
+static unsigned int target_mask_array[PLATFORM_CORE_COUNT];
+
+static const struct gicv2_driver_data plat_gicv2_driver_data = {
+ .gicd_base = GICD_BASE,
+ .gicc_base = GICC_BASE,
+ .interrupt_props = irq_sec_array,
+ .interrupt_props_num = ARRAY_SIZE(irq_sec_array),
+ .target_masks = target_mask_array,
+ .target_masks_num = ARRAY_SIZE(target_mask_array),
+};
+
+/*******************************************************************************
+ * Perform any BL31 platform setup common to ARM standard platforms
+ ******************************************************************************/
+void arm_bl31_platform_setup(void)
+{
+ /* Initialize the gic cpu and distributor interfaces */
+ gicv2_driver_init(&plat_gicv2_driver_data);
+ gicv2_distif_init();
+ gicv2_pcpu_distif_init();
+ gicv2_cpuif_enable();
+}
+
+/*******************************************************************************
+ * Perform any BL31 platform runtime setup prior to BL31 exit common to ARM
+ * standard platforms
+ ******************************************************************************/
+void arm_bl31_plat_runtime_setup(void)
+{
+ /* Initialize the runtime functions */
+}
+
+void bl31_platform_setup(void)
+{
+ arm_bl31_platform_setup();
+}
+
+void bl31_plat_runtime_setup(void)
+{
+ arm_bl31_plat_runtime_setup();
+}
+
+/*******************************************************************************
+ * Perform the very early platform specific architectural setup shared between
+ * ARM standard platforms. This only does basic initialization. Later
+ * architectural setup (bl31_arch_setup()) does not do anything platform
+ * specific.
+ ******************************************************************************/
+void arm_bl31_plat_arch_setup(void)
+{
+ const mmap_region_t bl_regions[] = {
+ MAP_BL31_TOTAL,
+ ARM_MAP_BL_RO,
+#if USE_COHERENT_MEM
+ ARM_MAP_BL_COHERENT_RAM,
+#endif
+ {0}
+ };
+
+ setup_page_tables(bl_regions, plat_arm_get_mmap());
+
+ generic_delay_timer_init();
+
+ enable_mmu_el3(0);
+}
+
+void bl31_plat_arch_setup(void)
+{
+ arm_bl31_plat_arch_setup();
+}
+
+unsigned int plat_get_syscnt_freq2(void)
+{
+ return SYS_COUNTER_FREQ_IN_TICKS;
+}
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/brcm_bl32_setup.c b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/brcm_bl32_setup.c
new file mode 100644
index 0000000000..c86fe1b60c
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/brcm_bl32_setup.c
@@ -0,0 +1,485 @@
+/*
+<:copyright-BRCM:2019:DUAL/GPL:standard
+
+ Copyright (c) 2019 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+*/
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <assert.h>
+#include <bl_common.h>
+#include <console.h>
+#include <debug.h>
+#include <mmio.h>
+#include <plat_arm.h>
+#include <platform.h>
+#include <gicv2.h>
+#include <string.h>
+#include <generic_delay_timer.h>
+#include <delay_timer.h>
+
+#define MAP_BL_SP_MIN_TOTAL MAP_REGION_FLAT( \
+ BL32_BASE, \
+ BL32_END - BL32_BASE, \
+ MT_MEMORY | MT_RW | MT_SECURE)
+
+#define ARM_MAP_BL_RO MAP_REGION_FLAT( \
+ BL_CODE_BASE, \
+ BL_CODE_END - BL_CODE_BASE, \
+ MT_CODE | MT_SECURE)
+
+#define ARM_MAP_BL_COHERENT_RAM MAP_REGION_FLAT( \
+ BL_COHERENT_RAM_BASE, \
+ BL_COHERENT_RAM_END \
+ - BL_COHERENT_RAM_BASE, \
+ MT_DEVICE | MT_RW | MT_SECURE)
+
+struct atf_image_info {
+ struct param_header h;
+ uintptr_t image_base; /* physical address of base of image */
+ uint32_t image_size; /* bytes read from image file */
+};
+
+struct atf_entry_point_info {
+ struct param_header h;
+ uintptr_t pc;
+ uint32_t spsr;
+ struct aapcs64_params args;
+};
+
+typedef struct bl31_params {
+ param_header_t h;
+ struct atf_image_info *bl31_image_info;
+ struct atf_entry_point_info *bl32_ep_info;
+ struct atf_image_info *bl32_image_info;
+ struct atf_entry_point_info *bl33_ep_info;
+ struct atf_image_info *bl33_image_info;
+} bl31_params_t;
+
+
+#define BL32_END (uintptr_t)(&__BL32_END__)
+#define DEVICE_BASE 0x80000000
+#define DEVICE_SIZE 0x00010000
+
+
+#define DESC_DOMAIN(x) ((x << 5) & 0x000001E0)
+// section descriptor definitions
+#define SECTION_AP 0xc00
+#define SECTION_XN 0x10
+#define SECTION_PXN 0x1
+/* A9 does not support PXN */
+#define SECTION_XN_ALL (SECTION_XN)
+#define SECTION_SHAREABLE (1 << 16)
+#define SECTION_SUPER_DESC (1 << 18)
+#define SECTION_DESC_NS (1 << 19)
+// TEX[2] = 1
+#define SECTION_OUTER_NC_INNER_WBWA 0x00004006
+#define SECTION_OUTER_WBNWA_INNER_WBWA 0x00007006
+#define SECTION_OUTER_WTNWA_INNER_WBWA 0x00006006
+#define SECTION_OUTER_WBWA_INNER_NC 0x00005002
+// TEX[2] = 0, OUTER & INNER are same all the time
+#define SECTION_OUTER_WBWA_INNER_WBWA 0x0000100E
+#define SECTION_OUTER_NSD_INNER_NSD 0x00002002
+#define SECTION_OUTER_NC_INNER_NC 0x00001002
+#define SECTION_OUTER_WTNWA_INNER_WTNWA 0x0000000A
+#define SECTION_OUTER_WBNWA_INNER_WBNWA 0x0000000E
+#define SECTION_OUTER_SO_INNER_SO 0x00000002
+#define SECTION_OUTER_SD_INNER_SD 0x00000006
+
+// definition for common section attribute
+#define SECTION_ATTR_INVALID 0x0
+#define SECTION_ATTR_CACHED_MEM \
+ (SECTION_OUTER_WBWA_INNER_WBWA|SECTION_AP|DESC_DOMAIN(0)|SECTION_SHAREABLE)
+#define SECTION_ATTR_NONCACHED_MEM \
+ (SECTION_OUTER_NC_INNER_NC|SECTION_AP|DESC_DOMAIN(0))
+#define SECTION_ATTR_DEVICE \
+ (SECTION_OUTER_NSD_INNER_NSD|SECTION_AP|SECTION_XN_ALL|DESC_DOMAIN(0))
+#define SECTION_ATTR_DEVICE_EXEC \
+ (SECTION_OUTER_NSD_INNER_NSD|SECTION_AP|DESC_DOMAIN(0))
+
+#define SCU_INV_CTRL_INIT 0xFFFF
+#define SCU_SAC_CTRL_INIT 0xF
+#define SCU_NSAC_CTRL_INIT 0xFFF
+#define SCU_INV_SEC 0x0C
+#define SCU_SAC 0x50
+#define SCU_NSAC 0x54
+#define SCU_CTRL 0x0
+
+extern void a9_mmu_invalidate_tlb(void);
+extern void a9_mmu_enable(void);
+extern void a9_l1cache_enable_i(void);
+extern void a9_l1cache_enable_d(void);
+extern void a9_mmu_set_ttbr(char* table_base);
+extern void a9_gic_secure_init(void);
+extern void arm_cl2_invbyway(uint32_t);
+/*
+ * Placeholder variables for copying the arguments that have been passed to
+ * BL31 from BL2.
+ */
+static entry_point_info_t bl32_image_ep_info;
+static entry_point_info_t bl33_image_ep_info;
+static uintptr_t ns_entry_point;
+
+#if defined (PLATFORM_FLAVOR_63138)
+char mmu_table[1024*16] __attribute__((aligned(4096*4)));
+#endif
+
+const mmap_region_t plat_arm_mmap[] = {
+ MAP_REGION_FLAT(DEVICE_BASE, DEVICE_SIZE, MT_DEVICE | MT_RW | MT_SECURE),
+ MAP_REGION_FLAT(GICD_BASE, DEVICE_SIZE, MT_DEVICE | MT_RW | MT_SECURE),
+#if UART0_BASE
+ MAP_REGION_FLAT(UART0_BASE, UART0_SIZE, MT_DEVICE | MT_RW | MT_SECURE),
+#endif
+#if defined(BIUCFG_BASE)
+ MAP_REGION_FLAT(BIUCFG_BASE, BIUCFG_SIZE, MT_DEVICE | MT_RW | MT_SECURE),
+#elif defined(BIUCTRL_BASE)
+ MAP_REGION_FLAT(BIUCTRL_BASE, BIUCTRL_SIZE, MT_DEVICE | MT_RW | MT_SECURE),
+#endif
+#if defined(BOOTLUT_BASE)
+ MAP_REGION_FLAT(BOOTLUT_BASE, BOOTLUT_SIZE, MT_DEVICE | MT_RW | MT_SECURE),
+#endif
+#if defined(PL310_BASE)
+ MAP_REGION_FLAT(PL310_BASE, PL310_MAP_SIZE, MT_DEVICE | MT_RW | MT_SECURE),
+#endif
+#if defined(B15_CTRL_BASE)
+ MAP_REGION_FLAT(B15_CTRL_BASE, B15_CTRL_SIZE, MT_DEVICE | MT_RW | MT_SECURE),
+#endif
+#if defined(TIMR_BASE)
+ MAP_REGION_FLAT(TIMR_BASE, TIMR_SIZE, MT_DEVICE | MT_RW | MT_SECURE),
+#endif
+ MAP_REGION_FLAT(PMC_BASE, PMC_SIZE, MT_DEVICE | MT_RW | MT_SECURE),
+ {0}
+};
+
+
+#if defined(PL310_BASE)
+void a9_cl2_config(void)
+{
+ /* Disable PL310 */
+ uint32_t pl310_base = PL310_BASE;
+ mmio_write_32(pl310_base + PL310_CTRL, 0);
+ mmio_write_32(pl310_base + PL310_DATA_RAM_CTRL, PL310_DATA_RAM_CTRL_INIT);
+ mmio_write_32(pl310_base + PL310_AUX_CTRL, PL310_AUX_CTRL_INIT);
+
+ /* invalidate all cache ways */
+ arm_cl2_invbyway(pl310_base);
+}
+#endif
+
+
+/*******************************************************************************
+ * Return a pointer to the 'entry_point_info' structure of the next image for the
+ * security state specified. BL33 corresponds to the non-secure image type
+ * while BL32 corresponds to the secure image type. A NULL pointer is returned
+ * if the image does not exist.
+ ******************************************************************************/
+entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type)
+{
+ entry_point_info_t *next_image_info;
+
+ assert(sec_state_is_valid(type));
+ next_image_info = (type == NON_SECURE)
+ ? &bl33_image_ep_info : &bl32_image_ep_info;
+ /*
+ * None of the images on the ARM development platforms can have 0x0
+ * as the entrypoint
+ */
+ if (next_image_info->pc)
+ return next_image_info;
+ else
+ return NULL;
+}
+
+/*******************************************************************************
+ * Obtain ns entry point
+ ******************************************************************************/
+uintptr_t plat_get_ns_image_entrypoint(void)
+{
+ return ns_entry_point;
+}
+
+/*******************************************************************************
+ * Set ns-entry point
+ ******************************************************************************/
+void plat_set_ns_image_entrypoint(uintptr_t entry_point)
+{
+ ns_entry_point = entry_point;
+}
+
+/*******************************************************************************
+ * Return a pointer to the 'entry_point_info' structure of the next image for the
+ * security state specified. BL33 corresponds to the non-secure image type
+ * while BL32 corresponds to the secure image type. A NULL pointer is returned
+ * if the image does not exist.
+ ******************************************************************************/
+entry_point_info_t *sp_min_plat_get_bl33_ep_info(void)
+{
+ entry_point_info_t *next_image_info;
+
+ next_image_info = &bl33_image_ep_info;
+
+ /*
+ * None of the images on the ARM development platforms can have 0x0
+ * as the entrypoint
+ */
+ if (next_image_info->pc)
+ return next_image_info;
+ else
+ return NULL;
+}
+
+
+void arm_sp_min_early_platform_setup ( void *plat_params, uintptr_t tos_fw_config,
+ uintptr_t hw_config, void *plat_params_from_bl2 )
+{
+ bl31_params_t *from_bl2 = (bl31_params_t*)plat_params;
+
+ if (plat_my_core_pos() != 0){
+ plat_panic_handler();
+ }
+
+#if defined(SCU_BASE)
+ mmio_write_32(SCU_BASE + SCU_INV_SEC, SCU_INV_CTRL_INIT);
+ mmio_write_32(SCU_BASE + SCU_SAC, SCU_SAC_CTRL_INIT);
+ mmio_write_32(SCU_BASE + SCU_NSAC, SCU_NSAC_CTRL_INIT);
+ /* SCU enable */
+ mmio_write_32(SCU_BASE + SCU_CTRL, 0x1);
+#endif
+
+#if defined(PL310_BASE)
+ a9_cl2_config();
+#endif
+
+ /* Populate entry point information for BL32 */
+ SET_PARAM_HEAD(&bl32_image_ep_info,
+ PARAM_EP,
+ VERSION_1,
+ 0);
+ SET_SECURITY_STATE(bl32_image_ep_info.h.attr, SECURE);
+ bl32_image_ep_info.pc = BL322_BASE;
+ bl32_image_ep_info.spsr = MODE32_svc << MODE32_SHIFT;
+ /* Provide boot parameters to OPTEE */
+ memset(&bl32_image_ep_info.args, 0, sizeof(aapcs32_params_t));
+ bl32_image_ep_info.args.arg0 = (u_register_t)plat_params_from_bl2;
+
+ /* Populate entry point information for BL33 */
+ SET_PARAM_HEAD(&bl33_image_ep_info,
+ PARAM_EP,
+ VERSION_1,
+ 0);
+
+ /* Configure ns entry point */
+ plat_set_ns_image_entrypoint(from_bl2->bl33_ep_info->pc);
+
+ /*
+ * Tell SP_MIN where the non-trusted software image
+ * is located and the entry state information
+ */
+ bl33_image_ep_info.pc = plat_get_ns_image_entrypoint();
+ bl33_image_ep_info.spsr = arm_get_spsr_for_bl33_entry() & ~(MODE32_MASK << MODE32_SHIFT);
+ /* Always enter in non-secure SVC mode */
+ bl33_image_ep_info.spsr |= MODE32_svc << MODE32_SHIFT;
+ SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE);
+}
+
+void sp_min_early_platform_setup(void *from_bl2,
+ void *plat_params_from_bl2)
+{
+ arm_sp_min_early_platform_setup(from_bl2, 0, 0, plat_params_from_bl2);
+}
+
+
+void sp_min_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+ u_register_t arg2, u_register_t arg3)
+{
+ sp_min_early_platform_setup((void *)arg0, (void *)arg1);
+}
+
+#define PLATFORM_G1S_PROPS(grp) \
+ INTR_PROP_DESC(BRCM_IRQ_SEC_SGI_0, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_LEVEL), \
+ INTR_PROP_DESC(BRCM_IRQ_SEC_SGI_1, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_LEVEL), \
+ INTR_PROP_DESC(BRCM_IRQ_SEC_SGI_2, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_LEVEL), \
+ INTR_PROP_DESC(BRCM_IRQ_SEC_SGI_3, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_LEVEL), \
+ INTR_PROP_DESC(BRCM_IRQ_SEC_SGI_4, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_LEVEL), \
+ INTR_PROP_DESC(BRCM_IRQ_SEC_SGI_5, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_LEVEL), \
+ INTR_PROP_DESC(BRCM_IRQ_SEC_SGI_6, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_LEVEL), \
+ INTR_PROP_DESC(BRCM_IRQ_SEC_SGI_7, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_LEVEL)
+
+static const interrupt_prop_t irq_sec_array[] = {
+ PLATFORM_G1S_PROPS(GICV2_INTR_GROUP0)
+};
+
+static unsigned int target_mask_array[PLATFORM_CORE_COUNT];
+
+const struct gicv2_driver_data plat_gicv2_driver_data = {
+ .gicd_base = GICD_BASE,
+ .gicc_base = GICC_BASE,
+ .interrupt_props = irq_sec_array,
+ .interrupt_props_num = ARRAY_SIZE(irq_sec_array),
+ .target_masks = target_mask_array,
+ .target_masks_num = ARRAY_SIZE(target_mask_array),
+};
+
+/*******************************************************************************
+ * Perform any BL32 platform setup common to ARM standard platforms
+ ******************************************************************************/
+void arm_bl32_platform_setup(void)
+{
+#if defined (PLATFORM_FLAVOR_63138)
+ a9_gic_secure_init();
+#else
+ /* Initialize the gic cpu and distributor interfaces */
+ gicv2_driver_init(&plat_gicv2_driver_data);
+ gicv2_distif_init();
+ gicv2_pcpu_distif_init();
+ gicv2_cpuif_enable();
+#endif
+}
+
+/*******************************************************************************
+ * Perform any BL32 platform runtime setup prior to ARM standard platforms
+ ******************************************************************************/
+void arm_bl32_plat_runtime_setup(void)
+{
+ /* Initialize the runtime functions */
+}
+
+void sp_min_platform_setup(void)
+{
+ arm_bl32_platform_setup();
+}
+
+void sp_min_runtime_setup(void)
+{
+ arm_bl32_plat_runtime_setup();
+}
+
+#if defined (PLATFORM_FLAVOR_63138)
+void a9_mmu_setup_region(uint32_t mem_addr, uint32_t mem_size, uint32_t mem_attr)
+{
+#define size_mb(s) ((s + 0xFFFFF) / 0x100000)
+ register uint32_t table_base = (uint32_t)mmu_table;
+ register uint32_t table_size = sizeof(mmu_table);
+
+ /* Align the address to MB and then adjust the size */
+ mem_size += mem_addr & 0xFFFFF;
+ mem_addr &= ~0xFFFFF;
+ /* Convert the mem size in MB */
+ mem_size = size_mb(mem_size);
+
+ __asm__ volatile ("mov r0, %0" : : "r" (table_size) : "r0");
+ __asm__ volatile ("push {r0}");
+ __asm__ volatile ("mov r0, %0" : : "r" (mem_addr) : "r0");
+ __asm__ volatile ("push {r0}");
+ __asm__ volatile ("mov r0, %0" : : "r" (mem_attr) : "r0");
+ __asm__ volatile ("push {r0}");
+ __asm__ volatile ("mov r0, %0" : : "r" (mem_size) : "r0");
+ __asm__ volatile ("push {r0}");
+ __asm__ volatile ("mov r0, %0" : : "r" (mem_addr) : "r0");
+ __asm__ volatile ("push {r0}");
+ __asm__ volatile ("mov r0, %0" : : "r" (table_base) : "r0");
+ __asm__ volatile ("push {r0}");
+ __asm__ volatile ("pop {r0-r4,r6}");
+
+ __asm__ volatile ("bl a9_mmu_set_scn" ::: "lr");
+}
+
+void a9_bl32_plat_map_mmu(void)
+{
+ int i = 0;
+ int region_cnt = sizeof(plat_arm_mmap) / sizeof(mmap_region_t);
+ /* Initialize the mmu table */
+ memset(mmu_table, 0, sizeof(mmu_table));
+ /* Map the code/data section of ATF */
+ a9_mmu_setup_region(BL32_BASE, BL32_END - BL32_BASE, SECTION_ATTR_CACHED_MEM);
+ for (i = 0; i < region_cnt - 1; i++ ){
+ a9_mmu_setup_region((uint32_t)plat_arm_mmap[i].base_pa, plat_arm_mmap[i].size, SECTION_ATTR_DEVICE);
+ }
+}
+
+void a9_bl32_plat_enable_mmu(void)
+{
+ a9_mmu_invalidate_tlb();
+ a9_mmu_set_ttbr (mmu_table);
+ a9_mmu_enable();
+ a9_l1cache_enable_i();
+ a9_l1cache_enable_d();
+ if (plat_my_core_pos() != 0){
+ mmio_write_32(PL310_BASE + PL310_CTRL, 1);
+ }
+}
+#endif
+
+/*******************************************************************************
+ * Perform the very early platform specific architectural setup shared between
+ * ARM standard platforms. This only does basic initialization. Later
+ * architectural setup (bl31_arch_setup()) does not do anything platform
+ * specific.
+ ******************************************************************************/
+void arm_bl32_plat_arch_setup(void)
+{
+#if defined (PLATFORM_FLAVOR_63138)
+ a9_bl32_plat_map_mmu();
+ a9_bl32_plat_enable_mmu();
+#else
+ const mmap_region_t bl_regions[] = {
+ MAP_BL_SP_MIN_TOTAL,
+ ARM_MAP_BL_RO,
+#if USE_COHERENT_MEM
+ ARM_MAP_BL_COHERENT_RAM,
+#endif
+ {0}
+ };
+
+ generic_delay_timer_init();
+
+ setup_page_tables(bl_regions, plat_arm_get_mmap());
+
+ enable_mmu_svc_mon(0);
+#endif
+
+#if defined(BIUCFG_BASE) && !(defined (PLATFORM_FLAVOR_63138) || defined (PLATFORM_FLAVOR_63148))
+ /* Enable BUS access control for non-secure Linux */
+ *(unsigned int*)(BIUCFG_BASE + 0x300) = 0xFF;
+#endif
+}
+
+void sp_min_plat_arch_setup(void)
+{
+ arm_bl32_plat_arch_setup();
+}
+
+unsigned int plat_get_syscnt_freq2(void)
+{
+ return SYS_COUNTER_FREQ_IN_TICKS;
+}
+
+int plat_bcm_calc_core_pos(int mpidr)
+{
+ return plat_arm_calc_core_pos(mpidr);
+}
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/brcm_pm.c b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/brcm_pm.c
new file mode 100644
index 0000000000..5a207f8b13
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/brcm_pm.c
@@ -0,0 +1,261 @@
+/*
+<:copyright-BRCM:2018:DUAL/GPL:standard
+
+ Copyright (c) 2018 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+*/
+#include <arch_helpers.h>
+#include <assert.h>
+#include <debug.h>
+#include <gicv2.h>
+#include <platform_def.h>
+#include <platform.h>
+#include <psci.h>
+#include <bl31.h>
+#include <io.h>
+#include <delay_timer.h>
+#include <pmc_drv_special.h>
+
+extern int pmc_cpu_core_power_up(int cpu);
+extern int pmc_cpu_core_power_down(int cpu);
+extern void pmc_initmode(void);
+extern void udelay(uint32_t);
+extern void sp_min_warm_entrypoint(void);
+extern void gicv2_pcpu_distif_init(void);
+extern void gicv2_cpuif_enable(void);
+extern void a9_gic_secure_init(void);
+
+/*
+ * set specified CPU start address in the BIUCFG address space.
+ */
+#if defined (PLATFORM_FLAVOR_6858) && defined(BIUCFG_BASE)
+#define BIUCFG_EP_LO(i) ((void*)BIUCFG_BASE + 0x120 + (i) * 4)
+#else
+#define BIUCFG_EP_LO(i) ((void*)BIUCFG_BASE + 0x120 + (i) * 8)
+#define BIUCFG_EP_HI(i) ((void*)BIUCFG_BASE + 0x124 + (i) * 8)
+#endif
+
+static void biu_set_cpu_ep(int cpu, long ep)
+{
+#if defined(BIUCFG_BASE)
+#if defined (PLATFORM_FLAVOR_6858)
+ writel(((u32)ep) >> 8, BIUCFG_EP_LO(cpu));
+#else
+ writeq(ep, BIUCFG_EP_LO(cpu));
+#endif
+#elif defined(BIUCTRL_BASE)
+ BIUCTRL->power_cfg |= 1 << (cpu + BIU_CPU_CTRL_PWR_CFG_CPU0_BPCM_INIT_ON_SHIFT);
+ BIUCTRL->reset_cfg &= ~(0x1 << cpu);
+#endif
+
+#if (!defined (PLATFORM_FLAVOR_6858) && !defined (PLATFORM_FLAVOR_6856))
+#if defined(BOOT_LUT)
+ BOOT_LUT->bootLutRst = (u32)ep;
+#endif
+
+#if defined(BOOTLUT_BASE)
+ writel((u32)ep, (u32*)(BOOTLUT_BASE+0x20));
+#endif
+#endif
+}
+
+/*******************************************************************************
+ * Platform handler called to check the validity of the power state
+ * parameter. The power state parameter has to be a composite power state.
+ ******************************************************************************/
+static int brcm_validate_power_state(unsigned int power_state,
+ psci_power_state_t *req_state)
+{
+ return PSCI_E_SUCCESS;
+}
+
+/*******************************************************************************
+ * Platform handler called to check the validity of the non secure
+ * entrypoint.
+ ******************************************************************************/
+static int brcm_validate_ns_entrypoint(uintptr_t entrypoint)
+{
+ /*
+ * Check if the non secure entrypoint lies within the non
+ * secure DRAM.
+ */
+ return PSCI_E_SUCCESS;
+}
+
+/*******************************************************************************
+ * Platform handler called when a CPU is about to enter standby.
+ ******************************************************************************/
+static void brcm_cpu_standby(plat_local_state_t cpu_state)
+{
+
+ assert(cpu_state == PLAT_LOCAL_STATE_RET);
+
+ /*
+ * Enter standby state
+ * dsb is good practice before using wfi to enter low power states
+ */
+ dsb();
+ wfi();
+}
+
+/*******************************************************************************
+ * Platform handler called when a power domain is about to be turned on. The
+ * mpidr determines the CPU to be turned on.
+ ******************************************************************************/
+static int brcm_pwr_domain_on(u_register_t mpidr)
+{
+ int rc = PSCI_E_SUCCESS;
+
+ /*
+ * here it is assumed that CFE didn't start the CPUs. Set the
+ * CPU entry point and power the CPU up.
+ */
+#ifdef AARCH32
+ biu_set_cpu_ep(mpidr & 0xff, (long)sp_min_warm_entrypoint);
+#else
+ biu_set_cpu_ep(mpidr & 0xff, (long)bl31_warm_entrypoint);
+#endif
+ if (pmc_cpu_core_power_up(mpidr & 0xff) < 0)
+ rc = PSCI_E_INTERN_FAIL;
+ return rc;
+}
+
+/*******************************************************************************
+ * Platform handler called when a power domain is about to be turned off. The
+ * target_state encodes the power state that each level should transition to.
+ ******************************************************************************/
+void brcm_pwr_domain_off(const psci_power_state_t *target_state)
+{
+#if defined (PLATFORM_FLAVOR_63138)
+ assert(0);
+#else
+ gicv2_cpuif_disable();
+#endif
+}
+
+/*******************************************************************************
+ * Platform handler called when a power domain is about to be suspended. The
+ * target_state encodes the power state that each level should transition to.
+ ******************************************************************************/
+void brcm_pwr_domain_suspend(const psci_power_state_t *target_state)
+{
+ assert(0);
+}
+
+/*******************************************************************************
+ * Platform handler called when a power domain has just been powered on after
+ * being turned off earlier. The target_state encodes the low power state that
+ * each level has woken up from.
+ ******************************************************************************/
+void brcm_pwr_domain_on_finish(const psci_power_state_t *target_state)
+{
+ assert(target_state->pwr_domain_state[MPIDR_AFFLVL0] ==
+ PLAT_LOCAL_STATE_OFF);
+
+#if defined (PLATFORM_FLAVOR_63138)
+ a9_gic_secure_init();
+#else
+ /* TODO: This setup is needed only after a cold boot */
+ gicv2_pcpu_distif_init();
+
+ /* Enable the gic cpu interface */
+ gicv2_cpuif_enable();
+#endif
+}
+
+/*******************************************************************************
+ * Platform handler called when a power domain has just been powered on after
+ * having been suspended earlier. The target_state encodes the low power state
+ * that each level has woken up from.
+ ******************************************************************************/
+void brcm_pwr_domain_suspend_finish(const psci_power_state_t *target_state)
+{
+ assert(0);
+}
+
+/*******************************************************************************
+ * Platform handler called when a power domain is about to be turned off. The
+ * target_state encodes the power state that each level should transition to.
+ ******************************************************************************/
+__dead2 void brcm_pwr_domain_pwr_down_wfi(const psci_power_state_t *target_state)
+{
+ int idx = plat_my_core_pos();
+
+ pmc_cpu_core_power_down(idx);
+ psci_power_down_wfi();
+
+ panic();
+}
+
+/*******************************************************************************
+ * Platform handlers to shutdown/reboot the system
+ ******************************************************************************/
+static void __dead2 brcm_system_off(void)
+{
+ ERROR("BRCM System Off: operation not handled.\n");
+ panic();
+}
+
+static void __dead2 brcm_system_reset(void)
+{
+#if defined(WDTIMR0_BASE)
+ INFO("performing system reset from PSCI.\n");
+
+#if defined(AARCH32) && ! defined(PLATFORM_FLAVOR_6846)
+ WDTIMER0->WDTimerCtl = SOFT_RESET;
+#else
+ WDTIMER0->SoftRst = SOFT_RESET;
+#endif
+ /*
+ * delay 1 second before assuming reset has failed.
+ */
+ udelay(1000 * 1000);
+ ERROR("watchdog system reset failed.");
+ panic();
+#elif defined(TIMR_BASE)
+ ((volatile Timer * const) (TIMR_BASE + TIMR_OFFSET))->SoftRst |= SOFT_RESET;
+#endif
+ while(1);
+}
+
+static const plat_psci_ops_t plat_brcm_psci_pm_ops = {
+ .cpu_standby = brcm_cpu_standby,
+ .pwr_domain_on = brcm_pwr_domain_on,
+ .pwr_domain_off = brcm_pwr_domain_off,
+ .pwr_domain_suspend = brcm_pwr_domain_suspend,
+ .pwr_domain_on_finish = brcm_pwr_domain_on_finish,
+ .pwr_domain_suspend_finish = brcm_pwr_domain_suspend_finish,
+ .pwr_domain_pwr_down_wfi = brcm_pwr_domain_pwr_down_wfi,
+ .system_off = brcm_system_off,
+ .system_reset = brcm_system_reset,
+ .validate_power_state = brcm_validate_power_state,
+ .validate_ns_entrypoint = brcm_validate_ns_entrypoint
+};
+
+int plat_setup_psci_ops(uintptr_t sec_entrypoint,
+ const plat_psci_ops_t **psci_ops)
+{
+#if defined(PLATFORM_FLAVOR_63138) || defined (PMB_ADDR_ORION_CPU0)
+ pmc_initmode();
+#endif
+
+ *psci_ops = &plat_brcm_psci_pm_ops;
+
+ return 0;
+}
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/drivers/io.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/drivers/io.h
new file mode 100644
index 0000000000..cc01b888ea
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/drivers/io.h
@@ -0,0 +1,80 @@
+/*
+<:copyright-BRCM:2019:DUAL/GPL:standard
+
+ Copyright (c) 2019 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+*/
+/*
+ * io.h for atf
+ * Created by <nschichan at freebox.fr> on Thu Apr 18 19:26:20 2019
+ */
+
+#pragma once
+
+#include <mmio.h>
+
+typedef uint64_t u64;
+typedef uint32_t u32;
+typedef uint16_t u16;
+typedef uint8_t u8;
+
+typedef int64_t s64;
+typedef int32_t s32;
+typedef int16_t s16;
+typedef int8_t s8;
+
+static inline u64 readq(void *mem)
+{
+ return mmio_read_64((uintptr_t)mem);
+}
+
+static inline u32 readl(void *mem)
+{
+ return mmio_read_32((uintptr_t)mem);
+}
+
+static inline u16 readw(void *mem)
+{
+ return mmio_read_16((uintptr_t)mem);
+}
+
+static inline u8 readb(void *mem)
+{
+ return mmio_read_8((uintptr_t)mem);
+}
+
+static inline void writeq(u64 v, void *mem)
+{
+ return mmio_write_64((uintptr_t)mem, v);
+}
+
+static inline void writel(u32 v, void *mem)
+{
+ return mmio_write_32((uintptr_t)mem, v);
+}
+
+static inline void writew(u16 v, void *mem)
+{
+ return mmio_write_16((uintptr_t)mem, v);
+}
+
+static inline void writeb(u8 v, void *mem)
+{
+ return mmio_write_8((uintptr_t)mem, v);
+}
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/drivers/pmc_cpu_core.c b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/drivers/pmc_cpu_core.c
new file mode 100644
index 0000000000..992021efc7
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/drivers/pmc_cpu_core.c
@@ -0,0 +1,917 @@
+/*
+<:copyright-BRCM:2020:DUAL/GPL:standard
+
+ Copyright (c) 2020 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+*/
+#include <debug.h>
+#include <platform_def.h>
+#include <delay_timer.h>
+#include "pmc_drv.h"
+#include "pmc_cpu_core.h"
+#include "BPCM.h"
+
+void udelay(uint32_t usec);
+
+#if defined (PLATFORM_FLAVOR_63138)
+/* this power up function is implemented with assumption that cpu#0 will always
+ * be the first one that's powered up. */
+int pmc_cpu_core_power_up(unsigned cpu)
+{
+ int ret;
+ ARM_CONTROL_REG arm_ctrl;
+ ARM_CPUx_PWR_CTRL_REG arm_pwr_ctrl;
+
+ if (cpu == 0) {
+ /* in 63138, cpu#0 should've been powered on either by default or by PMC ROM.
+ * This code is for the future if PMC can shut down all the CPUs in
+ * hibernation and power them back up from other blocks. */
+
+ /* 1) Power on PLL */
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_control),
+ &arm_ctrl.Reg32);
+ if (ret)
+ return ret;
+ arm_ctrl.Bits.pll_ldo_pwr_on = 1;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_control),
+ arm_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ /* wait at least 1.0 usec */
+ udelay(2);
+
+ arm_ctrl.Bits.pll_pwr_on = 1;
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_control),
+ arm_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ /* 2) Power up CPU0 */
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_0),
+ &arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+ arm_pwr_ctrl.Bits.pwr_on = 0xf;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_0),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ do {
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_0),
+ &arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+ } while (arm_pwr_ctrl.Bits.pwr_on_status != 0xf);
+
+ arm_pwr_ctrl.Bits.pwr_ok = 0xf;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_0),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ do {
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_0),
+ &arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+ } while (arm_pwr_ctrl.Bits.pwr_ok_status != 0xf);
+
+ arm_ctrl.Bits.pll_clamp_on = 0;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_control),
+ arm_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ arm_pwr_ctrl.Bits.clamp_on = 0;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_0),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ /* 3) Power up CPU0 RAM */
+ arm_pwr_ctrl.Bits.mem_pda &= 0xe;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_0), arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ arm_pwr_ctrl.Bits.mem_pwr_on = 1;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_0), arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ do {
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_0), &arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+ } while (arm_pwr_ctrl.Bits.mem_pwr_on_status == 0);
+
+ arm_pwr_ctrl.Bits.mem_pwr_ok = 1;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_0), arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ do {
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_0), &arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+ } while (arm_pwr_ctrl.Bits.mem_pwr_ok_status == 0);
+
+ arm_pwr_ctrl.Bits.mem_clamp_on = 0;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_0),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ /* 4) Power up L2 cache */
+ pmc_cpu_l2cache_power_up();
+
+ /* 5) de-assert CPU0 reset */
+ arm_ctrl.Bits.cpu0_reset_n = 1;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_control),
+ arm_ctrl.Reg32);
+ if (ret)
+ return ret;
+ } else if (cpu == 1) {
+ /* check whether CPU1 is up and running already.
+ * Assuming once cpu1_reset_n is set, cpu1 is powered on
+ * and running */
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_control),
+ &arm_ctrl.Reg32);
+ if (ret)
+ return ret;
+ if (arm_ctrl.Bits.cpu1_reset_n == 1)
+ return 0;
+
+ /* 1) Power up CPU1 */
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_1),
+ &arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+ arm_pwr_ctrl.Bits.pwr_on |= 0x3;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_1),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ do {
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_1),
+ &arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+ } while ((arm_pwr_ctrl.Bits.pwr_on_status & 0x3) != 0x3);
+
+ arm_pwr_ctrl.Bits.pwr_ok |= 0x3;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_1),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ do {
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_1),
+ &arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+ } while ((arm_pwr_ctrl.Bits.pwr_ok_status & 0x3) != 0x3);
+
+ arm_pwr_ctrl.Bits.clamp_on = 0;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_1),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ /* 2) Power up CPU1 RAM */
+ arm_pwr_ctrl.Bits.mem_pda &= 0xe;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_1),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ arm_pwr_ctrl.Bits.mem_pwr_on = 1;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_1),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ do {
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_1),
+ &arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+ } while (arm_pwr_ctrl.Bits.mem_pwr_on_status == 0);
+
+ arm_pwr_ctrl.Bits.mem_pwr_ok = 1;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_1),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ do {
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_1),
+ &arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+ } while (arm_pwr_ctrl.Bits.mem_pwr_ok_status == 0);
+
+ arm_pwr_ctrl.Bits.mem_clamp_on = 0;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_1),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ /* 3) de-assert reset to CPU1 */
+ arm_ctrl.Bits.cpu1_reset_n = 1;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_control),
+ arm_ctrl.Reg32);
+ if (ret)
+ return ret;
+ } else {
+ printk("error in %s: we do not have CPU#%d\n", __func__, cpu);
+ return -1;
+ }
+
+ return 0;
+}
+
+/* this power_down function is implemented with assumption that CPU#0 will
+ * always be the last one to be powered down */
+/* Note: all the power_down codes have never been tested in 63138 */
+int pmc_cpu_core_power_down(unsigned cpu)
+{
+ int ret;
+ ARM_CONTROL_REG arm_ctrl;
+ ARM_CPUx_PWR_CTRL_REG arm_pwr_ctrl;
+
+ if (cpu == 0) {
+ /* 1) assert reset to CPU0 */
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_control),
+ &arm_ctrl.Reg32);
+ if (ret)
+ return ret;
+ arm_ctrl.Bits.cpu0_reset_n = 0;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_control),
+ arm_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ /* 2) power down L2 cache */
+ pmc_cpu_l2cache_power_down();
+
+ /* 3) power down CPU0 RAM */
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_0),
+ &arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+ arm_pwr_ctrl.Bits.mem_clamp_on = 1;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_0),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ arm_pwr_ctrl.Bits.mem_pwr_ok = 0;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_0),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ do {
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_0),
+ &arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+ } while (arm_pwr_ctrl.Bits.mem_pwr_ok_status == 0);
+
+ arm_pwr_ctrl.Bits.mem_pwr_on = 0;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_0),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ do {
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_0),
+ &arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+ } while (arm_pwr_ctrl.Bits.mem_pwr_on_status == 0);
+
+ arm_pwr_ctrl.Bits.mem_pda |= 0x1;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_0),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ /* 4) Power down CPU0 */
+
+ arm_pwr_ctrl.Bits.clamp_on = 1;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_0),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ arm_ctrl.Bits.pll_clamp_on = 1;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_control),
+ arm_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ arm_pwr_ctrl.Bits.pwr_ok = 0x0;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_0),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ do {
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_0),
+ &arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+ } while (arm_pwr_ctrl.Bits.pwr_ok_status != 0xf);
+
+ arm_pwr_ctrl.Bits.pwr_on = 0x0;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_0),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ do {
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_0),
+ &arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+ } while (arm_pwr_ctrl.Bits.pwr_on_status != 0xf);
+
+ /* 5) power down PLL */
+ arm_ctrl.Bits.pll_pwr_on = 0;
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_control),
+ arm_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ /* wait at least 1.0 usec */
+ udelay(2);
+
+ arm_ctrl.Bits.pll_ldo_pwr_on = 0;
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_control),
+ arm_ctrl.Reg32);
+ if (ret)
+ return ret;
+ } else if (cpu == 1) {
+ /* 1) assert reset to CPU1 */
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_control),
+ &arm_ctrl.Reg32);
+ if (ret)
+ return ret;
+ arm_ctrl.Bits.cpu1_reset_n = 0;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_control),
+ arm_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ /* 2) Power down RAM CPU1 */
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_1),
+ &arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+ arm_pwr_ctrl.Bits.mem_clamp_on = 1;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_1),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ arm_pwr_ctrl.Bits.mem_pwr_ok = 0;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_1),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ do {
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_1),
+ &arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+ } while (arm_pwr_ctrl.Bits.mem_pwr_ok_status == 0);
+
+ arm_pwr_ctrl.Bits.mem_pwr_on = 0;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_1),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ do {
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_1),
+ &arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+ } while (arm_pwr_ctrl.Bits.mem_pwr_on_status == 0);
+
+ arm_pwr_ctrl.Bits.mem_pda |= 0x1;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_1),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ /* 3) Power Down CPU1 */
+ arm_pwr_ctrl.Bits.clamp_on = 1;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_1),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ arm_pwr_ctrl.Bits.pwr_ok &= 0xc;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_1),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ do {
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_1),
+ &arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+ } while ((arm_pwr_ctrl.Bits.pwr_ok_status & 0x3) != 0x3);
+
+ arm_pwr_ctrl.Bits.pwr_on &= 0xc;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_1),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ do {
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_pwr_ctrl_1),
+ &arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+ } while ((arm_pwr_ctrl.Bits.pwr_on_status & 0x3) != 0x3);
+ } else {
+ printk("error in %s: we do not have CPU#%d\n", __func__, cpu);
+ return -1;
+ }
+
+ return 0;
+}
+
+int pmc_cpu_l2cache_power_up(void)
+{
+ int ret;
+ ARM_CPUx_PWR_CTRL_REG arm_pwr_ctrl;
+
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_neon_l2),
+ &arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ /* check if L2 cache is already power on. If it is, then just return 0 */
+ if ((arm_pwr_ctrl.Bits.mem_clamp_on == 0) &&
+ (arm_pwr_ctrl.Bits.mem_clamp_on == 0) &&
+ (arm_pwr_ctrl.Bits.mem_pwr_ok == 0x1) &&
+ (arm_pwr_ctrl.Bits.mem_pwr_on == 0x1))
+ return 0;
+
+ arm_pwr_ctrl.Bits.mem_pda = 0x0; /* set 0 to bit#8:11 */
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_neon_l2),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ arm_pwr_ctrl.Bits.mem_pwr_on = 1;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_neon_l2),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ do {
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_neon_l2),
+ &arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+ } while (arm_pwr_ctrl.Bits.mem_pwr_on_status == 0);
+
+ arm_pwr_ctrl.Bits.mem_pwr_ok = 1;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_neon_l2),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ do {
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_neon_l2),
+ &arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+ } while (arm_pwr_ctrl.Bits.mem_pwr_ok_status == 0);
+
+ arm_pwr_ctrl.Bits.mem_clamp_on = 0;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_neon_l2),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+int pmc_cpu_l2cache_power_down(void)
+{
+ int ret;
+ ARM_CPUx_PWR_CTRL_REG arm_pwr_ctrl;
+
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_neon_l2),
+ &arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ arm_pwr_ctrl.Bits.mem_clamp_on = 1;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_neon_l2),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ arm_pwr_ctrl.Bits.mem_pwr_ok = 0;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_neon_l2),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ do {
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_neon_l2),
+ &arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+ } while (arm_pwr_ctrl.Bits.mem_pwr_ok_status == 0);
+
+ arm_pwr_ctrl.Bits.mem_pwr_on = 0;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_neon_l2),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ do {
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_neon_l2),
+ &arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+ } while (arm_pwr_ctrl.Bits.mem_pwr_on_status == 0);
+
+ arm_pwr_ctrl.Bits.mem_pda = 0xf; /* set 0xf to bit#8:11 */
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_neon_l2),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+int pmc_cpu_neon_power_up(unsigned cpu)
+{
+ int ret;
+ ARM_CONTROL_REG arm_ctrl;
+ ARM_CPUx_PWR_CTRL_REG arm_pwr_ctrl;
+
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_control),
+ &arm_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_neon_l2),
+ &arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ /* check if neon is on and running aready. */
+ if ((arm_ctrl.Bits.neon_reset_n == 1) &&
+ (arm_pwr_ctrl.Bits.clamp_on == 0) &&
+ (arm_pwr_ctrl.Bits.pwr_ok & 0x1) &&
+ (arm_pwr_ctrl.Bits.pwr_on & 0x1))
+ return 0;
+
+ /* 1) Power up Neon */
+ arm_pwr_ctrl.Bits.pwr_on |= 1;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_neon_l2),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ do {
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_neon_l2),
+ &arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+ } while ((arm_pwr_ctrl.Bits.pwr_on_status & 0x1) == 0);
+
+ arm_pwr_ctrl.Bits.pwr_ok |= 1;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_neon_l2),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ do {
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_neon_l2),
+ &arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+ } while ((arm_pwr_ctrl.Bits.pwr_ok_status & 0x1) == 0);
+
+ arm_pwr_ctrl.Bits.clamp_on = 0;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_neon_l2),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ /* 2) De-assert reset to Neon */
+ arm_ctrl.Bits.neon_reset_n = 1;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_control),
+ arm_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+int pmc_cpu_neon_power_down(unsigned cpu)
+{
+ int ret;
+ ARM_CONTROL_REG arm_ctrl;
+ ARM_CPUx_PWR_CTRL_REG arm_pwr_ctrl;
+
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_control),
+ &arm_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_neon_l2),
+ &arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ /* 1) assert reset to Neon */
+ arm_ctrl.Bits.neon_reset_n = 0;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_control),
+ arm_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ /* 2) Power down Neon */
+ arm_pwr_ctrl.Bits.clamp_on = 1;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_neon_l2),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ arm_pwr_ctrl.Bits.pwr_ok &= 0xe;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_neon_l2),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ do {
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_neon_l2),
+ &arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+ } while ((arm_pwr_ctrl.Bits.pwr_ok_status & 0x1) == 1);
+
+ arm_pwr_ctrl.Bits.pwr_on &= 0xe;
+
+ ret = WriteBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_neon_l2),
+ arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+
+ do {
+ ret = ReadBPCMRegister(PMB_ADDR_AIP,
+ ARMBPCMRegOffset(arm_neon_l2),
+ &arm_pwr_ctrl.Reg32);
+ if (ret)
+ return ret;
+ } while ((arm_pwr_ctrl.Bits.pwr_on_status & 0x1) == 1);
+
+ return 0;
+}
+
+#else
+
+#if defined (PMB_ADDR_ORION_CPU0)
+static uint32_t pmb_cpu_id[] = {
+ PMB_ADDR_ORION_CPU0,
+ PMB_ADDR_ORION_CPU1,
+#if defined(PMB_ADDR_ORION_CPU2)
+ PMB_ADDR_ORION_CPU2,
+#endif
+#if defined(PMB_ADDR_ORION_CPU3)
+ PMB_ADDR_ORION_CPU3
+#endif
+};
+#endif
+
+int pmc_cpu_core_power_up(unsigned cpu)
+{
+#if defined (PLATFORM_FLAVOR_63148)
+ B15CTRL->cpu_ctrl.cpu1_pwr_zone_ctrl |= 0x400;
+ B15CTRL->cpu_ctrl.reset_cfg &= 0xfffffffd;
+#elif defined (PMB_ADDR_ORION_CPU0) || defined (PLATFORM_FLAVOR_6846)
+ int error;
+ uint32_t arm_control;
+
+#if defined (PMB_ADDR_ORION_CPU0)
+ error = ResetDevice(pmb_cpu_id[cpu]);
+ if (error) {
+ ERROR("unable to power on CPU%d\n", cpu);
+ return error;
+ }
+#endif
+
+ error = ReadBPCMRegister(PMB_ADDR_BIU_BPCM,
+ ARMBPCMRegOffset(arm_control),
+ &arm_control);
+ if (error) {
+ ERROR("unable to release CPU%d reset.\n", cpu);
+ return error;
+ }
+ arm_control &= ~(1 << cpu);
+ error = WriteBPCMRegister(PMB_ADDR_BIU_BPCM,
+ ARMBPCMRegOffset(arm_control),
+ arm_control);
+ if (error) {
+ ERROR("unable to release CPU%d reset.\n", cpu);
+ return error;
+ }
+ udelay(100); // wait for cpu to come out of reset
+ INFO("pmc_cpu: powered up CPU%d\n", cpu);
+#elif defined (BIUCTRL_BASE)
+ if (BIUCTRL->cpu_pwr_zone_ctrl[cpu] & BIU_CPU_CTRL_PWR_ZONE_CTRL_ZONE_RESET) {
+ BIUCTRL->power_cfg |= BIU_CPU_CTRL_PWR_CFG_CPU0_BPCM_INIT_ON << cpu;
+ BIUCTRL->cpu_pwr_zone_ctrl[cpu] = BIU_CPU_CTRL_PWR_ZONE_CTRL_PWR_UP_REQ |
+ (BIUCTRL->cpu_pwr_zone_ctrl[cpu] & ~BIU_CPU_CTRL_PWR_ZONE_CTRL_PWR_DN_REQ);
+
+ udelay(100); // wait for cpu to come out of reset
+ }
+#endif
+ return 0;
+}
+
+int pmc_cpu_core_power_down(unsigned cpu)
+{
+#if defined (BIUCTRL_BASE)
+ BIUCTRL->power_cfg &= ~(BIU_CPU_CTRL_PWR_CFG_CPU0_BPCM_INIT_ON << cpu);
+ BIUCTRL->cpu_pwr_zone_ctrl[cpu] = BIU_CPU_CTRL_PWR_ZONE_CTRL_PWR_DN_REQ |
+ (BIUCTRL->cpu_pwr_zone_ctrl[cpu] & ~BIU_CPU_CTRL_PWR_ZONE_CTRL_PWR_UP_REQ);
+#endif
+ return 0;
+}
+#endif /* PLATFORM_FLAVOR_63138 */
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/drivers/pmc_drv.c b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/drivers/pmc_drv.c
new file mode 100644
index 0000000000..0718e0c7b0
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/drivers/pmc_drv.c
@@ -0,0 +1,510 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * Copyright 2019 Broadcom Ltd.
+ */
+/*
+<:copyright-BRCM:2013:DUAL/GPL:standard
+
+ Copyright (c) 2013 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+*/
+
+#include <debug.h>
+#include <platform_def.h>
+#include <delay_timer.h>
+#include "pmc_drv.h"
+#include "BPCM.h"
+#include "command.h"
+
+#if IS_BCMCHIP(6858) || defined(PMC_IMPL_3_X)
+#include "clk_rst.h"
+#endif
+
+int pmc_mode = PMC_MODE_DQM;
+
+static int SendAndWait(TCommand * cmd, TCommand * rsp)
+{
+#if defined(PMC_ON_HOSTCPU)
+ rsp->u.cmdGenericParams.params[0] = 0;
+ rsp->u.cmdGenericParams.params[1] = 0;
+ return 0;
+#else
+#if IS_BCMCHIP(63138)
+ /* translate new cmdID into old cmdID that the pmc will understand NB:
+ * requires cmdIDs below to be the new versions
+ */
+
+ static const unsigned char newToOldcmdIDMap[] = {
+ [cmdSetRunState] = 64, // cmdSetRunState,
+ [cmdSetPowerState] = 65, // cmdSetPowerState,
+ [cmdShutdownAllowed] = 66, // cmdShutdownAllowed,
+ [cmdGetSelect0] = 67, // cmdGetSelect0,
+ [cmdGetSelect3] = 68, // cmdGetSelect3,
+ [cmdGetAvsDisableState] = 69, // cmdGetAvsDisableState,
+ [cmdGetPVT] = 70, // cmdGetPVT,
+ [cmdPowerDevOnOff] = 129, // cmdPowerDevOnOff,
+ [cmdPowerZoneOnOff] = 130, // cmdPowerZoneOnOff,
+ [cmdResetDevice] = 131, // cmdResetDevice,
+ [cmdResetZone] = 132, // cmdResetZone,
+ [cmdAllocateG2UDQM] = 133, // cmdAllocateG2UDQM,
+ [cmdQSMAvailable] = 134, // cmdQSMAvailable,
+ [cmdRevision] = 135, // cmdRevision,
+ };
+
+ static int pmc_remap = 0;
+#endif
+ static uint32_t reqdID = 1;
+ int status = kPMC_COMMAND_TIMEOUT;
+ TCommand dummy;
+
+#if defined(BOOT_MEMC_SRAM)
+ reqdID = 1;
+#endif
+ pmc_spin_lock();
+
+ /* clear previous rsp data if any */
+ while (PMC->dqm.notEmptySts & PMC_DQM_RPL_STS) {
+ if (!rsp)
+ rsp = &dummy;
+
+ rsp->word0.Reg32 = PMC->dqmQData[PMC_DQM_RPL_NUM].word[0];
+ rsp->word1.Reg32 = PMC->dqmQData[PMC_DQM_RPL_NUM].word[1];
+ rsp->u.cmdGenericParams.params[0] =
+ PMC->dqmQData[PMC_DQM_RPL_NUM].word[2];
+ rsp->u.cmdGenericParams.params[1] =
+ PMC->dqmQData[PMC_DQM_RPL_NUM].word[3];
+
+ printk
+ ("PMC reqdID=%d previous rsp.word[0-3]=0x[%08x %08x %08x %08x] status=%d\n",
+ reqdID, rsp->word0.Reg32, rsp->word1.Reg32,
+ rsp->u.cmdGenericParams.params[0],
+ rsp->u.cmdGenericParams.params[1], rsp->word0.Bits.error);
+ }
+
+#if IS_BCMCHIP(63138)
+ if (pmc_remap && cmd->word0.Bits.cmdID < sizeof newToOldcmdIDMap &&
+ newToOldcmdIDMap[cmd->word0.Bits.cmdID])
+ cmd->word0.Bits.cmdID = newToOldcmdIDMap[cmd->word0.Bits.cmdID];
+#endif
+
+#ifdef PMC_LOG_IN_DTCM
+ if (cmd->word0.Bits.cmdID == cmdCloseAVS)
+ PMC->ctrl.hostMboxOut = 1; // request sync dtcm log
+#endif
+
+ cmd->word0.Bits.msgID = reqdID;
+
+ /* send the command */
+ PMC->dqmQData[PMC_DQM_REQ_NUM].word[0] = cmd->word0.Reg32;
+ PMC->dqmQData[PMC_DQM_REQ_NUM].word[1] = cmd->word1.Reg32;
+ PMC->dqmQData[PMC_DQM_REQ_NUM].word[2] =
+ cmd->u.cmdGenericParams.params[0];
+ PMC->dqmQData[PMC_DQM_REQ_NUM].word[3] =
+ cmd->u.cmdGenericParams.params[1];
+
+#ifdef CONFIG_BRCM_IKOS
+ /* We do not enable PMC TIMER here for IKOS, or it will wait forever */
+ while (!(PMC->dqm.notEmptySts & PMC_DQM_RPL_STS)) ;
+#elif defined(PMC_IMPL_3_X)
+#ifdef PMC_LOG_IN_DTCM
+ if (cmd->word0.Bits.cmdID == cmdCloseAVS) {
+ while (!(PMC->dqm.notEmptySts & PMC_DQM_RPL_STS))
+ pmc_show_log_item();
+
+ PMC->ctrl.hostMboxOut = 0; // ignore dtcm log
+ }
+ else
+#endif // #ifdef PMC_LOG_IN_DTCM
+ {
+ PMC->ctrl.gpTmr0Ctl = ((1 << 31) | (1 << 29) |
+ ((400000 << 1) & 0x1fffffff)); // 400ms
+
+ while (!(PMC->dqm.notEmptySts & PMC_DQM_RPL_STS) &&
+ (PMC->ctrl.gpTmr0Ctl & (1 << 31))) ;
+ }
+#else
+ PMC->ctrl.gpTmr2Ctl = ((1 << 31) | (1 << 29) | 400000); // 400ms
+
+ while (!(PMC->dqm.notEmptySts & PMC_DQM_RPL_STS) &&
+ (PMC->ctrl.gpTmr2Ctl & (1 << 31))) {
+#if !defined(_CFE_) && (IS_BCMCHIP(63148) || IS_BCMCHIP(4908))
+ /* Do not tight poll the PMC registers for longer command */
+ if (cmd->word0.Bits.cmdID == cmdCloseAVS)
+ udelay(1000);
+#endif
+ }
+#endif /* CONFIG_BRCM_IKOS */
+
+ if (PMC->dqm.notEmptySts & PMC_DQM_RPL_STS) {
+ if (!rsp)
+ rsp = &dummy;
+
+ /* command didn't timeout, fill in the response */
+ rsp->word0.Reg32 = PMC->dqmQData[PMC_DQM_RPL_NUM].word[0];
+ rsp->word1.Reg32 = PMC->dqmQData[PMC_DQM_RPL_NUM].word[1];
+ rsp->u.cmdGenericParams.params[0] =
+ PMC->dqmQData[PMC_DQM_RPL_NUM].word[2];
+ rsp->u.cmdGenericParams.params[1] =
+ PMC->dqmQData[PMC_DQM_RPL_NUM].word[3];
+
+ if (rsp->word0.Bits.msgID == reqdID)
+ status = rsp->word0.Bits.error;
+ else
+ status = kPMC_MESSAGE_ID_MISMATCH;
+
+ if (status != kPMC_NO_ERROR)
+ printk
+ ("PMC reqdID=%d error=%d rsp.word[0-3]=0x[%08x %08x %08x %08x]\n",
+ reqdID, status, rsp->word0.Reg32, rsp->word1.Reg32,
+ rsp->u.cmdGenericParams.params[0],
+ rsp->u.cmdGenericParams.params[1]);
+ }
+
+ reqdID = (reqdID + 1) & 0xff;
+
+ pmc_spin_unlock();
+
+ return status;
+#endif
+}
+
+static int SendCmd(TCommand * cmd, int cmdID, int devAddr, int zone, int island,
+ TCommand * rsp)
+{
+ cmd->word0.Reg32 = 0;
+ cmd->word0.Bits.cmdID = cmdID;
+ cmd->word1.Reg32 = 0;
+ cmd->word1.Bits.devAddr = devAddr;
+ cmd->word1.Bits.zoneIdx = zone;
+ cmd->word1.Bits.island = island;
+
+ return SendAndWait(cmd, rsp);
+}
+
+int SendCommand(int cmdID, int devAddr, int zone, int island, uint32_t word2,
+ uint32_t word3, TCommand * rsp)
+{
+ TCommand cmd;
+
+ cmd.u.cmdGenericParams.params[0] = word2;
+ cmd.u.cmdGenericParams.params[1] = word3;
+
+ return SendCmd(&cmd, cmdID, devAddr, zone, island, rsp);
+}
+
+
+#if defined(PMC_IMPL_3_X) || defined(PMC_ON_HOSTCPU)
+#ifdef PMC_ON_HOSTCPU
+#define KEYHOLE_IDX 1
+#else
+#define KEYHOLE_IDX 0
+#endif
+int read_bpcm_reg_direct(int devAddr, int wordOffset, uint32_t * value)
+{
+ int status = kPMC_NO_ERROR;
+ int bus = (devAddr >> PMB_BUS_ID_SHIFT) & 0x3;
+ uint32_t address, ctlSts;
+ volatile PMB_keyhole_reg *keyhole = &PMB->keyhole[KEYHOLE_IDX];
+
+
+ address =
+ ((devAddr & 0xff) *
+ ((PMB->
+ config >> PMB_NUM_REGS_SHIFT) & PMB_NUM_REGS_MASK)) |
+ (wordOffset);
+
+ keyhole->control =
+ PMC_PMBM_START | (bus << PMC_PMBM_BUS_SHIFT) | (PMC_PMBM_Read) |
+ address;
+ ctlSts = keyhole->control;
+ while (ctlSts & PMC_PMBM_BUSY)
+ ctlSts = keyhole->control; /*wait for completion */
+
+ if (ctlSts & PMC_PMBM_TIMEOUT)
+ status = kPMC_COMMAND_TIMEOUT;
+ else
+ *value = keyhole->rd_data;
+
+ return status;
+}
+
+int write_bpcm_reg_direct(int devAddr, int wordOffset, uint32_t value)
+{
+ int status = kPMC_NO_ERROR;
+ int bus = (devAddr >> PMB_BUS_ID_SHIFT) & 0x3;
+ uint32_t address, ctlSts;
+ volatile PMB_keyhole_reg *keyhole = &PMB->keyhole[KEYHOLE_IDX];
+
+ address =
+ ((devAddr & 0xff) *
+ ((PMB->
+ config >> PMB_NUM_REGS_SHIFT) & PMB_NUM_REGS_MASK)) |
+ (wordOffset);
+ keyhole->wr_data = value;
+ keyhole->control =
+ PMC_PMBM_START | (bus << PMC_PMBM_BUS_SHIFT) | (PMC_PMBM_Write) |
+ address;
+
+ ctlSts = keyhole->control;
+ while (ctlSts & PMC_PMBM_BUSY)
+ ctlSts = keyhole->control; /*wait for completion */
+
+ if (ctlSts & PMC_PMBM_TIMEOUT)
+ status = kPMC_COMMAND_TIMEOUT;
+
+ return status;
+}
+
+
+#else // #if defined(PMC_IMPL_3_X) || defined(PMC_ON_HOSTCPU)
+int read_bpcm_reg_direct(int devAddr, int wordOffset, uint32_t * value)
+{
+ int status = kPMC_NO_ERROR;
+ int bus = (devAddr >> PMB_BUS_ID_SHIFT) & 0x3;
+ volatile PMBMaster *pmbm_ptr;
+
+ if (bus >= PMB_BUS_MAX)
+ return kPMC_INVALID_BUS;
+
+ pmbm_ptr = &(PROCMON->PMBM[bus]);
+
+ /* Make sure PMBM is not busy */
+
+ pmbm_ptr->ctrl = PMC_PMBM_START | PMC_PMBM_Read |
+ ((devAddr & 0xff) << 12) | wordOffset;
+
+ while (pmbm_ptr->ctrl & PMC_PMBM_START) ;
+
+ if (pmbm_ptr->ctrl & PMC_PMBM_TIMEOUT)
+ status = kPMC_COMMAND_TIMEOUT;
+ else
+ *value = pmbm_ptr->rd_data;
+
+ return status;
+}
+
+int write_bpcm_reg_direct(int devAddr, int wordOffset, uint32_t value)
+{
+ int bus = (devAddr >> PMB_BUS_ID_SHIFT) & 0x3;
+ int status = kPMC_NO_ERROR;
+ volatile PMBMaster *pmbm_ptr;
+ if (bus >= PMB_BUS_MAX)
+ return kPMC_INVALID_BUS;
+
+ pmbm_ptr = &(PROCMON->PMBM[bus]);
+
+ pmbm_ptr->wr_data = value;
+ pmbm_ptr->ctrl = PMC_PMBM_START | PMC_PMBM_Write |
+ ((devAddr & 0xff) << 12) | wordOffset;
+
+ while (pmbm_ptr->ctrl & PMC_PMBM_START) ;
+
+ if (pmbm_ptr->ctrl & PMC_PMBM_TIMEOUT)
+ status = kPMC_COMMAND_TIMEOUT;
+
+ return status;
+}
+#endif // #if defined(PMC_IMPL_3_X) || defined(PMC_ON_HOSTCPU)
+
+/* note: all the [Read|Write][BPCM|Zone]Register functions are different from
+ * how they are defined in firmware code. In the driver code, it takes in
+ * wordOffset as the argument, but in the firmware code, it uses byteOffset */
+int ReadBPCMRegister(int devAddr, int wordOffset, uint32_t * value)
+{
+ int status = kPMC_INVALID_STATE;
+
+ if (PMC_ACCESS_BPCM_DIRECT || pmc_mode == PMC_MODE_PMB_DIRECT) {
+ pmc_spin_lock();
+ status = read_bpcm_reg_direct(devAddr, wordOffset, value);
+ pmc_spin_unlock();
+ } else if (pmc_mode == PMC_MODE_DQM) {
+ TCommand rsp;
+ status =
+ SendCommand(cmdReadBpcmReg, devAddr, 0, 0, wordOffset, 0,
+ &rsp);
+
+ if (status == kPMC_NO_ERROR)
+ *value = rsp.u.cmdResponse.word2;
+ }
+
+ return status;
+}
+
+int WriteBPCMRegister(int devAddr, int wordOffset, uint32_t value)
+{
+ int status = kPMC_INVALID_STATE;
+
+ if (PMC_ACCESS_BPCM_DIRECT || pmc_mode == PMC_MODE_PMB_DIRECT) {
+ pmc_spin_lock();
+ status = write_bpcm_reg_direct(devAddr, wordOffset, value);
+ pmc_spin_unlock();
+ } else if (pmc_mode == PMC_MODE_DQM) {
+ status =
+ SendCommand(cmdWriteBpcmReg, devAddr, 0, 0, wordOffset,
+ value, 0);
+ }
+
+ return status;
+}
+
+
+int PowerOnZone(int devAddr, int zone)
+{
+ BPCM_PWR_ZONE_N_CONTROL reg;
+ int status;
+
+#if IS_BCMCHIP(6858)
+ /* Do not use DQM command cmdPowerZoneOnOff for non 6858 because this command is only available if a
+ PMC application has been uploaded to expand the PMC boot rom functionality */
+ if (pmc_mode == PMC_MODE_DQM) {
+ TCommand cmd = {0};
+ cmd.u.cmdStateOnlyParam.state = 1;
+ return SendCmd(&cmd, cmdPowerZoneOnOff, devAddr, zone, 0, 0);
+ }
+#endif
+
+ status =
+ ReadBPCMRegister(devAddr, BPCMRegOffset(zones[zone].control),
+ ®.Reg32);
+ if (status == kPMC_NO_ERROR && reg.Bits.pwr_on_state == 0) {
+ reg.Bits.pwr_dn_req = 0;
+ reg.Bits.dpg_ctl_en = 1;
+ reg.Bits.pwr_up_req = 1;
+ reg.Bits.mem_pwr_ctl_en = 1;
+ reg.Bits.blk_reset_assert = 1;
+ status =
+ WriteBPCMRegister(devAddr,
+ BPCMRegOffset(zones[zone].control),
+ reg.Reg32);
+ }
+ return status;
+}
+
+int PowerOnDevice(int devAddr)
+{
+ if (PMC_ACCESS_BPCM_DIRECT || pmc_mode == PMC_MODE_PMB_DIRECT) {
+ int ix, status;
+ BPCM_CAPABILITES_REG capabilities;
+
+ status =
+ ReadBPCMRegister(devAddr, BPCMRegOffset(capabilities),
+ &capabilities.Reg32);
+ for (ix = 0;
+ (ix < capabilities.Bits.num_zones)
+ && (status == kPMC_NO_ERROR); ix++) {
+ status = PowerOnZone(devAddr, ix);
+ }
+
+ return status;
+ }
+
+ if (pmc_mode == PMC_MODE_DQM) {
+ TCommand cmd = {0};
+ cmd.u.cmdPowerDevice.state = 1;
+ return SendCmd(&cmd, cmdPowerDevOnOff, devAddr, 0, 0, 0);
+ }
+
+ return kPMC_INVALID_STATE;
+}
+
+int PowerOffDevice(int devAddr, int repower)
+{
+ if (PMC_ACCESS_BPCM_DIRECT || pmc_mode == PMC_MODE_PMB_DIRECT) {
+ /* we can power off the entire device by powering off the 0th zone. */
+ BPCM_PWR_ZONE_N_CONTROL reg;
+ int status;
+
+ status =
+ ReadBPCMRegister(devAddr, BPCMRegOffset(zones[0].control),
+ ®.Reg32);
+
+ if (status == kPMC_NO_ERROR && reg.Bits.pwr_off_state == 0) {
+ reg.Bits.pwr_dn_req = 1;
+ WriteBPCMRegister(devAddr,
+ BPCMRegOffset(zones[0].control),
+ reg.Reg32);
+ }
+
+ return status;
+ }
+
+ if (pmc_mode == PMC_MODE_DQM) {
+ TCommand cmd = {0};
+ cmd.u.cmdPowerDevice.state = 0;
+ cmd.u.cmdPowerDevice.restore = repower;
+ return SendCmd(&cmd, cmdPowerDevOnOff, devAddr, 0, 0, 0);
+ }
+
+ return kPMC_INVALID_STATE;
+}
+
+int ResetDevice(int devAddr)
+{
+ /* all zones had their blk_reset_assert bits set at initial config time */
+ BPCM_PWR_ZONE_N_CONTROL reg;
+ int status;
+
+#if IS_BCMCHIP(6858)
+ /* Do not use DQM command cmdResetDevice for non 6858 because this command is only available if a
+ PMC application has been uploaded to expand the PMC boot rom functionality */
+ if (pmc_mode == PMC_MODE_DQM)
+ return SendCommand(cmdResetDevice, devAddr, 0, 0, 0, 0, 0);
+#endif
+
+ status = PowerOffDevice(devAddr, 0);
+ do {
+ status =
+ ReadBPCMRegister(devAddr, BPCMRegOffset(zones[0].control),
+ ®.Reg32);
+ } while ((reg.Bits.pwr_off_state != 1) && (status == kPMC_NO_ERROR));
+ if (status == kPMC_NO_ERROR)
+ status = PowerOnDevice(devAddr);
+ return status;
+}
+
+// initalize pmc_mode (possibly) before printk available
+void pmc_initmode(void)
+{
+#if defined MISC_STRAP_BUS_PMC_ROM_BOOT
+ /* read the strap pin and based on the strap pin, choose the mode */
+ if ((MISC->miscStrapBus & MISC_STRAP_BUS_PMC_ROM_BOOT) == 0)
+ pmc_mode = PMC_MODE_PMB_DIRECT;
+#else // #if defined MISC_STRAP_BUS_PMC_ROM_BOOT
+#if IS_BCMCHIP(6858)
+ pmc_mode = PMC_MODE_DQM;
+#else
+ pmc_mode = PMC_MODE_PMB_DIRECT;
+#ifdef CFG_RAMAPP
+#if IS_BCMCHIP(63158)
+ /* MIPS based PMC */
+ if (PMC->ctrl.softResets == 0)
+ pmc_mode = PMC_MODE_DQM;
+#elif defined(PMC_IMPL_3_X)
+ /* Maestro based PMC) */
+ if (PROCMON->maestroReg.coreCtrl.coreEnable == 1)
+ pmc_mode = PMC_MODE_DQM;
+#endif // #if IS_BCMCHIP(63158)
+#endif // #ifdef CFG_RAMAPP
+#endif // #if IS_BCMCHIP(6858)
+#endif // #if defined MISC_STRAP_BUS_PMC_ROM_BOOT
+}
+
+
+
+
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/dt.c b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/dt.c
new file mode 100644
index 0000000000..f732a6d5d2
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/dt.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#include <console.h>
+#include <debug.h>
+#include <libfdt.h>
+#include <psci.h>
+#include "qemu_private.h"
+#include <string.h>
+
+static int append_psci_compatible(void *fdt, int offs, const char *str)
+{
+ return fdt_appendprop(fdt, offs, "compatible", str, strlen(str) + 1);
+}
+
+int dt_add_psci_node(void *fdt)
+{
+ int offs;
+
+ if (fdt_path_offset(fdt, "/psci") >= 0) {
+ WARN("PSCI Device Tree node already exists!\n");
+ return 0;
+ }
+
+ offs = fdt_path_offset(fdt, "/");
+ if (offs < 0)
+ return -1;
+ offs = fdt_add_subnode(fdt, offs, "psci");
+ if (offs < 0)
+ return -1;
+ if (append_psci_compatible(fdt, offs, "arm,psci-1.0"))
+ return -1;
+ if (append_psci_compatible(fdt, offs, "arm,psci-0.2"))
+ return -1;
+ if (append_psci_compatible(fdt, offs, "arm,psci"))
+ return -1;
+ if (fdt_setprop_string(fdt, offs, "method", "smc"))
+ return -1;
+ if (fdt_setprop_u32(fdt, offs, "cpu_suspend", PSCI_CPU_SUSPEND_AARCH64))
+ return -1;
+ if (fdt_setprop_u32(fdt, offs, "cpu_off", PSCI_CPU_OFF))
+ return -1;
+ if (fdt_setprop_u32(fdt, offs, "cpu_on", PSCI_CPU_ON_AARCH64))
+ return -1;
+ if (fdt_setprop_u32(fdt, offs, "sys_poweroff", PSCI_SYSTEM_OFF))
+ return -1;
+ if (fdt_setprop_u32(fdt, offs, "sys_reset", PSCI_SYSTEM_RESET))
+ return -1;
+ return 0;
+}
+
+static int check_node_compat_prefix(void *fdt, int offs, const char *prefix)
+{
+ const size_t prefix_len = strlen(prefix);
+ size_t l;
+ int plen;
+ const char *prop;
+
+ prop = fdt_getprop(fdt, offs, "compatible", &plen);
+ if (!prop)
+ return -1;
+
+ while (plen > 0) {
+ if (memcmp(prop, prefix, prefix_len) == 0)
+ return 0; /* match */
+
+ l = strlen(prop) + 1;
+ prop += l;
+ plen -= l;
+ }
+
+ return -1;
+}
+
+int dt_add_psci_cpu_enable_methods(void *fdt)
+{
+ int offs = 0;
+
+ while (1) {
+ offs = fdt_next_node(fdt, offs, NULL);
+ if (offs < 0)
+ break;
+ if (fdt_getprop(fdt, offs, "enable-method", NULL))
+ continue; /* already set */
+ if (check_node_compat_prefix(fdt, offs, "arm,cortex-a"))
+ continue; /* no compatible */
+ if (fdt_setprop_string(fdt, offs, "enable-method", "psci"))
+ return -1;
+ /* Need to restart scanning as offsets may have changed */
+ offs = 0;
+ }
+ return 0;
+}
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/BPCM.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/BPCM.h
new file mode 100644
index 0000000000..41df3f1197
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/BPCM.h
@@ -0,0 +1,2511 @@
+/*
+<:copyright-BRCM:2013:DUAL/GPL:standard
+
+ Copyright (c) 2013 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+*/
+#ifndef BPCM_H
+#define BPCM_H
+
+#ifndef NULL
+#define NULL ((void *)0)
+#endif
+
+#ifndef _TYPEDEFS_H_
+#ifndef _UINT32_T_DECLARED
+typedef unsigned int uint32_t;
+#define _UINT32_T_DECLARED
+#endif
+#ifndef _UINT64_T_DECLARED
+typedef unsigned long long uint64_t;
+#define _UINT64_T_DECLARED
+#endif
+#endif
+
+#ifndef IS_BCMCHIP
+#define IS_BCMCHIP(num) (defined(_BCM9##num##_)||defined(CONFIG_BCM9##num)||\
+ defined(CONFIG_BCM##num))
+#endif
+
+typedef union {
+ struct {
+#if IS_BCMCHIP(6846) || IS_BCMCHIP(6856) || IS_BCMCHIP(63178) || IS_BCMCHIP(6878) || IS_BCMCHIP(63146)\
+ || IS_BCMCHIP(4912) || IS_BCMCHIP(6855)
+ uint32_t pmbAddr:12; // [11:00]
+ uint32_t map_rev:4; // [15:12] always non-zero for AVS3 devices (see CLASSIC_BPCM_ID_REG below)
+ uint32_t island:4; // [19:16]
+ uint32_t devType:4; // [23:20] see enum above
+ uint32_t hw_rev:8; // [31:24]
+#else
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t pmb_Addr:8;
+ uint32_t hw_rev:8;
+ uint32_t sw_strap:16;
+#else
+ uint32_t sw_strap:16;
+ uint32_t hw_rev:8;
+ uint32_t pmb_Addr:8;
+#endif
+#endif
+ } Bits;
+ uint32_t Reg32;
+} BPCM_ID_REG;
+
+#if IS_BCMCHIP(6846) || IS_BCMCHIP(6856)
+
+typedef union {
+ struct {
+ uint32_t pmb_Addr:8; // [07:00]
+ uint32_t hw_rev:4; // [11:08]
+ uint32_t map_rev:4; // [15:12] always zero for classic devices (technically upper 4-bits of hw_rev)
+ uint32_t sw_strap:16; // [31:16]
+ } Bits;
+ uint32_t Reg32;
+} CLASSIC_BPCM_ID_REG;
+#endif
+
+#if !IS_BCMCHIP(6878) && !IS_BCMCHIP(6855)
+// types of PMB devices
+enum {
+ kPMB_BPCM = 0,
+ kPMB_MIPS_PLL = 1,
+ kPMB_GEN_PLL = 2,
+ kPMB_LC_PLL = 3,
+ // 4..15 reserved
+};
+#else
+enum {
+ kPMB_NO_DEVICE = 0,
+ kPMB_BPCM = 1, // in AVS3, this structure does not contain ARS registers (except for "classic" BPCM devices)
+ kPMB_MIPS_PLL = 2,
+ kPMB_GEN_PLL = 3,
+ kPMB_LC_PLL = 4,
+ kPMB_CLKRST = 5,
+ kPMB_PVTMON = 6, // used in in AVS3 when PVT is wrapped in a BPCM structure
+ kPMB_TMON_INTERNAL = 7, // ditto - used when TMON thermistor is on-die
+ kPMB_TMON_EXTERNAL = 8, // ditto - used when thermistor is off-die
+ kPMB_ARS = 9, // AVS Remote Sensors - remote oscillators and Power-Watchdog
+ // 10..15 reserved
+};
+#endif
+
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+#if IS_BCMCHIP(63146) || IS_BCMCHIP(4912)
+ uint32_t num_zones:6;
+ uint32_t reserved0:2;
+#else
+ uint32_t num_zones:8;
+#endif
+ uint32_t num_sr_bits:8;
+ uint32_t devType:4; // see enum above
+ uint32_t reserved1:12;
+#else
+ uint32_t reserved1:12;
+ uint32_t devType:4; // see enum above
+ uint32_t num_sr_bits:8;
+#if IS_BCMCHIP(63146) || IS_BCMCHIP(4912)
+ uint32_t reserved0:2;
+ uint32_t num_zones:6;
+#else
+ uint32_t num_zones:8;
+#endif
+#endif
+ } Bits;
+ uint32_t Reg32;
+} BPCM_CAPABILITES_REG;
+
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t pwd_alert:1;
+ uint32_t reserved:31;
+#else
+ uint32_t reserved:31;
+ uint32_t pwd_alert:1;
+#endif
+ } Bits;
+ uint32_t Reg32;
+} BPCM_STATUS_REG;
+
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t ro_en_s:1;
+ uint32_t ro_en_h:1;
+ uint32_t ectr_en_s:1;
+ uint32_t ectr_en_h:1;
+ uint32_t thresh_en_s:1;
+ uint32_t thresh_en_h:1;
+ uint32_t continuous_s:1;
+ uint32_t continuous_h:1;
+ uint32_t reserved:4;
+ uint32_t valid_s:1;
+ uint32_t alert_s:1;
+ uint32_t valid_h:1;
+ uint32_t alert_h:1;
+ uint32_t interval:16;
+#else
+ uint32_t interval:16;
+ uint32_t alert_h:1;
+ uint32_t valid_h:1;
+ uint32_t alert_s:1;
+ uint32_t valid_s:1;
+ uint32_t reserved:4;
+ uint32_t continuous_h:1;
+ uint32_t continuous_s:1;
+ uint32_t thresh_en_h:1;
+ uint32_t thresh_en_s:1;
+ uint32_t ectr_en_h:1;
+ uint32_t ectr_en_s:1;
+ uint32_t ro_en_h:1;
+ uint32_t ro_en_s:1;
+#endif
+ } Bits;
+ uint32_t Reg32;
+} BPCM_AVS_ROSC_CONTROL_REG;
+
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t thresh_lo:16;
+ uint32_t thresh_hi:16;
+#else
+ uint32_t thresh_hi:16;
+ uint32_t thresh_lo:16;
+#endif
+ } Bits;
+ uint32_t Reg32;
+} BPCM_AVS_ROSC_THRESHOLD;
+
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t count_s:16;
+ uint32_t count_h:16;
+#else
+ uint32_t count_h:16;
+ uint32_t count_s:16;
+#endif
+ } Bits;
+ uint32_t Reg32;
+} BPCM_AVS_ROSC_COUNT;
+
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t pwd_en:1;
+ uint32_t pwd_alert_sel:1;
+ uint32_t start:6;
+ uint32_t pwd_tm_en:1;
+ uint32_t reserved2:6;
+ uint32_t alert:1;
+ uint32_t ccfg:8;
+ uint32_t rsel:3;
+ uint32_t clr_cfg:3;
+ uint32_t reserved1:2;
+#else
+ uint32_t reserved1:2;
+ uint32_t clr_cfg:3;
+ uint32_t rsel:3;
+ uint32_t ccfg:8;
+ uint32_t alert:1;
+ uint32_t reserved2:6;
+ uint32_t pwd_tm_en:1;
+ uint32_t start:6;
+ uint32_t pwd_alert_sel:1;
+ uint32_t pwd_en:1;
+#endif
+ } Bits;
+ uint32_t Reg32;
+} BPCM_AVS_PWD_CONTROL;
+
+typedef union {
+ struct {
+ uint32_t tbd:32;
+ } Bits;
+ uint32_t Reg32;
+} BPCM_PWD_ACCUM_CONTROL;
+
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t sr:8;
+ uint32_t gp:24;
+#else
+ uint32_t gp:24;
+ uint32_t sr:8;
+#endif
+ } Bits;
+#if IS_BCMCHIP(6858)
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t wan_main_rst_n:1;
+ uint32_t wan_top_bb_rst_n:1;
+ uint32_t epon_core_rst_n:1;
+ uint32_t epon_rx_rclk16_sw_reset_n:1;
+ uint32_t epon_rx_rbc125_sw_reset_n:1;
+ uint32_t epon_tx_tclk16_sw_reset_n:1;
+ uint32_t epon_tx_clk125_sw_reset_n:1;
+ uint32_t gpon_main_rst_n:1;
+ uint32_t gpon_rx_rst_n:1;
+ uint32_t gpon_tx_rst_n:1;
+ uint32_t gpon_8khz_rst_n:1;
+ uint32_t ngpon_main_rst_n:1;
+ uint32_t ngpon_rx_rst_n:1;
+ uint32_t ngpon_tx_rst_n:1;
+ uint32_t ngpon_8khz_rst_n:1;
+ uint32_t gpon_nco_rst_n:1;
+ uint32_t apm_rst_n:1;
+ uint32_t reserved:15;
+#else
+ uint32_t reserved:15;
+ uint32_t apm_rst_n:1;
+ uint32_t gpon_nco_rst_n:1;
+ uint32_t ngpon_8khz_rst_n:1;
+ uint32_t ngpon_tx_rst_n:1;
+ uint32_t ngpon_rx_rst_n:1;
+ uint32_t ngpon_main_rst_n:1;
+ uint32_t gpon_8khz_rst_n:1;
+ uint32_t gpon_tx_rst_n:1;
+ uint32_t gpon_rx_rst_n:1;
+ uint32_t gpon_main_rst_n:1;
+ uint32_t epon_tx_clk125_sw_reset_n:1;
+ uint32_t epon_tx_tclk16_sw_reset_n:1;
+ uint32_t epon_rx_rbc125_sw_reset_n:1;
+ uint32_t epon_rx_rclk16_sw_reset_n:1;
+ uint32_t epon_core_rst_n:1;
+ uint32_t wan_top_bb_rst_n:1;
+ uint32_t wan_main_rst_n:1;
+#endif
+ } Bits_Wantop;
+#endif
+#if IS_BCMCHIP(63158)
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t wan_main_rst_n:1;
+ uint32_t wan_top_bb_rst_n:1;
+ uint32_t rbus_rst_n:1;
+ uint32_t reserved1:2;
+ uint32_t core_soft_rst_n:1;
+ uint32_t i_zn_sw_init:1;
+ uint32_t reserved2:1;
+ uint32_t epon_main_rst_n:1;
+ uint32_t epon_rx_rst_n:1;
+ uint32_t epon_tx_rst_n:1;
+ uint32_t epon_core_rst_n:1;
+ uint32_t ae_rx_rclk16_sw_reset_n:1;
+ uint32_t ae_rx_rbc125_sw_reset_n:1; /* for B0 */
+ uint32_t ae_tx_tclk16_sw_reset_n:1; /* for B0 */
+ uint32_t ae_tx_clk125_sw_reset_n:1;
+ uint32_t gpon_main_rst_n:1;
+ uint32_t gpon_rx_rst_n:1;
+ uint32_t gpon_tx_rst_n:1;
+ uint32_t gpon_8khz_rst_n:1;
+ uint32_t ngpon_main_rst_n:1;
+ uint32_t ngpon_rx_rst_n:1;
+ uint32_t ngpon_tx_rst_n:1;
+ uint32_t ngpon_8khz_rst_n:1;
+ uint32_t reserved3:2;
+ uint32_t gpon_nco_rst_n:1;
+ uint32_t epon_rx_rclk16_sw_reset_n:1; /* for B0 */
+ uint32_t epon_rx_rbc125_sw_reset_n:1; /* for B0 */
+ uint32_t epon_tx_tclk16_sw_reset_n:1; /* for B0 */
+ uint32_t epon_tx_clk125_sw_reset_n:1; /* for B0 */
+ uint32_t reserved4:1;
+#else
+ uint32_t reserved4:1;
+ uint32_t epon_tx_clk125_sw_reset_n:1; /* for B0 */
+ uint32_t epon_tx_tclk16_sw_reset_n:1; /* for B0 */
+ uint32_t epon_rx_rbc125_sw_reset_n:1; /* for B0 */
+ uint32_t epon_rx_rclk16_sw_reset_n:1; /* for B0 */
+ uint32_t gpon_nco_rst_n:1;
+ uint32_t reserved3:2;
+ uint32_t ngpon_8khz_rst_n:1;
+ uint32_t ngpon_tx_rst_n:1;
+ uint32_t ngpon_rx_rst_n:1;
+ uint32_t ngpon_main_rst_n:1;
+ uint32_t gpon_8khz_rst_n:1;
+ uint32_t gpon_tx_rst_n:1;
+ uint32_t gpon_rx_rst_n:1;
+ uint32_t gpon_main_rst_n:1;
+ uint32_t ae_tx_clk125_sw_reset_n:1;
+ uint32_t ae_tx_tclk16_sw_reset_n:1; /* for B0 */
+ uint32_t ae_rx_rbc125_sw_reset_n:1; /* for B0 */
+ uint32_t ae_rx_rclk16_sw_reset_n:1;
+ uint32_t epon_core_rst_n:1;
+ uint32_t epon_tx_rst_n:1;
+ uint32_t epon_rx_rst_n:1;
+ uint32_t epon_main_rst_n:1;
+ uint32_t reserved2:1;
+ uint32_t i_zn_sw_init:1;
+ uint32_t core_soft_rst_n:1;
+ uint32_t reserved1:2;
+ uint32_t rbus_rst_n:1;
+ uint32_t wan_top_bb_rst_n:1;
+ uint32_t wan_main_rst_n:1;
+#endif
+ } Bits_Wantop;
+#endif
+#if IS_BCMCHIP(63158) || IS_BCMCHIP(63178)
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t vdsl_bpcm_early_reset:1;
+ uint32_t vdsl_bpcm_reset:1;
+ uint32_t mips_ubus_soft_reset_bpcm_reset:1;
+ uint32_t qproc_1_bpcm_reset:1;
+ uint32_t qproc_2_bpcm_reset:1;
+ uint32_t sar_bpcm_soft_reset:1;
+ uint32_t vdsl_ubus_soft_bpcm_reset:1;
+ uint32_t reserved1:1;
+ uint32_t gp:24;
+#else
+ uint32_t gp:24;
+ uint32_t reserved1:1;
+ uint32_t vdsl_ubus_soft_bpcm_reset:1;
+ uint32_t sar_bpcm_soft_reset:1;
+ uint32_t qproc_2_bpcm_reset:1;
+ uint32_t qproc_1_bpcm_reset:1;
+ uint32_t mips_ubus_soft_reset_bpcm_reset:1;
+ uint32_t vdsl_bpcm_reset:1;
+ uint32_t vdsl_bpcm_early_reset:1;
+#endif
+ } Bits_vdsl;
+#endif
+ uint32_t Reg32;
+} BPCM_SR_CONTROL;
+
+typedef union{
+ struct {
+ uint32_t tbd:32;
+ } Bits;
+ uint32_t Reg32;
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t vdsl_arm_por_reset_n:1;
+ uint32_t vdsl_arm_reset_n:1;
+ uint32_t vdsl_arm_debug_reset_n:1;
+ uint32_t vdsl_arm_l2_reset_n:1;
+ uint32_t vdsl_arm_cdbgrstreq_en:1;
+ uint32_t vdsl_arm_niden_a7_b0:1;
+ uint32_t vdsl_arm_spniden_a7_b0:1;
+ uint32_t vdsl_arm_nsocdbgreset_a7:1;
+ uint32_t axi4_ubus4_pass_through_disable:1;
+ uint32_t vdsl_arm_dbgen_a7_b0:1;
+ uint32_t vdsl_arm_spiden_a7_b0:1;
+ uint32_t vdsl_arm_scratch_reg:21;
+#else
+ uint32_t vdsl_arm_scratch_reg:21;
+ uint32_t vdsl_arm_spiden_a7_b0:1;
+ uint32_t vdsl_arm_dbgen_a7_b0:1;
+ uint32_t axi4_ubus4_pass_through_disable:1;
+ uint32_t vdsl_arm_nsocdbgreset_a7:1;
+ uint32_t vdsl_arm_spniden_a7_b0:1;
+ uint32_t vdsl_arm_niden_a7_b0:1;
+ uint32_t vdsl_arm_cdbgrstreq_en:1;
+ uint32_t vdsl_arm_l2_reset_n:1;
+ uint32_t vdsl_arm_debug_reset_n:1;
+ uint32_t vdsl_arm_reset_n:1;
+ uint32_t vdsl_arm_por_reset_n:1;
+#endif
+ } Bits_vdsl;
+} BPCM_VDSL_ARM_RST_CTL;
+
+#if IS_BCMCHIP(63138) || IS_BCMCHIP(4908) || IS_BCMCHIP(63158)
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t z2_p_wan_phy_sel:3; /* 0-2 */
+ uint32_t reserved0:1; /* 3 */
+ uint32_t z2_switch_p3_phy_sel:3; /* 4-6 */
+ uint32_t reserved1:1; /* 7 */
+ uint32_t z2_switch_p4_phy_sel:3; /* 8-10 */
+ uint32_t reserved2:1; /* 11 */
+ uint32_t z0_mux_sel:1; /* 12 */
+ uint32_t z1_gphy_mux_sel:1; /* 13 */
+ uint32_t z2_gphy_mux_sel:1; /* 14 */
+ uint32_t z2_crossbar_mux_sel:1; /* 15 */
+ uint32_t reserved3:1; /* 16 */
+ uint32_t z1_pda_en:1; /* 17 */
+ uint32_t z1_ck250_clk_en:1; /* 18 */
+ uint32_t z1_ck25_clk_dis:1; /* 19 */
+ uint32_t reserved4:2; /* 20-21 */
+ uint32_t z2_ck250_clk_en:1; /* 22 */
+ uint32_t z2_ck25_clk_dis:1; /* 23 */
+ uint32_t z2_serdes_clk_en:1; /* 24 */
+ uint32_t z2_serdes_reset_mdioregs:1; /* 25 */
+ uint32_t z2_sedes_reset_pll:1; /* 26 */
+ uint32_t z2_serdes_reset:1; /* 27 */
+ uint32_t z2_serdes_mux_sel:1; /* 28 */
+ uint32_t reserved5:1; /* 29 */
+ uint32_t z1_gphy_reset:1; /* 30 */
+ uint32_t z2_gphy_reset:1; /* 31 */
+#else
+ uint32_t z2_gphy_reset:1; /* 31 */
+ uint32_t z1_gphy_reset:1; /* 30 */
+ uint32_t reserved5:1; /* 29 */
+ uint32_t z2_serdes_mux_sel:1; /* 28 */
+ uint32_t z2_serdes_reset:1; /* 27 */
+ uint32_t z2_sedes_reset_pll:1; /* 26 */
+ uint32_t z2_serdes_reset_mdioregs:1; /* 25 */
+ uint32_t z2_serdes_clk_en:1; /* 24 */
+ uint32_t z2_ck25_clk_dis:1; /* 23 */
+ uint32_t z2_ck250_clk_en:1; /* 22 */
+ uint32_t reserved4:2; /* 20-21 */
+ uint32_t z1_ck25_clk_dis:1; /* 19 */
+ uint32_t z1_ck250_clk_en:1; /* 18 */
+ uint32_t z1_pda_en:1; /* 17 */
+ uint32_t reserved3:1; /* 16 */
+ uint32_t z2_crossbar_mux_sel:1; /* 15 */
+ uint32_t z2_gphy_mux_sel:1; /* 14 */
+ uint32_t z1_gphy_mux_sel:1; /* 13 */
+ uint32_t z0_mux_sel:1; /* 12 */
+ uint32_t reserved2:1; /* 11 */
+ uint32_t z2_switch_p4_phy_sel:3; /* 8-10 */
+ uint32_t reserved1:1; /* 7 */
+ uint32_t z2_switch_p3_phy_sel:3; /* 4-6 */
+ uint32_t reserved0:1; /* 3 */
+ uint32_t z2_p_wan_phy_sel:3; /* 0-2 */
+#endif
+ } Bits;
+ uint32_t Reg32;
+} BPCM_GLOBAL_CNTL;
+
+#elif IS_BCMCHIP(6858) || IS_BCMCHIP(6846) || IS_BCMCHIP(6856) || \
+ IS_BCMCHIP(63178) || IS_BCMCHIP(47622) || IS_BCMCHIP(6878) || \
+ IS_BCMCHIP(63146) || IS_BCMCHIP(6855) || IS_BCMCHIP(4912) || \
+ IS_BCMCHIP(6756)
+
+typedef union {
+ struct {
+ uint32_t tbd:32;
+ } Bits;
+ uint32_t Reg32;
+} BPCM_GLOBAL_CNTL;
+#else
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t z0_mux_sel:1; /* 0 */
+ uint32_t reserved0:4; /* 1-4 */
+ uint32_t z1_gphy_reset:1; /* 5 */
+ uint32_t reserved1:3; /* 6-8 */
+ uint32_t z1_ck25_clk_dis:1; /* 9 */
+ uint32_t z1_ck250_clk_en:1; /* 10 */
+ uint32_t reserved2:1; /* 11 */
+ uint32_t z1_gphy_mux_sel:1; /* 12 */
+ uint32_t z1_pda_en:1; /* 13 */
+ uint32_t reserved3:3; /* 14-16 */
+ uint32_t z2_gphy_reset:1; /* 17 */
+ uint32_t z2_serdes_reset:1; /* 18 */
+ uint32_t z2_serdes_reset_mdioregs:1; /* 19 */
+ uint32_t z2_sedes_reset_pll:1; /* 20 */
+ uint32_t z2_ck250_clk_en:1; /* 21 */
+ uint32_t z2_ck25_clk_dis:1; /* 22 */
+ uint32_t z2_serdes_clk_en:1; /* 23 */
+ uint32_t reserved4:1; /* 24 */
+ uint32_t z2_serdes_mux_sel:1; /* 25 */
+ uint32_t z2_gphy_mux_sel:1; /* 26 */
+ uint32_t z2_crossbar_mux_sel:1; /* 27 */
+ uint32_t z2_p_wan_phy_sel:2; /* 28-29 */
+ uint32_t z2_switch_phy_sel:2; /* 30-31 */
+#else
+ uint32_t z2_switch_phy_sel:2; /* 30-31 */
+ uint32_t z2_p_wan_phy_sel:2; /* 28-29 */
+ uint32_t z2_crossbar_mux_sel:1; /* 27 */
+ uint32_t z2_gphy_mux_sel:1; /* 26 */
+ uint32_t z2_serdes_mux_sel:1; /* 25 */
+ uint32_t reserved4:1; /* 24 */
+ uint32_t z2_serdes_clk_en:1; /* 23 */
+ uint32_t z2_ck25_clk_dis:1; /* 22 */
+ uint32_t z2_ck250_clk_en:1; /* 21 */
+ uint32_t z2_sedes_reset_pll:1; /* 20 */
+ uint32_t z2_serdes_reset_mdioregs:1; /* 19 */
+ uint32_t z2_serdes_reset:1; /* 18 */
+ uint32_t z2_gphy_reset:1; /* 17 */
+ uint32_t reserved3:3; /* 14-16 */
+ uint32_t z1_pda_en:1; /* 13 */
+ uint32_t z1_gphy_mux_sel:1; /* 12 */
+ uint32_t reserved2:1; /* 11 */
+ uint32_t z1_ck250_clk_en:1; /* 10 */
+ uint32_t z1_ck25_clk_dis:1; /* 9 */
+ uint32_t reserved1:3; /* 6-8 */
+ uint32_t z1_gphy_reset:1; /* 5 */
+ uint32_t reserved0:4; /* 1-4 */
+ uint32_t z0_mux_sel:1; /* 0 */
+#endif
+ } Bits;
+ uint32_t Reg32;
+} BPCM_GLOBAL_CNTL;
+#endif
+
+#if IS_BCMCHIP(63158)
+typedef union {
+ struct {
+
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t z0_mux_sel:1; // = r_Z0_GLOBAL_CNTL[0];
+ uint32_t reserverd_1:1; // unused
+ uint32_t z3_pda_en:1; // = r_Z0_GLOBAL_CNTL[2];
+ uint32_t rx_sys_clk_en:1; // = r_Z0_GLOBAL_CNTL[3];
+ uint32_t tx_sys_clk_en:1; // = r_Z0_GLOBAL_CNTL[4];
+ uint32_t gmii_rx_clk_en:1; // = r_Z0_GLOBAL_CNTL[5];
+ uint32_t gmii_tx_clk_en:1; // = r_Z0_GLOBAL_CNTL[6];
+ uint32_t rsrvd:25;
+#else
+ uint32_t rsrvd:25;
+ uint32_t gmii_tx_clk_en:1; // = r_Z0_GLOBAL_CNTL[6];
+ uint32_t gmii_rx_clk_en:1; // = r_Z0_GLOBAL_CNTL[5];
+ uint32_t tx_sys_clk_en:1; // = r_Z0_GLOBAL_CNTL[4];
+ uint32_t rx_sys_clk_en:1; // = r_Z0_GLOBAL_CNTL[3];
+ uint32_t z3_pda_en:1; // = r_Z0_GLOBAL_CNTL[2];
+ uint32_t reserverd_1:1; // unused
+ uint32_t z0_mux_sel:1; // = r_Z0_GLOBAL_CNTL[0];
+#endif
+
+ } Bits;
+ uint32_t Reg32;
+
+} BPCM_GLOBAL_CNTL_0;
+
+typedef union {
+ struct {
+
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t z1_pda_en:1; //= r_Z1_GLOBAL_CNTL[0];
+ uint32_t reserved:2;
+ uint32_t z1_ck250_clk_en:1; //= r_Z1_GLOBAL_CNTL[3];
+ uint32_t z1_ref_clk_dis:1; //= r_Z1_GLOBAL_CNTL[4];
+ uint32_t z1_mux_sel:1; //= r_Z1_GLOBAL_CNTL[5];
+ uint32_t z1_gphy_reset:1; //= r_Z1_GLOBAL_CNTL[6];
+ uint32_t z1_gphy_iddq_global_pwr:1; //= r_Z1_GLOBAL_CNTL[7];
+ uint32_t z1_gphy_force_dll_en:1; //= r_Z1_GLOBAL_CNTL[8];
+ uint32_t z1_gphy_ext_pwr_down:4; //= r_Z1_GLOBAL_CNTL[12:9];
+ uint32_t z1_gphy_iddq_bias:1; //= r_Z1_GLOBAL_CNTL[13];
+ uint32_t z1_switch_p3_phy_sel:1; //= r_Z1_GLOBAL_CNTL[14];
+ uint32_t z1_switch_p8_sel:1; //= r_Z1_GLOBAL_CNTL[15];
+ uint32_t rsrvd:16;
+#else
+ uint32_t rsrvd:16;
+ uint32_t z1_switch_p8_sel:1; //= r_Z1_GLOBAL_CNTL[15];
+ uint32_t z1_switch_p3_phy_sel:1; //= r_Z1_GLOBAL_CNTL[14];
+ uint32_t z1_gphy_iddq_bias:1; //= r_Z1_GLOBAL_CNTL[13];
+ uint32_t z1_gphy_ext_pwr_down:4; //= r_Z1_GLOBAL_CNTL[12:9];
+ uint32_t z1_gphy_force_dll_en:1; //= r_Z1_GLOBAL_CNTL[8];
+ uint32_t z1_gphy_iddq_global_pwr:1; //= r_Z1_GLOBAL_CNTL[7];
+ uint32_t z1_gphy_reset:1; //= r_Z1_GLOBAL_CNTL[6];
+ uint32_t z1_mux_sel:1; //= r_Z1_GLOBAL_CNTL[5];
+ uint32_t z1_ref_clk_dis:1; //= r_Z1_GLOBAL_CNTL[4];
+ uint32_t z1_ck250_clk_en:1; //= r_Z1_GLOBAL_CNTL[3];
+ uint32_t reserved:2;
+ uint32_t z1_pda_en:1; //= r_Z1_GLOBAL_CNTL[0];
+#endif
+
+ } Bits;
+ uint32_t Reg32;
+
+} BPCM_GLOBAL_CNTL_1;
+
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t z2_pda_en:1; //= r_Z2_GLOBAL_CNTL[0];
+ uint32_t reserved:1;
+ uint32_t z2_ck250_clk_en:1; //= r_Z2_GLOBAL_CNTL[2];
+ uint32_t z2_ref_clk_dis:1; //= r_Z2_GLOBAL_CNTL[3];
+ uint32_t z2_serdes_clk_en:1; //= r_Z2_GLOBAL_CNTL[4];
+ uint32_t z2_gphy_mux_sel:1; //= r_Z2_GLOBAL_CNTL[5];
+ uint32_t z2_gphy_reset:1; //= r_Z2_GLOBAL_CNTL[6];
+ uint32_t z2_gphy_iddq_global_pwr:1; //= r_Z2_GLOBAL_CNTL[7];
+ uint32_t z2_gphy_force_dll_en:1; //= r_Z2_GLOBAL_CNTL[8];
+ uint32_t z2_gphy_ext_pwr_down:1; //= r_Z2_GLOBAL_CNTL[9];
+ uint32_t z2_gphy_iddq_bias:1; //= r_Z2_GLOBAL_CNTL[10];
+ uint32_t z2_crossbar_mux_sel:1; //= r_Z2_GLOBAL_CNTL[11];
+ uint32_t z2_p_wan_phy_sel:2; //= r_Z2_GLOBAL_CNTL[13:12];
+ uint32_t z2_switch_p4_phy_sel:2; //= r_Z2_GLOBAL_CNTL[15:14];
+ uint32_t z2_switch_p6_phy_sel:2; //= r_Z2_GLOBAL_CNTL[17:16];
+ uint32_t z2_serdes_mux_sel:1; //= r_Z2_GLOBAL_CNTL[18];
+ uint32_t z2_serdes_iddq:1; //= r_Z2_GLOBAL_CNTL[19];
+ uint32_t z2_serdes_pwrdwn:1; //= r_Z2_GLOBAL_CNTL[20];
+ uint32_t z2_serdes_reset:1; //= r_Z2_GLOBAL_CNTL[21];
+ uint32_t z2_serdes_reset_mdioregs:1; //= r_Z2_GLOBAL_CNTL[22];
+ uint32_t z2_serdes_reset_pll:1; //= r_Z2_GLOBAL_CNTL[23];
+ uint32_t z2_serdes_refclk_sel:3; //= r_Z2_GLOBAL_CNTL[26:24];
+ uint32_t z2_pll_clk125_250_sel:1; //= r_Z2_GLOBAL_CNTL[27];
+ uint32_t z2_pll_mux_clk250_sel:1; //= r_Z2_GLOBAL_CNTL[28];
+ uint32_t rsrvd:3;
+#else
+ uint32_t rsrvd:3;
+ uint32_t z2_pll_mux_clk250_sel:1; //= r_Z2_GLOBAL_CNTL[28];
+ uint32_t z2_pll_clk125_250_sel:1; //= r_Z2_GLOBAL_CNTL[27];
+ uint32_t z2_serdes_refclk_sel:3; //= r_Z2_GLOBAL_CNTL[26:24];
+ uint32_t z2_serdes_reset_pll:1; //= r_Z2_GLOBAL_CNTL[23];
+ uint32_t z2_serdes_reset_mdioregs:1; //= r_Z2_GLOBAL_CNTL[22];
+ uint32_t z2_serdes_reset:1; //= r_Z2_GLOBAL_CNTL[21];
+ uint32_t z2_serdes_pwrdwn:1; //= r_Z2_GLOBAL_CNTL[20];
+ uint32_t z2_serdes_iddq:1; //= r_Z2_GLOBAL_CNTL[19];
+ uint32_t z2_serdes_mux_sel:1; //= r_Z2_GLOBAL_CNTL[18];
+ uint32_t z2_switch_p6_phy_sel:2; //= r_Z2_GLOBAL_CNTL[17:16];
+ uint32_t z2_switch_p4_phy_sel:2; //= r_Z2_GLOBAL_CNTL[15:14];
+ uint32_t z2_p_wan_phy_sel:2; //= r_Z2_GLOBAL_CNTL[13:12];
+ uint32_t z2_crossbar_mux_sel:1; //= r_Z2_GLOBAL_CNTL[11];
+ uint32_t z2_gphy_iddq_bias:1; //= r_Z2_GLOBAL_CNTL[10];
+ uint32_t z2_gphy_ext_pwr_down:1; //= r_Z2_GLOBAL_CNTL[9];
+ uint32_t z2_gphy_force_dll_en:1; //= r_Z2_GLOBAL_CNTL[8];
+ uint32_t z2_gphy_iddq_global_pwr:1; //= r_Z2_GLOBAL_CNTL[7];
+ uint32_t z2_gphy_reset:1; //= r_Z2_GLOBAL_CNTL[6];
+ uint32_t z2_gphy_mux_sel:1; //= r_Z2_GLOBAL_CNTL[5];
+ uint32_t z2_serdes_clk_en:1; //= r_Z2_GLOBAL_CNTL[4];
+ uint32_t z2_ref_clk_dis:1; //= r_Z2_GLOBAL_CNTL[3];
+ uint32_t z2_ck250_clk_en:1; //= r_Z2_GLOBAL_CNTL[2];
+ uint32_t reserved:1;
+ uint32_t z2_pda_en:1; //= r_Z2_GLOBAL_CNTL[0];
+#endif
+
+ } Bits;
+ uint32_t Reg32;
+
+} BPCM_GLOBAL_CNTL_2;
+#endif
+
+typedef union {
+ struct {
+ uint32_t ctl;
+ } Bits_sata_gp;
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t iddq_bias:1; /* 0 */
+ uint32_t ext_pwr_down:4; /* 1-4 */
+ uint32_t force_dll_en:1; /* 5 */
+ uint32_t iddq_global_pwr:1; /* 6 */
+ uint32_t reserved:25;
+#else
+ uint32_t reserved:25;
+ uint32_t iddq_global_pwr:1; /* 6 */
+ uint32_t force_dll_en:1; /* 5 */
+ uint32_t ext_pwr_down:4; /* 1-4 */
+ uint32_t iddq_bias:1; /* 0 */
+#endif
+ } Bits_switch_z1_qgphy;
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t iddq_bias:1; /* 0 */
+ uint32_t ext_pwr_down:1; /* 1 */
+ uint32_t force_dll_en:1; /* 2 */
+ uint32_t iddq_global_pwd:1; /* 3 */
+ uint32_t ck25_dis:1; /* 4 */
+ uint32_t phy_reset:1; /* 5 */
+ uint32_t reserved0:2;
+ uint32_t phy_ad:5; /* 8-12 */
+ uint32_t reserved1:18;
+ uint32_t ctrl_en:1; /* 31 */
+#else
+ uint32_t ctrl_en:1; /* 31 */
+ uint32_t reserved1:18;
+ uint32_t phy_ad:5; /* 8-12 */
+ uint32_t reserved0:2;
+ uint32_t phy_reset:1; /* 5 */
+ uint32_t ck25_dis:1; /* 4 */
+ uint32_t iddq_global_pwd:1; /* 3 */
+ uint32_t force_dll_en:1; /* 2 */
+ uint32_t ext_pwr_down:1; /* 1 */
+ uint32_t iddq_bias:1; /* 0 */
+#endif
+ } Bits_egphy_1port;
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t iddq_bias:1; /* 0 */
+ uint32_t ext_pwr_down:4; /* 1-4 */
+ uint32_t force_dll_en:1; /* 5 */
+ uint32_t iddq_global_pwd:1; /* 6 */
+ uint32_t ck25_dis:1; /* 7 */
+ uint32_t phy_reset:1; /* 8 */
+ uint32_t reserved0:3;
+ uint32_t phy_ad:5; /* 12-16 */
+ uint32_t reserved1:14;
+ uint32_t ctrl_en:1; /* 31 */
+#else
+ uint32_t ctrl_en:1; /* 31 */
+ uint32_t reserved1:14;
+ uint32_t phy_ad:5; /* 12-16 */
+ uint32_t reserved0:3;
+ uint32_t phy_reset:1; /* 8 */
+ uint32_t ck25_dis:1; /* 7 */
+ uint32_t iddq_global_pwd:1; /* 6 */
+ uint32_t force_dll_en:1; /* 5 */
+ uint32_t ext_pwr_down:4; /* 1-4 */
+ uint32_t iddq_bias:1; /* 0 */
+#endif
+ } Bits_egphy_4port;
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t iddq_bias:1; /* 0 */
+ uint32_t ext_pwr_down:4; /* 1-4 */
+ uint32_t force_dll_en:1; /* 5 */
+ uint32_t iddq_global_pwr:1; /* 6 */
+ uint32_t reserved0:25; /* 7-31 */
+#else
+ uint32_t reserved0:25; /* 7-31 */
+ uint32_t iddq_global_pwr:1; /* 6 */
+ uint32_t force_dll_en:1; /* 5 */
+ uint32_t ext_pwr_down:4; /* 1-4 */
+ uint32_t iddq_bias:1; /* 0 */
+#endif
+ } Bits_qgphy_cntl;
+ struct {
+ uint32_t ctl;
+ } Bits_vdsl_phy;
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t alt_bfc_vector:12; /* 00-11 */
+ uint32_t reserved0:3;
+ uint32_t alt_bfc_en:1; /* 15 */
+ uint32_t reset_dly_cfg:2; /* 16-17 */
+ uint32_t reserved1:8;
+ uint32_t ext_mclk_en_reset:1; /* 26 */
+ uint32_t ext_mclk_en:1; /* 27 */
+ uint32_t por_reset_n_ctl:1; /* 28 */
+ uint32_t reset_n_ctl:1; /* 29 */
+ uint32_t reserved2:1;
+ uint32_t clken:1; /* 31 */
+#else
+ uint32_t clken:1; /* 31 */
+ uint32_t reserved2:1;
+ uint32_t reset_n_ctl:1; /* 29 */
+ uint32_t por_reset_n_ctl:1; /* 28 */
+ uint32_t ext_mclk_en:1; /* 27 */
+ uint32_t ext_mclk_en_reset:1; /* 26 */
+ uint32_t reserved1:8;
+ uint32_t reset_dly_cfg:2; /* 16-17 */
+ uint32_t alt_bfc_en:1; /* 15 */
+ uint32_t reserved0:3;
+ uint32_t alt_bfc_vector:12; /* 00-11 */
+#endif
+ } Bits_vdsl_mips;
+ uint32_t Reg32;
+} BPCM_MISC_CONTROL;
+
+typedef union {
+ struct {
+ uint32_t field;
+ } Bits_qgphy_status;
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t alt_bfc_vector:12; /* 00-11 */
+ uint32_t reserved0:3;
+ uint32_t alt_bfc_en:1; /* 15 */
+ uint32_t reset_dly_cfg:2; /* 16-17 */
+ uint32_t reserved1:8;
+ uint32_t ext_mclk_en_reset:1; /* 26 */
+ uint32_t ext_mclk_en:1; /* 27 */
+ uint32_t por_reset_n_ctl:1; /* 28 */
+ uint32_t reset_n_ctl:1; /* 29 */
+ uint32_t reserved2:1;
+ uint32_t clken:1; /* 31 */
+#else
+ uint32_t clken:1; /* 31 */
+ uint32_t reserved2:1;
+ uint32_t reset_n_ctl:1; /* 29 */
+ uint32_t por_reset_n_ctl:1; /* 28 */
+ uint32_t ext_mclk_en:1; /* 27 */
+ uint32_t ext_mclk_en_reset:1; /* 26 */
+ uint32_t reserved1:8;
+ uint32_t reset_dly_cfg:2; /* 16-17 */
+ uint32_t alt_bfc_en:1; /* 15 */
+ uint32_t reserved0:3;
+ uint32_t alt_bfc_vector:12; /* 00-11 */
+#endif
+ } Bits_vdsl_mips; /* second PHY MIPS core */
+ uint32_t Reg32;
+} BPCM_MISC_CONTROL2;
+
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t gphy_iddq_bias:1; /* 00 */
+ uint32_t gphy_ext_pwr_down:1; /* 01 */
+ uint32_t gphy_force_dll_en:1; /* 02 */
+ uint32_t gphy_iddq_global_pwr:1; /* 03 */
+ uint32_t serdes_iddq:1; /* 04 */
+ uint32_t serdes_pwrdwn:1; /* 05 */
+ uint32_t reserved0:2; /* 07:06 */
+ uint32_t serdes_refclk_sel:3; /* 10:08 */
+ uint32_t reserved1:5; /* 15:11 */
+ uint32_t pll_clk125_250_sel:1; /* 16 */
+ uint32_t pll_mux_clk_250_sel:1; /* 17 */
+ uint32_t reserved2:14; /* 31:18 */
+#else
+ uint32_t reserved2:14; /* 31:18 */
+ uint32_t pll_mux_clk_250_sel:1; /* 17 */
+ uint32_t pll_clk125_250_sel:1; /* 16 */
+ uint32_t reserved1:5; /* 15:11 */
+ uint32_t serdes_refclk_sel:3; /* 10:08 */
+ uint32_t reserved0:2; /* 07:06 */
+ uint32_t serdes_pwrdwn:1; /* 05 */
+ uint32_t serdes_iddq:1; /* 04 */
+ uint32_t gphy_iddq_global_pwr:1; /* 03 */
+ uint32_t gphy_force_dll_en:1; /* 02 */
+ uint32_t gphy_ext_pwr_down:1; /* 01 */
+ uint32_t gphy_iddq_bias:1; /* 00 */
+#endif
+ } Bits;
+ uint32_t Reg32;
+} BPCM_SGPHY_CNTL;
+
+typedef union {
+ struct {
+ uint32_t field;
+ } Bits;
+ uint32_t Reg32;
+} BPCM_SGPHY_STATUS;
+
+typedef union {
+ struct {
+#if IS_BCMCHIP(63138)
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t core_pwr_ctrl:2; // 01:00 R/W
+ uint32_t reserved2:6; // 07:02 R/W
+ uint32_t pll_pwr_on:1; // 08:08 R/W
+ uint32_t pll_ldo_pwr_on:1; // 09:09 R/W
+ uint32_t pll_clamp_on:1; // 10:10 R/W
+ uint32_t reserved1:2; // 12:11 R/O
+ uint32_t cpu0_reset_n:1; // 13:13 R/W
+ uint32_t cpu1_reset_n:1; // 14:14 R/W
+ uint32_t neon_reset_n:1; // 15:15 R/W
+ uint32_t reserved0:12; // 27:16 R/O
+ uint32_t pwr_ctrl_sts:2; // 29:28 R/O
+ uint32_t power_down:2; // 31:30 R/O
+#else
+ uint32_t power_down:2; // 31:30 R/O
+ uint32_t pwr_ctrl_sts:2; // 29:28 R/O
+ uint32_t reserved0:12; // 27:16 R/O
+ uint32_t neon_reset_n:1; // 15:15 R/W
+ uint32_t cpu1_reset_n:1; // 14:14 R/W
+ uint32_t cpu0_reset_n:1; // 13:13 R/W
+ uint32_t reserved1:2; // 12:11 R/O
+ uint32_t pll_clamp_on:1; // 10:10 R/W
+ uint32_t pll_ldo_pwr_on:1; // 09:09 R/W
+ uint32_t pll_pwr_on:1; // 08:08 R/W
+ uint32_t reserved2:6; // 07:02 R/W
+ uint32_t core_pwr_ctrl:2; // 01:00 R/W
+#endif
+#elif IS_BCMCHIP(63148)
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t cpu0_reset_n:1; // 00:00 R/W
+ uint32_t power_down:1; // 01:01 R/W
+ uint32_t reserved:30; // 31:02 R/O
+#else
+ uint32_t reserved:30; // 31:02 R/O
+ uint32_t power_down:1; // 01:01 R/W
+ uint32_t cpu0_reset_n:1; // 00:00 R/W
+#endif
+#elif IS_BCMCHIP(6858) || IS_BCMCHIP(63158) || IS_BCMCHIP(6846) || \
+ IS_BCMCHIP(6856) || IS_BCMCHIP(63178) || IS_BCMCHIP(47622) || \
+ IS_BCMCHIP(6878) || IS_BCMCHIP(63146) || IS_BCMCHIP(4912) || \
+ IS_BCMCHIP(6855) || IS_BCMCHIP(6756)
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t cpu_reset_n:8; // 07:00 R/W
+ uint32_t c0l2_reset:1; // 08:08 R/W
+ uint32_t c1l2_reset:1; // 09:09 R/W
+ uint32_t reserved0:6; // 15:10 R/O
+ uint32_t cpu_bpcm_init_on:8; // 23:16 R/W
+ uint32_t c0l2_bpcm_init_on:1; // 24:24 R/W
+ uint32_t c1l2_bpcm_init_on:1; // 25:25 R/W
+ uint32_t ubus_sr:1; // 26:26 R/W
+ uint32_t cci_sr:1; // 27:27 R/W
+ uint32_t webcores_sr:1; // 28:28 R/W
+ uint32_t hw_done:1; // 29:29 R/O
+ uint32_t sw_done:1; // 30:30 R/W
+ uint32_t start:1; // 31:31 R/W
+#else
+ uint32_t start:1; // 31:31 R/W
+ uint32_t sw_done:1; // 30:30 R/W
+ uint32_t hw_done:1; // 29:29 R/O
+ uint32_t webcores_sr:1; // 28:28 R/W
+ uint32_t cci_sr:1; // 27:27 R/W
+ uint32_t ubus_sr:1; // 26:26 R/W
+ uint32_t c1l2_bpcm_init_on:1; // 25:25 R/W
+ uint32_t c0l2_bpcm_init_on:1; // 24:24 R/W
+ uint32_t cpu_bpcm_init_on:8; // 23:16 R/W
+ uint32_t reserved0:6; // 15:10 R/O
+ uint32_t c1l2_reset:1; // 09:09 R/W
+ uint32_t c0l2_reset:1; // 08:08 R/W
+ uint32_t cpu_reset_n:8; // 07:00 R/W
+#endif
+#endif
+ } Bits;
+ uint32_t Reg32;
+} ARM_CONTROL_REG;
+
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t mem_pwr_ok:1; // 00:00 R/W
+ uint32_t mem_pwr_on:1; // 01:01 R/W
+ uint32_t mem_clamp_on:1; // 02:02 R/W
+ uint32_t reserved2:1; // 03:03 R/W
+ uint32_t mem_pwr_ok_status:1; // 04:04 R/O
+ uint32_t mem_pwr_on_status:1; // 05:05 R/O
+ uint32_t reserved1:2; // 07:06 R/W
+ uint32_t mem_pda:4; // 11:08 R/W only LS bit for CPU0/1, all four bits for neon_l2
+ uint32_t reserved0:3; // 14:12 R/W
+ uint32_t clamp_on:1; // 15:15 R/W
+ uint32_t pwr_ok:4; // 19:16 R/W ditto
+ uint32_t pwr_on:4; // 23:20 R/W ditto
+ uint32_t pwr_ok_status:4; // 27:24 R/O ditto
+ uint32_t pwr_on_status:4; // 31:28 R/O only LS 2-bits for CPU1, only LS 1 bit for neon_l2
+#else
+ uint32_t pwr_on_status:4; // 31:28 R/O only LS 2-bits for CPU1, only LS 1 bit for neon_l2
+ uint32_t pwr_ok_status:4; // 27:24 R/O ditto
+ uint32_t pwr_on:4; // 23:20 R/W ditto
+ uint32_t pwr_ok:4; // 19:16 R/W ditto
+ uint32_t clamp_on:1; // 15:15 R/W
+ uint32_t reserved0:3; // 14:12 R/W
+ uint32_t mem_pda:4; // 11:08 R/W only LS bit for CPU0/1, all four bits for neon_l2
+ uint32_t reserved1:2; // 07:06 R/W
+ uint32_t mem_pwr_on_status:1; // 05:05 R/O
+ uint32_t mem_pwr_ok_status:1; // 04:04 R/O
+ uint32_t reserved2:1; // 03:03 R/W
+ uint32_t mem_clamp_on:1; // 02:02 R/W
+ uint32_t mem_pwr_on:1; // 01:01 R/W
+ uint32_t mem_pwr_ok:1; // 00:00 R/W
+#endif
+ } Bits;
+ uint32_t Reg32;
+} ARM_CPUx_PWR_CTRL_REG;
+
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t resetb:1; // 00:00
+ uint32_t post_resetb:1; // 01:01
+ uint32_t pwrdwn:1; // 02:02
+ uint32_t master_reset:1; // 03:03
+ uint32_t pwrdwn_ldo:1; // 04:04
+ uint32_t iso:1; // 05:05 // only used in afepll
+ uint32_t reserved0:2; // 07:06
+ uint32_t ldo_ctrl:6; // 13:08
+ uint32_t reserved1:1; // 14:14
+ uint32_t hold_ch_all:1; // 15:15
+ uint32_t reserved2:4; // 16:19
+ uint32_t byp_wait:1; // 20:20 // only used in b15pll
+ uint32_t reserved3:11; // 21:31
+#else
+ uint32_t reserved3:11; // 21:31
+ uint32_t byp_wait:1; // 20:20 // only used in b15pll
+ uint32_t reserved2:4; // 16:19
+ uint32_t hold_ch_all:1; // 15:15
+ uint32_t reserved1:1; // 14:14
+ uint32_t ldo_ctrl:6; // 13:08
+ uint32_t reserved0:2; // 07:06
+ uint32_t iso:1; // 05:05 // only used in afepll
+ uint32_t pwrdwn_ldo:1; // 04:04
+ uint32_t master_reset:1; // 03:03
+ uint32_t pwrdwn:1; // 02:02
+ uint32_t post_resetb:1; // 01:01
+ uint32_t resetb:1; // 00:00
+#endif
+ } Bits;
+ uint32_t Reg32;
+} PLL_CTRL_REG;
+
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t fb_offset:12; // 11:00
+ uint32_t fb_phase_en:1; // 12:12
+ uint32_t _8phase_en:1; // 13:13
+ uint32_t sr:18; // 31:14
+#else
+ uint32_t sr:18; // 31:14
+ uint32_t _8phase_en:1; // 13:13
+ uint32_t fb_phase_en:1; // 12:12
+ uint32_t fb_offset:12; // 11:00
+#endif
+ } Bits;
+ uint32_t Reg32;
+} PLL_PHASE_REG;
+
+#if IS_BCMCHIP(63146) || IS_BCMCHIP(4912)
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t ndiv_int:10; // 09:00
+ uint32_t reserved0:2; // 11:10
+ uint32_t fref_eff_info:8; // 19:12
+ uint32_t auto_cnfg_dsbl:8; // 27:20
+ uint32_t reserved1:3; // 30:28
+ uint32_t ndiv_override:1; // 31
+#else
+ uint32_t ndiv_override:1; // 31
+ uint32_t reserved1:3; // 30:28
+ uint32_t auto_cnfg_dsbl:8; // 27:20
+ uint32_t fref_eff_info:8; // 19:12
+ uint32_t reserved0:2; // 11:10
+ uint32_t ndiv_int:10; // 09:00
+#endif
+ } Bits;
+ uint32_t Reg32;
+} PLL_NDIV_REG;
+
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t pdiv:4; // 03:00
+ uint32_t ndiv_frac:24; // 27:04
+ uint32_t reserved0:3; // 30:28
+ uint32_t ndiv_pdiv_override:1; // 31:31
+#else
+ uint32_t ndiv_pdiv_override:1; // 31:31
+ uint32_t reserved0:3; // 30:28
+ uint32_t ndiv_frac:24; // 27:04
+ uint32_t pdiv:4; // 03:00
+#endif
+ } Bits;
+ uint32_t Reg32;
+} PLL_PDIV_REG;
+
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t mdiv0:9; // 08:00
+ uint32_t enableb_ch0:1; // 09:09
+ uint32_t hold_ch0:1; // 10:10
+ uint32_t mdel0:1; // 11:11
+ uint32_t reserved0:3; // 14:12
+ uint32_t mdiv_override0:1; // 15:15
+ uint32_t mdiv1:9; // 24:16
+ uint32_t enableb_ch1:1; // 25:25
+ uint32_t hold_ch1:1; // 26:26
+ uint32_t mdel1:1; // 27:27
+ uint32_t reserved1:3; // 30:28
+ uint32_t mdiv_override1:1; // 31:31
+#else
+ uint32_t mdiv_override1:1; // 31:31
+ uint32_t reserved1:3; // 30:28
+ uint32_t mdel1:1; // 27:27
+ uint32_t hold_ch1:1; // 26:26
+ uint32_t enableb_ch1:1; // 25:25
+ uint32_t mdiv1:9; // 24:16
+ uint32_t mdiv_override0:1; // 15:15
+ uint32_t reserved0:3; // 14:12
+ uint32_t mdel0:1; // 11:11
+ uint32_t hold_ch0:1; // 10:10
+ uint32_t enableb_ch0:1; // 09:09
+ uint32_t mdiv0:9; // 08:00
+#endif
+ } Bits;
+ uint32_t Reg32;
+} PLL_CHCFG_REG;
+
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t reserved0:8; // 07:00
+ uint32_t stat_select:3; // 10:08
+ uint32_t pq_mode:1; // 11:11
+ uint32_t stat_mode:2; // 13:12
+ uint32_t stat_reset:1; // 14:14
+ uint32_t stat_update:1; // 15:15
+ uint32_t ssc_step:16; // 31:16
+#else
+ uint32_t ssc_step:16; // 31:16
+ uint32_t stat_update:1; // 15:15
+ uint32_t stat_reset:1; // 14:14
+ uint32_t stat_mode:2; // 13:12
+ uint32_t pq_mode:1; // 11:11
+ uint32_t stat_select:3; // 10:08
+ uint32_t reserved0:8; // 07:00
+#endif
+ } Bits;
+ uint32_t Reg32;
+} PLL_LOOP0_REG;
+
+#else
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t ndiv_int:10; // 09:00
+ uint32_t ndiv_frac:20; // 29:10
+ uint32_t reserved0:1; // 30
+ uint32_t ndiv_override:1; // 31
+#else
+ uint32_t ndiv_override:1; // 31
+ uint32_t reserved0:1; // 30
+ uint32_t ndiv_frac:20; // 29:10
+ uint32_t ndiv_int:10; // 09:00
+#endif
+ } Bits;
+ uint32_t Reg32;
+} PLL_NDIV_REG;
+
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t pdiv:3; // 02:00
+ uint32_t reserved0:28; // 30:03
+ uint32_t ndiv_pdiv_override:1; // 31:31
+#else
+ uint32_t ndiv_pdiv_override:1; // 31:31
+ uint32_t reserved0:28; // 30:03
+ uint32_t pdiv:3; // 02:00
+#endif
+ } Bits;
+ uint32_t Reg32;
+} PLL_PDIV_REG;
+
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t mdiv0:8; // 07:00
+ uint32_t enableb_ch0:1; // 08:08
+ uint32_t hold_ch0:1; // 09:09
+ uint32_t load_en_ch0:1; // 10:10
+ uint32_t mdel0:1; // 11:11
+ uint32_t reserved0:3; // 14:12
+ uint32_t mdiv_override0:1; // 15:15
+ uint32_t mdiv1:8; // 23:16
+ uint32_t enableb_ch1:1; // 24:24
+ uint32_t hold_ch1:1; // 25:25
+ uint32_t load_en_ch1:1; // 26:26
+ uint32_t mdel1:1; // 27:27
+ uint32_t reserved1:3; // 30:28
+ uint32_t mdiv_override1:1; // 31:31
+#else
+ uint32_t mdiv_override1:1; // 31:31
+ uint32_t reserved1:3; // 30:28
+ uint32_t mdel1:1; // 27:27
+ uint32_t load_en_ch1:1; // 26:26
+ uint32_t hold_ch1:1; // 25:25
+ uint32_t enableb_ch1:1; // 24:24
+ uint32_t mdiv1:8; // 23:16
+ uint32_t mdiv_override0:1; // 15:15
+ uint32_t reserved0:3; // 14:12
+ uint32_t mdel0:1; // 11:11
+ uint32_t load_en_ch0:1; // 10:10
+ uint32_t hold_ch0:1; // 09:09
+ uint32_t enableb_ch0:1; // 08:08
+ uint32_t mdiv0:8; // 07:00
+#endif
+ } Bits;
+ uint32_t Reg32;
+} PLL_CHCFG_REG;
+
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t reserved0:4; // 03:00
+ uint32_t ka:3; // 06:04
+ uint32_t reserved1:1; // 07:07
+ uint32_t ki:3; // 10:08
+ uint32_t reserved2:1; // 11:11
+ uint32_t kp:4; // 15:12
+ uint32_t ssc_step:16; // 31:16
+#else
+ uint32_t ssc_step:16; // 31:16
+ uint32_t kp:4; // 15:12
+ uint32_t reserved2:1; // 11:11
+ uint32_t ki:3; // 10:08
+ uint32_t reserved1:1; // 07:07
+ uint32_t ka:3; // 06:04
+ uint32_t reserved0:4; // 03:00
+#endif
+ } Bits;
+ uint32_t Reg32;
+} PLL_LOOP0_REG;
+
+#endif
+
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t ssc_limit:22; // 21:00
+ uint32_t reserved0:2; // 23:22
+ uint32_t ssc_clkdiv:4; // 27:24
+ uint32_t ssc_status:1; // 28:28
+ uint32_t reserved1:2; // 30:29
+ uint32_t ssc_mode:1; // 31:31
+#else
+ uint32_t ssc_mode:1; // 31:31
+ uint32_t reserved1:2; // 30:29
+ uint32_t ssc_status:1; // 28:28
+ uint32_t ssc_clkdiv:4; // 27:24
+ uint32_t reserved0:2; // 23:22
+ uint32_t ssc_limit:22; // 21:00
+#endif
+ } Bits;
+ uint32_t Reg32;
+} PLL_LOOP1_REG;
+
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t fdco_ctrl_bypass:16; // 15:00
+ uint32_t fdco_bypass_en:1; // 16:16
+ uint32_t fdco_dac_sel:1; // 17:17
+ uint32_t state_reset:1; // 18:18
+ uint32_t state_mode:2; // 20:19
+ uint32_t state_sel:3; // 23:21
+ uint32_t state_update:1; // 24:24
+ uint32_t dco_en:1; // 25:25
+ uint32_t dco_div2_div4:1; // 26:26
+ uint32_t dco_bias_boost:1; // 27:27
+ uint32_t bb_en:1; // 28:28
+ uint32_t t2d_offset:3; // 31:29
+#else
+ uint32_t t2d_offset:3; // 31:29
+ uint32_t bb_en:1; // 28:28
+ uint32_t dco_bias_boost:1; // 27:27
+ uint32_t dco_div2_div4:1; // 26:26
+ uint32_t dco_en:1; // 25:25
+ uint32_t state_update:1; // 24:24
+ uint32_t state_sel:3; // 23:21
+ uint32_t state_mode:2; // 20:19
+ uint32_t state_reset:1; // 18:18
+ uint32_t fdco_dac_sel:1; // 17:17
+ uint32_t fdco_bypass_en:1; // 16:16
+ uint32_t fdco_ctrl_bypass:16; // 15:00
+#endif
+ } Bits;
+ uint32_t Reg32;
+} PLL_CFG0_REG;
+
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t t2d_offset_msb:1; // 00:00
+ uint32_t t2d_clk_enable:1; // 01:01
+ uint32_t t2d_clk_sel:1; // 02:02
+ uint32_t kpp:4; // 06:03
+ uint32_t pwm_ctrl:2; // 08:07
+ uint32_t port_reset_mode:2; // 10:09
+ uint32_t byp2_en:1; // 11:11
+ uint32_t byp1_en:1; // 12:12
+ uint32_t ref_diff_sel:1; // 13:13
+ uint32_t ki_startlow:1; // 14:14
+ uint32_t en_500ohm:1; // 15:15
+ uint32_t refd2c_bias:3; // 18:16
+ uint32_t post_div2_div3:1; // 19:19
+ uint32_t ki_boost:1; // 20:20
+ uint32_t reserved0:11; // 31:21
+#else
+ uint32_t reserved0:11; // 31:21
+ uint32_t ki_boost:1; // 20:20
+ uint32_t post_div2_div3:1; // 19:19
+ uint32_t refd2c_bias:3; // 18:16
+ uint32_t en_500ohm:1; // 15:15
+ uint32_t ki_startlow:1; // 14:14
+ uint32_t ref_diff_sel:1; // 13:13
+ uint32_t byp1_en:1; // 12:12
+ uint32_t byp2_en:1; // 11:11
+ uint32_t port_reset_mode:2; // 10:09
+ uint32_t pwm_ctrl:2; // 08:07
+ uint32_t kpp:4; // 06:03
+ uint32_t t2d_clk_sel:1; // 02:02
+ uint32_t t2d_clk_enable:1; // 01:01
+ uint32_t t2d_offset_msb:1; // 00:00
+#endif
+ } Bits;
+ uint32_t Reg32;
+} PLL_CFG1_REG;
+
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t en_cml:3; // 02:00
+ uint32_t tri_en:1; // 03:03
+ uint32_t test_sel:3; // 06:04
+ uint32_t test_en:1; // 07:07
+ uint32_t reserved0:24;
+#else
+ uint32_t reserved0:24;
+ uint32_t test_en:1; // 07:07
+ uint32_t test_sel:3; // 06:04
+ uint32_t tri_en:1; // 03:03
+ uint32_t en_cml:3; // 02:00
+#endif
+ } Bits;
+ uint32_t Reg32;
+} PLL_OCTRL_REG;
+
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t out:12; // 11:00
+ uint32_t reserved:19; // 30:12
+ uint32_t lock:1; // 31:31
+#else
+ uint32_t lock:1; // 31:31
+ uint32_t reserved:19; // 30:12
+ uint32_t out:12; // 11:00
+#endif
+ } Bits;
+ uint32_t Reg32;
+} PLL_STAT_REG;
+
+#if IS_BCMCHIP(6858) || IS_BCMCHIP(63158) || IS_BCMCHIP(6846) || \
+ IS_BCMCHIP(6856) || IS_BCMCHIP(63178) || IS_BCMCHIP(47622) || \
+ IS_BCMCHIP(6878) || IS_BCMCHIP(6855) || IS_BCMCHIP(6756)
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t ndiv_int:10; // 09:00
+ uint32_t reserved0:2; // 11:10
+ uint32_t ndiv_frac:20; // 31:12
+#else
+ uint32_t ndiv_frac:20; // 31:12
+ uint32_t reserved0:2; // 11:10
+ uint32_t ndiv_int:10; // 09:00
+#endif
+ } Bits;
+ uint32_t Reg32;
+} PLL_DECNDIV_REG;
+
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t pdiv:4; // 03:00
+ uint32_t reserved0:12; // 15:04
+ uint32_t mdiv0:8; // 23:16
+ uint32_t mdiv1:8; // 31:24
+#else
+ uint32_t mdiv1:8; // 31:24
+ uint32_t mdiv0:8; // 23:16
+ uint32_t reserved0:12; // 15:04
+ uint32_t pdiv:4; // 03:00
+#endif
+ } Bits;
+ uint32_t Reg32;
+} PLL_DECPDIV_REG;
+
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t mdiv2:8; // 07:00
+ uint32_t mdiv3:8; // 15:08
+ uint32_t mdiv4:8; // 23:16
+ uint32_t mdiv5:8; // 31:24
+#else
+ uint32_t mdiv5:8; // 31:24
+ uint32_t mdiv4:8; // 23:16
+ uint32_t mdiv3:8; // 15:08
+ uint32_t mdiv2:8; // 07:00
+#endif
+ } Bits;
+ uint32_t Reg32;
+} PLL_DECCH25_REG;
+#elif IS_BCMCHIP(63146) || IS_BCMCHIP(4912)
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t ndiv_int:10; // 9:0
+ uint32_t ndiv_frac:22; // 31:10
+
+#else
+ uint32_t ndiv_frac:22; // 31:10
+ uint32_t ndiv_int:10; // 9:0
+#endif
+ } Bits;
+ uint32_t Reg32;
+} PLL_DECNDIV_REG;
+
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t pdiv:4; // 03:00
+ uint32_t mdiv5:9; // 12:04
+ uint32_t mdiv0:9; // 21:13
+ uint32_t mdiv1:9; // 30:22
+ uint32_t reserved0:1; // 31:31
+#else
+ uint32_t reserved0:1; // 31:31
+ uint32_t mdiv1:9; // 30:22
+ uint32_t mdiv0:9; // 21:13
+ uint32_t mdiv5:9; // 12:04
+ uint32_t pdiv:4; // 03:00
+#endif
+ } Bits;
+ uint32_t Reg32;
+} PLL_DECPDIV_REG;
+
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t mdiv2:9; // 08:00
+ uint32_t mdiv3:9; // 17:09
+ uint32_t mdiv4:9; // 26:18
+ uint32_t reserved0:5; // 31:27
+#else
+ uint32_t reserved0:5; // 31:27
+ uint32_t mdiv4:9; // 26:18
+ uint32_t mdiv3:9; // 17:09
+ uint32_t mdiv2:9; // 08:00
+#endif
+ } Bits;
+ uint32_t Reg32;
+} PLL_DECCH25_REG;
+#endif
+
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t manual_clk_en:1;
+ uint32_t manual_reset_ctl:1;
+ uint32_t freq_scale_used:1; // R/O
+ uint32_t dpg_capable:1; // R/O
+ uint32_t manual_mem_pwr:2;
+ uint32_t manual_iso_ctl:1;
+ uint32_t manual_ctl:1;
+ uint32_t dpg_ctl_en:1;
+ uint32_t pwr_dn_req:1;
+ uint32_t pwr_up_req:1;
+ uint32_t mem_pwr_ctl_en:1;
+ uint32_t blk_reset_assert:1;
+ uint32_t mem_stby:1;
+ uint32_t reserved:5;
+ uint32_t pwr_cntl_state:5;
+ uint32_t freq_scalar_dyn_sel:1; // R/O
+ uint32_t pwr_off_state:1; // R/O
+ uint32_t pwr_on_state:1; // R/O
+ uint32_t pwr_good:1; // R/O
+ uint32_t dpg_pwr_state:1; // R/O
+ uint32_t mem_pwr_state:1; // R/O
+ uint32_t iso_state:1; // R/O
+ uint32_t reset_state:1; // R/O
+#else
+ uint32_t reset_state:1; // R/O 31:31
+ uint32_t iso_state:1; // R/O
+ uint32_t mem_pwr_state:1; // R/O
+ uint32_t dpg_pwr_state:1; // R/O
+ uint32_t pwr_good:1; // R/O
+ uint32_t pwr_on_state:1; // R/O
+ uint32_t pwr_off_state:1; // R/O
+ uint32_t freq_scalar_dyn_sel:1; // R/O
+ uint32_t pwr_cntl_state:5;
+ uint32_t reserved:5;
+ uint32_t mem_stby:1;
+ uint32_t blk_reset_assert:1; // 12:12
+ uint32_t mem_pwr_ctl_en:1;
+ uint32_t pwr_up_req:1;
+ uint32_t pwr_dn_req:1;
+ uint32_t dpg_ctl_en:1;
+ uint32_t manual_ctl:1;
+ uint32_t manual_iso_ctl:1;
+ uint32_t manual_mem_pwr:2;
+ uint32_t dpg_capable:1; // R/O
+ uint32_t freq_scale_used:1; // R/O
+ uint32_t manual_reset_ctl:1;
+ uint32_t manual_clk_en:1;
+#endif
+ } Bits;
+ uint32_t Reg32;
+} BPCM_PWR_ZONE_N_CONTROL;
+
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t pwr_ok_delay_sel:3;
+ uint32_t pwk_ok_thresh:2;
+ uint32_t reserved:3;
+ uint32_t iso_on_delay:4;
+ uint32_t iso_off_delay:4;
+ uint32_t clock_on_delay:4;
+ uint32_t clock_off_delay:4;
+ uint32_t reset_on_delay:4;
+ uint32_t reset_off_delay:4;
+#else
+ uint32_t reset_off_delay:4; // 31:28
+ uint32_t reset_on_delay:4;
+ uint32_t clock_off_delay:4;
+ uint32_t clock_on_delay:4;
+ uint32_t iso_off_delay:4;
+ uint32_t iso_on_delay:4;
+ uint32_t reserved:3;
+ uint32_t pwk_ok_thresh:2;
+ uint32_t pwr_ok_delay_sel:3;
+#endif
+ } Bits;
+ uint32_t Reg32;
+} BPCM_PWR_ZONE_N_CONFIG1;
+
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t delay_prescale_sel:3;
+ uint32_t slew_prescale_sel:3;
+ uint32_t reserved:6;
+ uint32_t dpgn_on_delay:4;
+ uint32_t dpg1_on_delay:4;
+ uint32_t dpg_off_delay:4;
+ uint32_t mem_on_delay:4;
+ uint32_t mem_off_delay:4;
+#else
+ uint32_t mem_off_delay:4; // 31:28
+ uint32_t mem_on_delay:4;
+ uint32_t dpg_off_delay:4;
+ uint32_t dpg1_on_delay:4;
+ uint32_t dpgn_on_delay:4;
+ uint32_t reserved:6;
+ uint32_t slew_prescale_sel:3;
+ uint32_t delay_prescale_sel:3;
+#endif
+ } Bits;
+ uint32_t Reg32;
+} BPCM_PWR_ZONE_N_CONFIG2;
+
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t fs_bypass_en:1;
+ uint32_t gear_sel:1;
+ uint32_t use_dyn_gear_sel:1;
+ uint32_t reserved2:1;
+ uint32_t low_gear_div:3;
+ uint32_t high_gear_div:3;
+ uint32_t reserved:22;
+#else
+ uint32_t reserved:22; // 31:10
+ uint32_t high_gear_div:3;
+ uint32_t low_gear_div:3;
+ uint32_t reserved2:1;
+ uint32_t use_dyn_gear_sel:1;
+ uint32_t gear_sel:1;
+ uint32_t fs_bypass_en:1;
+#endif
+ } Bits;
+ uint32_t Reg32;
+} BPCM_ZONE_N_FREQ_SCALAR_CONTROL;
+
+typedef struct {
+ BPCM_PWR_ZONE_N_CONTROL control;
+ BPCM_PWR_ZONE_N_CONFIG1 config1;
+ BPCM_PWR_ZONE_N_CONFIG2 config2;
+#if IS_BCMCHIP(63178) || IS_BCMCHIP(47622) || IS_BCMCHIP(6878) || IS_BCMCHIP(63146)\
+ || IS_BCMCHIP(4912) || IS_BCMCHIP(6855) || IS_BCMCHIP(6756)
+ uint32_t reserved0;
+ uint32_t timer_control;
+ uint32_t timer_status;
+ uint32_t reserved1[2];
+#else
+ BPCM_ZONE_N_FREQ_SCALAR_CONTROL freq_scalar_control;
+#endif
+#if IS_BCMCHIP(6846) || IS_BCMCHIP(6856)
+ uint32_t reserved[4];
+#endif
+} BPCM_ZONE;
+
+#define BPCMZoneOffset(reg) offsetof(BPCM_ZONE,reg)
+#define BPCMZoneRegOffset(reg) (BPCMZoneOffset(reg) >> 2)
+
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t pmb_Addr:8;
+ uint32_t hw_rev:8;
+ uint32_t module_id:16;
+#else
+ uint32_t module_id:16;
+ uint32_t hw_rev:8;
+ uint32_t pmb_Addr:8;
+#endif
+ } Bits;
+ uint32_t Reg32;
+} BPCM_UBUS_ID_REG;
+
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t num_zones:8;
+ uint32_t sr_reg_bits:8;
+ uint32_t pllType:2;
+ uint32_t reserved0:1;
+ uint32_t ubus:1;
+ uint32_t reserved1:12;
+#else
+ uint32_t reserved1:12;
+ uint32_t ubus:1;
+ uint32_t reserved0:1;
+ uint32_t pllType:2;
+ uint32_t sr_reg_bits:8;
+ uint32_t num_zones:8;
+#endif
+ } Bits;
+ uint32_t Reg32;
+} BPCM_UBUS_CAPABILITES_REG;
+
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t ctrl_eswap:4;
+ uint32_t reserved0:4;
+ uint32_t ctrl_cd:4;
+ uint32_t reserved1:4;
+ uint32_t ctrl_seclev:8;
+ uint32_t reqout_seclev:8;
+#else
+ uint32_t reqout_seclev:8;
+ uint32_t ctrl_seclev:8;
+ uint32_t reserved1:4;
+ uint32_t ctrl_cd:4;
+ uint32_t reserved0:4;
+ uint32_t ctrl_eswap:4;
+#endif
+ } Bits;
+ uint32_t Reg32;
+} BPCM_UBUS_CTRL_REG;
+
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint64_t addr_in:24;
+ uint64_t addr_out:24;
+ uint64_t pid:8;
+ uint64_t size:5;
+ uint64_t cmddta:1;
+ uint64_t en:2;
+#else
+ uint64_t en:2;
+ uint64_t cmddta:1;
+ uint64_t size:5;
+ uint64_t pid:8;
+ uint64_t addr_out:24;
+ uint64_t addr_in:24;
+#endif
+ } Bits;
+ struct {
+ uint32_t word0;
+ uint32_t word1;
+ } Regs32;
+ uint64_t Reg64;
+} BPCM_UBUS_CFG_REG;
+
+#if IS_BCMCHIP(63178)
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t counter:8;
+ uint32_t reserved2:7;
+ uint32_t enable:1;
+ uint32_t reserved1:16;
+#else
+ uint32_t reserved1:16;
+ uint32_t enable:1;
+ uint32_t reserved2:7;
+ uint32_t counter:8;
+#endif
+ } Bits;
+ uint32_t Reg32;
+} BPCM_CLKRST_VREG_CONTROL;
+#endif
+#if IS_BCMCHIP(63146)
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t ubus_soft_reset:1;
+ uint32_t alt_ubus_clk_sel:1;
+ uint32_t observe_clk_sw_init:1;
+ uint32_t alt_emmc_clk_sel:1;
+ uint32_t reserved:5;
+ uint32_t enable:1;
+ uint32_t counter:8;
+ uint32_t reserved2:14;
+#else
+ uint32_t reserved2:14;
+ uint32_t counter:8;
+ uint32_t enable:1;
+ uint32_t reserved:5;
+ uint32_t alt_emmc_clk_sel:1;
+ uint32_t observe_clk_sw_init:1;
+ uint32_t alt_ubus_clk_sel:1;
+ uint32_t ubus_soft_reset:1;
+
+#endif
+ } Bits;
+ uint32_t Reg32;
+} BPCM_CLKRST_VREG_CONTROL;
+#endif
+
+
+#if IS_BCMCHIP(47622) || IS_BCMCHIP(6756)
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t ubus_soft_rst:1;
+ uint32_t alt_ubus_clk_sel:1;
+ uint32_t obsv_clk_swinit:1;
+ uint32_t reserved0:17;
+ uint32_t wl0_rf_enable:1;
+ uint32_t wl1_rf_enable:1;
+ uint32_t reserved1:10;
+#else
+ uint32_t reserved1:10;
+ uint32_t wl1_rf_enable:1;
+ uint32_t wl0_rf_enable:1;
+ uint32_t reserved0:17;
+ uint32_t obsv_clk_swinit:1;
+ uint32_t alt_ubus_clk_sel:1;
+ uint32_t ubus_soft_rst:1;
+#endif
+ } Bits;
+ uint32_t Reg32;
+} BPCM_CLKRST_CONTROL;
+#endif
+
+// There is a 20-bit address used to access any given BPCM register. The upper 8-bits
+// is the device address and the lower 12-bits is used to represent the BPCM register
+// set for that device. 32-bit registers are allocated on 4-byte boundaries
+// (i.e. 0, 1, 2, 3...) rather than on byte boundaries (0x00, 0x04, 0x08, 0x0c...)
+// Thus, to get the actual address of any given register within the device's address
+// space, I'll use the "C" offsetof macro and divide the result by 4
+// e.g.:
+// int regOffset = offsetof(BPCM_REGS,BPCM_AVS_PWD_CONTROL); // yields the byte offset of the target register
+// int regAddress = regOffset/4; // yields the 32-bit word offset of the target register
+// The ReadBPCMReg and WriteBPCMReg functions will always take a device address
+// (address of the BPCM device) and register offset (like regOffset above). The offset
+// will be divided by 4 and used as the lower 12-bits of the actual target address, while the
+// device address will serve as the upper 8-bits of the actual address.
+typedef struct {
+#if IS_BCMCHIP(6846) || IS_BCMCHIP(6856) || IS_BCMCHIP(63178) || \
+ IS_BCMCHIP(47622) || IS_BCMCHIP(6878) || IS_BCMCHIP(63146) || \
+ IS_BCMCHIP(4912) || IS_BCMCHIP(6855) || IS_BCMCHIP(6756)
+ // PMB-slave:
+ BPCM_ID_REG id_reg; // offset 0x00, PMB reg index 0
+ BPCM_CAPABILITES_REG capabilities; // offset 0x04, PMB reg index 1
+ uint32_t reserved0[2]; // offset 0x08, PMB reg index 2/3
+ // BPCM
+ uint32_t control; // offset 0x10, PMB reg index 4
+ BPCM_SR_CONTROL sr_control; // offset 0x14, PMB reg index 5
+ uint32_t reserved1[2]; // offset 0x18, PMB reg index 6/7
+ // Client-specific registers
+ uint32_t client_specific[24]; // offset 0x20, PMB reg index 8..31
+ // Zones
+ BPCM_ZONE zones[]; // offset 0x80..(0x20 + MAX_ZONES*32)), PMB reg index 32..(32+(MAX_ZONES*8-1))
+#else
+ BPCM_ID_REG id_reg; // offset = 0x00, actual offset = 0
+ BPCM_CAPABILITES_REG capabilities; // offset = 0x04, actual offset = 1
+ uint32_t control; // offset = 0x08, actual offset = 2
+ BPCM_STATUS_REG status; // offset = 0x0c, actual offset = 3
+ BPCM_AVS_ROSC_CONTROL_REG rosc_control; // offset = 0x10, actual offset = 4
+ BPCM_AVS_ROSC_THRESHOLD rosc_thresh_h; // offset = 0x14, actual offset = 5
+ BPCM_AVS_ROSC_THRESHOLD rosc_thresh_s; // offset = 0x18, actual offset = 6
+ BPCM_AVS_ROSC_COUNT rosc_count; // offset = 0x1c, actual offset = 7
+ BPCM_AVS_PWD_CONTROL pwd_control; // offset = 0x20, actual offset = 8
+ BPCM_PWD_ACCUM_CONTROL pwd_accum_control; // offset = 0x24, actual offset = 9
+ BPCM_SR_CONTROL sr_control; // offset = 0x28, actual offset = 10
+
+#if IS_BCMCHIP(63158)
+ uint32_t reserved; // offset = 0x2c, actual offset = 11
+ BPCM_GLOBAL_CNTL_0 global_control; // offset = 0x30, actual offset = 12
+ BPCM_GLOBAL_CNTL_1 global_control_1; // offset = 0x34, actual offset = 13
+ BPCM_GLOBAL_CNTL_2 global_control_2; // offset = 0x38, actual offset = 14
+ uint32_t global_status; // offset = 0x3c, actual offset = 15
+#else
+ BPCM_GLOBAL_CNTL global_control; // offset = 0x2c, actual offset = 11
+ BPCM_MISC_CONTROL misc_control; // offset = 0x30, actual offset = 12
+ BPCM_MISC_CONTROL2 misc_control2; // offset = 0x34, actual offset = 13
+ BPCM_SGPHY_CNTL sgphy_cntl; // offset = 0x38, actual offset = 14
+ BPCM_SGPHY_STATUS sgphy_status; // offset = 0x3c, actual offset = 15
+#endif
+ BPCM_ZONE zones[1020]; // offset = 0x40..0x3FFC, actual offset = 16..4095 (1020 * 4 = 4080 + 16 = 4096)
+#endif
+} BPCM_REGS; // total offset space = 4096
+
+#define BPCM_OFFSET(reg) (offsetof(BPCM_REGS,reg)>>2)
+
+#if !IS_BCMCHIP(6878) && !IS_BCMCHIP(6846) && !IS_BCMCHIP(6856) && !IS_BCMCHIP(6855)
+typedef struct {
+#if !IS_BCMCHIP(63178) && !IS_BCMCHIP(63146)
+ BPCM_ID_REG id_reg; // offset = 0x00, actual offset = 0
+ BPCM_CAPABILITES_REG capabilities; // offset = 0x04, actual offset = 1
+ uint32_t control; // offset = 0x08, actual offset = 2
+ BPCM_STATUS_REG status; // offset = 0x0c, actual offset = 3
+ BPCM_AVS_ROSC_CONTROL_REG rosc_control; // offset = 0x10, actual offset = 4
+ BPCM_AVS_ROSC_THRESHOLD rosc_thresh_h; // offset = 0x14, actual offset = 5
+ BPCM_AVS_ROSC_THRESHOLD rosc_thresh_s; // offset = 0x18, actual offset = 6
+ BPCM_AVS_ROSC_COUNT rosc_count; // offset = 0x1c, actual offset = 7
+ BPCM_AVS_PWD_CONTROL pwd_control; // offset = 0x20, actual offset = 8
+ BPCM_PWD_ACCUM_CONTROL pwd_accum_control; // offset = 0x24, actual offset = 9
+ BPCM_SR_CONTROL sr_control; // offset = 0x28, actual offset = 10
+ BPCM_GLOBAL_CNTL global_control; // offset = 0x2c, actual offset = 11
+ BPCM_MISC_CONTROL misc_control; // offset = 0x30, actual offset = 12
+ BPCM_MISC_CONTROL2 misc_control2; // offset = 0x34, actual offset = 13
+ uint32_t rvrsd[2];
+ BPCM_ZONE zones[1020]; // offset = 0x40..0x3FFC, actual offset = 16..4095 (1020 * 4 = 4080 + 16 = 4096)
+#else
+ BPCM_ID_REG id_reg; // offset = 0x00, actual offset = 0
+ BPCM_CAPABILITES_REG capabilities; // offset = 0x04, actual offset = 1
+ uint32_t reserved0[2]; // offset = 0x08, actual offset = 2
+ uint32_t cfg_control; // offset = 0x10, actual offset = 4
+ BPCM_SR_CONTROL sr_control; // offset = 0x14, actual offset = 5
+#if IS_BCMCHIP(63146)
+ uint32_t reserved1[2]; // offset = 0x18, actual offset = 6
+ uint32_t vdsl_arm_sr; // offset = 0x20, actual offset = 8
+ BPCM_VDSL_ARM_RST_CTL vdsl_arm_rst_control; // offset = 0x24, actual offset = 9
+ uint32_t reserved2[2]; // offset = 0x28, actual offset = 10
+ uint32_t vdsl_afe_config0; // offset = 0x30, actual offset = 12
+ uint32_t vdsl_afe_config1; // offset = 0x34, actual offset = 13
+ uint32_t reserved3[18]; // offset = 0x38, actual offset = 14
+#else
+ uint32_t reserved1[10]; // offset = 0x18, actual offset = 6
+ BPCM_MISC_CONTROL misc_control; // offset = 0x40, actual offset = 16
+ uint32_t vdsl_phy_ctl; // offset = 0x44, actual offset = 17
+ uint32_t vdsl_afe_ctl; // offset = 0x48, actual offset = 18
+ uint32_t reserved2[13]; // offset = 0x4c, actual offset = 19
+#endif
+ BPCM_ZONE zones; // offset = 0x80, actual offset = 32
+#endif
+} BPCM_VDSL_REGS; // total offset space = 4096
+
+#define BPCMVDSLOffset(reg) offsetof(BPCM_VDSL_REGS,reg)
+#define BPCMVDSLRegOffset(reg) (BPCMVDSLOffset(reg) >> 2)
+
+#endif
+
+#define BPCMOffset(reg) offsetof(BPCM_REGS,reg)
+#define BPCMRegOffset(reg) (BPCMOffset(reg) >> 2)
+
+#if IS_BCMCHIP(63138) || IS_BCMCHIP(63148) || IS_BCMCHIP(6858) || \
+ IS_BCMCHIP(63158)
+// ARM BPCM addresses as used by 63138/63148 and possibly others (28nm)
+typedef struct {
+ BPCM_ID_REG id_reg; // offset = 0x00, actual offset = 0
+ BPCM_CAPABILITES_REG capabilities; // offset = 0x04, actual offset = 1
+ uint32_t control; // offset = 0x08, actual offset = 2
+ BPCM_STATUS_REG status; // offset = 0x0c, actual offset = 3
+ BPCM_AVS_ROSC_CONTROL_REG rosc_control; // offset = 0x10, actual offset = 4
+ BPCM_AVS_ROSC_THRESHOLD rosc_thresh_h; // offset = 0x14, actual offset = 5
+ BPCM_AVS_ROSC_THRESHOLD rosc_thresh_s; // offset = 0x18, actual offset = 6
+ BPCM_AVS_ROSC_COUNT rosc_count; // offset = 0x1c, actual offset = 7
+ BPCM_AVS_PWD_CONTROL pwd_control; // offset = 0x20, actual offset = 8
+ BPCM_PWD_ACCUM_CONTROL pwd_accum_control; // offset = 0x24, actual offset = 9
+ BPCM_SR_CONTROL sr_control; // offset = 0x28, actual offset = 10
+ uint32_t reserved; // offset = 0x2c, actual offset = 11
+ ARM_CONTROL_REG arm_control; // offset = 0x30, actual offset = 12
+#if IS_BCMCHIP(63138)
+ ARM_CPUx_PWR_CTRL_REG arm_pwr_ctrl_0; // offset = 0x34, actual offset = 13
+ ARM_CPUx_PWR_CTRL_REG arm_pwr_ctrl_1; // offset = 0x38, actual offset = 14
+ ARM_CPUx_PWR_CTRL_REG arm_neon_l2; // offset = 0x3c, actua; offset = 15
+#elif IS_BCMCHIP(63148)
+ uint32_t reserved1[3]; // offset = 0x34, actual offset = 13..15
+#elif IS_BCMCHIP(6858)
+ uint32_t biu_clk_control0; // offset = 0x34, actual offset = 13
+ uint32_t reserved1[2]; // offset = 0x38, actual offset = 13..14
+#endif
+ BPCM_ZONE zones[1020]; // offset = 0x40..0x3FFC, actual offset = 16..4095 (1020 * 4 = 4080 + 16 = 4096)
+} ARM_BPCM_REGS;
+#define ARMBPCMOffset(reg) offsetof(ARM_BPCM_REGS,reg)
+#define ARMBPCMRegOffset(reg) (ARMBPCMOffset(reg) >> 2)
+
+#elif IS_BCMCHIP(6846) || IS_BCMCHIP(6856)
+typedef struct {
+ CLASSIC_BPCM_ID_REG id_reg; // offset = 0x00, actual offset = 0
+ BPCM_CAPABILITES_REG capabilities; // offset = 0x04, actual offset = 1
+ uint32_t control; // offset = 0x08, actual offset = 2
+ BPCM_STATUS_REG status; // offset = 0x0c, actual offset = 3
+ BPCM_AVS_ROSC_CONTROL_REG rosc_control; // offset = 0x10, actual offset = 4
+ BPCM_AVS_ROSC_THRESHOLD rosc_thresh; // offset = 0x14, actual offset = 5
+ BPCM_AVS_ROSC_COUNT rosc_count; // offset = 0x18, actual offset = 6
+ BPCM_AVS_PWD_CONTROL pwd_control; // offset = 0x1c, actual offset = 7
+ BPCM_SR_CONTROL sr_control; // offset = 0x20, actual offset = 8
+ uint32_t reserved0[3]; // offset = 0x24, actual offset = 9
+ ARM_CONTROL_REG arm_control; // offset = 0x30, actual offset = 12
+ uint32_t biu_clk_control0; // offset = 0x34, actual offset = 13
+ uint32_t reserved1[2]; // offset = 0x38, actual offset = 14
+ BPCM_ZONE zones; // offset = 0x40, actual offset = 16
+} ARM_BPCM_REGS;
+
+#define ARMBPCMOffset(reg) offsetof(ARM_BPCM_REGS,reg)
+#define ARMBPCMRegOffset(reg) (ARMBPCMOffset(reg) >> 2)
+
+#elif IS_BCMCHIP(63178) || IS_BCMCHIP(47622) || IS_BCMCHIP(6878) || IS_BCMCHIP(6855) || IS_BCMCHIP(6756)
+typedef struct {
+ BPCM_ID_REG id_reg; // offset = 0x00, actual offset = 0
+ BPCM_CAPABILITES_REG capabilities; // offset = 0x04, actual offset = 1
+ uint32_t reserved0[2]; // offset = 0x08, actual offset = 2
+ uint32_t cfg_control; // offset = 0x10, actual offset = 4
+ BPCM_SR_CONTROL sr_control; // offset = 0x14, actual offset = 5
+ uint32_t reserved1[6]; // offset = 0x18, actual offset = 6
+ ARM_CONTROL_REG arm_control; // offset = 0x30, actual offset = 12
+ uint32_t biu_clk_control0; // offset = 0x34, actual offset = 13
+ uint32_t tbd[18]; // offset = 0x38, actual offset = 14
+ BPCM_ZONE zones; // offset = 0x80, actual offset = 32
+} ARM_BPCM_REGS;
+#define ARMBPCMOffset(reg) offsetof(ARM_BPCM_REGS,reg)
+#define ARMBPCMRegOffset(reg) (ARMBPCMOffset(reg) >> 2)
+
+#elif IS_BCMCHIP(63146) || IS_BCMCHIP(4912)
+typedef struct {
+ BPCM_ID_REG id_reg; // offset = 0x00, actual offset = 0
+ BPCM_CAPABILITES_REG capabilities; // offset = 0x04, actual offset = 1
+ uint32_t reserved0[2]; // offset = 0x08, actual offset = 2
+ uint32_t cfg_control; // offset = 0x10, actual offset = 4
+ BPCM_SR_CONTROL sr_control; // offset = 0x14, actual offset = 5
+ uint32_t reserved1[2]; // offset = 0x18, actual offset = 6
+ BPCM_ZONE zones; // offset = 0x20, actual offset = 8
+ ARM_CONTROL_REG arm_control; // offset = 0x40, actual offset = 16
+} ARM_BPCM_REGS;
+#define ARMBPCMOffset(reg) offsetof(ARM_BPCM_REGS,reg)
+#define ARMBPCMRegOffset(reg) (ARMBPCMOffset(reg) >> 2)
+
+#endif
+
+#if IS_BCMCHIP(6846) || IS_BCMCHIP(6856)
+typedef struct {
+ BPCM_ID_REG id_reg; // offset = 0x00, actual offset = 0
+ BPCM_CAPABILITES_REG capabilities; // offset = 0x04, actual offset = 1
+ uint32_t reserved0[2]; // offset = 0x08..0x0c, actual offset 2..3
+ PLL_CTRL_REG resets; // offset = 0x10, actual offset = 4
+ PLL_CFG0_REG cfg0; // offset = 0x14, actual offset = 5
+ PLL_CFG1_REG cfg1; // offset = 0x18, actual offset = 6
+ PLL_NDIV_REG ndiv; // offset = 0x1c, actual offset = 7
+ PLL_PDIV_REG pdiv; // offset = 0x20, actual offset = 8
+ PLL_LOOP0_REG loop0; // offset = 0x24, actual offset = 9
+ PLL_LOOP1_REG loop1; // offset = 0x28, actual offset = a
+ PLL_CHCFG_REG ch01_cfg; // offset = 0x2c, actual offset = b
+ PLL_CHCFG_REG ch23_cfg; // offset = 0x30, actual offset = c
+ PLL_CHCFG_REG ch45_cfg; // offset = 0x34, actual offset = d
+ PLL_OCTRL_REG octrl; // offset = 0x38, actual offset = e
+ PLL_STAT_REG stat; // offset = 0x3c, actual offset = f
+ uint32_t strap; // offset = 0x40, actual offset = 0x10
+ PLL_DECNDIV_REG decndiv; // offset = 0x44, actual offset = 0x11
+ PLL_DECPDIV_REG decpdiv; // offset = 0x48, actual offset = 0x12
+ PLL_DECCH25_REG decch25; // offset = 0x4c, actual offset = 0x13
+} PLL_CLASSIC_BPCM_REGS;
+
+#define PLLCLASSICBPCMOffset(reg) offsetof(PLL_CLASSIC_BPCM_REGS,reg)
+#define PLLCLASSICBPCMRegOffset(reg) (PLLCLASSICBPCMOffset(reg) >> 2)
+
+#elif IS_BCMCHIP(6878)
+typedef struct {
+ BPCM_ID_REG id_reg; // offset = 0x00
+ BPCM_CAPABILITES_REG capabilities; // offset = 0x04
+ uint32_t reserved0[6]; // offset = 0x08
+ PLL_CTRL_REG resets; // offset = 0x20
+ PLL_CFG0_REG cfg0; // offset = 0x24
+ PLL_CFG1_REG cfg1; // offset = 0x28
+ PLL_NDIV_REG ndiv; // offset = 0x2c
+ PLL_PDIV_REG pdiv; // offset = 0x30
+ PLL_LOOP0_REG loop0; // offset = 0x34
+ uint32_t reserved1; // offset = 0x38
+ PLL_LOOP1_REG loop1; // offset = 0x3c
+ PLL_CHCFG_REG ch01_cfg; // offset = 0x40
+ PLL_CHCFG_REG ch23_cfg; // offset = 0x44
+ PLL_CHCFG_REG ch45_cfg; // offset = 0x48
+ PLL_STAT_REG stat; // offset = 0x4c
+ uint32_t strap; // offset = 0x50
+ PLL_DECNDIV_REG decndiv; // offset = 0x54
+ PLL_DECPDIV_REG decpdiv; // offset = 0x58
+ PLL_DECCH25_REG decch25; // offset = 0x5c
+} PLL_CLASSIC_BPCM_REGS;
+
+#define PLLCLASSICBPCMOffset(reg) offsetof(PLL_CLASSIC_BPCM_REGS,reg)
+#define PLLCLASSICBPCMRegOffset(reg) (PLLCLASSICBPCMOffset(reg) >> 2)
+
+#endif
+
+typedef struct {
+#if IS_BCMCHIP(6846) || IS_BCMCHIP(6856)
+ BPCM_ID_REG id_reg; // offset = 0x00
+ BPCM_CAPABILITES_REG capabilities; // offset = 0x04
+ uint32_t reserved0[6]; // offset = 0x08
+ PLL_CTRL_REG resets; // offset = 0x20
+ PLL_CFG0_REG cfg0; // offset = 0x24
+ PLL_CFG1_REG cfg1; // offset = 0x28
+ PLL_NDIV_REG ndiv; // offset = 0x2c
+ PLL_PDIV_REG pdiv; // offset = 0x30
+ PLL_LOOP0_REG loop0; // offset = 0x34
+ uint32_t reserved1; // offset = 0x38
+ PLL_LOOP1_REG loop1; // offset = 0x3c
+ PLL_CHCFG_REG ch01_cfg; // offset = 0x40
+ PLL_CHCFG_REG ch23_cfg; // offset = 0x44
+ PLL_CHCFG_REG ch45_cfg; // offset = 0x48
+ PLL_STAT_REG stat; // offset = 0x4c
+ uint32_t strap; // offset = 0x50
+ PLL_DECNDIV_REG decndiv; // offset = 0x54
+ PLL_DECPDIV_REG decpdiv; // offset = 0x58
+ PLL_DECCH25_REG decch25; // offset = 0x5c
+#elif IS_BCMCHIP(63146) || IS_BCMCHIP(4912)
+ /* BIU PLL BCPM definition */
+ BPCM_ID_REG id_reg; // offset = 0x00
+ BPCM_CAPABILITES_REG capabilities; // offset = 0x04
+ uint32_t reserved0[2]; // offset = 0x08..0x0c
+ PLL_CTRL_REG resets; // offset = 0x10
+ uint32_t reserved1[2]; // offset = 0x14
+ PLL_NDIV_REG ndiv; // offset = 0x1c
+ PLL_PDIV_REG pdiv; // offset = 0x20
+ PLL_LOOP0_REG loop0; // offset = 0x24
+ PLL_LOOP1_REG loop1; // offset = 0x28
+ PLL_CHCFG_REG ch01_cfg; // offset = 0x2c
+ PLL_CHCFG_REG ch23_cfg; // offset = 0x30
+ PLL_CHCFG_REG ch45_cfg; // offset = 0x34
+ uint32_t reserved2; // offset = 0x38
+ PLL_STAT_REG stat; // offset = 0x3c
+ uint32_t strap; // offset = 0x40
+ PLL_DECNDIV_REG decndiv;// offset = 0x44
+ PLL_DECPDIV_REG decpdiv;// offset = 0x48
+ PLL_DECCH25_REG decch25;// offset = 0x4c
+#else
+ BPCM_ID_REG id_reg; // offset = 0x00, actual offset = 0
+ BPCM_CAPABILITES_REG capabilities; // offset = 0x04, actual offset = 1
+ uint32_t reserved0[2]; // offset = 0x08..0x0c, actual offset 2..3
+ PLL_CTRL_REG resets; // offset = 0x10, actual offset = 4
+ PLL_CFG0_REG cfg0; // offset = 0x14, actual offset = 5
+ PLL_CFG1_REG cfg1; // offset = 0x18, actual offset = 6
+ PLL_NDIV_REG ndiv; // offset = 0x1c, actual offset = 7
+ PLL_PDIV_REG pdiv; // offset = 0x20, actual offset = 8
+ PLL_LOOP0_REG loop0; // offset = 0x24, actual offset = 9
+ PLL_LOOP1_REG loop1; // offset = 0x28, actual offset = a
+ PLL_CHCFG_REG ch01_cfg; // offset = 0x2c, actual offset = b
+ PLL_CHCFG_REG ch23_cfg; // offset = 0x30, actual offset = c
+ PLL_CHCFG_REG ch45_cfg; // offset = 0x34, actual offset = d
+ PLL_OCTRL_REG octrl; // offset = 0x38, actual offset = e
+ PLL_STAT_REG stat; // offset = 0x3c, actual offset = f
+ uint32_t strap; // offset = 0x40, actual offset = 0x10
+#if IS_BCMCHIP(6858) || IS_BCMCHIP(63178) || IS_BCMCHIP(47622) || \
+ IS_BCMCHIP(6878) || IS_BCMCHIP(6855) || IS_BCMCHIP(6756)
+ PLL_DECNDIV_REG decndiv; // offset = 0x44, actual offset = 0x11
+ PLL_DECPDIV_REG decpdiv; // offset = 0x48, actual offset = 0x12
+ PLL_DECCH25_REG decch25; // offset = 0x4c, actual offset = 0x13
+#else
+ uint32_t decndiv; // offset = 0x44, actual offset = 0x11
+ uint32_t decpdiv; // offset = 0x48, actual offset = 0x12
+ uint32_t decch25; // offset = 0x4c, actual offset = 0x13
+#endif
+#endif
+} PLL_BPCM_REGS;
+
+#define PLLBPCMOffset(reg) offsetof(PLL_BPCM_REGS,reg)
+#define PLLBPCMRegOffset(reg) (PLLBPCMOffset(reg) >> 2)
+
+#if IS_BCMCHIP(63146)
+typedef struct {
+ BPCM_ID_REG id_reg; // offset = 0x00, actual offset = 0
+ BPCM_CAPABILITES_REG capabilities; // offset = 0x04, actual offset = 1
+ uint32_t reserved0[2]; // offset = 0x08..0x0c, actual offset 2..3
+ PLL_CTRL_REG resets; // offset = 0x10, actual offset = 4
+ uint32_t reserved1[5]; // offset = 0x14, actual offset = 5
+ PLL_NDIV_REG ndiv; // offset = 0x28, actual offset = a
+ PLL_PDIV_REG pdiv; // offset = 0x2c, actual offset = b
+ PLL_CHCFG_REG ch01_cfg; // offset = 0x30, actual offset = c
+ PLL_CHCFG_REG ch23_cfg; // offset = 0x34, actual offset = d
+ PLL_CHCFG_REG ch45_cfg; // offset = 0x38, actual offset = e
+ PLL_LOOP0_REG loop0; // offset = 0x3c, actual offset = f
+ PLL_LOOP1_REG loop1; // offset = 0x40, actual offset = 0x10
+ PLL_STAT_REG stat; // offset = 0x44, actual offset = 0x11
+ uint32_t strap; // offset = 0x48, actual offset = 0x12
+ PLL_DECNDIV_REG decndiv;// offset = 0x4c, actual offset = 0x13
+ PLL_DECPDIV_REG decpdiv;// offset = 0x50, actual offset = 0x14
+ PLL_DECCH25_REG decch25;// offset = 0x54, actual offset = 0x15
+} AFEPLL_BPCM_REGS;
+
+#define AFEPLLBPCMOffset(reg) offsetof(AFEPLL_BPCM_REGS,reg)
+#define AFEPLLBPCMRegOffset(reg) (AFEPLLBPCMOffset(reg) >> 2)
+#endif
+
+#if IS_BCMCHIP(63146) || IS_BCMCHIP(4912)
+typedef struct {
+ BPCM_ID_REG id_reg; // offset = 0x00
+ BPCM_CAPABILITES_REG capabilities; // offset = 0x04
+ uint32_t reserved0[2]; // offset = 0x08..0x0c
+ PLL_CTRL_REG resets; // offset = 0x10
+ uint32_t reserved1[5]; // offset = 0x14
+ PLL_NDIV_REG ndiv; // offset = 0x28
+ PLL_PDIV_REG pdiv; // offset = 0x2c
+ PLL_CHCFG_REG ch01_cfg; // offset = 0x30
+ PLL_CHCFG_REG ch23_cfg; // offset = 0x34
+ PLL_CHCFG_REG ch45_cfg; // offset = 0x38
+ PLL_STAT_REG stat; // offset = 0x3c
+ uint32_t strap; // offset = 0x40
+ PLL_DECNDIV_REG decndiv;// offset = 0x44
+ PLL_DECPDIV_REG decpdiv;// offset = 0x48
+ PLL_DECCH25_REG decch25;// offset = 0x4c
+} RDPPLL_BPCM_REGS;
+
+#define RDPPLLBPCMOffset(reg) offsetof(RDPPLL_BPCM_REGS,reg)
+#define RDPPLLBPCMRegOffset(reg) (RDPPLLBPCMOffset(reg) >> 2)
+
+#endif
+
+#if IS_BCMCHIP(6878) || IS_BCMCHIP(6855)
+typedef union {
+ struct {
+ uint32_t dac_data:10; // [09:00]
+ uint32_t vavs_minb0:1; // [10:10] - R/O iVDDC <= Vmin0
+ uint32_t vavs_minb1:1; // [11:11] - R/O iVDDC <= Vmin1
+ uint32_t vavs_warnb0:1; // [12:12] - R/O iVDDC <= Vwarn0
+ uint32_t vavs_warnb1:1; // [13:13] - R/O iVDDC <= Vwarn1
+ uint32_t vavs_maxb0:1; // [14:14] - R/O iVDDC <= Vmax0
+ uint32_t vavs_maxb1:1; // [15:15] - R/O iVDDC <= Vmax1
+ uint32_t adc_data:10; // [25:16] - R/O ADC output data in offset binary format
+ uint32_t adc_data_valid:1; // [26:26] - R/O
+ uint32_t reserved:5; // [31:27] - R/O
+ } Bits;
+ uint32_t Reg32;
+} APVTMON_DATA_REG;
+
+typedef union {
+ // little endian - from page 5 of "ANA_VTMON_TS16FF_S0 & ANA_VTMON_PAD_TS16FF_Sx Module Specification"
+ // defaut value = 0x00000001
+ struct {
+ uint32_t bg_adj:3; // [02:00] - default = 1
+ uint32_t vtest_sel:4; // [06:03] - VTest = i_VDCC * (<value>+1)/20, default = 0
+ uint32_t rmon_sel:3; // [09:07]
+ uint32_t mode:3; // [12:10]
+ uint32_t adc_insel:2; // [14:13] - only used in expert mode (mode = 0b111)
+ uint32_t dac_en:1; // [15:15] - only used in expert mode (mode = 0b111)
+ uint32_t con_pad:1; // [16:16] - only used in expert mode (mode = 0b111)
+ uint32_t burnin_en:1; // [17:17] - only used in expert mode (mode = 0b111)
+ uint32_t reserved:1; // [18:18]
+ uint32_t vdccmon_refadj_max1:1; // [19:19]
+ uint32_t vdccmon_refadj_min0:4; // [23:20]
+ uint32_t vdccmon_refadj_min1:3; // [26:24]
+ uint32_t dac_reset:1; // [27:27]
+ uint32_t dac_set:1; // [28:28]
+ uint32_t vdccmon_refadj_max0:3; // [31:29]
+ } Bits;
+ uint32_t Reg32;
+} APVTMON_CONTROL_REG;
+
+typedef union {
+ struct {
+ uint32_t rstb:1; // [00:00] - low active. default = 0 (i.e. in reset)
+ uint32_t pwr_dn:1; // [01:01] - high-active. default = 1 (i.e. powered down)
+ uint32_t clk_en:1; // [02:02]
+ uint32_t reserved0:1; // [03:03]
+ uint32_t sel:3; // [06:04] - see enum below - reset value = 0
+ uint32_t reserved1:1; // [07:07]
+ uint32_t clk_div:5; // [12:08] - value needed to divide pm_clk by (2*clk_div) to generate a 5MHz clock
+ uint32_t reserved2:19; // [31:13]
+ } Bits;
+ uint32_t Reg32;
+} APVTMON_CONFIG_STATUS_REG;
+
+typedef union {
+ struct {
+ uint32_t accum_en:1; // [00:00]
+ uint32_t round_en:1; // [01:01] defaults to 1 (rounding enabled)
+ uint32_t reserved1:6; // [07:02]
+ uint32_t skip_len:4; // [11:08] how many samples to skip prior to starting averaging, default = 3
+ uint32_t reserved0:20; // [31:12]
+ } Bits;
+ uint32_t Reg32;
+} APVTMON_ACQ_CONFIG_REG;
+
+typedef union {
+ struct {
+ uint32_t warn_threshold:10; // [09:00] - in ADC counts
+ uint32_t warn_en:1; // [10:10]
+ uint32_t reserved0:3; // [13:11]
+ uint32_t clear_warn:1; // [14:14] - Write only
+ uint32_t warn:1; // [15:15] - Read only
+ uint32_t reset_threshold:10; // [25:16] - in ADC counts
+ uint32_t reset_en:1; // [26:26]
+ uint32_t reserved1:3; // [29:27]
+ uint32_t clear_reset:1; // [30:30] - Write only
+ uint32_t reset:1; // [31:31] - Read only
+ } Bits;
+ uint32_t Reg32;
+} APVTMON_TEMP_WARN_RESET_REG;
+
+typedef union {
+ struct {
+ uint32_t reset_value:10; // [09:00]
+ uint32_t reserved:22; // [31:10]
+ } Bits;
+ uint32_t Reg32;
+} APVTMON_RESET_TEMP_REG;
+
+typedef union {
+ struct {
+ uint32_t value:10; // [09:00] - there are <meas_len> fractional bits
+ uint32_t reserved0:8; // [17:10]
+ uint32_t valid:1; // [18:18]
+ uint32_t busy:1; // [19:19]
+ uint32_t reserved1:4; // [23:20]
+ uint32_t meas_len:3; // [26:24] #samples = 2^<value>
+ uint32_t reserved2:4; // [30:27]
+ uint32_t enable:1; // [31:31]
+ } Bits;
+ uint32_t Reg32;
+} APVTMON_ACCUM_REG;
+
+typedef union {
+ struct {
+ uint32_t sel:6; // [05:00] - ring oscillator select (0..35)
+ uint32_t reserved2:2; // [07:06]
+ uint32_t srm_ind_en:1; // [08:08]
+ uint32_t srm_ind_od:1; // [09:09]
+ uint32_t srm_ind_sel:2; // [11:10]
+ uint32_t reserved1:4; // [15:12]
+ uint32_t out:1; // [16:16]
+ uint32_t all_idl_low_oscs:1; // [17:17]
+ uint32_t all_idl_hi_oscs:1; // [18:18]
+ uint32_t reserved0:13; // [31:19]
+ } Bits;
+ uint32_t Reg32;
+} ROSC_CTRL_STS_REG;
+
+typedef union {
+ struct {
+ uint32_t count:16; // [15:00]
+ uint32_t valid:1; // [16:16]
+ uint32_t too_lo:1; // [17:17] - count <= thresh_lo (only when THRESH_EN == 1)
+ uint32_t too_hi:1; // [18:18] - count <= thresh_hi (only when THRESH_EN == 1)
+ uint32_t reserved0:5; // [23:19]
+ uint32_t continuous:1; // [24:24]
+ uint32_t thresh_en:1; // [25:25] - enable threshold detection
+ uint32_t ectr_en:1; // [26:26] - enable counter
+ uint32_t src_en:1; // [27:27] - enable event source (may not do anything???)
+ uint32_t meas_len:4; // [31:28] - interval = 2^(<meas_len>+1)
+ } Bits;
+ uint32_t Reg32;
+} ECTR_CTRL_STS_REG;
+
+typedef union {
+ struct {
+ uint32_t thresh_lo:16; // [15:00]
+ uint32_t thresh_hi:16; // [31:16]
+ } Bits;
+ uint32_t Reg32;
+} ECTR_THRESH_REG;
+
+typedef struct {
+ ECTR_CTRL_STS_REG count_reg;
+ ECTR_THRESH_REG thresh_reg;
+} ROSC_REGS;
+
+typedef struct {
+ BPCM_ID_REG id_reg; // offset 0x00, PMB reg index 0
+ BPCM_CAPABILITES_REG capabilities; // offset 0x04, PMB reg index 1
+ uint32_t reserved0[2]; // offset 0x08, PMB reg index 2/3
+ uint32_t reserved1[12]; // offset 0x10, PMB reg index 4-15 (future proofing )
+ APVTMON_CONTROL_REG control; // offset 0x40, PMB reg index 16
+ APVTMON_CONFIG_STATUS_REG config; // offset 0x44, PMB reg index 17
+ APVTMON_DATA_REG adc_data; // offset 0x48, PMB reg index 18
+ uint32_t reserved2; // offset 0x4c, PMB reg index 19
+ APVTMON_ACQ_CONFIG_REG accum_config; // offset 0x50, PMB reg index 20
+ APVTMON_TEMP_WARN_RESET_REG warn_rst; // offset 0x54, PMB reg index 21
+ uint32_t reserved3[2]; // offset 0x58, PMB reg index 23
+ APVTMON_ACCUM_REG acq_accum_regs[8]; // offset 0x60, PMB reg index 24-31
+ ROSC_CTRL_STS_REG rosc_ctrl_sts; // offset 0x80, PMB reg index 32
+ uint32_t rosc_en_lo; // offset 0x84, PMB reg index 33
+ uint32_t rosc_en_hi; // offset 0x88, PMB reg index 34
+ uint32_t rosc_idle_lo; // offset 0x8c, PMB reg index 35
+ uint32_t rosc_idle_hi; // offset 0x90, PMB reg index 36
+ uint32_t reserved4[3]; // offset 0x94, PMB reg index 37-39
+ ROSC_REGS ectr_regs; // offset 0xa0, PMB reg index 40/41
+} PVTMON_REGS;
+// retrieves the BYTE offset of a PVTMON register:
+#define PVTMON_OFFSET(reg) (offsetof(PVTMON_REGS,reg)>>2)
+
+typedef struct {
+// PMB-slave
+ BPCM_ID_REG id_reg; // offset 0x00, PMB reg index 0
+ BPCM_CAPABILITES_REG capabilities; // offset 0x04, PMB reg index 1
+ uint32_t reserved0[6]; // offset 0x08, PMB reg index 2-7
+ // ROSC registers
+ BPCM_AVS_ROSC_CONTROL_REG rosc_control; // offset 0x20, PMB reg index 8
+ BPCM_AVS_ROSC_THRESHOLD rosc_thresh_h; // offset 0x24, PMB reg index 9
+ BPCM_AVS_ROSC_THRESHOLD rosc_thresh_s; // offset 0x28, PMB reg index 10
+ BPCM_AVS_ROSC_COUNT rosc_count; // offset 0x2c, PMB reg index 11
+ BPCM_AVS_PWD_CONTROL pwd_ctrl; // offset 0x30, PMB reg index 12
+ BPCM_PWD_ACCUM_CONTROL pwd_accum; // offset 0x34, PMB reg index 13
+} ARS_REGS;
+// retrieves the BYTE offset of an ARS register:
+#define ARS_OFFSET(reg) (offsetof(ARS_REGS, reg)>>2)
+
+#endif
+
+typedef struct {
+ BPCM_UBUS_ID_REG id_reg; /* offset = 0x00, actual offset = 0 */
+ BPCM_UBUS_CAPABILITES_REG capabilities; /* offset = 0x04, actual offset = 1 */
+ uint32_t reserved0; /* offset = 0x08, actual offset = 2 */
+ BPCM_UBUS_CTRL_REG ctrl; /* offset = 0x0c, actual offset = 3 */
+ BPCM_UBUS_CFG_REG cfg[4]; /* offset = 0x10..0x2c, actual offset = 4..11 */
+} BPCM_UBUS_REG;
+
+#define UBUSBPCMOffset(reg) offsetof(BPCM_UBUS_REG,reg)
+#define UBUSBPCMRegOffset(reg) (UBUSBPCMOffset(reg) >> 2)
+
+#if IS_BCMCHIP(63178) || IS_BCMCHIP(47622) || IS_BCMCHIP(6756)
+typedef struct {
+ // PMB-slave:
+ BPCM_ID_REG id_reg; // offset 0x00, PMB reg index 0
+ BPCM_CAPABILITES_REG capabilities; // offset 0x04, PMB reg index 1
+ uint32_t reserved0[7]; // offset 0x08-0x20, PMB reg index 2-8
+ uint32_t control; // offset 0x24, PMB reg index 9
+#if IS_BCMCHIP(47622) || IS_BCMCHIP(6756)
+ uint32_t observe_cntrl; // offset 0x28, PMB reg index 10
+ uint32_t observe_div; // offset 0x2c, PMB reg index 11
+ uint32_t observe_enable; // offset 0x30, PMB reg index 12
+ BPCM_CLKRST_CONTROL clkrst_control; // offset 0x34, PMB reg index 13
+#elif IS_BCMCHIP(63146)
+ uint32_t unused[3]; // offset 0x28, PMB reg index 10
+ BPCM_CLKRST_VREG_CONTROL vreg_control; // offset 0x34, PMB reg index ??
+#elif IS_BCMCHIP(63178)
+ uint32_t unused[10]; // offset 0x28, PMB reg index 10
+ BPCM_CLKRST_VREG_CONTROL vreg_control; // offset 0x50, PMB reg index 19
+#endif
+} BPCM_CLKRST_REGS;
+#else
+typedef struct {
+ BPCM_ID_REG id_reg; // offset = 0x00, actual offset = 0
+ BPCM_CAPABILITES_REG capabilities; // offset = 0x04, actual offset = 1
+ uint32_t control; // offset = 0x08, actual offset = 2
+ BPCM_STATUS_REG status; // offset = 0x0c, actual offset = 3
+ BPCM_AVS_ROSC_CONTROL_REG rosc_control; // offset = 0x10, actual offset = 4
+ BPCM_AVS_ROSC_THRESHOLD rosc_thresh_h; // offset = 0x14, actual offset = 5
+ BPCM_AVS_ROSC_THRESHOLD rosc_thresh_s; // offset = 0x18, actual offset = 6
+ BPCM_AVS_ROSC_COUNT rosc_count; // offset = 0x1c, actual offset = 7
+ BPCM_AVS_PWD_CONTROL pwd_control; // offset = 0x20, actual offset = 8
+#if IS_BCMCHIP(6878)
+ uint32_t bpcm_ctrl; // offset = 0x24, actual offset = 9
+ uint32_t clkrst_control; // offset = 0x28, actual offset = 10
+ uint32_t ext_observe_ctrl; // offset = 0x2c, actual offset = 11
+ uint32_t reserved0[2]; // offset = 0x30-0x34, actual offset 12-13
+ uint32_t xtal_control; // offset = 0x38, actual offset = 14
+ uint32_t clkrst_stat; // offset = 0x3c, actual offset = 15
+ uint32_t reserved1; // offset = 0x40, actual offset = 16
+ uint32_t clkrst_ena_clk_31_0; // offset = 0x44, actual offset = 17
+ uint32_t clkrst_ena_clk_63_32; // offset = 0x48, actual offset = 18
+ uint32_t clkrst_ena_clk_95_64; // offset = 0x4c, actual offset = 19
+ uint32_t reserved2[11]; // offset = 0x50-0x78, actual offset = 20-30
+ uint32_t clkrst_ena_reset_31_0; // offset = 0x7c, actual offset = 31
+ uint32_t clkrst_ena_reset_63_32; // offset = 0x80, actual offset = 32
+ uint32_t clkrst_pll_observe_clk; // offset = 0x84, actual offset = 33
+ uint32_t clkrst_ref_cnt_thresh; // offset = 0x88, actual offset = 34
+ uint32_t clkrst_pll_clk_low_th; // offset = 0x8c, actual offset = 35
+ uint32_t clkrst_pll_clk_hi_th; // offset = 0x90, actual offset = 36
+ uint32_t clkrst_pll_clk_stat; // offset = 0x94, actual offset = 37
+ uint32_t clkrst_sticky_bit_stat; // offset = 0x98, actual offset = 38
+ uint32_t clkrst_clk250_src_sel; // offset = 0x9c, actual offset = 39
+ uint32_t clkrst_ena_force; // offset = 0xa0, actual offset = 40
+ uint32_t reserved3; // offset = 0xa4, actual offset = 41
+ uint32_t pmd_xtal_cntl; // offset = 0xa8, actual offset = 42
+ uint32_t pmd_xtal_cntl2; // offset = 0xac, actual offset = 43
+#else
+ uint32_t reserved0; // offset = 0x24, actual offset = 9
+ BPCM_SR_CONTROL sr_control; // offset = 0x28, actual offset = 10
+ uint32_t reserved1; // offset = 0x2c, actual offset = 11
+ uint32_t clkrst_cfg; // offset = 0x30, actual offset = 12
+#if IS_BCMCHIP(63146)
+ BPCM_CLKRST_VREG_CONTROL vreg_control; // offset 0x50, PMB reg index 19
+#else
+ uint32_t clkrst_control; // offset = 0x34, actual offset = 13
+#endif
+ uint32_t xtal_control; // offset = 0x38, actual offset = 14
+ uint32_t clkrst_stat; // offset = 0x3c, actual offset = 15
+#endif
+} BPCM_CLKRST_REGS;
+#endif
+
+#define CLKRSTBPCMOffset(reg) offsetof(BPCM_CLKRST_REGS, reg)
+#define CLKRSTBPCMRegOffset(reg) (CLKRSTBPCMOffset(reg) >> 2)
+
+#if IS_BCMCHIP(47622) || IS_BCMCHIP(6756)
+typedef struct {
+ BPCM_ID_REG id_reg; // offset 0x00, PMB reg index 0
+ BPCM_CAPABILITES_REG capabilities; // offset 0x04, PMB reg index 1
+ uint32_t reserved0[2]; // offset 0x08, PMB reg index 2/3
+ // BPCM
+ uint32_t control; // offset 0x10, PMB reg index 4
+ BPCM_SR_CONTROL sr_control; // offset 0x14, PMB reg index 5
+
+ uint32_t z0_pm_cntl; // offset 0x18
+ uint32_t z0_pm_status; // offset 0x1c
+ uint32_t z1_pm_cntl; // offset 0x20
+ uint32_t z2_pm_cntl; // offset 0x24
+ uint32_t reserved1[22]; // reserved from 0x28 to 0x7F
+ BPCM_ZONE zones[];
+
+} BPCM_SYSPORT_REGS;
+
+#define SYSPOffset(reg) offsetof(BPCM_SYSPORT_REGS,reg)
+#define SYSPRegOffset(reg) (SYSPOffset(reg) >> 2)
+
+#endif
+
+#if IS_BCMCHIP(63146) || IS_BCMCHIP(4912)
+typedef struct {
+ // ETH_PMB
+ BPCM_ID_REG id_reg; // offset 0x00, PMB reg index 0
+ BPCM_CAPABILITES_REG capabilities; // offset 0x04, PMB reg index 1
+ uint32_t reserved8[2]; // offset 0x08, PMB reg index 2/3
+ // ETH_CFG
+ uint32_t dpg_zones; // offset 0x10, PMB reg index 4
+ uint32_t soft_rst;; // offset 0x14, PMB reg index 5
+ uint32_t reserved18[2]; // offset 0x18, PMB reg index 6/7
+ // ETH_CORE
+#if IS_BCMCHIP(63146)
+ uint32_t qphy_cntrl; // offset 0x20
+ uint32_t qphy_status; // offset 0x24
+ uint32_t sphy_cntrl; // offset 0x28
+ uint32_t sphy_status; // offset 0x2c
+ uint32_t serdes0_cntrl; // offset 0x30
+ uint32_t serdes0_status;// offset 0x34
+ uint32_t serdes0_an_st; // offset 0x38
+ uint32_t serdes1_cntrl; // offset 0x3c
+ uint32_t serdes1_status;// offset 0x40
+ uint32_t serdes1_an_st; // offset 0x44
+ uint32_t reserved48[3];
+ uint32_t rgmii_cntrl; // offset 0x54
+ uint32_t reserved58[2];
+ uint32_t serdes0_st1; // offset 0x60
+ uint32_t serdes1_st1; // offset 0x64
+ uint32_t reserved68;
+ uint32_t serdes0_pwr_cntrl;// offset 0x6c
+ uint32_t serdes1_pwr_cntrl;// offset 0x70
+#endif
+#if IS_BCMCHIP(4912)
+ uint32_t qphy_cntrl; // offset 0x20
+ uint32_t qphy_status; // offset 0x24
+ uint32_t reserved28[2];
+ uint32_t serdes0_cntrl; // offset 0x30
+ uint32_t serdes0_status;// offset 0x34
+ uint32_t serdes0_an_st; // offset 0x38
+ uint32_t serdes1_cntrl; // offset 0x3c
+ uint32_t serdes1_status;// offset 0x40
+ uint32_t serdes1_an_st; // offset 0x44
+ uint32_t serdes2_cntrl; // offset 0x48
+ uint32_t serdes2_status;// offset 0x4c
+ uint32_t serdes2_an_st; // offset 0x50
+ uint32_t rgmii_cntrl; // offset 0x54
+ uint32_t xport0_cntrl; // offset 0x58
+ uint32_t xport1_cntrl; // offset 0x5c
+ uint32_t serdes0_st1; // offset 0x60
+ uint32_t serdes1_st1; // offset 0x64
+ uint32_t serdes2_st1; // offset 0x68
+ uint32_t serdes0_pwr_cntrl;// offset 0x6c
+ uint32_t serdes1_pwr_cntrl;// offset 0x70
+ uint32_t serdes2_pwr_cntrl;// offset 0x74
+#endif
+} BPCM_ETH_REGS;
+
+#define BPCMETHOffset(reg) offsetof(BPCM_ETH_REGS,reg)
+#define BPCMETHRegOffset(reg) (BPCMETHOffset(reg) >> 2)
+
+#endif
+
+// *************************** macros ******************************
+#ifndef offsetof
+#define offsetof(TYPE, MEMBER) ((unsigned long) &((TYPE *)0)->MEMBER)
+#endif
+
+#endif
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/47622_map_part.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/47622_map_part.h
new file mode 100644
index 0000000000..c8c47ac00b
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/47622_map_part.h
@@ -0,0 +1,494 @@
+/*
+<:copyright-BRCM:2015:DUAL/GPL:standard
+
+ Copyright (c) 2015 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+
+*/
+
+#ifndef __BCM47622_MAP_PART_H
+#define __BCM47622_MAP_PART_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "bcmtypes.h"
+
+#define MEMC_PHYS_BASE 0x80180000
+#define MEMC_SIZE 0x24000
+
+#define PMC_PHYS_BASE 0x80200000
+#define PMC_SIZE 0x00200000
+#define PMC_OFFSET 0x00100000
+#define PROC_MON_OFFSET 0x00100000
+#define PMB_OFFSET 0x00120100
+
+#define PERF_PHYS_BASE 0xff800000
+#define PERF_SIZE 0x13000
+#define TIMR_OFFSET 0x0400
+#define WDTIMR0_OFFSET 0x0480
+#define WDTIMR1_OFFSET 0x04c0
+
+#define BIUCFG_PHYS_BASE 0x81060000
+#define BIUCFG_SIZE 0x3000
+#define BIUCFG_OFFSET 0x0000
+
+#define BOOTLUT_PHYS_BASE 0xffff0000
+#define BOOTLUT_SIZE 0x1000
+
+#define GIC_PHYS_BASE 0x81000000
+#define GIC_SIZE 0x10000
+#define GIC_OFFSET 0x0000
+#define GICD_OFFSET 0x1000
+#define GICC_OFFSET 0x2000
+
+#define PMC_BASE (PMC_PHYS_BASE + PMC_OFFSET)
+#define PROC_MON_BASE (PMC_PHYS_BASE + PROC_MON_OFFSET)
+#define PMB_BASE (PMC_PHYS_BASE + PMB_OFFSET)
+#define BIUCFG_BASE (BIUCFG_PHYS_BASE + BIUCFG_OFFSET)
+#define WDTIMR0_BASE (PERF_PHYS_BASE + WDTIMR0_OFFSET)
+
+#ifndef __ASSEMBLER__
+/*
+ * Power Management Control
+ */
+typedef struct PmcCtrlReg {
+ uint32 gpTmr0Ctl; /* 0x018 */
+ uint32 gpTmr0Cnt; /* 0x01c */
+ uint32 gpTmr1Ctl; /* 0x020 */
+ uint32 gpTmr1Cnt; /* 0x024 */
+ uint32 hostMboxIn; /* 0x028 */
+ uint32 hostMboxOut; /* 0x02c */
+ uint32 reserved[4]; /* 0x030 */
+ uint32 dmaCtrl; /* 0x040 */
+ uint32 dmaStatus; /* 0x044 */
+ uint32 dma0_3FifoStatus; /* 0x048 */
+ uint32 reserved1[4]; /* 0x04c */
+ uint32 diagControl; /* 0x05c */
+ uint32 diagHigh; /* 0x060 */
+ uint32 diagLow; /* 0x064 */
+ uint32 reserved8; /* 0x068 */
+ uint32 addr1WndwMask; /* 0x06c */
+ uint32 addr1WndwBaseIn; /* 0x070 */
+ uint32 addr1WndwBaseOut; /* 0x074 */
+ uint32 addr2WndwMask; /* 0x078 */
+ uint32 addr2WndwBaseIn; /* 0x07c */
+ uint32 addr2WndwBaseOut; /* 0x080 */
+ uint32 scratch; /* 0x084 */
+ uint32 reserved9; /* 0x088 */
+ uint32 softResets; /* 0x08c */
+ uint32 reserved2; /* 0x090 */
+ uint32 m4keCoreStatus; /* 0x094 */
+ uint32 reserved3; /* 0x098 */
+ uint32 ubSlaveTimeout; /* 0x09c */
+ uint32 diagEn; /* 0x0a0 */
+ uint32 devTimeout; /* 0x0a4 */
+ uint32 ubusErrorOutMask; /* 0x0a8 */
+ uint32 diagCaptStopMask; /* 0x0ac */
+ uint32 revId; /* 0x0b0 */
+ uint32 reserved4[4]; /* 0x0b4 */
+ uint32 diagCtrl; /* 0x0c4 */
+ uint32 diagStat; /* 0x0c8 */
+ uint32 diagMask; /* 0x0cc */
+ uint32 diagRslt; /* 0x0d0 */
+ uint32 diagCmp; /* 0x0d4 */
+ uint32 diagCapt; /* 0x0d8 */
+ uint32 diagCnt; /* 0x0dc */
+ uint32 diagEdgeCnt; /* 0x0e0 */
+ uint32 reserved5[4]; /* 0x0e4 */
+ uint32 smisc_bus_config; /* 0x0f4 */
+ uint32 lfsr; /* 0x0f8 */
+ uint32 dqm_pac_lock; /* 0x0fc */
+ uint32 l1_irq_4ke_mask; /* 0x100 */
+ uint32 l1_irq_4ke_status; /* 0x104 */
+ uint32 l1_irq_mips_mask; /* 0x108 */
+ uint32 l1_irq_mips_status; /* 0x10c */
+ uint32 l1_irq_mips1_mask; /* 0x110 */
+ uint32 reserved6[3]; /* 0x114 */
+ uint32 l2_irq_gp_mask; /* 0x120 */
+ uint32 l2_irq_gp_status; /* 0x124 */
+ uint32 l2_irq_gp_set; /* 0x128 */
+ uint32 reserved7; /* 0x12c */
+ uint32 gp_in_irq_mask; /* 0x130 */
+ uint32 gp_in_irq_status; /* 0x134 */
+ uint32 gp_in_irq_set; /* 0x138 */
+ uint32 gp_in_irq_sense; /* 0x13c */
+ uint32 gp_in; /* 0x140 */
+ uint32 gp_out; /* 0x144 */
+} PmcCtrlReg;
+
+typedef struct PmcDmaReg {
+ /* 0x00 */
+ uint32 src;
+ uint32 dest;
+ uint32 cmdList;
+ uint32 lenCtl;
+ /* 0x10 */
+ uint32 rsltSrc;
+ uint32 rsltDest;
+ uint32 rsltHcs;
+ uint32 rsltLenStat;
+} PmcDmaReg;
+
+typedef struct PmcTokenReg {
+ /* 0x00 */
+ uint32 bufSize;
+ uint32 bufBase;
+ uint32 idx2ptrIdx;
+ uint32 idx2ptrPtr;
+ /* 0x10 */
+ uint32 unused[2];
+ uint32 bufSize2;
+} PmcTokenReg;
+
+typedef struct PmcPerfPowReg {
+ uint32 freqScalarCtrl; /* 0x3c */
+ uint32 freqScalarMask; /* 0x40 */
+} PmcPerfPowReg;
+
+typedef struct PmcDQMPac {
+ uint32 dqmPac[32];
+} PmcDQMPac;
+
+typedef struct PmcDQMReg {
+ uint32 cfg; /* 0x1c00 */
+ uint32 _4keLowWtmkIrqMask; /* 0x1c04 */
+ uint32 mipsLowWtmkIrqMask; /* 0x1c08 */
+ uint32 lowWtmkIrqMask; /* 0x1c0c */
+ uint32 _4keNotEmptyIrqMask; /* 0x1c10 */
+ uint32 mipsNotEmptyIrqMask; /* 0x1c14 */
+ uint32 notEmptyIrqSts; /* 0x1c18 */
+ uint32 queueRst; /* 0x1c1c */
+ uint32 notEmptySts; /* 0x1c20 */
+ uint32 nextAvailMask; /* 0x1c24 */
+ uint32 nextAvailQueue; /* 0x1c28 */
+ uint32 mips1LowWtmkIrqMask; /* 0x1c2c */
+ uint32 mips1NotEmptyIrqMask; /* 0x1c30 */
+ uint32 autoSrcPidInsert; /* 0x1c34 */
+ uint32 timerIrqStatus; /* 0x1c38 */
+ uint32 timerStatus; /* 0x1c3c */
+ uint32 _4keTimerIrqMask; /* 0x1c40 */
+ uint32 mipsTimerIrqMask; /* 0x1c44 */
+ uint32 mips1TimerIrqMask; /* 0x1c48 */
+} PmcDQMReg;
+
+typedef struct PmcCntReg {
+ uint32 cntr[10];
+ uint32 unused[6]; /* 0x28-0x3f */
+ uint32 cntrIrqMask;
+ uint32 cntrIrqSts;
+} PmcCntReg;
+
+typedef struct PmcDqmQCtrlReg {
+ uint32 size;
+ uint32 cfga;
+ uint32 cfgb;
+ uint32 cfgc;
+} PmcDqmQCtrlReg;
+
+typedef struct PmcDqmQDataReg {
+ uint32 word[4];
+} PmcDqmQDataReg;
+
+typedef struct PmcDqmQMibReg {
+ uint32 qNumFull[32];
+ uint32 qNumEmpty[32];
+ uint32 qNumPushed[32];
+} PmcDqmQMibReg;
+
+typedef struct SSBMaster {
+ uint32 ssbmControl; /* 0x0060 */
+ uint32 ssbmWrData; /* 0x0064 */
+ uint32 ssbmRdData; /* 0x0068 */
+ uint32 ssbmStatus; /* 0x006c */
+} SSBMaster;
+
+typedef struct PmmReg {
+ uint32 memPowerCtrl; /* 0x0000 */
+ uint32 regSecurityConfig; /* 0x0004 */
+} PmmReg;
+
+typedef struct keyholeReg {
+ uint32 ctrlSts;
+ uint32 wrData;
+ uint32 mutex;
+ uint32 rdData;
+} keyholeReg;
+
+typedef struct PmbBus {
+ uint32 config; /* 0x0100 */
+ uint32 arbiter; /* 0x0104 */
+ uint32 timeout; /* 0x0108 */
+ uint32 unused1; /* 0x010c */
+ keyholeReg keyhole[4]; /* 0x0110-0x014f */
+ uint32 unused2[44]; /* 0x0150-0x01ff */
+ uint32 map[64]; /* 0x0200-0x02ff */
+}PmbBus;
+
+typedef struct CoreCtrl {
+ uint32 coreEnable; /* 0x0400 */
+ uint32 autoresetControl; /* 0x0404 */
+ uint32 coreIdle; /* 0x0408 */
+ uint32 coreResetCause; /* 0x040c */
+ uint32 memPwrDownCtrl0; /* 0x0410 */
+ uint32 memPwrDownSts0; /* 0x0414 */
+ uint32 memPwrDownCtrl1; /* 0x0418 */
+ uint32 memPwrDownSts1; /* 0x041c */
+ uint32 sysFlg0Status; /* 0x0420 */
+ uint32 sysFlg0Set; /* 0x0424 */
+ uint32 sysFlg0Clear; /* 0x0428 */
+ uint32 unused1; /* 0x042c */
+ uint32 usrFlg0Status; /* 0x0430 */
+ uint32 usrFlg0Set; /* 0x0434 */
+ uint32 usrFlg0Clear; /* 0x0438 */
+ uint32 unused2; /* 0x043c */
+ uint32 subsystemRev; /* 0x0440 */
+ uint32 resetVector; /* 0x0444 */
+} CoreCtrl;
+
+typedef struct CoreState {
+ uint32 sysMbx[8]; /* 0x0480 */
+ uint32 usrMbx[8]; /* 0x04a0 */
+ uint32 sysMtx[4]; /* 0x04c0 */
+ uint32 usrMtx[8]; /* 0x04d0 */
+} CoreState;
+
+typedef struct CoreIntr {
+ uint32 irqStatus; /* 0x0500 */
+ uint32 irqSet; /* 0x0504 */
+ uint32 irqClear; /* 0x0508 */
+ uint32 unused1; /* 0x050c */
+ uint32 srqStatus; /* 0x0510 */
+ uint32 srqSet; /* 0x0514 */
+ uint32 srqClear; /* 0x0518 */
+ uint32 unused2; /* 0x051c */
+ uint32 drqStatus; /* 0x0520 */
+ uint32 drqSet; /* 0x0524 */
+ uint32 drqClear; /* 0x0528 */
+ uint32 unused3; /* 0x052c */
+ uint32 frqStatus; /* 0x0530 */
+ uint32 frqSet; /* 0x0534 */
+ uint32 frqClear; /* 0x0538 */
+ uint32 unused4; /* 0x053c */
+ uint32 hostIrqLatched; /* 0x0540 */
+ uint32 hostIrqSet; /* 0x0544 */
+ uint32 hostIrqClear; /* 0x0548 */
+ uint32 hostIrqEnable; /* 0x054c */
+ uint32 obusFaultStatus; /* 0x0550 */
+ uint32 obusFaultClear; /* 0x0554 */
+ uint32 obusFaultAddr; /* 0x0558 */
+} CoreIntr;
+
+typedef struct CoreProfile {
+ uint32 mutex; /* 0x0580 */
+ uint32 lastConfPcLo; /* 0x0584 */
+ uint32 lastConfPcHi; /* 0x0588 */
+ uint32 lastPcLo; /* 0x058c */
+ uint32 lastPcHi; /* 0x0590 */
+ uint32 braTargetPc0Lo; /* 0x0594 */
+ uint32 braTargetPc0Hi; /* 0x0598 */
+ uint32 braTargetPc1Lo; /* 0x059c */
+ uint32 braTargetPc1Hi; /* 0x05a0 */
+ uint32 braTargetPc2Lo; /* 0x05a4 */
+ uint32 braTargetPc2Hi; /* 0x05a8 */
+ uint32 braTargetPc3Lo; /* 0x05ac */
+ uint32 braTargetPc3Hi; /* 0x05b0 */
+ uint32 unused[3]; /* 0x05b4-0x05bf */
+ uint32 profSampleW[4]; /* 0x05c0 */
+} CoreProfile;
+
+typedef struct MaestroMisc {
+ CoreCtrl coreCtrl; /* 0x0400 */
+ uint32 unused1[14]; /* 0x0448-0x047f */
+ CoreState coreState; /* 0x0480 */
+ uint32 unused2[4]; /* 0x04f0-0x04ff */
+ CoreIntr interrupt; /* 0x0500 */
+ uint32 unused3[9]; /* 0x055c-0x057f */
+ CoreProfile profile; /* 0x0580 */
+} MaestroMisc;
+
+typedef struct Pmc {
+ uint32 unused0[1030];
+ PmcCtrlReg ctrl; /* 0x1018 */
+ uint32 unused1[622]; /* 0x1148-0x1cff */
+ PmcDQMPac dqmPac; /* 0x1b00 */
+ uint32 unused5[32]; /* 0x1b80-0x1bff */
+ PmcDQMReg dqm; /* 0x1c00 */
+ uint32 unused6[749]; /* 0x1c4c-0x27ff */
+ uint32 qStatus[32]; /* 0x2800 */
+ uint32 unused7[480]; /* 0x2880-0x2fff */
+ PmcDqmQMibReg qMib; /* 0x3000 */
+ uint32 unused8[928]; /* 0x3180-0x3fff */
+ PmcDqmQCtrlReg dqmQCtrl[8]; /* 0x4000 */
+ uint32 unused9[992]; /* 0x4080-0x4fff */
+ PmcDqmQDataReg dqmQData[8]; /* 0x5000 */
+} Pmc;
+
+#define PMC ((volatile Pmc * const) PMC_BASE)
+typedef struct Procmon {
+ uint32 unused00[256];
+ MaestroMisc maestroReg; /* 0x00400 */
+ uint32 unused10[32396]; /* 0x005d0-0x1ffff */
+ PmmReg pmm; /* 0x20000 */
+ uint32 unused11[22]; /* 0x20008-0x2005f */
+ SSBMaster ssbMasterCtrl; /* 0x20060 */
+ uint32 unused12[36]; /* 0x20070-0x200ff */
+ PmbBus pmb; /* 0x20100 */
+ uint32 unused13[32576]; /* 0x20300-0x3ffff */
+ uint32 qsm[128]; /* 0x40000-0x401ff */
+ uint32 unused14[65408]; /* 0x40200-0x7ffff */
+ uint32 dtcm[1024]; /* 0x80000-0x80fff */
+} Procmon;
+#define PROCMON ((volatile Procmon * const) PROC_MON_BASE)
+
+typedef struct PMSSBMasterControl {
+ uint32 control;
+ uint32 wr_data;
+ uint32 rd_data;
+} PMSSBMasterControl;
+
+typedef struct
+{
+ uint32 control;
+#define PMC_PMBM_START (1 << 31)
+#define PMC_PMBM_TIMEOUT (1 << 30)
+#define PMC_PMBM_SLAVE_ERR (1 << 29)
+#define PMC_PMBM_BUSY (1 << 28)
+#define PMC_PMBM_BUS_SHIFT (20)
+#define PMC_PMBM_Read (0 << 24)
+#define PMC_PMBM_Write (1 << 24)
+ uint32 wr_data;
+ uint32 mutex;
+ uint32 rd_data;
+} PMB_keyhole_reg;
+
+typedef struct PMBMaster {
+ uint32 config;
+#define PMB_NUM_REGS_SHIFT (20)
+#define PMB_NUM_REGS_MASK (0x3ff)
+ uint32 arbitger;
+ uint32 timeout;
+ uint32 reserved;
+ PMB_keyhole_reg keyhole[4];
+ uint32 reserved1[44];
+ uint32 map[64];
+} PMBMaster;
+#define PMB ((volatile PMBMaster * const) PMB_BASE)
+
+typedef struct WDTimer {
+ uint32 WatchDogDefCount;/* Write 0xff00 0x00ff to Start timer
+ * Write 0xee00 0x00ee to Stop and re-load default count
+ * * * Read from this register returns current watch dog count
+ * * */
+ uint32 WatchDogCtl;
+
+ /* Number of 50-MHz ticks for WD Reset pulse to last */
+ uint32 WDResetCount;
+
+#define SOFT_RESET 0x00000001
+ uint32 WDTimerCtl;
+
+ uint32 WDAccessCtl;
+} WDTimer;
+
+#define WDTIMER0 ((volatile WDTimer * const) WDTIMR0_BASE)
+
+typedef struct BIUCFG_Access {
+ uint32 permission; /* 0x0 */
+ uint32 sbox; /* 0x4 */
+ uint32 cpu_defeature; /* 0x8 */
+ uint32 dbg_security; /* 0xc */
+ uint32 rsvd1[32]; /* 0x10 - 0x8f */
+ uint64 violation[2]; /* 0x90 - 0x9f */
+ uint32 ts_access[2]; /* 0xa0 - 0xa7 */
+ uint32 rsvd2[22];
+}BIUCFG_Access;
+
+typedef struct BIUCFG_Cluster {
+ uint32 permission; /* 0x0 */
+ uint32 config; /* 0x4 */
+ uint32 status; /* 0x8 */
+ uint32 control; /* 0xc */
+ uint32 cpucfg; /* 0x10 */
+ uint32 dbgrom; /* 0x14 */
+ uint32 rsvd1[2]; /* 0x18 - 0x1f */
+ uint64 rvbar_addr[4]; /* 0x20 - 0x3f */
+ uint32 rsvd2[48]; /* 0x40 - 0xff */
+}BIUCFG_Cluster;
+
+typedef struct BIUCFG_Bac {
+ uint32 bac_permission; /* 0x00 */
+ uint32 bac_periphbase; /* 0x04 */
+ uint32 rsvd[2]; /* 0x08 - 0x0f */
+ uint32 bac_event; /* 0x10 */
+ uint32 rsvd_1[3]; /* 0x14 - 0x1f */
+ uint32 bac_ccicfg; /* 0x20 */
+ uint32 bac_cciaddr; /* 0x24 */
+ uint32 rsvd_2[4]; /* 0x28 - 0x37 */
+ uint32 bac_ccievs2; /* 0x38 */
+ uint32 bac_ccievs3; /* 0x3c */
+ uint32 bac_ccievs4; /* 0x40 */
+ uint32 rsvd_3[3]; /* 0x44 - 0x4f */
+ uint32 bac_ccievm0; /* 0x50 */
+ uint32 bac_ccievm1; /* 0x54 */
+ uint32 rsvd_4[2]; /* 0x58 - 0x5f */
+ uint32 bac_dapapbcfg; /* 0x60 */
+ uint32 bac_status; /* 0x64 */
+ uint32 rsvd_5[2]; /* 0x68 - 0x6f */
+ uint32 cpu_therm_irq_cfg; /* 0x70 */
+ uint32 cpu_therm_threshold_cfg; /* 0x74 */
+ uint32 rsvd_6; /* 0x78 */
+ uint32 cpu_therm_temp; /* 0x7c */
+ uint32 rsvd_7[32]; /* 0x80 - 0xff */
+} BIUCFG_Bac;
+
+typedef struct BIUCFG_Aux {
+ uint32 aux_permission; /* 0x00 */
+ uint32 rsvd[3]; /* 0x04 - 0x0f */
+ uint32 c0_clk_control; /* 0x10 */
+ uint32 c0_clk_ramp; /* 0x14 */
+ uint32 c0_clk_pattern; /* 0x18 */
+ uint32 rsvd_1; /* 0x1c */
+ uint32 c1_clk_control; /* 0x20 */
+ uint32 c1_clk_ramp; /* 0x24 */
+ uint32 c1_clk_pattern; /* 0x28 */
+ uint32 rsvd_2[53]; /* 0x2c - 0xff */
+} BIUCFG_Aux;
+
+typedef struct BIUCFG {
+ BIUCFG_Access access; /* 0x0 - 0xff*/
+ BIUCFG_Cluster cluster[2]; /* 0x100 - 0x2ff*/
+ BIUCFG_Bac bac; /* 0x300 - 0x3ff */
+ uint32 anonymous[192]; /* 0x400 - 0x6ff */
+ BIUCFG_Aux aux; /* 0x700 - 0x7ff */
+ uint32 anonymous_1[2560]; /* 0x800 - 0x2fff */
+}BIUCFG;
+#define BIUCFG ((volatile BIUCFG * const) BIUCFG_BASE)
+
+
+
+#endif /* __ASSEMBLER__ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/4908_map_part.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/4908_map_part.h
new file mode 100644
index 0000000000..02aa9cc80b
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/4908_map_part.h
@@ -0,0 +1,552 @@
+/*
+<:copyright-BRCM:2013:DUAL/GPL:standard
+
+ Copyright (c) 2013 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+*/
+
+#ifndef __BCM4908_MAP_PART_H
+#define __BCM4908_MAP_PART_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "bcmtypes.h"
+
+#define MEMC_PHYS_BASE 0x80018000 /* DDR IO Buf Control */
+#define MEMC_SIZE 0x4000
+
+#define PMC_PHYS_BASE 0x80200000
+#define PMC_SIZE 0x5000
+#define PMC_OFFSET 0x0000
+#define PROC_MON_PHYS_BASE 0x80280000
+#define PROC_MON_SIZE 0x1000
+#define PROC_MON_OFFSET 0x0000
+
+/* Perf block base address and size */
+#define PERF_PHYS_BASE 0xff800000
+#define PERF_SIZE 0x3000
+#define TIMR_OFFSET 0x0400 /* timer registers */
+
+#define URB_PHYS_BASE 0x81060000
+#define URB_SIZE 0x4000
+#define URB_OFFSET 0x0000
+#define URB_BIUARCH_OFFSET 0x1000
+#define URB_BIUCTRL_OFFSET 0x2000
+
+#define GIC_PHYS_BASE 0x81000000
+#define GIC_SIZE 0x10000
+#define GIC_OFFSET 0x0000
+#define GICD_OFFSET 0x1000
+#define GICC_OFFSET 0x2000
+
+#define PMC_BASE (PMC_PHYS_BASE + PMC_OFFSET)
+#define PROC_MON_BASE (PROC_MON_PHYS_BASE + PROC_MON_OFFSET)
+
+#define URB_BASE (URB_PHYS_BASE + URB_OFFSET)
+#define BIUARCH_BASE (URB_PHYS_BASE + URB_BIUARCH_OFFSET)
+#define BIUCTRL_BASE (URB_PHYS_BASE + URB_BIUCTRL_OFFSET)
+
+#ifndef __ASSEMBLER__
+
+/*
+ * Power Management Control
+ */
+typedef struct PmcCtrlReg {
+ /* 0x00 */
+ uint32 l1Irq4keMask;
+ uint32 l1Irq4keStatus;
+ uint32 l1IrqMipsMask;
+ uint32 l1IrqMipsStatus;
+ /* 0x10 */
+ uint32 l2IrqGpMask;
+ uint32 l2IrqGpStatus;
+ uint32 gpTmr0Ctl;
+ uint32 gpTmr0Cnt;
+ /* 0x20 */
+ uint32 gpTmr1Ctl;
+ uint32 gpTmr1Cnt;
+ uint32 hostMboxIn;
+ uint32 hostMboxOut;
+ /* 0x30 */
+#define PMC_CTRL_GP_FLASH_BOOT_STALL 0x00000080
+ uint32 gpOut;
+ uint32 gpIn;
+ uint32 gpInIrqMask;
+ uint32 gpInIrqStatus;
+ /* 0x40 */
+ uint32 dmaCtrl;
+ uint32 dmaStatus;
+ uint32 dma0_3FifoStatus;
+ uint32 unused0[3]; /* 0x4c-0x57 */
+ /* 0x58 */
+ uint32 l1IrqMips1Mask;
+ uint32 diagControl;
+ /* 0x60 */
+ uint32 diagHigh;
+ uint32 diagLow;
+ uint32 badAddr;
+ uint32 addr1WndwMask;
+ /* 0x70 */
+ uint32 addr1WndwBaseIn;
+ uint32 addr1WndwBaseOut;
+ uint32 addr2WndwMask;
+ uint32 addr2WndwBaseIn;
+ /* 0x80 */
+ uint32 addr2WndwBaseOut;
+ uint32 scratch;
+ uint32 tm;
+ uint32 softResets;
+ /* 0x90 */
+ uint32 eb2ubusTimeout;
+ uint32 m4keCoreStatus;
+ uint32 gpInIrqSense;
+ uint32 ubSlaveTimeout;
+ /* 0xa0 */
+ uint32 diagEn;
+ uint32 devTimeout;
+ uint32 ubusErrorOutMask;
+ uint32 diagCaptStopMask;
+ /* 0xb0 */
+ uint32 revId;
+ uint32 gpTmr2Ctl;
+ uint32 gpTmr2Cnt;
+ uint32 legacyMode;
+ /* 0xc0 */
+ uint32 smisbMonitor;
+ uint32 diagCtrl;
+ uint32 diagStat;
+ uint32 diagMask;
+ /* 0xd0 */
+ uint32 diagRslt;
+ uint32 diagCmp;
+ uint32 diagCapt;
+ uint32 diagCnt;
+ /* 0xe0 */
+ uint32 diagEdgeCnt;
+ uint32 unused1[4]; /* 0xe4-0xf3 */
+ /* 0xf4 */
+ uint32 iopPeriphBaseAddr;
+ uint32 lfsr;
+ uint32 unused2; /* 0xfc-0xff */
+} PmcCtrlReg;
+
+typedef struct PmcOutFifoReg {
+ uint32 msgCtrl; /* 0x00 */
+ uint32 msgSts; /* 0x04 */
+ uint32 unused[14]; /* 0x08-0x3f */
+ uint32 msgData[16]; /* 0x40-0x7c */
+} PmcOutFifoReg;
+
+typedef struct PmcInFifoReg {
+ uint32 msgCtrl; /* 0x00 */
+ uint32 msgSts; /* 0x04 */
+ uint32 unused[13]; /* 0x08-0x3b */
+ uint32 msgLast; /* 0x3c */
+ uint32 msgData[16]; /* 0x40-0x7c */
+} PmcInFifoReg;
+
+typedef struct PmcDmaReg {
+ /* 0x00 */
+ uint32 src;
+ uint32 dest;
+ uint32 cmdList;
+ uint32 lenCtl;
+ /* 0x10 */
+ uint32 rsltSrc;
+ uint32 rsltDest;
+ uint32 rsltHcs;
+ uint32 rsltLenStat;
+} PmcDmaReg;
+
+typedef struct PmcTokenReg {
+ /* 0x00 */
+ uint32 bufSize;
+ uint32 bufBase;
+ uint32 idx2ptrIdx;
+ uint32 idx2ptrPtr;
+ /* 0x10 */
+ uint32 unused[2];
+ uint32 bufSize2;
+} PmcTokenReg;
+
+typedef struct PmcPerfPowReg {
+ /* 0x00 */
+ uint32 dcacheHit;
+ uint32 dcacheMiss;
+ uint32 icacheHit;
+ uint32 icacheMiss;
+ /* 0x10 */
+ uint32 instnComplete;
+ uint32 wtbMerge;
+ uint32 wtbNoMerge;
+ uint32 itlbHit;
+ /* 0x20 */
+ uint32 itlbMiss;
+ uint32 dtlbHit;
+ uint32 dtlbMiss;
+ uint32 jtlbHit;
+ /* 0x30 */
+ uint32 jtlbMiss;
+ uint32 powerSubZone;
+ uint32 powerMemPda;
+ uint32 freqScalarCtrl;
+ /* 0x40 */
+ uint32 freqScalarMask;
+} PmcPerfPowReg;
+
+typedef struct PmcDQMReg {
+ /* 0x00 */
+ uint32 cfg;
+ uint32 _4keLowWtmkIrqMask;
+ uint32 mipsLowWtmkIrqMask;
+ uint32 lowWtmkIrqMask;
+ /* 0x10 */
+ uint32 _4keNotEmptyIrqMask;
+ uint32 mipsNotEmptyIrqMask;
+ uint32 notEmptyIrqSts;
+ uint32 queueRst;
+ /* 0x20 */
+ uint32 notEmptySts;
+ uint32 nextAvailMask;
+ uint32 nextAvailQueue;
+ uint32 mips1LowWtmkIrqMask;
+ /* 0x30 */
+ uint32 mips1NotEmptyIrqMask;
+ uint32 autoSrcPidInsert;
+} PmcDQMReg;
+
+typedef struct PmcCntReg {
+ uint32 cntr[10];
+ uint32 unused[6]; /* 0x28-0x3f */
+ uint32 cntrIrqMask;
+ uint32 cntrIrqSts;
+} PmcCntReg;
+
+typedef struct PmcDqmQCtrlReg {
+ uint32 size;
+ uint32 cfga;
+ uint32 cfgb;
+ uint32 cfgc;
+} PmcDqmQCtrlReg;
+
+typedef struct PmcDqmQDataReg {
+ uint32 word[4];
+} PmcDqmQDataReg;
+
+typedef struct PmcDqmQMibReg {
+ uint32 qNumFull[32];
+ uint32 qNumEmpty[32];
+ uint32 qNumPushed[32];
+} PmcDqmQMibReg;
+
+typedef struct Pmc {
+ uint32 baseReserved; /* 0x0000 */
+ uint32 unused0[1023];
+ PmcCtrlReg ctrl; /* 0x1000 */
+
+ PmcOutFifoReg outFifo; /* 0x1100 */
+ uint32 unused1[32]; /* 0x1180-0x11ff */
+ PmcInFifoReg inFifo; /* 0x1200 */
+ uint32 unused2[32]; /* 0x1280-0x12ff */
+
+ PmcDmaReg dma[2]; /* 0x1300 */
+ uint32 unused3[48]; /* 0x1340-0x13ff */
+
+ PmcTokenReg token; /* 0x1400 */
+ uint32 unused4[121]; /* 0x141c-0x15ff */
+
+ PmcPerfPowReg perfPower; /* 0x1600 */
+ uint32 unused5[47]; /* 0x1644-0x16ff */
+
+ uint32 msgId[32]; /* 0x1700 */
+ uint32 unused6[32]; /* 0x1780-0x17ff */
+
+ PmcDQMReg dqm; /* 0x1800 */
+ uint32 unused7[50]; /* 0x1838-0x18ff */
+
+ PmcCntReg hwCounter; /* 0x1900 */
+ uint32 unused8[46]; /* 0x1948-0x19ff */
+
+ PmcDqmQCtrlReg dqmQCtrl[32]; /* 0x1a00 */
+ PmcDqmQDataReg dqmQData[32]; /* 0x1c00 */
+ uint32 unused9[64]; /* 0x1e00-0x1eff */
+
+ uint32 qStatus[32]; /* 0x1f00 */
+ uint32 unused10[32]; /* 0x1f80-0x1fff */
+
+ PmcDqmQMibReg qMib; /* 0x2000 */
+ uint32 unused11[1952]; /* 0x2180-0x3ffff */
+
+ uint32 sharedMem[512]; /* 0x4000-0x47ff */
+} Pmc;
+
+#define PMC ((volatile Pmc * const) PMC_BASE)
+
+/*
+ * Process Monitor Module
+ */
+typedef struct PMRingOscillatorControl {
+ uint32 control;
+ uint32 en_lo;
+ uint32 en_mid;
+ uint32 en_hi;
+ uint32 idle_lo;
+ uint32 idle_mid;
+ uint32 idle_hi;
+} PMRingOscillatorControl;
+
+#define RCAL_0P25UM_HORZ 0
+#define RCAL_0P25UM_VERT 1
+#define RCAL_0P5UM_HORZ 2
+#define RCAL_0P5UM_VERT 3
+#define RCAL_1UM_HORZ 4
+#define RCAL_1UM_VERT 5
+#define PMMISC_RMON_EXT_REG ((RCAL_1UM_VERT + 1)/2)
+#define PMMISC_RMON_VALID_MASK (0x1<<16)
+typedef struct PMMiscControl {
+ uint32 gp_out;
+ uint32 clock_select;
+ uint32 unused[2];
+ uint32 misc[4];
+} PMMiscControl;
+
+typedef struct PMSSBMasterControl {
+ uint32 control;
+#define PMC_SSBM_CONTROL_SSB_START (1<<15)
+#define PMC_SSBM_CONTROL_SSB_ADPRE (1<<13)
+#define PMC_SSBM_CONTROL_SSB_EN (1<<12)
+#define PMC_SSBM_CONTROL_SSB_CMD_SHIFT (10)
+#define PMC_SSBM_CONTROL_SSB_CMD_MASK (0x3 << PMC_SSBM_CONTROL_SSB_CMD_SHIFT)
+#define PMC_SSBM_CONTROL_SSB_CMD_READ (2)
+#define PMC_SSBM_CONTROL_SSB_CMD_WRITE (1)
+#define PMC_SSBM_CONTROL_SSB_ADDR_SHIFT (0)
+#define PMC_SSBM_CONTROL_SSB_ADDR_MASK (0x3ff << PMC_SSBM_CONTROL_SSB_ADDR_SHIFT)
+ uint32 wr_data;
+ uint32 rd_data;
+} PMSSBMasterControl;
+
+typedef struct PMEctrControl {
+ uint32 control;
+ uint32 interval;
+ uint32 thresh_lo;
+ uint32 thresh_hi;
+ uint32 count;
+} PMEctrControl;
+
+typedef struct PMBMaster {
+ uint32 ctrl;
+#define PMC_PMBM_START (1 << 31)
+#define PMC_PMBM_TIMEOUT (1 << 30)
+#define PMC_PMBM_SLAVE_ERR (1 << 29)
+#define PMC_PMBM_BUSY (1 << 28)
+#define PMC_PMBM_Read (0 << 20)
+#define PMC_PMBM_Write (1 << 20)
+ uint32 wr_data;
+ uint32 timeout;
+ uint32 rd_data;
+ uint32 unused[4];
+} PMBMaster;
+
+typedef struct PMAPVTMONControl {
+ uint32 control;
+ uint32 reserved;
+ uint32 cfg_lo;
+ uint32 cfg_hi;
+ uint32 data;
+ uint32 vref_data;
+ uint32 unused[2];
+ uint32 ascan_cfg;
+ uint32 warn_temp;
+ uint32 reset_temp;
+ uint32 temp_value;
+ uint32 data1_value;
+ uint32 data2_value;
+ uint32 data3_value;
+} PMAPVTMONControl;
+
+typedef struct PMUBUSCfg {
+ uint32 window[8];
+ uint32 control;
+} PMUBUSCfg;
+
+typedef struct ProcessMonitorRegs {
+ uint32 MonitorCtrl; /* 0x00 */
+ uint32 unused0[7];
+ PMRingOscillatorControl ROSC; /* 0x20 */
+ uint32 unused1;
+ PMMiscControl Misc; /* 0x40 */
+ PMSSBMasterControl SSBMaster; /* 0x60 */
+ uint32 unused2[5];
+ PMEctrControl Ectr; /* 0x80 */
+ uint32 unused3[11];
+ PMBMaster PMBM[2]; /* 0xc0 */
+ PMAPVTMONControl APvtmonCtrl; /* 0x100 */
+ uint32 unused4[9];
+ PMUBUSCfg UBUSCfg; /* 0x160 */
+} ProcessMonitorRegs;
+
+#define PROCMON ((volatile ProcessMonitorRegs * const) PROC_MON_BASE)
+
+/*
+ * URB UBUS RBUS Block register
+ */
+typedef struct BIUArchRegion {
+ uint32 addr_ulimit;
+ uint32 addr_llimit;
+ uint32 permission;
+ uint32 access_right_ctrl;
+} BIUArchRegion;
+
+typedef struct BIUArch {
+ BIUArchRegion region[8]; /* 0x0 */
+ uint32 unused[95]; /* 0x80 */
+ uint32 scratch; /* 0x1fc */
+} BIUArch;
+
+#define BIUARCH ((volatile BIUArch * const) BIUARCH_BASE)
+
+typedef struct BIUCpuBusRange {
+#define ULIMIT_SHIFT 4
+#define BUSNUM_MASK 0x0000000FU
+
+#define BUSNUM_UBUS 1
+#define BUSNUM_RBUS 2
+#define BUSNUM_RSVD 3
+#define BUSNUM_MCP0 4
+#define BUSNUM_MCP1 5
+#define BUSNUM_MCP2 6
+
+ uint32 ulimit;
+ uint32 llimit;
+} BIUCpuBusRange;
+
+typedef struct BIUCpuAccessRightViol {
+ uint32 addr;
+ uint32 upper_addr;
+ uint32 detail_addr;
+} BIUCpuAccessRightViol;
+
+typedef struct BIUCpuBPCMAVS {
+ uint32 bpcm_id;
+ uint32 bpcm_capability;
+} BIUCpuBPCMAVS;
+
+typedef struct BIUCtrl {
+ BIUCpuBusRange bus_range[11]; /* 0x0 */
+ uint32 secure_reset_hndshake;
+ uint32 secure_soft_reset;
+ BIUCpuAccessRightViol access_right_viol[2]; /* 0x60 */
+ uint32 rac_cfg0;
+ uint32 rac_cfg1;
+ uint32 rac_cfg2; /* 0x80 */
+ uint32 rac_flush;
+ uint32 power_cfg;
+#define BIU_CPU_CTRL_PWR_CFG_CPU0_BPCM_INIT_ON_SHIFT 4
+#define BIU_CPU_CTRL_PWR_CFG_CPU0_BPCM_INIT_ON (0x1<<BIU_CPU_CTRL_PWR_CFG_CPU0_BPCM_INIT_ON_SHIFT)
+ uint32 reset_cfg;
+#define BIU_CPU_CTRL_RST_CFG_CPU0_RESET_SHIFT 0
+#define BIU_CPU_CTRL_RST_CFG_CPU0_RESET (0x1<<BIU_CPU_CTRL_RST_CFG_CPU0_RESET_SHIFT)
+ uint32 clock_cfg; /* 0x90 */
+#define BIU_CPU_CTRL_CLK_CFG_CCI_CLK_RATIO_SHIFT 8
+#define BIU_CPU_CTRL_CLK_CFG_CCI_CLK_RATIO_MASK (0xf<<BIU_CPU_CTRL_CLK_CFG_CCI_CLK_RATIO_SHIFT)
+#define BIU_CPU_CTRL_CLK_CFG_CCI_CLK_RATIO_DIV1 (0<<BIU_CPU_CTRL_CLK_CFG_CCI_CLK_RATIO_SHIFT)
+#define BIU_CPU_CTRL_CLK_CFG_CCI_CLK_RATIO_DIV2 (1<<BIU_CPU_CTRL_CLK_CFG_CCI_CLK_RATIO_SHIFT)
+#define BIU_CPU_CTRL_CLK_CFG_CCI_CLK_RATIO_DIV3 (2<<BIU_CPU_CTRL_CLK_CFG_CCI_CLK_RATIO_SHIFT)
+#define BIU_CPU_CTRL_CLK_CFG_CCI_CLK_RATIO_DIV4 (3<<BIU_CPU_CTRL_CLK_CFG_CCI_CLK_RATIO_SHIFT)
+#define BIU_CPU_CTRL_CLK_CFG_SAFE_CLOCK_MODE_SHIFT 4
+#define BIU_CPU_CTRL_CLK_CFG_SAFE_CLOCK_MODE_MASK (1<<BIU_CPU_CTRL_CLK_CFG_SAFE_CLOCK_MODE_SHIFT)
+#define BIU_CPU_CTRL_CLK_CFG_CLK_RATIO_SHIFT 0
+#define BIU_CPU_CTRL_CLK_CFG_CLK_RATIO_MASK (0xf<<BIU_CPU_CTRL_CLK_CFG_CLK_RATIO_SHIFT)
+#define BIU_CPU_CTRL_CLK_CFG_CLK_RATIO_DIV1 (0<<BIU_CPU_CTRL_CLK_CFG_CLK_RATIO_SHIFT)
+#define BIU_CPU_CTRL_CLK_CFG_CLK_RATIO_DIV2 (1<<BIU_CPU_CTRL_CLK_CFG_CLK_RATIO_SHIFT)
+#define BIU_CPU_CTRL_CLK_CFG_CLK_RATIO_DIV4 (2<<BIU_CPU_CTRL_CLK_CFG_CLK_RATIO_SHIFT)
+#define BIU_CPU_CTRL_CLK_CFG_CLK_RATIO_DIV8 (3<<BIU_CPU_CTRL_CLK_CFG_CLK_RATIO_SHIFT)
+#define BIU_CPU_CTRL_CLK_CFG_CLK_RATIO_DIV16 (4<<BIU_CPU_CTRL_CLK_CFG_CLK_RATIO_SHIFT)
+ uint32 cluster_clk_ctrl[2];
+ uint32 cluster_clk_pattern[2];
+ uint32 cluster_clk_ramp[2];
+ uint32 misc_cfg;
+ uint32 credit; /* 0xb0 */
+ uint32 mcp_flow;
+ uint32 periphbase_gic;
+ uint32 periphbase_gic_web;
+ uint32 wfx_state; /* 0xc0 */
+ uint32 cpu_pwr_zone_ctrl[8];
+#define BIU_CPU_CTRL_PWR_ZONE_CTRL_ZONE_RESET_SHIFT 31
+#define BIU_CPU_CTRL_PWR_ZONE_CTRL_ZONE_RESET (1<<BIU_CPU_CTRL_PWR_ZONE_CTRL_ZONE_RESET_SHIFT)
+#define BIU_CPU_CTRL_PWR_ZONE_CTRL_PWR_UP_REQ_SHIFT 10
+#define BIU_CPU_CTRL_PWR_ZONE_CTRL_PWR_UP_REQ (1<<BIU_CPU_CTRL_PWR_ZONE_CTRL_PWR_UP_REQ_SHIFT)
+#define BIU_CPU_CTRL_PWR_ZONE_CTRL_PWR_DN_REQ_SHIFT 9
+#define BIU_CPU_CTRL_PWR_ZONE_CTRL_PWR_DN_REQ (1<<BIU_CPU_CTRL_PWR_ZONE_CTRL_PWR_DN_REQ_SHIFT)
+ uint32 cpu_pwr_zone_cfg1[8];
+ uint32 cpu_pwr_zone_cfg2[8];
+ uint32 c0l2_pwr_zone_ctrl; /* 0x124 */
+ uint32 c0l2_pwr_zone_cfg1;
+ uint32 c0l2_pwr_zone_cfg2;
+ uint32 c1l2_pwr_zone_ctrl;
+ uint32 c1l2_pwr_zone_cfg1;
+ uint32 c1l2_pwr_zone_cfg2;
+ uint32 sysif_pwr_zone_ctrl;
+ uint32 sysif_pwr_zone_cfg1;
+ uint32 sysif_pwr_zone_cfg2;
+ BIUCpuBPCMAVS cpu_bpcm_avs[8]; /* 0x148 */
+ BIUCpuBPCMAVS l2biu_bpcm_avs[3]; /* 0x188 */
+ uint32 therm_throttle_temp; /* 0x1a0 */
+ uint32 term_throttle_irq_cfg;
+ uint32 therm_irq_high;
+ uint32 therm_irq_low;
+ uint32 therm_misc_threshold; /* 0x1b0 */
+ uint32 therm_irq_misc;
+ uint32 defeature;
+ uint32 defeature2;
+ uint32 defeature_key; /* 0x1c0 */
+ uint32 debug_rom_addr;
+ uint32 debug_tracectrl;
+ uint32 axi_cfg;
+ uint32 revision; /* 0x1d0 */
+ uint32 patchlevel;
+ uint32 ubus_cfg; /* 0x1d8 */
+ uint32 ubus_cfg_window[8];
+ uint32 power_state;
+ uint32 phys_config; /* 0x200 */
+ uint32 unused[126]; /* 0x204 */
+ uint32 scratch; /* 0x3fc */
+} BIUCtrl;
+
+#define BIUCTRL ((volatile BIUCtrl * const) BIUCTRL_BASE)
+
+typedef struct URB_Ctrl {
+ uint32 unused0[1024]; /* 0x0000 */
+ BIUArch arch; /* 0x1000 */
+ uint32 unused1[896]; /* 0x1200 */
+ BIUCtrl cpu_ctrl; /* 0x2000 */
+} URB_Ctrl;
+
+#define URB_CTRL ((volatile URB_Ctrl *const) URB_BASE)
+
+#endif /* __ASSEMBLER__ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/4912_map_part.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/4912_map_part.h
new file mode 100755
index 0000000000..fe519fa85a
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/4912_map_part.h
@@ -0,0 +1,497 @@
+/*
+<:copyright-BRCM:2019:DUAL/GPL:standard
+
+ Copyright (c) 2019 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+*/
+
+#ifndef __BCM4912_MAP_PART_H
+#define __BCM4912_MAP_PART_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "bcmtypes.h"
+
+#define MEMC_PHYS_BASE 0x80040000 /* MC2 TOP */
+#define MEMC_SIZE 0x00040000
+
+#define PMC_PHYS_BASE 0xffa00000
+#define PMC_SIZE 0x00200000
+#define PMC_OFFSET 0x00100000
+#define PROC_MON_OFFSET 0x00100000
+#define PMB_OFFSET 0x00120100
+
+
+/* Perf block base address and size */
+#define PERF_PHYS_BASE 0xff800000
+#define PERF_SIZE 0x3500
+#define TIMR_OFFSET 0x0400 /* 64 bit timer registers */
+#define WDTIMR0_OFFSET 0x0480
+#define WDTIMR1_OFFSET 0x04c0
+
+
+#define BIUCFG_PHYS_BASE 0x81060000
+#define BIUCFG_SIZE 0x3000
+#define BIUCFG_OFFSET 0x0000
+
+#define GIC_PHYS_BASE 0x81000000
+#define GIC_SIZE 0x10000
+#define GIC_OFFSET 0x0000
+#define GICD_OFFSET 0x1000
+#define GICC_OFFSET 0x2000
+
+#define PMC_BASE (PMC_PHYS_BASE + PMC_OFFSET)
+#define PROC_MON_BASE (PMC_PHYS_BASE + PROC_MON_OFFSET)
+#define PMB_BASE (PMC_PHYS_BASE+ PMB_OFFSET)
+#define BIUCFG_BASE (BIUCFG_PHYS_BASE + BIUCFG_OFFSET)
+#define WDTIMR0_BASE (PERF_PHYS_BASE + WDTIMR0_OFFSET)
+
+#ifndef __ASSEMBLER__
+/*
+ * Power Management Control
+ */
+typedef struct PmcCtrlReg {
+ uint32 gpTmr0Ctl; /* 0x018 */
+ uint32 gpTmr0Cnt; /* 0x01c */
+ uint32 gpTmr1Ctl; /* 0x020 */
+ uint32 gpTmr1Cnt; /* 0x024 */
+ uint32 hostMboxIn; /* 0x028 */
+ uint32 hostMboxOut; /* 0x02c */
+ uint32 reserved[4]; /* 0x030 */
+ uint32 dmaCtrl; /* 0x040 */
+ uint32 dmaStatus; /* 0x044 */
+ uint32 dma0_3FifoStatus; /* 0x048 */
+ uint32 reserved1[4]; /* 0x04c */
+ uint32 diagControl; /* 0x05c */
+ uint32 diagHigh; /* 0x060 */
+ uint32 diagLow; /* 0x064 */
+ uint32 reserved8; /* 0x068 */
+ uint32 addr1WndwMask; /* 0x06c */
+ uint32 addr1WndwBaseIn; /* 0x070 */
+ uint32 addr1WndwBaseOut; /* 0x074 */
+ uint32 addr2WndwMask; /* 0x078 */
+ uint32 addr2WndwBaseIn; /* 0x07c */
+ uint32 addr2WndwBaseOut; /* 0x080 */
+ uint32 scratch; /* 0x084 */
+ uint32 reserved9; /* 0x088 */
+ uint32 softResets; /* 0x08c */
+ uint32 reserved2; /* 0x090 */
+ uint32 m4keCoreStatus; /* 0x094 */
+ uint32 reserved3; /* 0x098 */
+ uint32 ubSlaveTimeout; /* 0x09c */
+ uint32 diagEn; /* 0x0a0 */
+ uint32 devTimeout; /* 0x0a4 */
+ uint32 ubusErrorOutMask; /* 0x0a8 */
+ uint32 diagCaptStopMask; /* 0x0ac */
+ uint32 revId; /* 0x0b0 */
+ uint32 reserved4[4]; /* 0x0b4 */
+ uint32 diagCtrl; /* 0x0c4 */
+ uint32 diagStat; /* 0x0c8 */
+ uint32 diagMask; /* 0x0cc */
+ uint32 diagRslt; /* 0x0d0 */
+ uint32 diagCmp; /* 0x0d4 */
+ uint32 diagCapt; /* 0x0d8 */
+ uint32 diagCnt; /* 0x0dc */
+ uint32 diagEdgeCnt; /* 0x0e0 */
+ uint32 reserved5[4]; /* 0x0e4 */
+ uint32 smisc_bus_config; /* 0x0f4 */
+ uint32 lfsr; /* 0x0f8 */
+ uint32 dqm_pac_lock; /* 0x0fc */
+ uint32 l1_irq_4ke_mask; /* 0x100 */
+ uint32 l1_irq_4ke_status; /* 0x104 */
+ uint32 l1_irq_mips_mask; /* 0x108 */
+ uint32 l1_irq_mips_status; /* 0x10c */
+ uint32 l1_irq_mips1_mask; /* 0x110 */
+ uint32 reserved6[3]; /* 0x114 */
+ uint32 l2_irq_gp_mask; /* 0x120 */
+ uint32 l2_irq_gp_status; /* 0x124 */
+ uint32 l2_irq_gp_set; /* 0x128 */
+ uint32 reserved7; /* 0x12c */
+ uint32 gp_in_irq_mask; /* 0x130 */
+ uint32 gp_in_irq_status; /* 0x134 */
+ uint32 gp_in_irq_set; /* 0x138 */
+ uint32 gp_in_irq_sense; /* 0x13c */
+ uint32 gp_in; /* 0x140 */
+ uint32 gp_out; /* 0x144 */
+} PmcCtrlReg;
+
+typedef struct PmcDmaReg {
+ /* 0x00 */
+ uint32 src;
+ uint32 dest;
+ uint32 cmdList;
+ uint32 lenCtl;
+ /* 0x10 */
+ uint32 rsltSrc;
+ uint32 rsltDest;
+ uint32 rsltHcs;
+ uint32 rsltLenStat;
+} PmcDmaReg;
+
+typedef struct PmcTokenReg {
+ /* 0x00 */
+ uint32 bufSize;
+ uint32 bufBase;
+ uint32 idx2ptrIdx;
+ uint32 idx2ptrPtr;
+ /* 0x10 */
+ uint32 unused[2];
+ uint32 bufSize2;
+} PmcTokenReg;
+
+typedef struct PmcPerfPowReg {
+ uint32 freqScalarCtrl; /* 0x3c */
+ uint32 freqScalarMask; /* 0x40 */
+} PmcPerfPowReg;
+
+typedef struct PmcDQMPac {
+ uint32 dqmPac[32];
+} PmcDQMPac;
+
+typedef struct PmcDQMReg {
+ uint32 cfg; /* 0x1c00 */
+ uint32 _4keLowWtmkIrqMask; /* 0x1c04 */
+ uint32 mipsLowWtmkIrqMask; /* 0x1c08 */
+ uint32 lowWtmkIrqMask; /* 0x1c0c */
+ uint32 _4keNotEmptyIrqMask; /* 0x1c10 */
+ uint32 mipsNotEmptyIrqMask; /* 0x1c14 */
+ uint32 notEmptyIrqSts; /* 0x1c18 */
+ uint32 queueRst; /* 0x1c1c */
+ uint32 notEmptySts; /* 0x1c20 */
+ uint32 nextAvailMask; /* 0x1c24 */
+ uint32 nextAvailQueue; /* 0x1c28 */
+ uint32 mips1LowWtmkIrqMask; /* 0x1c2c */
+ uint32 mips1NotEmptyIrqMask; /* 0x1c30 */
+ uint32 autoSrcPidInsert; /* 0x1c34 */
+ uint32 timerIrqStatus; /* 0x1c38 */
+ uint32 timerStatus; /* 0x1c3c */
+ uint32 _4keTimerIrqMask; /* 0x1c40 */
+ uint32 mipsTimerIrqMask; /* 0x1c44 */
+ uint32 mips1TimerIrqMask; /* 0x1c48 */
+} PmcDQMReg;
+
+typedef struct PmcCntReg {
+ uint32 cntr[10];
+ uint32 unused[6]; /* 0x28-0x3f */
+ uint32 cntrIrqMask;
+ uint32 cntrIrqSts;
+} PmcCntReg;
+
+typedef struct PmcDqmQCtrlReg {
+ uint32 size;
+ uint32 cfga;
+ uint32 cfgb;
+ uint32 cfgc;
+} PmcDqmQCtrlReg;
+
+typedef struct PmcDqmQDataReg {
+ uint32 word[4];
+} PmcDqmQDataReg;
+
+typedef struct PmcDqmQMibReg {
+ uint32 qNumFull[32];
+ uint32 qNumEmpty[32];
+ uint32 qNumPushed[32];
+} PmcDqmQMibReg;
+
+typedef struct SSBMaster {
+ uint32 ssbmControl; /* 0x0060 */
+ uint32 ssbmWrData; /* 0x0064 */
+ uint32 ssbmRdData; /* 0x0068 */
+ uint32 ssbmStatus; /* 0x006c */
+} SSBMaster;
+
+typedef struct PmmReg {
+ uint32 memPowerCtrl; /* 0x0000 */
+ uint32 regSecurityConfig; /* 0x0004 */
+} PmmReg;
+
+typedef struct keyholeReg {
+ uint32 ctrlSts;
+ uint32 wrData;
+ uint32 mutex;
+ uint32 rdData;
+} keyholeReg;
+
+typedef struct PmbBus {
+ uint32 config; /* 0x0100 */
+ uint32 arbiter; /* 0x0104 */
+ uint32 timeout; /* 0x0108 */
+ uint32 unused1; /* 0x010c */
+ keyholeReg keyhole[4]; /* 0x0110-0x014f */
+ uint32 unused2[44]; /* 0x0150-0x01ff */
+ uint32 map[64]; /* 0x0200-0x02ff */
+}PmbBus;
+
+typedef struct CoreCtrl {
+ uint32 coreEnable; /* 0x0400 */
+ uint32 autoresetControl; /* 0x0404 */
+ uint32 coreIdle; /* 0x0408 */
+ uint32 coreResetCause; /* 0x040c */
+ uint32 memPwrDownCtrl0; /* 0x0410 */
+ uint32 memPwrDownSts0; /* 0x0414 */
+ uint32 memPwrDownCtrl1; /* 0x0418 */
+ uint32 memPwrDownSts1; /* 0x041c */
+ uint32 sysFlg0Status; /* 0x0420 */
+ uint32 sysFlg0Set; /* 0x0424 */
+ uint32 sysFlg0Clear; /* 0x0428 */
+ uint32 unused1; /* 0x042c */
+ uint32 usrFlg0Status; /* 0x0430 */
+ uint32 usrFlg0Set; /* 0x0434 */
+ uint32 usrFlg0Clear; /* 0x0438 */
+ uint32 unused2; /* 0x043c */
+ uint32 subsystemRev; /* 0x0440 */
+ uint32 resetVector; /* 0x0444 */
+} CoreCtrl;
+
+typedef struct CoreState {
+ uint32 sysMbx[8]; /* 0x0480 */
+ uint32 usrMbx[8]; /* 0x04a0 */
+ uint32 sysMtx[4]; /* 0x04c0 */
+ uint32 usrMtx[8]; /* 0x04d0 */
+} CoreState;
+
+typedef struct CoreIntr {
+ uint32 irqStatus; /* 0x0500 */
+ uint32 irqSet; /* 0x0504 */
+ uint32 irqClear; /* 0x0508 */
+ uint32 unused1; /* 0x050c */
+ uint32 srqStatus; /* 0x0510 */
+ uint32 srqSet; /* 0x0514 */
+ uint32 srqClear; /* 0x0518 */
+ uint32 unused2; /* 0x051c */
+ uint32 drqStatus; /* 0x0520 */
+ uint32 drqSet; /* 0x0524 */
+ uint32 drqClear; /* 0x0528 */
+ uint32 unused3; /* 0x052c */
+ uint32 frqStatus; /* 0x0530 */
+ uint32 frqSet; /* 0x0534 */
+ uint32 frqClear; /* 0x0538 */
+ uint32 unused4; /* 0x053c */
+ uint32 hostIrqLatched; /* 0x0540 */
+ uint32 hostIrqSet; /* 0x0544 */
+ uint32 hostIrqClear; /* 0x0548 */
+ uint32 hostIrqEnable; /* 0x054c */
+ uint32 obusFaultStatus; /* 0x0550 */
+ uint32 obusFaultClear; /* 0x0554 */
+ uint32 obusFaultAddr; /* 0x0558 */
+} CoreIntr;
+
+typedef struct CoreProfile {
+ uint32 mutex; /* 0x0580 */
+ uint32 lastConfPcLo; /* 0x0584 */
+ uint32 lastConfPcHi; /* 0x0588 */
+ uint32 lastPcLo; /* 0x058c */
+ uint32 lastPcHi; /* 0x0590 */
+ uint32 braTargetPc0Lo; /* 0x0594 */
+ uint32 braTargetPc0Hi; /* 0x0598 */
+ uint32 braTargetPc1Lo; /* 0x059c */
+ uint32 braTargetPc1Hi; /* 0x05a0 */
+ uint32 braTargetPc2Lo; /* 0x05a4 */
+ uint32 braTargetPc2Hi; /* 0x05a8 */
+ uint32 braTargetPc3Lo; /* 0x05ac */
+ uint32 braTargetPc3Hi; /* 0x05b0 */
+ uint32 unused[3]; /* 0x05b4-0x05bf */
+ uint32 profSampleW[4]; /* 0x05c0 */
+} CoreProfile;
+
+typedef struct MaestroMisc {
+ CoreCtrl coreCtrl; /* 0x0400 */
+ uint32 unused1[14]; /* 0x0448-0x047f */
+ CoreState coreState; /* 0x0480 */
+ uint32 unused2[4]; /* 0x04f0-0x04ff */
+ CoreIntr interrupt; /* 0x0500 */
+ uint32 unused3[9]; /* 0x055c-0x057f */
+ CoreProfile profile; /* 0x0580 */
+} MaestroMisc;
+
+typedef struct Pmc {
+ uint32 unused0[1030];
+ PmcCtrlReg ctrl; /* 0x1018 */
+ uint32 unused1[622]; /* 0x1148-0x1cff */
+ PmcDQMPac dqmPac; /* 0x1b00 */
+ uint32 unused5[32]; /* 0x1b80-0x1bff */
+ PmcDQMReg dqm; /* 0x1c00 */
+ uint32 unused6[749]; /* 0x1c4c-0x27ff */
+ uint32 qStatus[32]; /* 0x2800 */
+ uint32 unused7[480]; /* 0x2880-0x2fff */
+ PmcDqmQMibReg qMib; /* 0x3000 */
+ uint32 unused8[928]; /* 0x3180-0x3fff */
+ PmcDqmQCtrlReg dqmQCtrl[8]; /* 0x4000 */
+ uint32 unused9[992]; /* 0x4080-0x4fff */
+ PmcDqmQDataReg dqmQData[8]; /* 0x5000 */
+} Pmc;
+#define PMC ((volatile Pmc * const) PMC_BASE)
+
+typedef struct Procmon {
+ uint32 unused00[256];
+ MaestroMisc maestroReg; /* 0x00400 */
+ uint32 unused10[32396]; /* 0x005d0-0x1ffff */
+ PmmReg pmm; /* 0x20000 */
+ uint32 unused11[22]; /* 0x20008-0x2005f */
+ SSBMaster ssbMasterCtrl; /* 0x20060 */
+ uint32 unused12[36]; /* 0x20070-0x200ff */
+ PmbBus pmb; /* 0x20100 */
+ uint32 unused13[32576]; /* 0x20300-0x3ffff */
+ uint32 qsm[128]; /* 0x40000-0x401ff */
+ uint32 unused14[65408]; /* 0x40200-0x7ffff */
+ uint32 dtcm[1024]; /* 0x80000-0x80fff */
+ uint32 unused15[64512]; /* 0x81000-0xbffff */
+ uint32 itcm[4096]; /* 0xc0000-0xc3fff */
+} Procmon;
+#define PROCMON ((volatile Procmon * const) PROC_MON_BASE)
+
+typedef struct PMSSBMasterControl {
+ uint32 control;
+ uint32 wr_data;
+ uint32 rd_data;
+} PMSSBMasterControl;
+
+typedef struct
+{
+ uint32 control;
+#define PMC_PMBM_START (1 << 31)
+#define PMC_PMBM_TIMEOUT (1 << 30)
+#define PMC_PMBM_SLAVE_ERR (1 << 29)
+#define PMC_PMBM_BUSY (1 << 28)
+#define PMC_PMBM_BUS_SHIFT (20)
+#define PMC_PMBM_Read (0 << 24)
+#define PMC_PMBM_Write (1 << 24)
+ uint32 wr_data;
+ uint32 mutex;
+ uint32 rd_data;
+} PMB_keyhole_reg;
+
+typedef struct PMBMaster {
+ uint32 config;
+#define PMB_NUM_REGS_SHIFT (20)
+#define PMB_NUM_REGS_MASK (0x3ff)
+ uint32 arbitger;
+ uint32 timeout;
+ uint32 reserved;
+ PMB_keyhole_reg keyhole[4];
+ uint32 reserved1[44];
+ uint32 map[64];
+} PMBMaster;
+#define PMB ((volatile PMBMaster * const) PMB_BASE)
+
+
+typedef struct WDTimer {
+ uint32 WatchDogDefCount;
+ /* Write 0xff00 0x00ff to Start timer
+ * Write 0xee00 0x00ee to Stop and re-load default count
+ * Read from this register returns current watch dog count
+ */
+ uint32 WatchDogCtl;
+
+ /* Number of 50-MHz ticks for WD Reset pulse to last */
+ uint32 WDResetCount;
+
+ uint32 SoftRst;
+#define SOFT_RESET 0x00000001
+ uint32 WDAccessCtl;
+} WDTimer;
+
+#define WDTIMER0 ((volatile WDTimer * const) WDTIMR0_BASE)
+
+
+typedef struct BIUCFG_Access {
+ uint32 permission; /* 0x0 */
+ uint32 sbox; /* 0x4 */
+ uint32 cpu_defeature; /* 0x8 */
+ uint32 dbg_security; /* 0xc */
+ uint32 rsvd1[32]; /* 0x10 - 0x8f */
+ uint64 violation[2]; /* 0x90 - 0x9f */
+ uint32 ts_access[2]; /* 0xa0 - 0xa7 */
+ uint32 rsvd2[22]; /* 0xa8 - 0xff */
+}BIUCFG_Access;
+
+typedef struct BIUCFG_Cluster {
+ uint32 permission; /* 0x0 */
+ uint32 config; /* 0x4 */
+ uint32 status; /* 0x8 */
+ uint32 control; /* 0xc */
+ uint32 cpucfg; /* 0x10 */
+ uint32 dbgrom; /* 0x14 */
+ uint32 rsvd1[2]; /* 0x18 - 0x1f */
+ uint64 rvbar_addr[4]; /* 0x20 - 0x3f */
+ uint32 rsvd2[48]; /* 0x40 - 0xff */
+}BIUCFG_Cluster;
+
+typedef struct BIUCFG_Bac {
+ uint32 bac_permission; /* 0x00 */
+ uint32 bac_periphbase; /* 0x04 */
+ uint32 rsvd[2]; /* 0x08 - 0x0f */
+ uint32 bac_event; /* 0x10 */
+ uint32 rsvd_1[3]; /* 0x14 - 0x1f */
+ uint32 bac_ccicfg; /* 0x20 */
+ uint32 bac_cciaddr; /* 0x24 */
+ uint32 rsvd_2[4]; /* 0x28 - 0x37 */
+ uint32 bac_ccievs2; /* 0x38 */
+ uint32 bac_ccievs3; /* 0x3c */
+ uint32 bac_ccievs4; /* 0x40 */
+ uint32 rsvd_3[3]; /* 0x44 - 0x4f */
+ uint32 bac_ccievm0; /* 0x50 */
+ uint32 bac_ccievm1; /* 0x54 */
+ uint32 rsvd_4[2]; /* 0x58 - 0x5f */
+ uint32 bac_dapapbcfg; /* 0x60 */
+ uint32 bac_status; /* 0x64 */
+ uint32 rsvd_5[2]; /* 0x68 - 0x6f */
+ uint32 cpu_therm_irq_cfg; /* 0x70 */
+ uint32 cpu_therm_threshold_cfg; /* 0x74 */
+ uint32 rsvd_6; /* 0x78 */
+ uint32 cpu_therm_temp; /* 0x7c */
+ uint32 rsvd_7[32]; /* 0x80 - 0xff */
+} BIUCFG_Bac;
+
+typedef struct BIUCFG_Aux {
+ uint32 aux_permission; /* 0x00 */
+ uint32 rsvd[3]; /* 0x04 - 0x0f */
+ uint32 c0_clk_control; /* 0x10 */
+ uint32 c0_clk_ramp; /* 0x14 */
+ uint32 c0_clk_pattern; /* 0x18 */
+ uint32 rsvd_1; /* 0x1c */
+ uint32 c1_clk_control; /* 0x20 */
+ uint32 c1_clk_ramp; /* 0x24 */
+ uint32 c1_clk_pattern; /* 0x28 */
+ uint32 rsvd_2[53]; /* 0x2c - 0xff */
+} BIUCFG_Aux;
+
+typedef struct BIUCFG {
+ BIUCFG_Access access; /* 0x0 - 0xff*/
+ BIUCFG_Cluster cluster[2]; /* 0x100 - 0x2ff*/
+ BIUCFG_Bac bac; /* 0x300 - 0x3ff */
+ uint32 anonymous[192]; /* 0x400 - 0x6ff */
+ BIUCFG_Aux aux; /* 0x700 - 0x7ff */
+ uint32 anonymous_1[2560]; /* 0x800 - 0x2fff */
+}BIUCFG;
+
+#define BIUCFG ((volatile BIUCFG * const) BIUCFG_BASE)
+
+
+#endif /* __ASSEMBLER__ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/63138_map_part.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/63138_map_part.h
new file mode 100644
index 0000000000..b6b1be564e
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/63138_map_part.h
@@ -0,0 +1,458 @@
+/*
+<:copyright-BRCM:2013:DUAL/GPL:standard
+
+ Copyright (c) 2013 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+*/
+
+#ifndef __BCM63138_MAP_PART_H
+#define __BCM63138_MAP_PART_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "bcmtypes.h"
+
+#define PER_BASE 0xfffe0000
+#define REG_BASE 0x80000000
+
+#define MEMC_PHYS_BASE (REG_BASE + 0x00002000) /* DDR IO Buf Control */
+#define MEMC_SIZE 0x20000
+
+#define PMC_PHYS_BASE (REG_BASE + 0x00400000)
+#define PROC_MON_PHYS_BASE (REG_BASE + 0x00480000)
+#define GICC_PHYS_BASE (REG_BASE + 0x0001e100)
+#define GICD_PHYS_BASE (REG_BASE + 0x0001f000)
+
+#define PERF_PHYS_BASE (PER_BASE + 0x00008000) /* chip control */
+#define TIMR_PHYS_BASE (PER_BASE + 0x00008080) /* timer registers */
+#define BOOTLUT_PHYS_BASE (PER_BASE + 0x00010000)
+
+#define PMC_BASE PMC_PHYS_BASE
+#define PROC_MON_BASE PROC_MON_PHYS_BASE
+#define TIMR_BASE TIMR_PHYS_BASE
+#define BOOTLUT_BASE BOOTLUT_PHYS_BASE
+#define GICC_BASE GICC_PHYS_BASE
+#define GICD_BASE GICD_PHYS_BASE
+
+
+#ifndef __ASSEMBLER__
+
+/*
+ * Power Management Control
+ */
+typedef struct PmcCtrlReg {
+ /* 0x00 */
+ uint32 l1Irq4keMask;
+ uint32 l1Irq4keStatus;
+ uint32 l1IrqMipsMask;
+ uint32 l1IrqMipsStatus;
+ /* 0x10 */
+ uint32 l2IrqGpMask;
+ uint32 l2IrqGpStatus;
+ uint32 gpTmr0Ctl;
+ uint32 gpTmr0Cnt;
+ /* 0x20 */
+ uint32 gpTmr1Ctl;
+ uint32 gpTmr1Cnt;
+ uint32 hostMboxIn;
+ uint32 hostMboxOut;
+ /* 0x30 */
+#define PMC_CTRL_GP_FLASH_BOOT_STALL 0x00000080
+ uint32 gpOut;
+ uint32 gpIn;
+ uint32 gpInIrqMask;
+ uint32 gpInIrqStatus;
+ /* 0x40 */
+ uint32 dmaCtrl;
+ uint32 dmaStatus;
+ uint32 dma0_3FifoStatus;
+ uint32 unused0[3]; /* 0x4c-0x57 */
+ /* 0x58 */
+ uint32 l1IrqMips1Mask;
+ uint32 diagControl;
+ /* 0x60 */
+ uint32 diagHigh;
+ uint32 diagLow;
+ uint32 badAddr;
+ uint32 addr1WndwMask;
+ /* 0x70 */
+ uint32 addr1WndwBaseIn;
+ uint32 addr1WndwBaseOut;
+ uint32 addr2WndwMask;
+ uint32 addr2WndwBaseIn;
+ /* 0x80 */
+ uint32 addr2WndwBaseOut;
+ uint32 scratch;
+ uint32 tm;
+ uint32 softResets;
+ /* 0x90 */
+ uint32 eb2ubusTimeout;
+ uint32 m4keCoreStatus;
+ uint32 gpInIrqSense;
+ uint32 ubSlaveTimeout;
+ /* 0xa0 */
+ uint32 diagEn;
+ uint32 devTimeout;
+ uint32 ubusErrorOutMask;
+ uint32 diagCaptStopMask;
+ /* 0xb0 */
+ uint32 revId;
+ uint32 gpTmr2Ctl;
+ uint32 gpTmr2Cnt;
+ uint32 legacyMode;
+ /* 0xc0 */
+ uint32 smisbMonitor;
+ uint32 diagCtrl;
+ uint32 diagStat;
+ uint32 diagMask;
+ /* 0xd0 */
+ uint32 diagRslt;
+ uint32 diagCmp;
+ uint32 diagCapt;
+ uint32 diagCnt;
+ /* 0xe0 */
+ uint32 diagEdgeCnt;
+ uint32 unused1[4]; /* 0xe4-0xf3 */
+ /* 0xf4 */
+ uint32 iopPeriphBaseAddr;
+ uint32 lfsr;
+ uint32 unused2; /* 0xfc-0xff */
+} PmcCtrlReg;
+
+typedef struct PmcOutFifoReg {
+ uint32 msgCtrl; /* 0x00 */
+ uint32 msgSts; /* 0x04 */
+ uint32 unused[14]; /* 0x08-0x3f */
+ uint32 msgData[16]; /* 0x40-0x7c */
+} PmcOutFifoReg;
+
+typedef struct PmcInFifoReg {
+ uint32 msgCtrl; /* 0x00 */
+ uint32 msgSts; /* 0x04 */
+ uint32 unused[13]; /* 0x08-0x3b */
+ uint32 msgLast; /* 0x3c */
+ uint32 msgData[16]; /* 0x40-0x7c */
+} PmcInFifoReg;
+
+typedef struct PmcDmaReg {
+ /* 0x00 */
+ uint32 src;
+ uint32 dest;
+ uint32 cmdList;
+ uint32 lenCtl;
+ /* 0x10 */
+ uint32 rsltSrc;
+ uint32 rsltDest;
+ uint32 rsltHcs;
+ uint32 rsltLenStat;
+} PmcDmaReg;
+
+typedef struct PmcTokenReg {
+ /* 0x00 */
+ uint32 bufSize;
+ uint32 bufBase;
+ uint32 idx2ptrIdx;
+ uint32 idx2ptrPtr;
+ /* 0x10 */
+ uint32 unused[2];
+ uint32 bufSize2;
+} PmcTokenReg;
+
+typedef struct PmcPerfPowReg {
+ /* 0x00 */
+ uint32 dcacheHit;
+ uint32 dcacheMiss;
+ uint32 icacheHit;
+ uint32 icacheMiss;
+ /* 0x10 */
+ uint32 instnComplete;
+ uint32 wtbMerge;
+ uint32 wtbNoMerge;
+ uint32 itlbHit;
+ /* 0x20 */
+ uint32 itlbMiss;
+ uint32 dtlbHit;
+ uint32 dtlbMiss;
+ uint32 jtlbHit;
+ /* 0x30 */
+ uint32 jtlbMiss;
+ uint32 powerSubZone;
+ uint32 powerMemPda;
+ uint32 freqScalarCtrl;
+ /* 0x40 */
+ uint32 freqScalarMask;
+} PmcPerfPowReg;
+
+typedef struct PmcDQMReg {
+ /* 0x00 */
+ uint32 cfg;
+ uint32 _4keLowWtmkIrqMask;
+ uint32 mipsLowWtmkIrqMask;
+ uint32 lowWtmkIrqMask;
+ /* 0x10 */
+ uint32 _4keNotEmptyIrqMask;
+ uint32 mipsNotEmptyIrqMask;
+ uint32 notEmptyIrqSts;
+ uint32 queueRst;
+ /* 0x20 */
+ uint32 notEmptySts;
+ uint32 nextAvailMask;
+ uint32 nextAvailQueue;
+ uint32 mips1LowWtmkIrqMask;
+ /* 0x30 */
+ uint32 mips1NotEmptyIrqMask;
+ uint32 autoSrcPidInsert;
+} PmcDQMReg;
+
+typedef struct PmcCntReg {
+ uint32 cntr[10];
+ uint32 unused[6]; /* 0x28-0x3f */
+ uint32 cntrIrqMask;
+ uint32 cntrIrqSts;
+} PmcCntReg;
+
+typedef struct PmcDqmQCtrlReg {
+ uint32 size;
+ uint32 cfga;
+ uint32 cfgb;
+ uint32 cfgc;
+} PmcDqmQCtrlReg;
+
+typedef struct PmcDqmQDataReg {
+ uint32 word[4];
+} PmcDqmQDataReg;
+
+typedef struct PmcDqmQMibReg {
+ uint32 qNumFull[32];
+ uint32 qNumEmpty[32];
+ uint32 qNumPushed[32];
+} PmcDqmQMibReg;
+
+typedef struct Pmc {
+ uint32 baseReserved; /* 0x0000 */
+ uint32 unused0[1023];
+ PmcCtrlReg ctrl; /* 0x1000 */
+
+ PmcOutFifoReg outFifo; /* 0x1100 */
+ uint32 unused1[32]; /* 0x1180-0x11ff */
+ PmcInFifoReg inFifo; /* 0x1200 */
+ uint32 unused2[32]; /* 0x1280-0x12ff */
+
+ PmcDmaReg dma[2]; /* 0x1300 */
+ uint32 unused3[48]; /* 0x1340-0x13ff */
+
+ PmcTokenReg token; /* 0x1400 */
+ uint32 unused4[121]; /* 0x141c-0x15ff */
+
+ PmcPerfPowReg perfPower; /* 0x1600 */
+ uint32 unused5[47]; /* 0x1644-0x16ff */
+
+ uint32 msgId[32]; /* 0x1700 */
+ uint32 unused6[32]; /* 0x1780-0x17ff */
+
+ PmcDQMReg dqm; /* 0x1800 */
+ uint32 unused7[50]; /* 0x1838-0x18ff */
+
+ PmcCntReg hwCounter; /* 0x1900 */
+ uint32 unused8[46]; /* 0x1948-0x19ff */
+
+ PmcDqmQCtrlReg dqmQCtrl[32]; /* 0x1a00 */
+ PmcDqmQDataReg dqmQData[32]; /* 0x1c00 */
+ uint32 unused9[64]; /* 0x1e00-0x1eff */
+
+ uint32 qStatus[32]; /* 0x1f00 */
+ uint32 unused10[32]; /* 0x1f80-0x1fff */
+
+ PmcDqmQMibReg qMib; /* 0x2000 */
+ uint32 unused11[1952]; /* 0x2180-0x3ffff */
+
+ uint32 sharedMem[8192]; /* 0x4000-0xbffc */
+} Pmc;
+
+#define PMC ((volatile Pmc * const) PMC_BASE)
+
+
+
+/*
+ * Process Monitor Module
+ */
+typedef struct PMRingOscillatorControl {
+ uint32 control;
+ uint32 en_lo;
+ uint32 en_mid;
+ uint32 en_hi;
+ uint32 idle_lo;
+ uint32 idle_mid;
+ uint32 idle_hi;
+} PMRingOscillatorControl;
+
+#define RCAL_0P25UM_HORZ 0
+#define RCAL_0P25UM_VERT 1
+#define RCAL_0P5UM_HORZ 2
+#define RCAL_0P5UM_VERT 3
+#define RCAL_1UM_HORZ 4
+#define RCAL_1UM_VERT 5
+#define PMMISC_RMON_EXT_REG ((RCAL_1UM_VERT + 1)/2)
+#define PMMISC_RMON_VALID_MASK (0x1<<16)
+typedef struct PMMiscControl {
+ uint32 gp_out;
+ uint32 clock_select;
+ uint32 unused[2];
+ uint32 misc[4];
+} PMMiscControl;
+
+typedef struct PMSSBMasterControl {
+ uint32 control;
+#define PMC_SSBM_CONTROL_SSB_START (1<<15)
+#define PMC_SSBM_CONTROL_SSB_ADPRE (1<<13)
+#define PMC_SSBM_CONTROL_SSB_EN (1<<12)
+#define PMC_SSBM_CONTROL_SSB_CMD_SHIFT (10)
+#define PMC_SSBM_CONTROL_SSB_CMD_MASK (0x3 << PMC_SSBM_CONTROL_SSB_CMD_SHIFT)
+#define PMC_SSBM_CONTROL_SSB_CMD_READ (2)
+#define PMC_SSBM_CONTROL_SSB_CMD_WRITE (1)
+#define PMC_SSBM_CONTROL_SSB_ADDR_SHIFT (0)
+#define PMC_SSBM_CONTROL_SSB_ADDR_MASK (0x3ff << PMC_SSBM_CONTROL_SSB_ADDR_SHIFT)
+ uint32 wr_data;
+ uint32 rd_data;
+} PMSSBMasterControl;
+
+typedef struct PMEctrControl {
+ uint32 control;
+ uint32 interval;
+ uint32 thresh_lo;
+ uint32 thresh_hi;
+ uint32 count;
+} PMEctrControl;
+
+typedef struct PMBMaster {
+ uint32 ctrl;
+#define PMC_PMBM_START (1 << 31)
+#define PMC_PMBM_TIMEOUT (1 << 30)
+#define PMC_PMBM_SLAVE_ERR (1 << 29)
+#define PMC_PMBM_BUSY (1 << 28)
+#define PMC_PMBM_Read (0 << 20)
+#define PMC_PMBM_Write (1 << 20)
+ uint32 wr_data;
+ uint32 timeout;
+ uint32 rd_data;
+ uint32 unused[4];
+} PMBMaster;
+
+typedef struct PMAPVTMONControl {
+ uint32 control;
+ uint32 reserved;
+ uint32 cfg_lo;
+ uint32 cfg_hi;
+ uint32 data;
+ uint32 vref_data;
+ uint32 unused[2];
+ uint32 ascan_cfg;
+ uint32 warn_temp;
+ uint32 reset_temp;
+ uint32 temp_value;
+ uint32 data1_value;
+ uint32 data2_value;
+ uint32 data3_value;
+} PMAPVTMONControl;
+
+typedef struct PMUBUSCfg {
+ uint32 window[8];
+ uint32 control;
+} PMUBUSCfg;
+
+typedef struct ProcessMonitorRegs {
+ uint32 MonitorCtrl; /* 0x00 */
+ uint32 unused0[7];
+ PMRingOscillatorControl ROSC; /* 0x20 */
+ uint32 unused1;
+ PMMiscControl Misc; /* 0x40 */
+ PMSSBMasterControl SSBMaster; /* 0x60 */
+ uint32 unused2[5];
+ PMEctrControl Ectr; /* 0x80 */
+ uint32 unused3[11];
+ PMBMaster PMBM[2]; /* 0xc0 */
+ PMAPVTMONControl APvtmonCtrl; /* 0x100 */
+ uint32 unused4[9];
+ PMUBUSCfg UBUSCfg; /* 0x160 */
+} ProcessMonitorRegs;
+
+#define PROCMON ((volatile ProcessMonitorRegs * const) PROC_MON_BASE)
+
+
+/*
+ * Timer
+ */
+typedef struct Timer {
+ uint32 TimerCtl0; /* 0x00 */
+ uint32 TimerCtl1; /* 0x04 */
+ uint32 TimerCtl2; /* 0x08 */
+ uint32 TimerCtl3; /* 0x0c */
+#define TIMERENABLE (1 << 31)
+#define RSTCNTCLR (1 << 30)
+
+ uint32 TimerCnt0; /* 0x10 */
+ uint32 TimerCnt1; /* 0x14 */
+ uint32 TimerCnt2; /* 0x18 */
+ uint32 TimerCnt3; /* 0x1c */
+#define TIMER_COUNT_MASK 0x3FFFFFFF
+
+ uint32 TimerMask; /* 0x20 */
+#define TIMER0EN (1 << 0)
+#define TIMER1EN (1 << 1)
+#define TIMER2EN (1 << 2)
+#define TIMER3EN (1 << 3)
+
+ uint32 TimerInts; /* 0x24 */
+#define TIMER0 (1 << 0)
+#define TIMER1 (1 << 1)
+#define TIMER2 (1 << 2)
+#define TIMER3 (1 << 3)
+#define WATCHDOG (1 << 4)
+
+ uint32 WatchDogDefCount; /* 0x28 */
+
+ /* Write 0xff00 0x00ff to Start timer
+ * Write 0xee00 0x00ee to Stop and re-load default count
+ * Read from this register returns current watch dog count
+ */
+ uint32 WatchDogCtl; /* 0x2c */
+
+ /* Number of 50-MHz ticks for WD Reset pulse to last */
+ uint32 WDResetCount; /* 0x30 */
+ uint32 SoftRst; /* 0x34 */
+#define SOFT_RESET (1 << 0)
+ uint32 ResetStatus; /* 0x38 */
+#define PCIE_RESET_STATUS 0x10000000
+#define SW_RESET_STATUS 0x20000000
+#define HW_RESET_STATUS 0x40000000
+#define POR_RESET_STATUS 0x80000000
+#define RESET_STATUS_MASK 0xF0000000
+} Timer;
+
+#define TIMER ((volatile Timer * const) TIMR_BASE)
+
+#endif /* __ASSEMBLER__ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/63146_map_part.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/63146_map_part.h
new file mode 100755
index 0000000000..a7e52c43d1
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/63146_map_part.h
@@ -0,0 +1,530 @@
+/*
+<:copyright-BRCM:2019:DUAL/GPL:standard
+
+ Copyright (c) 2019 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+*/
+
+#ifndef __BCM63146_MAP_PART_H
+#define __BCM63146_MAP_PART_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "bcmtypes.h"
+
+
+#define MEMC_PHYS_BASE 0x80040000 /* MC2 TOP */
+#define MEMC_SIZE 0x00040000
+
+#define PMC_PHYS_BASE 0xffa00000
+#define PMC_SIZE 0x00200000
+#define PMC_OFFSET 0x00100000
+#define PROC_MON_OFFSET 0x00100000
+#define PMB_OFFSET 0x00120100
+
+#define PERF_PHYS_BASE 0xff800000
+#define PERF_SIZE 0x3000
+#define TIMR_OFFSET 0x0400 /* 64 bit timer registers */
+#define WDTIMR0_OFFSET 0x0480
+#define WDTIMR1_OFFSET 0x04c0
+
+#define BIUCFG_PHYS_BASE 0x81060000
+#define BIUCFG_SIZE 0x3000
+#define BIUCFG_OFFSET 0x0000
+
+#define GIC_PHYS_BASE 0x81000000
+#define GIC_SIZE 0x10000
+#define GIC_OFFSET 0x0000
+#define GICD_OFFSET 0x1000
+#define GICC_OFFSET 0x2000
+
+#define PMC_BASE (PMC_PHYS_BASE + PMC_OFFSET)
+#define PROC_MON_BASE (PMC_PHYS_BASE + PROC_MON_OFFSET)
+#define PMB_BASE (PMC_PHYS_BASE + PMB_OFFSET)
+#define TIMR_BASE (PERF_PHYS_BASE + TIMR_OFFSET
+#define WDTIMR0_BASE (PERF_PHYS_BASE + WDTIMR0_OFFSET)
+#define BIUCFG_BASE (BIUCFG_PHYS_BASE + BIUCFG_OFFSET)
+
+#ifndef __ASSEMBLER__
+
+/*
+ * Power Management Control
+ */
+typedef struct PmcCtrlReg {
+ uint32 gpTmr0Ctl; /* 0x018 */
+ uint32 gpTmr0Cnt; /* 0x01c */
+ uint32 gpTmr1Ctl; /* 0x020 */
+ uint32 gpTmr1Cnt; /* 0x024 */
+ uint32 hostMboxIn; /* 0x028 */
+ uint32 hostMboxOut; /* 0x02c */
+ uint32 reserved[4]; /* 0x030 */
+ uint32 dmaCtrl; /* 0x040 */
+ uint32 dmaStatus; /* 0x044 */
+ uint32 dma0_3FifoStatus; /* 0x048 */
+ uint32 reserved1[4]; /* 0x04c */
+ uint32 diagControl; /* 0x05c */
+ uint32 diagHigh; /* 0x060 */
+ uint32 diagLow; /* 0x064 */
+ uint32 reserved8; /* 0x068 */
+ uint32 addr1WndwMask; /* 0x06c */
+ uint32 addr1WndwBaseIn; /* 0x070 */
+ uint32 addr1WndwBaseOut; /* 0x074 */
+ uint32 addr2WndwMask; /* 0x078 */
+ uint32 addr2WndwBaseIn; /* 0x07c */
+ uint32 addr2WndwBaseOut; /* 0x080 */
+ uint32 scratch; /* 0x084 */
+ uint32 reserved9; /* 0x088 */
+ uint32 softResets; /* 0x08c */
+ uint32 reserved2; /* 0x090 */
+ uint32 m4keCoreStatus; /* 0x094 */
+ uint32 reserved3; /* 0x098 */
+ uint32 ubSlaveTimeout; /* 0x09c */
+ uint32 diagEn; /* 0x0a0 */
+ uint32 devTimeout; /* 0x0a4 */
+ uint32 ubusErrorOutMask; /* 0x0a8 */
+ uint32 diagCaptStopMask; /* 0x0ac */
+ uint32 revId; /* 0x0b0 */
+ uint32 reserved4[4]; /* 0x0b4 */
+ uint32 diagCtrl; /* 0x0c4 */
+ uint32 diagStat; /* 0x0c8 */
+ uint32 diagMask; /* 0x0cc */
+ uint32 diagRslt; /* 0x0d0 */
+ uint32 diagCmp; /* 0x0d4 */
+ uint32 diagCapt; /* 0x0d8 */
+ uint32 diagCnt; /* 0x0dc */
+ uint32 diagEdgeCnt; /* 0x0e0 */
+ uint32 reserved5[4]; /* 0x0e4 */
+ uint32 smisc_bus_config; /* 0x0f4 */
+ uint32 lfsr; /* 0x0f8 */
+ uint32 dqm_pac_lock; /* 0x0fc */
+ uint32 l1_irq_4ke_mask; /* 0x100 */
+ uint32 l1_irq_4ke_status; /* 0x104 */
+ uint32 l1_irq_mips_mask; /* 0x108 */
+ uint32 l1_irq_mips_status; /* 0x10c */
+ uint32 l1_irq_mips1_mask; /* 0x110 */
+ uint32 reserved6[3]; /* 0x114 */
+ uint32 l2_irq_gp_mask; /* 0x120 */
+ uint32 l2_irq_gp_status; /* 0x124 */
+ uint32 l2_irq_gp_set; /* 0x128 */
+ uint32 reserved7; /* 0x12c */
+ uint32 gp_in_irq_mask; /* 0x130 */
+ uint32 gp_in_irq_status; /* 0x134 */
+ uint32 gp_in_irq_set; /* 0x138 */
+ uint32 gp_in_irq_sense; /* 0x13c */
+ uint32 gp_in; /* 0x140 */
+ uint32 gp_out; /* 0x144 */
+} PmcCtrlReg;
+
+typedef struct PmcDmaReg {
+ /* 0x00 */
+ uint32 src;
+ uint32 dest;
+ uint32 cmdList;
+ uint32 lenCtl;
+ /* 0x10 */
+ uint32 rsltSrc;
+ uint32 rsltDest;
+ uint32 rsltHcs;
+ uint32 rsltLenStat;
+} PmcDmaReg;
+
+typedef struct PmcTokenReg {
+ /* 0x00 */
+ uint32 bufSize;
+ uint32 bufBase;
+ uint32 idx2ptrIdx;
+ uint32 idx2ptrPtr;
+ /* 0x10 */
+ uint32 unused[2];
+ uint32 bufSize2;
+} PmcTokenReg;
+
+typedef struct PmcPerfPowReg {
+ uint32 freqScalarCtrl; /* 0x3c */
+ uint32 freqScalarMask; /* 0x40 */
+} PmcPerfPowReg;
+
+typedef struct PmcDQMPac {
+ uint32 dqmPac[32];
+} PmcDQMPac;
+
+typedef struct PmcDQMReg {
+ uint32 cfg; /* 0x1c00 */
+ uint32 _4keLowWtmkIrqMask; /* 0x1c04 */
+ uint32 mipsLowWtmkIrqMask; /* 0x1c08 */
+ uint32 lowWtmkIrqMask; /* 0x1c0c */
+ uint32 _4keNotEmptyIrqMask; /* 0x1c10 */
+ uint32 mipsNotEmptyIrqMask; /* 0x1c14 */
+ uint32 notEmptyIrqSts; /* 0x1c18 */
+ uint32 queueRst; /* 0x1c1c */
+ uint32 notEmptySts; /* 0x1c20 */
+ uint32 nextAvailMask; /* 0x1c24 */
+ uint32 nextAvailQueue; /* 0x1c28 */
+ uint32 mips1LowWtmkIrqMask; /* 0x1c2c */
+ uint32 mips1NotEmptyIrqMask; /* 0x1c30 */
+ uint32 autoSrcPidInsert; /* 0x1c34 */
+ uint32 timerIrqStatus; /* 0x1c38 */
+ uint32 timerStatus; /* 0x1c3c */
+ uint32 _4keTimerIrqMask; /* 0x1c40 */
+ uint32 mipsTimerIrqMask; /* 0x1c44 */
+ uint32 mips1TimerIrqMask; /* 0x1c48 */
+} PmcDQMReg;
+
+typedef struct PmcCntReg {
+ uint32 cntr[10];
+ uint32 unused[6]; /* 0x28-0x3f */
+ uint32 cntrIrqMask;
+ uint32 cntrIrqSts;
+} PmcCntReg;
+
+typedef struct PmcDqmQCtrlReg {
+ uint32 size;
+ uint32 cfga;
+ uint32 cfgb;
+ uint32 cfgc;
+} PmcDqmQCtrlReg;
+
+typedef struct PmcDqmQDataReg {
+ uint32 word[4];
+} PmcDqmQDataReg;
+
+typedef struct PmcDqmQMibReg {
+ uint32 qNumFull[32];
+ uint32 qNumEmpty[32];
+ uint32 qNumPushed[32];
+} PmcDqmQMibReg;
+
+typedef struct SSBMaster {
+ uint32 ssbmControl; /* 0x0060 */
+ uint32 ssbmWrData; /* 0x0064 */
+ uint32 ssbmRdData; /* 0x0068 */
+ uint32 ssbmStatus; /* 0x006c */
+} SSBMaster;
+
+typedef struct PmmReg {
+ uint32 memPowerCtrl; /* 0x0000 */
+ uint32 regSecurityConfig; /* 0x0004 */
+} PmmReg;
+
+typedef struct keyholeReg {
+ uint32 ctrlSts;
+ uint32 wrData;
+ uint32 mutex;
+ uint32 rdData;
+} keyholeReg;
+
+typedef struct PmbBus {
+ uint32 config; /* 0x0100 */
+ uint32 arbiter; /* 0x0104 */
+ uint32 timeout; /* 0x0108 */
+ uint32 unused1; /* 0x010c */
+ keyholeReg keyhole[4]; /* 0x0110-0x014f */
+ uint32 unused2[44]; /* 0x0150-0x01ff */
+ uint32 map[64]; /* 0x0200-0x02ff */
+}PmbBus;
+
+typedef struct CoreCtrl {
+ uint32 coreEnable; /* 0x0400 */
+ uint32 autoresetControl; /* 0x0404 */
+ uint32 coreIdle; /* 0x0408 */
+ uint32 coreResetCause; /* 0x040c */
+ uint32 memPwrDownCtrl0; /* 0x0410 */
+ uint32 memPwrDownSts0; /* 0x0414 */
+ uint32 memPwrDownCtrl1; /* 0x0418 */
+ uint32 memPwrDownSts1; /* 0x041c */
+ uint32 sysFlg0Status; /* 0x0420 */
+ uint32 sysFlg0Set; /* 0x0424 */
+ uint32 sysFlg0Clear; /* 0x0428 */
+ uint32 unused1; /* 0x042c */
+ uint32 usrFlg0Status; /* 0x0430 */
+ uint32 usrFlg0Set; /* 0x0434 */
+ uint32 usrFlg0Clear; /* 0x0438 */
+ uint32 unused2; /* 0x043c */
+ uint32 subsystemRev; /* 0x0440 */
+ uint32 resetVector; /* 0x0444 */
+} CoreCtrl;
+
+typedef struct CoreState {
+ uint32 sysMbx[8]; /* 0x0480 */
+ uint32 usrMbx[8]; /* 0x04a0 */
+ uint32 sysMtx[4]; /* 0x04c0 */
+ uint32 usrMtx[8]; /* 0x04d0 */
+} CoreState;
+
+typedef struct CoreIntr {
+ uint32 irqStatus; /* 0x0500 */
+ uint32 irqSet; /* 0x0504 */
+ uint32 irqClear; /* 0x0508 */
+ uint32 unused1; /* 0x050c */
+ uint32 srqStatus; /* 0x0510 */
+ uint32 srqSet; /* 0x0514 */
+ uint32 srqClear; /* 0x0518 */
+ uint32 unused2; /* 0x051c */
+ uint32 drqStatus; /* 0x0520 */
+ uint32 drqSet; /* 0x0524 */
+ uint32 drqClear; /* 0x0528 */
+ uint32 unused3; /* 0x052c */
+ uint32 frqStatus; /* 0x0530 */
+ uint32 frqSet; /* 0x0534 */
+ uint32 frqClear; /* 0x0538 */
+ uint32 unused4; /* 0x053c */
+ uint32 hostIrqLatched; /* 0x0540 */
+ uint32 hostIrqSet; /* 0x0544 */
+ uint32 hostIrqClear; /* 0x0548 */
+ uint32 hostIrqEnable; /* 0x054c */
+ uint32 obusFaultStatus; /* 0x0550 */
+ uint32 obusFaultClear; /* 0x0554 */
+ uint32 obusFaultAddr; /* 0x0558 */
+} CoreIntr;
+
+typedef struct CoreProfile {
+ uint32 mutex; /* 0x0580 */
+ uint32 lastConfPcLo; /* 0x0584 */
+ uint32 lastConfPcHi; /* 0x0588 */
+ uint32 lastPcLo; /* 0x058c */
+ uint32 lastPcHi; /* 0x0590 */
+ uint32 braTargetPc0Lo; /* 0x0594 */
+ uint32 braTargetPc0Hi; /* 0x0598 */
+ uint32 braTargetPc1Lo; /* 0x059c */
+ uint32 braTargetPc1Hi; /* 0x05a0 */
+ uint32 braTargetPc2Lo; /* 0x05a4 */
+ uint32 braTargetPc2Hi; /* 0x05a8 */
+ uint32 braTargetPc3Lo; /* 0x05ac */
+ uint32 braTargetPc3Hi; /* 0x05b0 */
+ uint32 unused[3]; /* 0x05b4-0x05bf */
+ uint32 profSampleW[4]; /* 0x05c0 */
+} CoreProfile;
+
+typedef struct MaestroMisc {
+ CoreCtrl coreCtrl; /* 0x0400 */
+ uint32 unused1[14]; /* 0x0448-0x047f */
+ CoreState coreState; /* 0x0480 */
+ uint32 unused2[4]; /* 0x04f0-0x04ff */
+ CoreIntr interrupt; /* 0x0500 */
+ uint32 unused3[9]; /* 0x055c-0x057f */
+ CoreProfile profile; /* 0x0580 */
+} MaestroMisc;
+
+typedef struct Pmc {
+ uint32 unused0[1030];
+ PmcCtrlReg ctrl; /* 0x1018 */
+ uint32 unused1[622]; /* 0x1148-0x1cff */
+ PmcDQMPac dqmPac; /* 0x1b00 */
+ uint32 unused5[32]; /* 0x1b80-0x1bff */
+ PmcDQMReg dqm; /* 0x1c00 */
+ uint32 unused6[749]; /* 0x1c4c-0x27ff */
+ uint32 qStatus[32]; /* 0x2800 */
+ uint32 unused7[480]; /* 0x2880-0x2fff */
+ PmcDqmQMibReg qMib; /* 0x3000 */
+ uint32 unused8[928]; /* 0x3180-0x3fff */
+ PmcDqmQCtrlReg dqmQCtrl[8]; /* 0x4000 */
+ uint32 unused9[992]; /* 0x4080-0x4fff */
+ PmcDqmQDataReg dqmQData[8]; /* 0x5000 */
+} Pmc;
+#define PMC ((volatile Pmc * const) PMC_BASE)
+
+typedef struct Procmon {
+ uint32 unused00[256];
+ MaestroMisc maestroReg; /* 0x00400 */
+ uint32 unused10[32396]; /* 0x005d0-0x1ffff */
+ PmmReg pmm; /* 0x20000 */
+ uint32 unused11[22]; /* 0x20008-0x2005f */
+ SSBMaster ssbMasterCtrl; /* 0x20060 */
+ uint32 unused12[36]; /* 0x20070-0x200ff */
+ PmbBus pmb; /* 0x20100 */
+ uint32 unused13[32576]; /* 0x20300-0x3ffff */
+ uint32 qsm[128]; /* 0x40000-0x401ff */
+ uint32 unused14[65408]; /* 0x40200-0x7ffff */
+ uint32 dtcm[1024]; /* 0x80000-0x80fff */
+ uint32 unused15[64512]; /* 0x81000-0xbffff */
+ uint32 itcm[4096]; /* 0xc0000-0xc3fff */
+} Procmon;
+#define PROCMON ((volatile Procmon * const) PROC_MON_BASE)
+
+typedef struct PMSSBMasterControl {
+ uint32 control;
+ uint32 wr_data;
+ uint32 rd_data;
+} PMSSBMasterControl;
+
+typedef struct
+{
+ uint32 control;
+#define PMC_PMBM_START (1 << 31)
+#define PMC_PMBM_TIMEOUT (1 << 30)
+#define PMC_PMBM_SLAVE_ERR (1 << 29)
+#define PMC_PMBM_BUSY (1 << 28)
+#define PMC_PMBM_BUS_SHIFT (20)
+#define PMC_PMBM_Read (0 << 24)
+#define PMC_PMBM_Write (1 << 24)
+ uint32 wr_data;
+ uint32 mutex;
+ uint32 rd_data;
+} PMB_keyhole_reg;
+
+typedef struct PMBMaster {
+ uint32 config;
+#define PMB_NUM_REGS_SHIFT (20)
+#define PMB_NUM_REGS_MASK (0x3ff)
+ uint32 arbitger;
+ uint32 timeout;
+ uint32 reserved;
+ PMB_keyhole_reg keyhole[4];
+ uint32 reserved1[44];
+ uint32 map[64];
+} PMBMaster;
+#define PMB ((volatile PMBMaster * const) PMB_BASE)
+
+
+/*
+ * Timer
+ */
+#define TIMER_64BIT
+typedef struct Timer {
+ uint64 TimerCtl0; /* 0x00 */
+ uint64 TimerCtl1; /* 0x08 */
+ uint64 TimerCtl2; /* 0x10 */
+ uint64 TimerCtl3; /* 0x18 */
+#define TIMERENABLE (1ULL << 63)
+#define RSTCNTCLR (1ULL << 62)
+ uint64 TimerCnt0; /* 0x20 */
+ uint64 TimerCnt1; /* 0x28 */
+ uint64 TimerCnt2; /* 0x30 */
+ uint64 TimerCnt3; /* 0x38 */
+#define TIMER_COUNT_MASK 0x3FFFFFFFFFFFFFFFULL
+ uint32 TimerMask; /* 0x40 */
+#define TIMER0EN 0x01
+#define TIMER1EN 0x02
+#define TIMER2EN 0x04
+#define TIMER3EN 0x08
+ uint32 TimerInts; /* 0x44 */
+#define TIMER0 0x01
+#define TIMER1 0x02
+#define TIMER2 0x04
+#define TIMER3 0x08
+ uint32 ResetReason;/* 0x4c */
+ uint32 spare[3]; /* 0x50 - 0x5b */
+ uint32 reserved1[9]; /* 0x5c - 0x7f */
+} Timer;
+
+#define TIMER ((volatile Timer * const) TIMR_BASE)
+
+
+typedef struct WDTimer {
+ uint32 WatchDogDefCount;
+ /* Write 0xff00 0x00ff to Start timer
+ * Write 0xee00 0x00ee to Stop and re-load default count
+ * Read from this register returns current watch dog count
+ */
+ uint32 WatchDogCtl;
+
+ /* Number of 50-MHz ticks for WD Reset pulse to last */
+ uint32 WDResetCount;
+
+ uint32 SoftRst;
+#define SOFT_RESET 0x00000001
+ uint32 WDAccessCtl;
+} WDTimer;
+
+#define WDTIMER0 ((volatile WDTimer * const) WDTIMR0_BASE)
+
+typedef struct BIUCFG_Access {
+ uint32 permission; /* 0x0 */
+ uint32 sbox; /* 0x4 */
+ uint32 cpu_defeature; /* 0x8 */
+ uint32 dbg_security; /* 0xc */
+ uint32 rsvd1[32]; /* 0x10 - 0x8f */
+ uint64 violation[2]; /* 0x90 - 0x9f */
+ uint32 ts_access[2]; /* 0xa0 - 0xa7 */
+ uint32 rsvd2[22]; /* 0xa8 - 0xff */
+}BIUCFG_Access;
+
+typedef struct BIUCFG_Cluster {
+ uint32 permission; /* 0x0 */
+ uint32 config; /* 0x4 */
+ uint32 status; /* 0x8 */
+ uint32 control; /* 0xc */
+ uint32 cpucfg; /* 0x10 */
+ uint32 dbgrom; /* 0x14 */
+ uint32 rsvd1[2]; /* 0x18 - 0x1f */
+ uint64 rvbar_addr[4]; /* 0x20 - 0x3f */
+ uint32 rsvd2[48]; /* 0x40 - 0xff */
+}BIUCFG_Cluster;
+
+typedef struct BIUCFG_Bac {
+ uint32 bac_permission; /* 0x00 */
+ uint32 bac_periphbase; /* 0x04 */
+ uint32 rsvd[2]; /* 0x08 - 0x0f */
+ uint32 bac_event; /* 0x10 */
+ uint32 rsvd_1[3]; /* 0x14 - 0x1f */
+ uint32 bac_ccicfg; /* 0x20 */
+ uint32 bac_cciaddr; /* 0x24 */
+ uint32 rsvd_2[4]; /* 0x28 - 0x37 */
+ uint32 bac_ccievs2; /* 0x38 */
+ uint32 bac_ccievs3; /* 0x3c */
+ uint32 bac_ccievs4; /* 0x40 */
+ uint32 rsvd_3[3]; /* 0x44 - 0x4f */
+ uint32 bac_ccievm0; /* 0x50 */
+ uint32 bac_ccievm1; /* 0x54 */
+ uint32 rsvd_4[2]; /* 0x58 - 0x5f */
+ uint32 bac_dapapbcfg; /* 0x60 */
+ uint32 bac_status; /* 0x64 */
+ uint32 rsvd_5[2]; /* 0x68 - 0x6f */
+ uint32 cpu_therm_irq_cfg; /* 0x70 */
+ uint32 cpu_therm_threshold_cfg; /* 0x74 */
+ uint32 rsvd_6; /* 0x78 */
+ uint32 cpu_therm_temp; /* 0x7c */
+ uint32 rsvd_7[32]; /* 0x80 - 0xff */
+} BIUCFG_Bac;
+
+typedef struct BIUCFG_Aux {
+ uint32 aux_permission; /* 0x00 */
+ uint32 rsvd[3]; /* 0x04 - 0x0f */
+ uint32 c0_clk_control; /* 0x10 */
+ uint32 c0_clk_ramp; /* 0x14 */
+ uint32 c0_clk_pattern; /* 0x18 */
+ uint32 rsvd_1; /* 0x1c */
+ uint32 c1_clk_control; /* 0x20 */
+ uint32 c1_clk_ramp; /* 0x24 */
+ uint32 c1_clk_pattern; /* 0x28 */
+ uint32 rsvd_2[53]; /* 0x2c - 0xff */
+} BIUCFG_Aux;
+
+typedef struct BIUCFG {
+ BIUCFG_Access access; /* 0x0 - 0xff*/
+ BIUCFG_Cluster cluster[2]; /* 0x100 - 0x2ff*/
+ BIUCFG_Bac bac; /* 0x300 - 0x3ff */
+ uint32 anonymous[192]; /* 0x400 - 0x6ff */
+ BIUCFG_Aux aux; /* 0x700 - 0x7ff */
+ uint32 anonymous_1[2560]; /* 0x800 - 0x2fff */
+}BIUCFG;
+
+#define BIUCFG ((volatile BIUCFG * const) BIUCFG_BASE)
+
+
+#endif /* __ASSEMBLER__ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/63148_map_part.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/63148_map_part.h
new file mode 100644
index 0000000000..6f23e24cfc
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/63148_map_part.h
@@ -0,0 +1,571 @@
+/*
+<:copyright-BRCM:2013:DUAL/GPL:standard
+
+ Copyright (c) 2013 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+*/
+
+#ifndef __BCM63148_MAP_PART_H
+#define __BCM63148_MAP_PART_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "bcmtypes.h"
+
+#define PER_BASE 0xfffe0000
+#define REG_BASE 0x80000000
+
+#define MEMC_PHYS_BASE (REG_BASE + 0x00002000) /* DDR IO Buf Control */
+#define MEMC_SIZE 0x20000
+
+#define PMC_PHYS_BASE (REG_BASE + 0x00400000)
+#define PROC_MON_PHYS_BASE (REG_BASE + 0x00480000)
+#define GICD_PHYS_BASE (REG_BASE + 0x00031000)
+#define GICC_PHYS_BASE (REG_BASE + 0x00032000)
+
+#define B15_CTRL_PHYS_BASE (REG_BASE + 0x00020000)
+#define B15_PHYS_BASE (REG_BASE + 0x00030000)
+
+
+#define PERF_PHYS_BASE (PER_BASE + 0x00008000) /* chip control */
+#define TIMR_PHYS_BASE (PER_BASE + 0x00008080) /* timer registers */
+#define BOOTLUT_PHYS_BASE (PER_BASE + 0x00010000)
+
+#define PMC_BASE PMC_PHYS_BASE
+#define PROC_MON_BASE PROC_MON_PHYS_BASE
+#define TIMR_BASE TIMR_PHYS_BASE
+#define BOOTLUT_BASE BOOTLUT_PHYS_BASE
+#define B15_CTRL_BASE B15_CTRL_PHYS_BASE
+#define B15_BASE B15_PHYS_BASE
+#define GICC_BASE GICC_PHYS_BASE
+#define GICD_BASE GICD_PHYS_BASE
+
+#ifndef __ASSEMBLER__
+/*
+ * Power Management Control
+ */
+typedef struct PmcCtrlReg {
+ /* 0x00 */
+ uint32 l1Irq4keMask;
+ uint32 l1Irq4keStatus;
+ uint32 l1IrqMipsMask;
+ uint32 l1IrqMipsStatus;
+ /* 0x10 */
+ uint32 l2IrqGpMask;
+ uint32 l2IrqGpStatus;
+ uint32 gpTmr0Ctl;
+ uint32 gpTmr0Cnt;
+ /* 0x20 */
+ uint32 gpTmr1Ctl;
+ uint32 gpTmr1Cnt;
+ uint32 hostMboxIn;
+ uint32 hostMboxOut;
+ /* 0x30 */
+#define PMC_CTRL_GP_FLASH_BOOT_STALL 0x00000080
+ uint32 gpOut;
+ uint32 gpIn;
+ uint32 gpInIrqMask;
+ uint32 gpInIrqStatus;
+ /* 0x40 */
+ uint32 dmaCtrl;
+ uint32 dmaStatus;
+ uint32 dma0_3FifoStatus;
+ uint32 unused0[3]; /* 0x4c-0x57 */
+ /* 0x58 */
+ uint32 l1IrqMips1Mask;
+ uint32 diagControl;
+ /* 0x60 */
+ uint32 diagHigh;
+ uint32 diagLow;
+ uint32 badAddr;
+ uint32 addr1WndwMask;
+ /* 0x70 */
+ uint32 addr1WndwBaseIn;
+ uint32 addr1WndwBaseOut;
+ uint32 addr2WndwMask;
+ uint32 addr2WndwBaseIn;
+ /* 0x80 */
+ uint32 addr2WndwBaseOut;
+ uint32 scratch;
+ uint32 tm;
+ uint32 softResets;
+ /* 0x90 */
+ uint32 eb2ubusTimeout;
+ uint32 m4keCoreStatus;
+ uint32 gpInIrqSense;
+ uint32 ubSlaveTimeout;
+ /* 0xa0 */
+ uint32 diagEn;
+ uint32 devTimeout;
+ uint32 ubusErrorOutMask;
+ uint32 diagCaptStopMask;
+ /* 0xb0 */
+ uint32 revId;
+ uint32 gpTmr2Ctl;
+ uint32 gpTmr2Cnt;
+ uint32 legacyMode;
+ /* 0xc0 */
+ uint32 smisbMonitor;
+ uint32 diagCtrl;
+ uint32 diagStat;
+ uint32 diagMask;
+ /* 0xd0 */
+ uint32 diagRslt;
+ uint32 diagCmp;
+ uint32 diagCapt;
+ uint32 diagCnt;
+ /* 0xe0 */
+ uint32 diagEdgeCnt;
+ uint32 unused1[4]; /* 0xe4-0xf3 */
+ /* 0xf4 */
+ uint32 iopPeriphBaseAddr;
+ uint32 lfsr;
+ uint32 unused2; /* 0xfc-0xff */
+} PmcCtrlReg;
+
+typedef struct PmcOutFifoReg {
+ uint32 msgCtrl; /* 0x00 */
+ uint32 msgSts; /* 0x04 */
+ uint32 unused[14]; /* 0x08-0x3f */
+ uint32 msgData[16]; /* 0x40-0x7c */
+} PmcOutFifoReg;
+
+typedef struct PmcInFifoReg {
+ uint32 msgCtrl; /* 0x00 */
+ uint32 msgSts; /* 0x04 */
+ uint32 unused[13]; /* 0x08-0x3b */
+ uint32 msgLast; /* 0x3c */
+ uint32 msgData[16]; /* 0x40-0x7c */
+} PmcInFifoReg;
+
+typedef struct PmcDmaReg {
+ /* 0x00 */
+ uint32 src;
+ uint32 dest;
+ uint32 cmdList;
+ uint32 lenCtl;
+ /* 0x10 */
+ uint32 rsltSrc;
+ uint32 rsltDest;
+ uint32 rsltHcs;
+ uint32 rsltLenStat;
+} PmcDmaReg;
+
+typedef struct PmcTokenReg {
+ /* 0x00 */
+ uint32 bufSize;
+ uint32 bufBase;
+ uint32 idx2ptrIdx;
+ uint32 idx2ptrPtr;
+ /* 0x10 */
+ uint32 unused[2];
+ uint32 bufSize2;
+} PmcTokenReg;
+
+typedef struct PmcPerfPowReg {
+ /* 0x00 */
+ uint32 dcacheHit;
+ uint32 dcacheMiss;
+ uint32 icacheHit;
+ uint32 icacheMiss;
+ /* 0x10 */
+ uint32 instnComplete;
+ uint32 wtbMerge;
+ uint32 wtbNoMerge;
+ uint32 itlbHit;
+ /* 0x20 */
+ uint32 itlbMiss;
+ uint32 dtlbHit;
+ uint32 dtlbMiss;
+ uint32 jtlbHit;
+ /* 0x30 */
+ uint32 jtlbMiss;
+ uint32 powerSubZone;
+ uint32 powerMemPda;
+ uint32 freqScalarCtrl;
+ /* 0x40 */
+ uint32 freqScalarMask;
+} PmcPerfPowReg;
+
+typedef struct PmcDQMReg {
+ /* 0x00 */
+ uint32 cfg;
+ uint32 _4keLowWtmkIrqMask;
+ uint32 mipsLowWtmkIrqMask;
+ uint32 lowWtmkIrqMask;
+ /* 0x10 */
+ uint32 _4keNotEmptyIrqMask;
+ uint32 mipsNotEmptyIrqMask;
+ uint32 notEmptyIrqSts;
+ uint32 queueRst;
+ /* 0x20 */
+ uint32 notEmptySts;
+ uint32 nextAvailMask;
+ uint32 nextAvailQueue;
+ uint32 mips1LowWtmkIrqMask;
+ /* 0x30 */
+ uint32 mips1NotEmptyIrqMask;
+ uint32 autoSrcPidInsert;
+} PmcDQMReg;
+
+typedef struct PmcCntReg {
+ uint32 cntr[10];
+ uint32 unused[6]; /* 0x28-0x3f */
+ uint32 cntrIrqMask;
+ uint32 cntrIrqSts;
+} PmcCntReg;
+
+typedef struct PmcDqmQCtrlReg {
+ uint32 size;
+ uint32 cfga;
+ uint32 cfgb;
+ uint32 cfgc;
+} PmcDqmQCtrlReg;
+
+typedef struct PmcDqmQDataReg {
+ uint32 word[4];
+} PmcDqmQDataReg;
+
+typedef struct PmcDqmQMibReg {
+ uint32 qNumFull[32];
+ uint32 qNumEmpty[32];
+ uint32 qNumPushed[32];
+} PmcDqmQMibReg;
+
+typedef struct Pmc {
+ uint32 baseReserved; /* 0x0000 */
+ uint32 unused0[1023];
+ PmcCtrlReg ctrl; /* 0x1000 */
+
+ PmcOutFifoReg outFifo; /* 0x1100 */
+ uint32 unused1[32]; /* 0x1180-0x11ff */
+ PmcInFifoReg inFifo; /* 0x1200 */
+ uint32 unused2[32]; /* 0x1280-0x12ff */
+
+ PmcDmaReg dma[2]; /* 0x1300 */
+ uint32 unused3[48]; /* 0x1340-0x13ff */
+
+ PmcTokenReg token; /* 0x1400 */
+ uint32 unused4[121]; /* 0x141c-0x15ff */
+
+ PmcPerfPowReg perfPower; /* 0x1600 */
+ uint32 unused5[47]; /* 0x1644-0x16ff */
+
+ uint32 msgId[32]; /* 0x1700 */
+ uint32 unused6[32]; /* 0x1780-0x17ff */
+
+ PmcDQMReg dqm; /* 0x1800 */
+ uint32 unused7[50]; /* 0x1838-0x18ff */
+
+ PmcCntReg hwCounter; /* 0x1900 */
+ uint32 unused8[46]; /* 0x1948-0x19ff */
+
+ PmcDqmQCtrlReg dqmQCtrl[32]; /* 0x1a00 */
+ PmcDqmQDataReg dqmQData[32]; /* 0x1c00 */
+ uint32 unused9[64]; /* 0x1e00-0x1eff */
+
+ uint32 qStatus[32]; /* 0x1f00 */
+ uint32 unused10[32]; /* 0x1f80-0x1fff */
+
+ PmcDqmQMibReg qMib; /* 0x2000 */
+ uint32 unused11[1952]; /* 0x2180-0x3ffff */
+
+ uint32 sharedMem[8192]; /* 0x4000-0xbffc */
+} Pmc;
+
+#define PMC ((volatile Pmc * const) PMC_BASE)
+
+/*
+ * Process Monitor Module
+ */
+typedef struct PMRingOscillatorControl {
+ uint32 control;
+ uint32 en_lo;
+ uint32 en_mid;
+ uint32 en_hi;
+ uint32 idle_lo;
+ uint32 idle_mid;
+ uint32 idle_hi;
+} PMRingOscillatorControl;
+
+#define RCAL_0P25UM_HORZ 0
+#define RCAL_0P25UM_VERT 1
+#define RCAL_0P5UM_HORZ 2
+#define RCAL_0P5UM_VERT 3
+#define RCAL_1UM_HORZ 4
+#define RCAL_1UM_VERT 5
+#define PMMISC_RMON_EXT_REG ((RCAL_1UM_VERT + 1)/2)
+#define PMMISC_RMON_VALID_MASK (0x1<<16)
+typedef struct PMMiscControl {
+ uint32 gp_out;
+ uint32 clock_select;
+ uint32 unused[2];
+ uint32 misc[4];
+} PMMiscControl;
+
+typedef struct PMSSBMasterControl {
+ uint32 control;
+#define PMC_SSBM_CONTROL_SSB_START (1<<15)
+#define PMC_SSBM_CONTROL_SSB_ADPRE (1<<13)
+#define PMC_SSBM_CONTROL_SSB_EN (1<<12)
+#define PMC_SSBM_CONTROL_SSB_CMD_SHIFT (10)
+#define PMC_SSBM_CONTROL_SSB_CMD_MASK (0x3 << PMC_SSBM_CONTROL_SSB_CMD_SHIFT)
+#define PMC_SSBM_CONTROL_SSB_CMD_READ (2)
+#define PMC_SSBM_CONTROL_SSB_CMD_WRITE (1)
+#define PMC_SSBM_CONTROL_SSB_ADDR_SHIFT (0)
+#define PMC_SSBM_CONTROL_SSB_ADDR_MASK (0x3ff << PMC_SSBM_CONTROL_SSB_ADDR_SHIFT)
+ uint32 wr_data;
+ uint32 rd_data;
+} PMSSBMasterControl;
+
+typedef struct PMEctrControl {
+ uint32 control;
+ uint32 interval;
+ uint32 thresh_lo;
+ uint32 thresh_hi;
+ uint32 count;
+} PMEctrControl;
+
+typedef struct PMBMaster {
+ uint32 ctrl;
+#define PMC_PMBM_START (1 << 31)
+#define PMC_PMBM_TIMEOUT (1 << 30)
+#define PMC_PMBM_SLAVE_ERR (1 << 29)
+#define PMC_PMBM_BUSY (1 << 28)
+#define PMC_PMBM_Read (0 << 20)
+#define PMC_PMBM_Write (1 << 20)
+ uint32 wr_data;
+ uint32 timeout;
+ uint32 rd_data;
+ uint32 unused[4];
+} PMBMaster;
+
+typedef struct PMAPVTMONControl {
+ uint32 control;
+ uint32 reserved;
+ uint32 cfg_lo;
+ uint32 cfg_hi;
+ uint32 data;
+ uint32 vref_data;
+ uint32 unused[2];
+ uint32 ascan_cfg;
+ uint32 warn_temp;
+ uint32 reset_temp;
+ uint32 temp_value;
+ uint32 data1_value;
+ uint32 data2_value;
+ uint32 data3_value;
+} PMAPVTMONControl;
+
+typedef struct PMUBUSCfg {
+ uint32 window[8];
+ uint32 control;
+} PMUBUSCfg;
+
+typedef struct ProcessMonitorRegs {
+ uint32 MonitorCtrl; /* 0x00 */
+ uint32 unused0[7];
+ PMRingOscillatorControl ROSC; /* 0x20 */
+ uint32 unused1;
+ PMMiscControl Misc; /* 0x40 */
+ PMSSBMasterControl SSBMaster; /* 0x60 */
+ uint32 unused2[5];
+ PMEctrControl Ectr; /* 0x80 */
+ uint32 unused3[11];
+ PMBMaster PMBM[2]; /* 0xc0 */
+ PMAPVTMONControl APvtmonCtrl; /* 0x100 */
+ uint32 unused4[9];
+ PMUBUSCfg UBUSCfg; /* 0x160 */
+} ProcessMonitorRegs;
+
+#define PROCMON ((volatile ProcessMonitorRegs * const) PROC_MON_BASE)
+
+
+/*
+ * Timer
+ */
+typedef struct Timer {
+ uint32 TimerCtl0; /* 0x00 */
+ uint32 TimerCtl1; /* 0x04 */
+ uint32 TimerCtl2; /* 0x08 */
+ uint32 TimerCtl3; /* 0x0c */
+#define TIMERENABLE (1 << 31)
+#define RSTCNTCLR (1 << 30)
+
+ uint32 TimerCnt0; /* 0x10 */
+ uint32 TimerCnt1; /* 0x14 */
+ uint32 TimerCnt2; /* 0x18 */
+ uint32 TimerCnt3; /* 0x1c */
+#define TIMER_COUNT_MASK 0x3FFFFFFF
+
+ uint32 TimerMask; /* 0x20 */
+#define TIMER0EN (1 << 0)
+#define TIMER1EN (1 << 1)
+#define TIMER2EN (1 << 2)
+#define TIMER3EN (1 << 3)
+
+ uint32 TimerInts; /* 0x24 */
+#define TIMER0 (1 << 0)
+#define TIMER1 (1 << 1)
+#define TIMER2 (1 << 2)
+#define TIMER3 (1 << 3)
+#define WATCHDOG (1 << 4)
+
+ uint32 WatchDogDefCount; /* 0x28 */
+
+ /* Write 0xff00 0x00ff to Start timer
+ * Write 0xee00 0x00ee to Stop and re-load default count
+ * Read from this register returns current watch dog count
+ */
+ uint32 WatchDogCtl; /* 0x2c */
+
+ /* Number of 50-MHz ticks for WD Reset pulse to last */
+ uint32 WDResetCount; /* 0x30 */
+ uint32 SoftRst; /* 0x34 */
+#define SOFT_RESET (1 << 0)
+ uint32 ResetStatus; /* 0x38 */
+#define PCIE_RESET_STATUS 0x10000000
+#define SW_RESET_STATUS 0x20000000
+#define HW_RESET_STATUS 0x40000000
+#define POR_RESET_STATUS 0x80000000
+#define RESET_STATUS_MASK 0xF0000000
+} Timer;
+
+#define TIMER ((volatile Timer * const) TIMR_BASE)
+
+/*
+ * B15 CFG
+ */
+typedef struct B15ArchRegion {
+ uint32 addr_ulimit;
+ uint32 addr_llimit;
+ uint32 permission;
+ uint32 access_right_ctrl;
+} B15ArchRegion;
+
+typedef struct B15Arch {
+ B15ArchRegion region[8];
+ uint32 unused[95];
+ uint32 scratch;
+} B15Arch;
+
+typedef struct B15CpuBusRange {
+#define ULIMIT_SHIFT 4
+#define BUSNUM_MASK 0x0000000FU
+
+#define BUSNUM_UBUS 1
+#define BUSNUM_RBUS 2
+#define BUSNUM_RSVD 3
+#define BUSNUM_MCP0 4
+#define BUSNUM_MCP1 5
+#define BUSNUM_MCP2 6
+
+ uint32 ulimit;
+ uint32 llimit;
+} B15CpuBusRange;
+
+typedef struct B15CpuAccessRightViol {
+ uint32 addr;
+ uint32 upper_addr;
+ uint32 detail_addr;
+} B15CpuAccessRightViol;
+
+typedef struct B15CpuBPCMAVS {
+ uint32 bpcm_id;
+ uint32 bpcm_capability;
+ uint32 bpcm_ctrl;
+ uint32 bpcm_status;
+ uint32 avs_rosc_ctrl;
+ uint32 avs_rosc_threshold;
+ uint32 avs_rosc_cnt;
+ uint32 avs_pwd_ctrl;
+} B15CpuBPCMAVS;
+
+typedef struct B15CpuCtrl {
+ B15CpuBusRange bus_range[11]; /* 0x0 */
+ uint32 secure_reset_hndshake;
+ uint32 secure_soft_reset;
+ B15CpuAccessRightViol access_right_viol[2]; /* 0x60 */
+ uint32 rac_cfg0;
+ uint32 rac_cfg1;
+ uint32 rac_flush; /* 0x80 */
+ uint32 cpu_power_cfg;
+ uint32 cpu0_pwr_zone_ctrl;
+ uint32 cpu1_pwr_zone_ctrl;
+ uint32 cpu2_pwr_zone_ctrl; /* 0x90 */
+ uint32 cpu3_pwr_zone_ctrl;
+ uint32 l2biu_pwr_zone_ctrl;
+ uint32 cpu0_pwr_zone_cfg1;
+ uint32 cpu0_pwr_zone_cfg2; /* 0xa0 */
+ uint32 cpu1_pwr_zone_cfg1;
+ uint32 cpu1_pwr_zone_cfg2;
+ uint32 cpu2_pwr_zone_cfg1;
+ uint32 cpu2_pwr_zone_cfg2; /* 0xb0 */
+ uint32 cpu3_pwr_zone_cfg1;
+ uint32 cpu3_pwr_zone_cfg2;
+ uint32 l2biu_pwr_zone_cfg1;
+ uint32 l2biu_pwr_zone_cfg2; /* 0xc0 */
+ uint32 cpu0_pwr_freq_scalar_ctrl;
+ uint32 cpu1_pwr_freq_scalar_ctrl;
+ uint32 cpu2_pwr_freq_scalar_ctrl;
+ uint32 cpu3_pwr_freq_scalar_ctrl; /* 0xd0 */
+ uint32 l2biu_pwr_freq_scalar_ctrl;
+ B15CpuBPCMAVS cpu_bpcm_avs[4]; /* 0xd8 */
+ B15CpuBPCMAVS l2biu_bpcm_avs; /* 0x158 */
+ uint32 reset_cfg; /* 0x178 */
+ uint32 clock_cfg;
+ uint32 misc_cfg; /* 0x180 */
+ uint32 credit;
+ uint32 therm_throttle_temp;
+ uint32 term_throttle_irq_cfg;
+ uint32 therm_irq_high; /* 0x190 */
+ uint32 therm_irq_low;
+ uint32 therm_misc_threshold;
+ uint32 therm_irq_misc;
+ uint32 defeature; /* 0x1a0 */
+ uint32 defeature_key;
+ uint32 debug_rom_addr;
+ uint32 debug_self_addr;
+ uint32 debug_tracectrl; /* 0x1b0 */
+ uint32 axi_cfg;
+ uint32 revision;
+ uint32 ubus_cfg_window[8]; /* 0x1bc */
+ uint32 ubus_cfg; /* 0x1dc */
+ uint32 unused[135];
+ uint32 scratch; /* 0x3fc */
+} B15CpuCtrl;
+
+typedef struct B15Ctrl {
+ uint32 unused0[1024];
+ B15Arch arch; /* 0x1000 */
+ uint32 unused1[896];
+ B15CpuCtrl cpu_ctrl; /* 0x2000 */
+} B15Ctrl;
+
+#define B15CTRL ((volatile B15Ctrl *const) B15_CTRL_BASE)
+
+#endif /* __ASSEMBLER__ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/63158_map_part.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/63158_map_part.h
new file mode 100644
index 0000000000..051021e08b
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/63158_map_part.h
@@ -0,0 +1,554 @@
+/*
+<:copyright-BRCM:2016:DUAL/GPL:standard
+
+ Copyright (c) 2016 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+*/
+
+#ifndef __BCM63158_MAP_PART_H
+#define __BCM63158_MAP_PART_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "bcmtypes.h"
+
+#define MEMC_PHYS_BASE 0x80180000 /* DDR IO Buf Control */
+#define MEMC_SIZE 0x40000
+
+#define PMC_PHYS_BASE 0x80200000
+#define PMC_SIZE 0x81000
+#define PMC_OFFSET 0x0000
+#define PROC_MON_PHYS_BASE 0x80280000
+#define PROC_MON_SIZE 0x1000
+#define PROC_MON_OFFSET 0x0000
+
+#define PERF_PHYS_BASE 0xff800000
+#define PERF_SIZE 0x3000
+#define TIMR_OFFSET 0x0400 /* 64 bit timer registers */
+#define WDTIMR0_OFFSET 0x0480
+#define WDTIMR1_OFFSET 0x04c0
+
+#define BIUCFG_PHYS_BASE 0x81060000
+#define BIUCFG_SIZE 0x3000
+#define BIUCFG_OFFSET 0x0000
+
+#define GIC_PHYS_BASE 0x81000000
+#define GIC_SIZE 0x10000
+#define GIC_OFFSET 0x0000
+#define GICD_OFFSET 0x1000
+#define GICC_OFFSET 0x2000
+
+#define PMC_BASE (PMC_PHYS_BASE + PMC_OFFSET)
+#define PROC_MON_BASE (PROC_MON_PHYS_BASE + PROC_MON_OFFSET)
+
+#define TIMR_BASE (PERF_PHYS_BASE + TIMR_OFFSET)
+#define WDTIMR0_BASE (PERF_PHYS_BASE + WDTIMR0_OFFSET)
+
+#define BIUCFG_BASE (BIUCFG_PHYS_BASE + BIUCFG_OFFSET)
+
+#ifndef __ASSEMBLER__
+
+/*
+ * Power Management Control
+ */
+typedef struct PmcCtrlReg {
+ /* 0x00 */
+ uint32 l1Irq4keMask;
+ uint32 l1Irq4keStatus;
+ uint32 l1IrqMipsMask;
+ uint32 l1IrqMipsStatus;
+ /* 0x10 */
+ uint32 l2IrqGpMask;
+ uint32 l2IrqGpStatus;
+ uint32 gpTmr0Ctl;
+ uint32 gpTmr0Cnt;
+ /* 0x20 */
+ uint32 gpTmr1Ctl;
+ uint32 gpTmr1Cnt;
+ uint32 hostMboxIn;
+ uint32 hostMboxOut;
+ /* 0x30 */
+#define PMC_CTRL_GP_FLASH_BOOT_STALL 0x00000080
+ uint32 gpOut;
+ uint32 gpIn;
+ uint32 gpInIrqMask;
+ uint32 gpInIrqStatus;
+ /* 0x40 */
+ uint32 dmaCtrl;
+ uint32 dmaStatus;
+ uint32 dma0_3FifoStatus;
+ uint32 unused0[3]; /* 0x4c-0x57 */
+ /* 0x58 */
+ uint32 l1IrqMips1Mask;
+ uint32 diagControl;
+ /* 0x60 */
+ uint32 diagHigh;
+ uint32 diagLow;
+ uint32 badAddr;
+ uint32 addr1WndwMask;
+ /* 0x70 */
+ uint32 addr1WndwBaseIn;
+ uint32 addr1WndwBaseOut;
+ uint32 addr2WndwMask;
+ uint32 addr2WndwBaseIn;
+ /* 0x80 */
+ uint32 addr2WndwBaseOut;
+ uint32 scratch;
+ uint32 tm;
+ uint32 softResets;
+ /* 0x90 */
+ uint32 eb2ubusTimeout;
+ uint32 m4keCoreStatus;
+ uint32 gpInIrqSense;
+ uint32 ubSlaveTimeout;
+ /* 0xa0 */
+ uint32 diagEn;
+ uint32 devTimeout;
+ uint32 ubusErrorOutMask;
+ uint32 diagCaptStopMask;
+ /* 0xb0 */
+ uint32 revId;
+ uint32 gpTmr2Ctl;
+ uint32 gpTmr2Cnt;
+ uint32 legacyMode;
+ /* 0xc0 */
+ uint32 smisbMonitor;
+ uint32 diagCtrl;
+ uint32 diagStat;
+ uint32 diagMask;
+ /* 0xd0 */
+ uint32 diagRslt;
+ uint32 diagCmp;
+ uint32 diagCapt;
+ uint32 diagCnt;
+ /* 0xe0 */
+ uint32 diagEdgeCnt;
+ uint32 unused1[4]; /* 0xe4-0xf3 */
+ /* 0xf4 */
+ uint32 iopPeriphBaseAddr;
+ uint32 lfsr;
+ uint32 unused2; /* 0xfc-0xff */
+} PmcCtrlReg;
+
+typedef struct PmcOutFifoReg {
+ uint32 msgCtrl; /* 0x00 */
+ uint32 msgSts; /* 0x04 */
+ uint32 unused[14]; /* 0x08-0x3f */
+ uint32 msgData[16]; /* 0x40-0x7c */
+} PmcOutFifoReg;
+
+typedef struct PmcInFifoReg {
+ uint32 msgCtrl; /* 0x00 */
+ uint32 msgSts; /* 0x04 */
+ uint32 unused[13]; /* 0x08-0x3b */
+ uint32 msgLast; /* 0x3c */
+ uint32 msgData[16]; /* 0x40-0x7c */
+} PmcInFifoReg;
+
+typedef struct PmcDmaReg {
+ /* 0x00 */
+ uint32 src;
+ uint32 dest;
+ uint32 cmdList;
+ uint32 lenCtl;
+ /* 0x10 */
+ uint32 rsltSrc;
+ uint32 rsltDest;
+ uint32 rsltHcs;
+ uint32 rsltLenStat;
+} PmcDmaReg;
+
+typedef struct PmcTokenReg {
+ /* 0x00 */
+ uint32 bufSize;
+ uint32 bufBase;
+ uint32 idx2ptrIdx;
+ uint32 idx2ptrPtr;
+ /* 0x10 */
+ uint32 unused[2];
+ uint32 bufSize2;
+} PmcTokenReg;
+
+typedef struct PmcPerfPowReg {
+ /* 0x00 */
+ uint32 dcacheHit;
+ uint32 dcacheMiss;
+ uint32 icacheHit;
+ uint32 icacheMiss;
+ /* 0x10 */
+ uint32 instnComplete;
+ uint32 wtbMerge;
+ uint32 wtbNoMerge;
+ uint32 itlbHit;
+ /* 0x20 */
+ uint32 itlbMiss;
+ uint32 dtlbHit;
+ uint32 dtlbMiss;
+ uint32 jtlbHit;
+ /* 0x30 */
+ uint32 jtlbMiss;
+ uint32 powerSubZone;
+ uint32 powerMemPda;
+ uint32 freqScalarCtrl;
+ /* 0x40 */
+ uint32 freqScalarMask;
+} PmcPerfPowReg;
+
+typedef struct PmcDQMReg {
+ /* 0x00 */
+ uint32 cfg;
+ uint32 _4keLowWtmkIrqMask;
+ uint32 mipsLowWtmkIrqMask;
+ uint32 lowWtmkIrqMask;
+ /* 0x10 */
+ uint32 _4keNotEmptyIrqMask;
+ uint32 mipsNotEmptyIrqMask;
+ uint32 notEmptyIrqSts;
+ uint32 queueRst;
+ /* 0x20 */
+ uint32 notEmptySts;
+ uint32 nextAvailMask;
+ uint32 nextAvailQueue;
+ uint32 mips1LowWtmkIrqMask;
+ /* 0x30 */
+ uint32 mips1NotEmptyIrqMask;
+ uint32 autoSrcPidInsert;
+} PmcDQMReg;
+
+typedef struct PmcCntReg {
+ uint32 cntr[10];
+ uint32 unused[6]; /* 0x28-0x3f */
+ uint32 cntrIrqMask;
+ uint32 cntrIrqSts;
+} PmcCntReg;
+
+typedef struct PmcDqmQCtrlReg {
+ uint32 size;
+ uint32 cfga;
+ uint32 cfgb;
+ uint32 cfgc;
+} PmcDqmQCtrlReg;
+
+typedef struct PmcDqmQDataReg {
+ uint32 word[4];
+} PmcDqmQDataReg;
+
+typedef struct PmcDqmQMibReg {
+ uint32 qNumFull[32];
+ uint32 qNumEmpty[32];
+ uint32 qNumPushed[32];
+} PmcDqmQMibReg;
+
+#define PVTMON_REG
+typedef struct {
+ uint32 control; // 0x100
+ uint32 reserved; // 0x104
+ uint32 cfg_lo; // 0x108
+ uint32 reserved1; // 0x10c
+ uint32 adc_data; // 0x110
+ uint32 vref_data; // 0x114
+ uint32 reserved2[2]; // 0x118
+ uint32 ascan_config; // 0x120
+ uint32 reserved3[119];
+} pvtmon_regs;
+
+typedef struct Pmc {
+ uint32 baseReserved; /* 0x0000 */
+ uint32 unused0[1023];
+ PmcCtrlReg ctrl; /* 0x1000 */
+
+ PmcOutFifoReg outFifo; /* 0x1100 */
+ uint32 unused1[32]; /* 0x1180-0x11ff */
+ PmcInFifoReg inFifo; /* 0x1200 */
+ uint32 unused2[32]; /* 0x1280-0x12ff */
+
+ PmcDmaReg dma[2]; /* 0x1300 */
+ uint32 unused3[48]; /* 0x1340-0x13ff */
+
+ PmcTokenReg token; /* 0x1400 */
+ uint32 unused4[121]; /* 0x141c-0x15ff */
+
+ PmcPerfPowReg perfPower; /* 0x1600 */
+ uint32 unused5[47]; /* 0x1644-0x16ff */
+
+ uint32 msgId[32]; /* 0x1700 */
+ uint32 unused6[32]; /* 0x1780-0x17ff */
+
+ PmcDQMReg dqm; /* 0x1800 */
+ uint32 unused7[50]; /* 0x1838-0x18ff */
+
+ PmcCntReg hwCounter; /* 0x1900 */
+ uint32 unused8[46]; /* 0x1948-0x19ff */
+
+ PmcDqmQCtrlReg dqmQCtrl[32]; /* 0x1a00 */
+ PmcDqmQDataReg dqmQData[32]; /* 0x1c00 */
+ uint32 unused9[64]; /* 0x1e00-0x1eff */
+
+ uint32 qStatus[32]; /* 0x1f00 */
+ uint32 unused10[32]; /* 0x1f80-0x1fff */
+
+ PmcDqmQMibReg qMib; /* 0x2000 */
+ uint32 unused11[1952]; /* 0x2180-0x3ffff */
+
+ uint32 sharedMem[512]; /* 0x4000-0x47ff */
+ uint32 unused12[126528]; /* 0x4800-0x80100 */
+
+ pvtmon_regs pvtmon[2];
+} Pmc;
+
+#define PMC ((volatile Pmc * const) PMC_BASE)
+
+/*
+ * Process Monitor Module
+ */
+typedef struct PMRingOscillatorControl {
+ uint32 control;
+ uint32 en_lo;
+ uint32 en_mid;
+ uint32 en_hi;
+ uint32 idle_lo;
+ uint32 idle_mid;
+ uint32 idle_hi;
+} PMRingOscillatorControl;
+
+#define RCAL_0P25UM_HORZ 0
+#define RCAL_0P25UM_VERT 1
+#define RCAL_0P5UM_HORZ 2
+#define RCAL_0P5UM_VERT 3
+#define RCAL_1UM_HORZ 4
+#define RCAL_1UM_VERT 5
+#define PMMISC_RMON_EXT_REG ((RCAL_1UM_VERT + 1)/2)
+#define PMMISC_RMON_VALID_MASK (0x1<<16)
+typedef struct PMMiscControl {
+ uint32 gp_out;
+ uint32 clock_select;
+ uint32 unused[2];
+ uint32 misc[4];
+} PMMiscControl;
+
+typedef struct PMSSBMasterControl {
+ uint32 control;
+#define PMC_SSBM_CONTROL_SSB_START (1<<15)
+#define PMC_SSBM_CONTROL_SSB_ADPRE (1<<13)
+#define PMC_SSBM_CONTROL_SSB_EN (1<<12)
+#define PMC_SSBM_CONTROL_SSB_CMD_SHIFT (10)
+#define PMC_SSBM_CONTROL_SSB_CMD_MASK (0x3 << PMC_SSBM_CONTROL_SSB_CMD_SHIFT)
+#define PMC_SSBM_CONTROL_SSB_CMD_READ (2)
+#define PMC_SSBM_CONTROL_SSB_CMD_WRITE (1)
+#define PMC_SSBM_CONTROL_SSB_ADDR_SHIFT (0)
+#define PMC_SSBM_CONTROL_SSB_ADDR_MASK (0x3ff << PMC_SSBM_CONTROL_SSB_ADDR_SHIFT)
+ uint32 wr_data;
+ uint32 rd_data;
+} PMSSBMasterControl;
+
+typedef struct PMEctrControl {
+ uint32 control;
+ uint32 interval;
+ uint32 thresh_lo;
+ uint32 thresh_hi;
+ uint32 count;
+} PMEctrControl;
+
+typedef struct PMBMaster {
+ uint32 ctrl;
+#define PMC_PMBM_START (1 << 31)
+#define PMC_PMBM_TIMEOUT (1 << 30)
+#define PMC_PMBM_SLAVE_ERR (1 << 29)
+#define PMC_PMBM_BUSY (1 << 28)
+#define PMC_PMBM_Read (0 << 20)
+#define PMC_PMBM_Write (1 << 20)
+ uint32 wr_data;
+ uint32 timeout;
+ uint32 rd_data;
+ uint32 unused[4];
+} PMBMaster;
+
+typedef struct PMAPVTMONControl {
+ uint32 control;
+ uint32 reserved;
+ uint32 cfg_lo;
+ uint32 cfg_hi;
+ uint32 data;
+ uint32 vref_data;
+ uint32 unused[2];
+ uint32 ascan_cfg;
+ uint32 warn_temp;
+ uint32 reset_temp;
+ uint32 temp_value;
+ uint32 data1_value;
+ uint32 data2_value;
+ uint32 data3_value;
+} PMAPVTMONControl;
+
+typedef struct PMUBUSCfg {
+ uint32 window[8];
+ uint32 control;
+} PMUBUSCfg;
+
+typedef struct ProcessMonitorRegs {
+ uint32 MonitorCtrl; /* 0x00 */
+ uint32 unused0[7];
+ PMRingOscillatorControl ROSC; /* 0x20 */
+ uint32 unused1;
+ PMMiscControl Misc; /* 0x40 */
+ PMSSBMasterControl SSBMaster; /* 0x60 */
+ uint32 unused2[5];
+ PMEctrControl Ectr; /* 0x80 */
+ uint32 unused3[11];
+ PMBMaster PMBM[2]; /* 0xc0 */
+ PMAPVTMONControl APvtmonCtrl; /* 0x100 - 0x13b */
+ uint32 unused4[41];
+ PMUBUSCfg UBUSCfg; /* 0x1e0 */
+} ProcessMonitorRegs;
+
+#define PROCMON ((volatile ProcessMonitorRegs * const) PROC_MON_BASE)
+
+/*
+ * Timer
+ */
+#define TIMER_64BIT
+typedef struct Timer {
+ uint64 TimerCtl0; /* 0x00 */
+ uint64 TimerCtl1; /* 0x08 */
+ uint64 TimerCtl2; /* 0x10 */
+ uint64 TimerCtl3; /* 0x18 */
+#define TIMERENABLE (1ULL << 63)
+#define RSTCNTCLR (1ULL << 62)
+ uint64 TimerCnt0; /* 0x20 */
+ uint64 TimerCnt1; /* 0x28 */
+ uint64 TimerCnt2; /* 0x30 */
+ uint64 TimerCnt3; /* 0x38 */
+#define TIMER_COUNT_MASK 0x3FFFFFFFFFFFFFFFULL
+ uint32 TimerMask; /* 0x40 */
+#define TIMER0EN 0x01
+#define TIMER1EN 0x02
+#define TIMER2EN 0x04
+#define TIMER3EN 0x08
+ uint32 TimerInts; /* 0x44 */
+#define TIMER0 0x01
+#define TIMER1 0x02
+#define TIMER2 0x04
+#define TIMER3 0x08
+ uint32 ResetReason;/* 0x4c */
+ uint32 spare[3]; /* 0x50 - 0x5b */
+ uint32 reserved1[9]; /* 0x5c - 0x7f */
+} Timer;
+
+#define TIMER ((volatile Timer * const) TIMR_BASE)
+
+typedef struct WDTimer {
+ uint32 WatchDogDefCount;
+ /* Write 0xff00 0x00ff to Start timer
+ * Write 0xee00 0x00ee to Stop and re-load default count
+ * Read from this register returns current watch dog count
+ */
+ uint32 WatchDogCtl;
+
+ /* Number of 50-MHz ticks for WD Reset pulse to last */
+ uint32 WDResetCount;
+
+ uint32 SoftRst;
+#define SOFT_RESET 0x00000001
+ uint32 WDAccessCtl;
+} WDTimer;
+
+#define WDTIMER0 ((volatile WDTimer * const) WDTIMR0_BASE)
+
+typedef struct BIUCFG_Access {
+ uint32 permission; /* 0x0 */
+ uint32 sbox; /* 0x4 */
+ uint32 cpu_defeature; /* 0x8 */
+ uint32 dbg_security; /* 0xc */
+ uint32 rsvd1[32]; /* 0x10 - 0x8f */
+ uint64 violation[2]; /* 0x90 - 0x9f */
+ uint32 ts_access[2]; /* 0xa0 - 0xa7 */
+ uint32 rsvd2[22]; /* 0xa8 - 0xff */
+}BIUCFG_Access;
+
+typedef struct BIUCFG_Cluster {
+ uint32 permission; /* 0x0 */
+ uint32 config; /* 0x4 */
+ uint32 status; /* 0x8 */
+ uint32 control; /* 0xc */
+ uint32 cpucfg; /* 0x10 */
+ uint32 dbgrom; /* 0x14 */
+ uint32 rsvd1[2]; /* 0x18 - 0x1f */
+ uint64 rvbar_addr[4]; /* 0x20 - 0x3f */
+ uint32 rsvd2[48]; /* 0x40 - 0xff */
+}BIUCFG_Cluster;
+
+typedef struct BIUCFG_Bac {
+ uint32 bac_permission; /* 0x00 */
+ uint32 bac_periphbase; /* 0x04 */
+ uint32 rsvd[2]; /* 0x08 - 0x0f */
+ uint32 bac_event; /* 0x10 */
+ uint32 rsvd_1[3]; /* 0x14 - 0x1f */
+ uint32 bac_ccicfg; /* 0x20 */
+ uint32 bac_cciaddr; /* 0x24 */
+ uint32 rsvd_2[4]; /* 0x28 - 0x37 */
+ uint32 bac_ccievs2; /* 0x38 */
+ uint32 bac_ccievs3; /* 0x3c */
+ uint32 bac_ccievs4; /* 0x40 */
+ uint32 rsvd_3[3]; /* 0x44 - 0x4f */
+ uint32 bac_ccievm0; /* 0x50 */
+ uint32 bac_ccievm1; /* 0x54 */
+ uint32 rsvd_4[2]; /* 0x58 - 0x5f */
+ uint32 bac_dapapbcfg; /* 0x60 */
+ uint32 bac_status; /* 0x64 */
+ uint32 rsvd_5[2]; /* 0x68 - 0x6f */
+ uint32 cpu_therm_irq_cfg; /* 0x70 */
+ uint32 cpu_therm_threshold_cfg; /* 0x74 */
+ uint32 rsvd_6; /* 0x78 */
+ uint32 cpu_therm_temp; /* 0x7c */
+ uint32 rsvd_7[32]; /* 0x80 - 0xff */
+} BIUCFG_Bac;
+
+typedef struct BIUCFG_Aux {
+ uint32 aux_permission; /* 0x00 */
+ uint32 rsvd[3]; /* 0x04 - 0x0f */
+ uint32 c0_clk_control; /* 0x10 */
+ uint32 c0_clk_ramp; /* 0x14 */
+ uint32 c0_clk_pattern; /* 0x18 */
+ uint32 rsvd_1; /* 0x1c */
+ uint32 c1_clk_control; /* 0x20 */
+ uint32 c1_clk_ramp; /* 0x24 */
+ uint32 c1_clk_pattern; /* 0x28 */
+ uint32 rsvd_2[53]; /* 0x2c - 0xff */
+} BIUCFG_Aux;
+
+typedef struct BIUCFG {
+ BIUCFG_Access access; /* 0x0 - 0xff*/
+ BIUCFG_Cluster cluster[2]; /* 0x100 - 0x2ff*/
+ BIUCFG_Bac bac; /* 0x300 - 0x3ff */
+ uint32 anonymous[192]; /* 0x400 - 0x6ff */
+ BIUCFG_Aux aux; /* 0x700 - 0x7ff */
+ uint32 anonymous_1[2560]; /* 0x800 - 0x2fff */
+}BIUCFG;
+
+#define BIUCFG ((volatile BIUCFG * const) BIUCFG_BASE)
+
+#endif /* __ASSEMBLER__ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/63178_map_part.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/63178_map_part.h
new file mode 100755
index 0000000000..6fcd3d8cd9
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/63178_map_part.h
@@ -0,0 +1,503 @@
+/*
+<:copyright-BRCM:2015:DUAL/GPL:standard
+
+ Copyright (c) 2015 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+
+*/
+
+#ifndef __BCM63178_MAP_PART_H
+#define __BCM63178_MAP_PART_H
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "bcmtypes.h"
+
+#define MEMC_PHYS_BASE 0x80180000
+#define MEMC_SIZE 0x24000
+
+#define PMC_PHYS_BASE 0x80200000
+#define PMC_SIZE 0x00200000
+#define PMC_OFFSET 0x00100000
+#define PROC_MON_OFFSET 0x00100000
+#define PMB_OFFSET 0x00120100
+
+#define PERF_PHYS_BASE 0xff800000
+#define PERF_SIZE 0x13000
+#define TIMR_OFFSET 0x0400
+#define WDTIMR0_OFFSET 0x0480
+#define WDTIMR1_OFFSET 0x04c0
+
+#define BIUCFG_PHYS_BASE 0x81060000
+#define BIUCFG_SIZE 0x3000
+#define BIUCFG_OFFSET 0x0000
+
+#define BOOTLUT_PHYS_BASE 0xffff0000
+#define BOOTLUT_SIZE 0x1000
+
+#define GIC_PHYS_BASE 0x81000000
+#define GIC_SIZE 0x10000
+#define GIC_OFFSET 0x0000
+#define GICD_OFFSET 0x1000
+#define GICC_OFFSET 0x2000
+
+#define PMC_BASE (PMC_PHYS_BASE + PMC_OFFSET)
+#define PMB_BASE (PMC_PHYS_BASE + PMB_OFFSET)
+#define PROC_MON_BASE (PMC_PHYS_BASE + PROC_MON_OFFSET)
+
+#define WDTIMR0_BASE (PERF_PHYS_BASE + WDTIMR0_OFFSET)
+#define TIMR_BASE (PERF_PHYS_BASE + TIMR_OFFSET)
+
+#define BIUCFG_BASE (BIUCFG_PHYS_BASE + BIUCFG_OFFSET)
+
+
+#ifndef __ASSEMBLER__
+
+/*
+ * Power Management Control
+ */
+typedef struct PmcCtrlReg {
+ uint32 gpTmr0Ctl; /* 0x018 */
+ uint32 gpTmr0Cnt; /* 0x01c */
+ uint32 gpTmr1Ctl; /* 0x020 */
+ uint32 gpTmr1Cnt; /* 0x024 */
+ uint32 hostMboxIn; /* 0x028 */
+ uint32 hostMboxOut; /* 0x02c */
+ uint32 reserved[4]; /* 0x030 */
+ uint32 dmaCtrl; /* 0x040 */
+ uint32 dmaStatus; /* 0x044 */
+ uint32 dma0_3FifoStatus; /* 0x048 */
+ uint32 reserved1[4]; /* 0x04c */
+ uint32 diagControl; /* 0x05c */
+ uint32 diagHigh; /* 0x060 */
+ uint32 diagLow; /* 0x064 */
+ uint32 reserved8; /* 0x068 */
+ uint32 addr1WndwMask; /* 0x06c */
+ uint32 addr1WndwBaseIn; /* 0x070 */
+ uint32 addr1WndwBaseOut; /* 0x074 */
+ uint32 addr2WndwMask; /* 0x078 */
+ uint32 addr2WndwBaseIn; /* 0x07c */
+ uint32 addr2WndwBaseOut; /* 0x080 */
+ uint32 scratch; /* 0x084 */
+ uint32 reserved9; /* 0x088 */
+ uint32 softResets; /* 0x08c */
+ uint32 reserved2; /* 0x090 */
+ uint32 m4keCoreStatus; /* 0x094 */
+ uint32 reserved3; /* 0x098 */
+ uint32 ubSlaveTimeout; /* 0x09c */
+ uint32 diagEn; /* 0x0a0 */
+ uint32 devTimeout; /* 0x0a4 */
+ uint32 ubusErrorOutMask; /* 0x0a8 */
+ uint32 diagCaptStopMask; /* 0x0ac */
+ uint32 revId; /* 0x0b0 */
+ uint32 reserved4[4]; /* 0x0b4 */
+ uint32 diagCtrl; /* 0x0c4 */
+ uint32 diagStat; /* 0x0c8 */
+ uint32 diagMask; /* 0x0cc */
+ uint32 diagRslt; /* 0x0d0 */
+ uint32 diagCmp; /* 0x0d4 */
+ uint32 diagCapt; /* 0x0d8 */
+ uint32 diagCnt; /* 0x0dc */
+ uint32 diagEdgeCnt; /* 0x0e0 */
+ uint32 reserved5[4]; /* 0x0e4 */
+ uint32 smisc_bus_config; /* 0x0f4 */
+ uint32 lfsr; /* 0x0f8 */
+ uint32 dqm_pac_lock; /* 0x0fc */
+ uint32 l1_irq_4ke_mask; /* 0x100 */
+ uint32 l1_irq_4ke_status; /* 0x104 */
+ uint32 l1_irq_mips_mask; /* 0x108 */
+ uint32 l1_irq_mips_status; /* 0x10c */
+ uint32 l1_irq_mips1_mask; /* 0x110 */
+ uint32 reserved6[3]; /* 0x114 */
+ uint32 l2_irq_gp_mask; /* 0x120 */
+ uint32 l2_irq_gp_status; /* 0x124 */
+ uint32 l2_irq_gp_set; /* 0x128 */
+ uint32 reserved7; /* 0x12c */
+ uint32 gp_in_irq_mask; /* 0x130 */
+ uint32 gp_in_irq_status; /* 0x134 */
+ uint32 gp_in_irq_set; /* 0x138 */
+ uint32 gp_in_irq_sense; /* 0x13c */
+ uint32 gp_in; /* 0x140 */
+ uint32 gp_out; /* 0x144 */
+} PmcCtrlReg;
+
+typedef struct PmcDmaReg {
+ /* 0x00 */
+ uint32 src;
+ uint32 dest;
+ uint32 cmdList;
+ uint32 lenCtl;
+ /* 0x10 */
+ uint32 rsltSrc;
+ uint32 rsltDest;
+ uint32 rsltHcs;
+ uint32 rsltLenStat;
+} PmcDmaReg;
+
+typedef struct PmcTokenReg {
+ /* 0x00 */
+ uint32 bufSize;
+ uint32 bufBase;
+ uint32 idx2ptrIdx;
+ uint32 idx2ptrPtr;
+ /* 0x10 */
+ uint32 unused[2];
+ uint32 bufSize2;
+} PmcTokenReg;
+
+typedef struct PmcPerfPowReg {
+ uint32 freqScalarCtrl; /* 0x3c */
+ uint32 freqScalarMask; /* 0x40 */
+} PmcPerfPowReg;
+
+typedef struct PmcDQMPac {
+ uint32 dqmPac[32];
+} PmcDQMPac;
+
+typedef struct PmcDQMReg {
+ uint32 cfg; /* 0x1c00 */
+ uint32 _4keLowWtmkIrqMask; /* 0x1c04 */
+ uint32 mipsLowWtmkIrqMask; /* 0x1c08 */
+ uint32 lowWtmkIrqMask; /* 0x1c0c */
+ uint32 _4keNotEmptyIrqMask; /* 0x1c10 */
+ uint32 mipsNotEmptyIrqMask; /* 0x1c14 */
+ uint32 notEmptyIrqSts; /* 0x1c18 */
+ uint32 queueRst; /* 0x1c1c */
+ uint32 notEmptySts; /* 0x1c20 */
+ uint32 nextAvailMask; /* 0x1c24 */
+ uint32 nextAvailQueue; /* 0x1c28 */
+ uint32 mips1LowWtmkIrqMask; /* 0x1c2c */
+ uint32 mips1NotEmptyIrqMask; /* 0x1c30 */
+ uint32 autoSrcPidInsert; /* 0x1c34 */
+ uint32 timerIrqStatus; /* 0x1c38 */
+ uint32 timerStatus; /* 0x1c3c */
+ uint32 _4keTimerIrqMask; /* 0x1c40 */
+ uint32 mipsTimerIrqMask; /* 0x1c44 */
+ uint32 mips1TimerIrqMask; /* 0x1c48 */
+} PmcDQMReg;
+
+typedef struct PmcCntReg {
+ uint32 cntr[10];
+ uint32 unused[6]; /* 0x28-0x3f */
+ uint32 cntrIrqMask;
+ uint32 cntrIrqSts;
+} PmcCntReg;
+
+typedef struct PmcDqmQCtrlReg {
+ uint32 size;
+ uint32 cfga;
+ uint32 cfgb;
+ uint32 cfgc;
+} PmcDqmQCtrlReg;
+
+typedef struct PmcDqmQDataReg {
+ uint32 word[4];
+} PmcDqmQDataReg;
+
+typedef struct PmcDqmQMibReg {
+ uint32 qNumFull[32];
+ uint32 qNumEmpty[32];
+ uint32 qNumPushed[32];
+} PmcDqmQMibReg;
+
+typedef struct SSBMaster {
+ uint32 ssbmControl; /* 0x0060 */
+ uint32 ssbmWrData; /* 0x0064 */
+ uint32 ssbmRdData; /* 0x0068 */
+ uint32 ssbmStatus; /* 0x006c */
+} SSBMaster;
+
+typedef struct PmmReg {
+ uint32 memPowerCtrl; /* 0x0000 */
+ uint32 regSecurityConfig; /* 0x0004 */
+} PmmReg;
+
+typedef struct keyholeReg {
+ uint32 ctrlSts;
+ uint32 wrData;
+ uint32 mutex;
+ uint32 rdData;
+} keyholeReg;
+
+typedef struct PmbBus {
+ uint32 config; /* 0x0100 */
+ uint32 arbiter; /* 0x0104 */
+ uint32 timeout; /* 0x0108 */
+ uint32 unused1; /* 0x010c */
+ keyholeReg keyhole[4]; /* 0x0110-0x014f */
+ uint32 unused2[44]; /* 0x0150-0x01ff */
+ uint32 map[64]; /* 0x0200-0x02ff */
+}PmbBus;
+
+typedef struct CoreCtrl {
+ uint32 coreEnable; /* 0x0400 */
+ uint32 autoresetControl; /* 0x0404 */
+ uint32 coreIdle; /* 0x0408 */
+ uint32 coreResetCause; /* 0x040c */
+ uint32 memPwrDownCtrl0; /* 0x0410 */
+ uint32 memPwrDownSts0; /* 0x0414 */
+ uint32 memPwrDownCtrl1; /* 0x0418 */
+ uint32 memPwrDownSts1; /* 0x041c */
+ uint32 sysFlg0Status; /* 0x0420 */
+ uint32 sysFlg0Set; /* 0x0424 */
+ uint32 sysFlg0Clear; /* 0x0428 */
+ uint32 unused1; /* 0x042c */
+ uint32 usrFlg0Status; /* 0x0430 */
+ uint32 usrFlg0Set; /* 0x0434 */
+ uint32 usrFlg0Clear; /* 0x0438 */
+ uint32 unused2; /* 0x043c */
+ uint32 subsystemRev; /* 0x0440 */
+ uint32 resetVector; /* 0x0444 */
+} CoreCtrl;
+
+typedef struct CoreState {
+ uint32 sysMbx[8]; /* 0x0480 */
+ uint32 usrMbx[8]; /* 0x04a0 */
+ uint32 sysMtx[4]; /* 0x04c0 */
+ uint32 usrMtx[8]; /* 0x04d0 */
+} CoreState;
+
+typedef struct CoreIntr {
+ uint32 irqStatus; /* 0x0500 */
+ uint32 irqSet; /* 0x0504 */
+ uint32 irqClear; /* 0x0508 */
+ uint32 unused1; /* 0x050c */
+ uint32 srqStatus; /* 0x0510 */
+ uint32 srqSet; /* 0x0514 */
+ uint32 srqClear; /* 0x0518 */
+ uint32 unused2; /* 0x051c */
+ uint32 drqStatus; /* 0x0520 */
+ uint32 drqSet; /* 0x0524 */
+ uint32 drqClear; /* 0x0528 */
+ uint32 unused3; /* 0x052c */
+ uint32 frqStatus; /* 0x0530 */
+ uint32 frqSet; /* 0x0534 */
+ uint32 frqClear; /* 0x0538 */
+ uint32 unused4; /* 0x053c */
+ uint32 hostIrqLatched; /* 0x0540 */
+ uint32 hostIrqSet; /* 0x0544 */
+ uint32 hostIrqClear; /* 0x0548 */
+ uint32 hostIrqEnable; /* 0x054c */
+ uint32 obusFaultStatus; /* 0x0550 */
+ uint32 obusFaultClear; /* 0x0554 */
+ uint32 obusFaultAddr; /* 0x0558 */
+} CoreIntr;
+
+typedef struct CoreProfile {
+ uint32 mutex; /* 0x0580 */
+ uint32 lastConfPcLo; /* 0x0584 */
+ uint32 lastConfPcHi; /* 0x0588 */
+ uint32 lastPcLo; /* 0x058c */
+ uint32 lastPcHi; /* 0x0590 */
+ uint32 braTargetPc0Lo; /* 0x0594 */
+ uint32 braTargetPc0Hi; /* 0x0598 */
+ uint32 braTargetPc1Lo; /* 0x059c */
+ uint32 braTargetPc1Hi; /* 0x05a0 */
+ uint32 braTargetPc2Lo; /* 0x05a4 */
+ uint32 braTargetPc2Hi; /* 0x05a8 */
+ uint32 braTargetPc3Lo; /* 0x05ac */
+ uint32 braTargetPc3Hi; /* 0x05b0 */
+ uint32 unused[3]; /* 0x05b4-0x05bf */
+ uint32 profSampleW[4]; /* 0x05c0 */
+} CoreProfile;
+
+typedef struct MaestroMisc {
+ CoreCtrl coreCtrl; /* 0x0400 */
+ uint32 unused1[14]; /* 0x0448-0x047f */
+ CoreState coreState; /* 0x0480 */
+ uint32 unused2[4]; /* 0x04f0-0x04ff */
+ CoreIntr interrupt; /* 0x0500 */
+ uint32 unused3[9]; /* 0x055c-0x057f */
+ CoreProfile profile; /* 0x0580 */
+} MaestroMisc;
+
+typedef struct Pmc {
+ uint32 unused0[1030];
+ PmcCtrlReg ctrl; /* 0x1018 */
+ uint32 unused1[622]; /* 0x1148-0x1cff */
+ PmcDQMPac dqmPac; /* 0x1b00 */
+ uint32 unused5[32]; /* 0x1b80-0x1bff */
+ PmcDQMReg dqm; /* 0x1c00 */
+ uint32 unused6[749]; /* 0x1c4c-0x27ff */
+ uint32 qStatus[32]; /* 0x2800 */
+ uint32 unused7[480]; /* 0x2880-0x2fff */
+ PmcDqmQMibReg qMib; /* 0x3000 */
+ uint32 unused8[928]; /* 0x3180-0x3fff */
+ PmcDqmQCtrlReg dqmQCtrl[8]; /* 0x4000 */
+ uint32 unused9[992]; /* 0x4080-0x4fff */
+ PmcDqmQDataReg dqmQData[8]; /* 0x5000 */
+} Pmc;
+#define PMC ((volatile Pmc * const) PMC_BASE)
+
+typedef struct Procmon {
+ uint32 unused00[256];
+ MaestroMisc maestroReg; /* 0x00400 */
+ uint32 unused10[32396]; /* 0x005d0-0x1ffff */
+ PmmReg pmm; /* 0x20000 */
+ uint32 unused11[22]; /* 0x20008-0x2005f */
+ SSBMaster ssbMasterCtrl; /* 0x20060 */
+ uint32 unused12[36]; /* 0x20070-0x200ff */
+ PmbBus pmb; /* 0x20100 */
+ uint32 unused13[32576]; /* 0x20300-0x3ffff */
+ uint32 qsm[128]; /* 0x40000-0x401ff */
+ uint32 unused14[65408]; /* 0x40200-0x7ffff */
+ uint32 dtcm[1024]; /* 0x80000-0x80fff */
+} Procmon;
+#define PROCMON ((volatile Procmon * const) PROC_MON_BASE)
+
+typedef struct PMSSBMasterControl {
+ uint32 control;
+ uint32 wr_data;
+ uint32 rd_data;
+} PMSSBMasterControl;
+
+typedef struct
+{
+ uint32 control;
+#define PMC_PMBM_START (1 << 31)
+#define PMC_PMBM_TIMEOUT (1 << 30)
+#define PMC_PMBM_SLAVE_ERR (1 << 29)
+#define PMC_PMBM_BUSY (1 << 28)
+#define PMC_PMBM_BUS_SHIFT (20)
+#define PMC_PMBM_Read (0 << 24)
+#define PMC_PMBM_Write (1 << 24)
+ uint32 wr_data;
+ uint32 mutex;
+ uint32 rd_data;
+} PMB_keyhole_reg;
+
+typedef struct PMBMaster {
+ uint32 config;
+#define PMB_NUM_REGS_SHIFT (20)
+#define PMB_NUM_REGS_MASK (0x3ff)
+ uint32 arbitger;
+ uint32 timeout;
+ uint32 reserved;
+ PMB_keyhole_reg keyhole[4];
+ uint32 reserved1[44];
+ uint32 map[64];
+} PMBMaster;
+#define PMB ((volatile PMBMaster * const) PMB_BASE)
+
+/* WatchDog */
+typedef struct WDTimer {
+ uint32 WatchDogDefCount;/* Write 0xff00 0x00ff to Start timer
+ * Write 0xee00 0x00ee to Stop and re-load default count
+ * * * Read from this register returns current watch dog count
+ * * */
+ uint32 WatchDogCtl;
+
+ /* Number of 50-MHz ticks for WD Reset pulse to last */
+ uint32 WDResetCount;
+
+#define SOFT_RESET 0x00000001
+ uint32 WDTimerCtl;
+
+ uint32 WDAccessCtl;
+} WDTimer;
+
+#define TIMER ((volatile Timer * const) TIMR_BASE)
+#define WDTIMER0 ((volatile WDTimer * const) WDTIMR0_BASE)
+
+
+/* BIU - Bus Interface Unit */
+typedef struct BIUCFG_Access {
+ uint32 permission; /* 0x0 */
+ uint32 sbox; /* 0x4 */
+ uint32 cpu_defeature; /* 0x8 */
+ uint32 dbg_security; /* 0xc */
+ uint32 rsvd1[32]; /* 0x10 - 0x8f */
+ uint64 violation[2]; /* 0x90 - 0x9f */
+ uint32 ts_access[2]; /* 0xa0 - 0xa7 */
+ uint32 rsvd2[22]; /* 0xa8 - 0xff */
+}BIUCFG_Access;
+
+
+
+
+typedef struct BIUCFG_Cluster {
+ uint32 permission; /* 0x0 */
+ uint32 config; /* 0x4 */
+ uint32 status; /* 0x8 */
+ uint32 control; /* 0xc */
+ uint32 cpucfg; /* 0x10 */
+ uint32 dbgrom; /* 0x14 */
+ uint32 rsvd1[2]; /* 0x18 - 0x1f */
+ uint64 rvbar_addr[4]; /* 0x20 - 0x3f */
+ uint32 rsvd2[48]; /* 0x40 - 0xff */
+}BIUCFG_Cluster;
+
+typedef struct BIUCFG_Bac {
+ uint32 bac_permission; /* 0x00 */
+ uint32 bac_periphbase; /* 0x04 */
+ uint32 rsvd[2]; /* 0x08 - 0x0f */
+ uint32 bac_event; /* 0x10 */
+ uint32 rsvd_1[3]; /* 0x14 - 0x1f */
+ uint32 bac_ccicfg; /* 0x20 */
+ uint32 bac_cciaddr; /* 0x24 */
+ uint32 rsvd_2[4]; /* 0x28 - 0x37 */
+ uint32 bac_ccievs2; /* 0x38 */
+ uint32 bac_ccievs3; /* 0x3c */
+ uint32 bac_ccievs4; /* 0x40 */
+ uint32 rsvd_3[3]; /* 0x44 - 0x4f */
+ uint32 bac_ccievm0; /* 0x50 */
+ uint32 bac_ccievm1; /* 0x54 */
+ uint32 rsvd_4[2]; /* 0x58 - 0x5f */
+ uint32 bac_dapapbcfg; /* 0x60 */
+ uint32 bac_status; /* 0x64 */
+ uint32 rsvd_5[2]; /* 0x68 - 0x6f */
+ uint32 cpu_therm_irq_cfg; /* 0x70 */
+ uint32 cpu_therm_threshold_cfg; /* 0x74 */
+ uint32 rsvd_6; /* 0x78 */
+ uint32 cpu_therm_temp; /* 0x7c */
+ uint32 rsvd_7[32]; /* 0x80 - 0xff */
+} BIUCFG_Bac;
+
+typedef struct BIUCFG_Aux {
+ uint32 aux_permission; /* 0x00 */
+ uint32 rsvd[3]; /* 0x04 - 0x0f */
+ uint32 c0_clk_control; /* 0x10 */
+ uint32 c0_clk_ramp; /* 0x14 */
+ uint32 c0_clk_pattern; /* 0x18 */
+ uint32 rsvd_1; /* 0x1c */
+ uint32 c1_clk_control; /* 0x20 */
+ uint32 c1_clk_ramp; /* 0x24 */
+ uint32 c1_clk_pattern; /* 0x28 */
+ uint32 rsvd_2[53]; /* 0x2c - 0xff */
+} BIUCFG_Aux;
+
+typedef struct BIUCFG {
+ BIUCFG_Access access; /* 0x0 - 0xff*/
+ BIUCFG_Cluster cluster[2]; /* 0x100 - 0x2ff*/
+ BIUCFG_Bac bac; /* 0x300 - 0x3ff */
+ uint32 anonymous[192]; /* 0x400 - 0x6ff */
+ BIUCFG_Aux aux; /* 0x700 - 0x7ff */
+ uint32 anonymous_1[2560]; /* 0x800 - 0x2fff */
+}BIUCFG;
+#define BIUCFG ((volatile BIUCFG * const) BIUCFG_BASE)
+
+#endif /* __ASSEMBLER__ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/6756_map_part.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/6756_map_part.h
new file mode 100644
index 0000000000..af314b0866
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/6756_map_part.h
@@ -0,0 +1,504 @@
+/*
+<:copyright-BRCM:2020:DUAL/GPL:standard
+
+ Copyright (c) 2020 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+
+*/
+
+#ifndef __BCM6756_MAP_PART_H
+#define __BCM6756_MAP_PART_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "bcmtypes.h"
+
+#define CHIP_FAMILY_ID_HEX 0x6756
+
+#define MEMC_PHYS_BASE 0x80180000
+#define MEMC_SIZE 0x24000
+
+#define PMC_PHYS_BASE 0x80200000
+#define PMC_SIZE 0x00200000
+#define PMC_OFFSET 0x00100000
+#define PROC_MON_OFFSET 0x00100000
+#define PMB_OFFSET 0x00120100
+
+#define PERF_PHYS_BASE 0xff800000
+#define PERF_SIZE 0x13000
+#define TIMR_OFFSET 0x0400
+#define WDTIMR0_OFFSET 0x0480
+#define WDTIMR1_OFFSET 0x04c0
+
+#define BIU_PHYS_BASE 0x81000000
+#define BIUCFG_PHYS_BASE 0x81060000
+#define BIUCFG_SIZE 0x3000
+#define BIUCFG_OFFSET 0x0000
+
+#define BOOTLUT_PHYS_BASE 0xffff0000
+#define BOOTLUT_SIZE 0x1000
+
+#define GIC_PHYS_BASE 0x81000000
+#define GIC_SIZE 0x10000
+#define GIC_OFFSET 0x0000
+#define GICD_OFFSET 0x1000
+#define GICC_OFFSET 0x2000
+
+#define PMC_BASE (PMC_PHYS_BASE + PMC_OFFSET)
+#define PROC_MON_BASE (PMC_PHYS_BASE + PROC_MON_OFFSET)
+#define PMB_BASE (PMC_PHYS_BASE + PMB_OFFSET)
+#define BIUCFG_BASE (BIUCFG_PHYS_BASE + BIUCFG_OFFSET)
+#define WDTIMR0_BASE (PERF_PHYS_BASE + WDTIMR0_OFFSET)
+
+
+
+#ifndef __ASSEMBLER__
+
+/*
+ * Power Management Control
+ */
+typedef struct PmcCtrlReg {
+ uint32 gpTmr0Ctl; /* 0x018 */
+ uint32 gpTmr0Cnt; /* 0x01c */
+ uint32 gpTmr1Ctl; /* 0x020 */
+ uint32 gpTmr1Cnt; /* 0x024 */
+ uint32 hostMboxIn; /* 0x028 */
+ uint32 hostMboxOut; /* 0x02c */
+ uint32 reserved[4]; /* 0x030 */
+ uint32 dmaCtrl; /* 0x040 */
+ uint32 dmaStatus; /* 0x044 */
+ uint32 dma0_3FifoStatus; /* 0x048 */
+ uint32 reserved1[4]; /* 0x04c */
+ uint32 diagControl; /* 0x05c */
+ uint32 diagHigh; /* 0x060 */
+ uint32 diagLow; /* 0x064 */
+ uint32 reserved8; /* 0x068 */
+ uint32 addr1WndwMask; /* 0x06c */
+ uint32 addr1WndwBaseIn; /* 0x070 */
+ uint32 addr1WndwBaseOut; /* 0x074 */
+ uint32 addr2WndwMask; /* 0x078 */
+ uint32 addr2WndwBaseIn; /* 0x07c */
+ uint32 addr2WndwBaseOut; /* 0x080 */
+ uint32 scratch; /* 0x084 */
+ uint32 reserved9; /* 0x088 */
+ uint32 softResets; /* 0x08c */
+ uint32 reserved2; /* 0x090 */
+ uint32 m4keCoreStatus; /* 0x094 */
+ uint32 reserved3; /* 0x098 */
+ uint32 ubSlaveTimeout; /* 0x09c */
+ uint32 diagEn; /* 0x0a0 */
+ uint32 devTimeout; /* 0x0a4 */
+ uint32 ubusErrorOutMask; /* 0x0a8 */
+ uint32 diagCaptStopMask; /* 0x0ac */
+ uint32 revId; /* 0x0b0 */
+ uint32 reserved4[4]; /* 0x0b4 */
+ uint32 diagCtrl; /* 0x0c4 */
+ uint32 diagStat; /* 0x0c8 */
+ uint32 diagMask; /* 0x0cc */
+ uint32 diagRslt; /* 0x0d0 */
+ uint32 diagCmp; /* 0x0d4 */
+ uint32 diagCapt; /* 0x0d8 */
+ uint32 diagCnt; /* 0x0dc */
+ uint32 diagEdgeCnt; /* 0x0e0 */
+ uint32 reserved5[4]; /* 0x0e4 */
+ uint32 smisc_bus_config; /* 0x0f4 */
+ uint32 lfsr; /* 0x0f8 */
+ uint32 dqm_pac_lock; /* 0x0fc */
+ uint32 l1_irq_4ke_mask; /* 0x100 */
+ uint32 l1_irq_4ke_status; /* 0x104 */
+ uint32 l1_irq_mips_mask; /* 0x108 */
+ uint32 l1_irq_mips_status; /* 0x10c */
+ uint32 l1_irq_mips1_mask; /* 0x110 */
+ uint32 reserved6[3]; /* 0x114 */
+ uint32 l2_irq_gp_mask; /* 0x120 */
+ uint32 l2_irq_gp_status; /* 0x124 */
+ uint32 l2_irq_gp_set; /* 0x128 */
+ uint32 reserved7; /* 0x12c */
+ uint32 gp_in_irq_mask; /* 0x130 */
+ uint32 gp_in_irq_status; /* 0x134 */
+ uint32 gp_in_irq_set; /* 0x138 */
+ uint32 gp_in_irq_sense; /* 0x13c */
+ uint32 gp_in; /* 0x140 */
+ uint32 gp_out; /* 0x144 */
+} PmcCtrlReg;
+
+typedef struct PmcDmaReg {
+ /* 0x00 */
+ uint32 src;
+ uint32 dest;
+ uint32 cmdList;
+ uint32 lenCtl;
+ /* 0x10 */
+ uint32 rsltSrc;
+ uint32 rsltDest;
+ uint32 rsltHcs;
+ uint32 rsltLenStat;
+} PmcDmaReg;
+
+typedef struct PmcTokenReg {
+ /* 0x00 */
+ uint32 bufSize;
+ uint32 bufBase;
+ uint32 idx2ptrIdx;
+ uint32 idx2ptrPtr;
+ /* 0x10 */
+ uint32 unused[2];
+ uint32 bufSize2;
+} PmcTokenReg;
+
+typedef struct PmcPerfPowReg {
+ uint32 freqScalarCtrl; /* 0x3c */
+ uint32 freqScalarMask; /* 0x40 */
+} PmcPerfPowReg;
+
+typedef struct PmcDQMPac {
+ uint32 dqmPac[32];
+} PmcDQMPac;
+
+typedef struct PmcDQMReg {
+ uint32 cfg; /* 0x1c00 */
+ uint32 _4keLowWtmkIrqMask; /* 0x1c04 */
+ uint32 mipsLowWtmkIrqMask; /* 0x1c08 */
+ uint32 lowWtmkIrqMask; /* 0x1c0c */
+ uint32 _4keNotEmptyIrqMask; /* 0x1c10 */
+ uint32 mipsNotEmptyIrqMask; /* 0x1c14 */
+ uint32 notEmptyIrqSts; /* 0x1c18 */
+ uint32 queueRst; /* 0x1c1c */
+ uint32 notEmptySts; /* 0x1c20 */
+ uint32 nextAvailMask; /* 0x1c24 */
+ uint32 nextAvailQueue; /* 0x1c28 */
+ uint32 mips1LowWtmkIrqMask; /* 0x1c2c */
+ uint32 mips1NotEmptyIrqMask; /* 0x1c30 */
+ uint32 autoSrcPidInsert; /* 0x1c34 */
+ uint32 timerIrqStatus; /* 0x1c38 */
+ uint32 timerStatus; /* 0x1c3c */
+ uint32 _4keTimerIrqMask; /* 0x1c40 */
+ uint32 mipsTimerIrqMask; /* 0x1c44 */
+ uint32 mips1TimerIrqMask; /* 0x1c48 */
+} PmcDQMReg;
+
+typedef struct PmcCntReg {
+ uint32 cntr[10];
+ uint32 unused[6]; /* 0x28-0x3f */
+ uint32 cntrIrqMask;
+ uint32 cntrIrqSts;
+} PmcCntReg;
+
+typedef struct PmcDqmQCtrlReg {
+ uint32 size;
+ uint32 cfga;
+ uint32 cfgb;
+ uint32 cfgc;
+} PmcDqmQCtrlReg;
+
+typedef struct PmcDqmQDataReg {
+ uint32 word[4];
+} PmcDqmQDataReg;
+
+typedef struct PmcDqmQMibReg {
+ uint32 qNumFull[32];
+ uint32 qNumEmpty[32];
+ uint32 qNumPushed[32];
+} PmcDqmQMibReg;
+
+typedef struct SSBMaster {
+ uint32 ssbmControl; /* 0x0060 */
+ uint32 ssbmWrData; /* 0x0064 */
+ uint32 ssbmRdData; /* 0x0068 */
+ uint32 ssbmStatus; /* 0x006c */
+} SSBMaster;
+
+typedef struct PmmReg {
+ uint32 memPowerCtrl; /* 0x0000 */
+ uint32 regSecurityConfig; /* 0x0004 */
+} PmmReg;
+
+typedef struct keyholeReg {
+ uint32 ctrlSts;
+ uint32 wrData;
+ uint32 mutex;
+ uint32 rdData;
+} keyholeReg;
+
+typedef struct PmbBus {
+ uint32 config; /* 0x0100 */
+ uint32 arbiter; /* 0x0104 */
+ uint32 timeout; /* 0x0108 */
+ uint32 unused1; /* 0x010c */
+ keyholeReg keyhole[4]; /* 0x0110-0x014f */
+ uint32 unused2[44]; /* 0x0150-0x01ff */
+ uint32 map[64]; /* 0x0200-0x02ff */
+}PmbBus;
+
+typedef struct CoreCtrl {
+ uint32 coreEnable; /* 0x0400 */
+ uint32 autoresetControl; /* 0x0404 */
+ uint32 coreIdle; /* 0x0408 */
+ uint32 coreResetCause; /* 0x040c */
+ uint32 memPwrDownCtrl0; /* 0x0410 */
+ uint32 memPwrDownSts0; /* 0x0414 */
+ uint32 memPwrDownCtrl1; /* 0x0418 */
+ uint32 memPwrDownSts1; /* 0x041c */
+ uint32 sysFlg0Status; /* 0x0420 */
+ uint32 sysFlg0Set; /* 0x0424 */
+ uint32 sysFlg0Clear; /* 0x0428 */
+ uint32 unused1; /* 0x042c */
+ uint32 usrFlg0Status; /* 0x0430 */
+ uint32 usrFlg0Set; /* 0x0434 */
+ uint32 usrFlg0Clear; /* 0x0438 */
+ uint32 unused2; /* 0x043c */
+ uint32 subsystemRev; /* 0x0440 */
+ uint32 resetVector; /* 0x0444 */
+} CoreCtrl;
+
+typedef struct CoreState {
+ uint32 sysMbx[8]; /* 0x0480 */
+ uint32 usrMbx[8]; /* 0x04a0 */
+ uint32 sysMtx[4]; /* 0x04c0 */
+ uint32 usrMtx[8]; /* 0x04d0 */
+} CoreState;
+
+typedef struct CoreIntr {
+ uint32 irqStatus; /* 0x0500 */
+ uint32 irqSet; /* 0x0504 */
+ uint32 irqClear; /* 0x0508 */
+ uint32 unused1; /* 0x050c */
+ uint32 srqStatus; /* 0x0510 */
+ uint32 srqSet; /* 0x0514 */
+ uint32 srqClear; /* 0x0518 */
+ uint32 unused2; /* 0x051c */
+ uint32 drqStatus; /* 0x0520 */
+ uint32 drqSet; /* 0x0524 */
+ uint32 drqClear; /* 0x0528 */
+ uint32 unused3; /* 0x052c */
+ uint32 frqStatus; /* 0x0530 */
+ uint32 frqSet; /* 0x0534 */
+ uint32 frqClear; /* 0x0538 */
+ uint32 unused4; /* 0x053c */
+ uint32 hostIrqLatched; /* 0x0540 */
+ uint32 hostIrqSet; /* 0x0544 */
+ uint32 hostIrqClear; /* 0x0548 */
+ uint32 hostIrqEnable; /* 0x054c */
+ uint32 obusFaultStatus; /* 0x0550 */
+ uint32 obusFaultClear; /* 0x0554 */
+ uint32 obusFaultAddr; /* 0x0558 */
+} CoreIntr;
+
+typedef struct CoreProfile {
+ uint32 mutex; /* 0x0580 */
+ uint32 lastConfPcLo; /* 0x0584 */
+ uint32 lastConfPcHi; /* 0x0588 */
+ uint32 lastPcLo; /* 0x058c */
+ uint32 lastPcHi; /* 0x0590 */
+ uint32 braTargetPc0Lo; /* 0x0594 */
+ uint32 braTargetPc0Hi; /* 0x0598 */
+ uint32 braTargetPc1Lo; /* 0x059c */
+ uint32 braTargetPc1Hi; /* 0x05a0 */
+ uint32 braTargetPc2Lo; /* 0x05a4 */
+ uint32 braTargetPc2Hi; /* 0x05a8 */
+ uint32 braTargetPc3Lo; /* 0x05ac */
+ uint32 braTargetPc3Hi; /* 0x05b0 */
+ uint32 unused[3]; /* 0x05b4-0x05bf */
+ uint32 profSampleW[4]; /* 0x05c0 */
+} CoreProfile;
+
+typedef struct MaestroMisc {
+ CoreCtrl coreCtrl; /* 0x0400 */
+ uint32 unused1[14]; /* 0x0448-0x047f */
+ CoreState coreState; /* 0x0480 */
+ uint32 unused2[4]; /* 0x04f0-0x04ff */
+ CoreIntr interrupt; /* 0x0500 */
+ uint32 unused3[9]; /* 0x055c-0x057f */
+ CoreProfile profile; /* 0x0580 */
+} MaestroMisc;
+
+typedef struct Pmc {
+ uint32 unused0[1030];
+ PmcCtrlReg ctrl; /* 0x1018 */
+ uint32 unused1[622]; /* 0x1148-0x1cff */
+ PmcDQMPac dqmPac; /* 0x1b00 */
+ uint32 unused5[32]; /* 0x1b80-0x1bff */
+ PmcDQMReg dqm; /* 0x1c00 */
+ uint32 unused6[749]; /* 0x1c4c-0x27ff */
+ uint32 qStatus[32]; /* 0x2800 */
+ uint32 unused7[480]; /* 0x2880-0x2fff */
+ PmcDqmQMibReg qMib; /* 0x3000 */
+ uint32 unused8[928]; /* 0x3180-0x3fff */
+ PmcDqmQCtrlReg dqmQCtrl[8]; /* 0x4000 */
+ uint32 unused9[992]; /* 0x4080-0x4fff */
+ PmcDqmQDataReg dqmQData[8]; /* 0x5000 */
+} Pmc;
+
+#define PMC ((volatile Pmc * const) PMC_BASE)
+typedef struct Procmon {
+ uint32 unused00[256];
+ MaestroMisc maestroReg; /* 0x00400 */
+ uint32 unused10[32396]; /* 0x005d0-0x1ffff */
+ PmmReg pmm; /* 0x20000 */
+ uint32 unused11[22]; /* 0x20008-0x2005f */
+ SSBMaster ssbMasterCtrl; /* 0x20060 */
+ uint32 unused12[36]; /* 0x20070-0x200ff */
+ PmbBus pmb; /* 0x20100 */
+ uint32 unused13[32576]; /* 0x20300-0x3ffff */
+ uint32 qsm[128]; /* 0x40000-0x401ff */
+ uint32 unused14[65408]; /* 0x40200-0x7ffff */
+ uint32 dtcm[1024]; /* 0x80000-0x80fff */
+} Procmon;
+#define PROCMON ((volatile Procmon * const) PROC_MON_BASE)
+
+typedef struct PMSSBMasterControl {
+ uint32 control;
+ uint32 wr_data;
+ uint32 rd_data;
+} PMSSBMasterControl;
+
+typedef struct
+{
+ uint32 control;
+#define PMC_PMBM_START (1 << 31)
+#define PMC_PMBM_TIMEOUT (1 << 30)
+#define PMC_PMBM_SLAVE_ERR (1 << 29)
+#define PMC_PMBM_BUSY (1 << 28)
+#define PMC_PMBM_BUS_SHIFT (20)
+#define PMC_PMBM_Read (0 << 24)
+#define PMC_PMBM_Write (1 << 24)
+ uint32 wr_data;
+ uint32 mutex;
+ uint32 rd_data;
+} PMB_keyhole_reg;
+
+typedef struct PMBMaster {
+ uint32 config;
+#define PMB_NUM_REGS_SHIFT (20)
+#define PMB_NUM_REGS_MASK (0x3ff)
+ uint32 arbitger;
+ uint32 timeout;
+ uint32 reserved;
+ PMB_keyhole_reg keyhole[4];
+ uint32 reserved1[44];
+ uint32 map[64];
+} PMBMaster;
+#define PMB ((volatile PMBMaster * const) PMB_BASE)
+
+typedef struct WDTimer {
+ uint32 WatchDogDefCount;/* Write 0xff00 0x00ff to Start timer
+ * Write 0xee00 0x00ee to Stop and re-load default count
+ * Read from this register returns current watch dog count
+ */
+ uint32 WatchDogCtl;
+
+ /* Number of 50-MHz ticks for WD Reset pulse to last */
+ uint32 WDResetCount;
+
+#define SOFT_RESET 0x00000001
+ uint32 WDTimerCtl;
+
+ uint32 WDAccessCtl;
+} WDTimer;
+
+#define WDTIMER0 ((volatile WDTimer * const) WDTIMR0_BASE)
+
+typedef struct BIUCFG_Access {
+ uint32_t permission; /* 0x0 */
+ uint32_t sbox; /* 0x4 */
+ uint32_t cpu_defeature; /* 0x8 */
+ uint32_t dbg_security; /* 0xc */
+ uint32_t rsvd1[32]; /* 0x10 - 0x8f */
+ uint64_t violation[2]; /* 0x90 - 0x9f */
+ uint32_t ts_access[2]; /* 0xa0 - 0xa7 */
+ uint32_t rsvd2[22]; /* 0xa8 - 0xff */
+} BIUCFG_Access;
+
+typedef struct BIUCFG_Cluster {
+ uint32_t permission; /* 0x0 */
+ uint32_t config; /* 0x4 */
+ uint32_t status; /* 0x8 */
+ uint32_t control; /* 0xc */
+ uint32_t cpucfg; /* 0x10 */
+ uint32_t dbgrom; /* 0x14 */
+ uint32_t rsvd1[2]; /* 0x18 - 0x1f */
+ uint32_t rvbar_addr[4]; /* 0x20 - 0x2f */
+ uint32_t rsvd2[52]; /* 0x30 - 0xff */
+} BIUCFG_Cluster;
+
+typedef struct BIUCFG_AuxClkCtrl {
+ uint32_t clk_control; /* 0x0 */
+ uint32_t clk_ramp; /* 0x4 */
+ uint32_t clk_pattern; /* 0x8 */
+ uint32_t rsvd; /* 0xC */
+} BIUCFG_AuxClkCtrl;
+
+typedef struct BIUCFGux {
+ uint32_t permission; /* 0 */
+ uint32_t rsvd1[3]; /* 0x04 - 0x0c */
+ BIUCFG_AuxClkCtrl cluster_clkctrl[2];/* 0x10 - 0x2c */
+ uint32_t rsvd2[52]; /* 0x30 - 0xFF */
+} BIUCFG_Aux;
+
+typedef struct BIUCFG_Bac {
+ uint32_t bac_permission; /* 0x00 */
+ uint32_t bac_periphbase; /* 0x04 */
+ uint32_t rsvd[2]; /* 0x08 - 0x0f */
+ uint32_t bac_event; /* 0x10 */
+ uint32_t rsvd_1[3]; /* 0x14 - 0x1f */
+ uint32_t bac_ccicfg; /* 0x20 */
+ uint32_t bac_cciaddr; /* 0x24 */
+ uint32_t rsvd_2[4]; /* 0x28 - 0x37 */
+ uint32_t bac_ccievs2; /* 0x38 */
+ uint32_t bac_ccievs3; /* 0x3c */
+ uint32_t bac_ccievs4; /* 0x40 */
+ uint32_t rsvd_3[3]; /* 0x44 - 0x4f */
+ uint32_t bac_ccievm0; /* 0x50 */
+ uint32_t bac_ccievm1; /* 0x54 */
+ uint32_t rsvd_4[2]; /* 0x58 - 0x5f */
+ uint32_t bac_dapapbcfg; /* 0x60 */
+ uint32_t bac_status; /* 0x64 */
+ uint32_t rsvd_5[2]; /* 0x68 - 0x6f */
+ uint32_t cpu_therm_irq_cfg;/* 0x70 */
+ uint32_t cpu_therm_threshold_cfg; /* 0x74 */
+ uint32_t rsvd_6; /* 0x78 */
+ uint32_t cpu_therm_temp; /* 0x7c */
+ uint32_t rsvd_7[32]; /* 0x80 - 0xff */
+} BIUCFG_Bac;
+
+typedef struct BIUCFG {
+ BIUCFG_Access access; /* 0x0 - 0xff */
+ BIUCFG_Cluster cluster[2]; /* 0x100 - 0x2ff */
+ BIUCFG_Bac bac; /* 0x300 - 0x3ff */
+ uint32_t rsvd1[192]; /* 0x400 - 0x6ff */
+ BIUCFG_Aux aux; /* 0x700 - 0x7ff */
+ uint32_t rsrvd2[512]; /* 0x800 - 0xfff */
+ uint32_t TSO_CNTCR; /* 0x1000 */
+ uint32_t rsvd2[2047]; /* 0x1004 - 0x2fff */
+} BIUCFG;
+
+#define BIUCFG ((volatile BIUCFG * const) BIUCFG_BASE)
+
+#endif /* __ASSEMBLER__ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+
+
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/6813_map_part.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/6813_map_part.h
new file mode 100644
index 0000000000..9f58e04fdb
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/6813_map_part.h
@@ -0,0 +1,503 @@
+/*
+<:copyright-BRCM:2019:DUAL/GPL:standard
+
+ Copyright (c) 2019 Broadcom
+ All Rights Reserved
+
+Unless you and Broadcom execute a separate written software license
+agreement governing use of this software, this software is licensed
+to you under the terms of the GNU General Public License version 2
+(the "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php,
+with the following added to such license:
+
+ As a special exception, the copyright holders of this software give
+ you permission to link this software with independent modules, and
+ to copy and distribute the resulting executable under terms of your
+ choice, provided that you also meet, for each linked independent
+ module, the terms and conditions of the license of that module.
+ An independent module is a module which is not derived from this
+ software. The special exception does not apply to any modifications
+ of the software.
+
+Not withstanding the above, under no circumstances may you combine
+this software in any way with any other Broadcom software provided
+under a license other than the GPL, without Broadcom's express prior
+written consent.
+
+:>
+*/
+
+#ifndef __BCM6813_MAP_PART_H
+#define __BCM6813_MAP_PART_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "bcmtypes.h"
+
+#define MEMC_PHYS_BASE 0x80040000 /* MC2 TOP */
+#define MEMC_SIZE 0x00040000
+
+#define PMC_PHYS_BASE 0xffa00000
+#define PMC_SIZE 0x00200000
+#define PMC_OFFSET 0x00100000
+#define PROC_MON_OFFSET 0x00100000
+#define PMB_OFFSET 0x00120100
+
+
+/* Perf block base address and size */
+#define PERF_PHYS_BASE 0xff800000
+#define PERF_SIZE 0x3500
+#define TIMR_OFFSET 0x0400 /* 64 bit timer registers */
+#define WDTIMR0_OFFSET 0x0480
+#define WDTIMR1_OFFSET 0x04c0
+
+
+#define BIUCFG_PHYS_BASE 0x81060000
+#define BIUCFG_SIZE 0x3000
+#define BIUCFG_OFFSET 0x0000
+
+#define GIC_PHYS_BASE 0x81000000
+#define GIC_SIZE 0x10000
+#define GIC_OFFSET 0x0000
+#define GICD_OFFSET 0x1000
+#define GICC_OFFSET 0x2000
+
+#define PMC_BASE (PMC_PHYS_BASE + PMC_OFFSET)
+#define PROC_MON_BASE (PMC_PHYS_BASE + PROC_MON_OFFSET)
+#define PMB_BASE (PMC_PHYS_BASE+ PMB_OFFSET)
+#define BIUCFG_BASE (BIUCFG_PHYS_BASE + BIUCFG_OFFSET)
+#define WDTIMR0_BASE (PERF_PHYS_BASE + WDTIMR0_OFFSET)
+
+#ifndef __ASSEMBLER__
+/*
+ * Power Management Control
+ */
+typedef struct PmcCtrlReg {
+ uint32 gpTmr0Ctl; /* 0x018 */
+ uint32 gpTmr0Cnt; /* 0x01c */
+ uint32 gpTmr1Ctl; /* 0x020 */
+ uint32 gpTmr1Cnt; /* 0x024 */
+ uint32 hostMboxIn; /* 0x028 */
+ uint32 hostMboxOut; /* 0x02c */
+ uint32 reserved[4]; /* 0x030 */
+ uint32 dmaCtrl; /* 0x040 */
+ uint32 dmaStatus; /* 0x044 */
+ uint32 dma0_3FifoStatus; /* 0x048 */
+ uint32 reserved1[4]; /* 0x04c */
+ uint32 diagControl; /* 0x05c */
+ uint32 diagHigh; /* 0x060 */
+ uint32 diagLow; /* 0x064 */
+ uint32 reserved8; /* 0x068 */
+ uint32 addr1WndwMask; /* 0x06c */
+ uint32 addr1WndwBaseIn; /* 0x070 */
+ uint32 addr1WndwBaseOut; /* 0x074 */
+ uint32 addr2WndwMask; /* 0x078 */
+ uint32 addr2WndwBaseIn; /* 0x07c */
+ uint32 addr2WndwBaseOut; /* 0x080 */
+ uint32 scratch; /* 0x084 */
+ uint32 reserved9; /* 0x088 */
+ uint32 softResets; /* 0x08c */
+ uint32 reserved2; /* 0x090 */
+ uint32 m4keCoreStatus; /* 0x094 */
+ uint32 reserved3; /* 0x098 */
+ uint32 ubSlaveTimeout; /* 0x09c */
+ uint32 diagEn; /* 0x0a0 */
+ uint32 devTimeout; /* 0x0a4 */
+ uint32 ubusErrorOutMask; /* 0x0a8 */
+ uint32 diagCaptStopMask; /* 0x0ac */
+ uint32 revId; /* 0x0b0 */
+ uint32 reserved4[4]; /* 0x0b4 */
+ uint32 diagCtrl; /* 0x0c4 */
+ uint32 diagStat; /* 0x0c8 */
+ uint32 diagMask; /* 0x0cc */
+ uint32 diagRslt; /* 0x0d0 */
+ uint32 diagCmp; /* 0x0d4 */
+ uint32 diagCapt; /* 0x0d8 */
+ uint32 diagCnt; /* 0x0dc */
+ uint32 diagEdgeCnt; /* 0x0e0 */
+ uint32 reserved5[4]; /* 0x0e4 */
+ uint32 smisc_bus_config; /* 0x0f4 */
+ uint32 lfsr; /* 0x0f8 */
+ uint32 dqm_pac_lock; /* 0x0fc */
+ uint32 l1_irq_4ke_mask; /* 0x100 */
+ uint32 l1_irq_4ke_status; /* 0x104 */
+ uint32 l1_irq_mips_mask; /* 0x108 */
+ uint32 l1_irq_mips_status; /* 0x10c */
+ uint32 l1_irq_mips1_mask; /* 0x110 */
+ uint32 reserved6[3]; /* 0x114 */
+ uint32 l2_irq_gp_mask; /* 0x120 */
+ uint32 l2_irq_gp_status; /* 0x124 */
+ uint32 l2_irq_gp_set; /* 0x128 */
+ uint32 reserved7; /* 0x12c */
+ uint32 gp_in_irq_mask; /* 0x130 */
+ uint32 gp_in_irq_status; /* 0x134 */
+ uint32 gp_in_irq_set; /* 0x138 */
+ uint32 gp_in_irq_sense; /* 0x13c */
+ uint32 gp_in; /* 0x140 */
+ uint32 gp_out; /* 0x144 */
+} PmcCtrlReg;
+
+typedef struct PmcDmaReg {
+ /* 0x00 */
+ uint32 src;
+ uint32 dest;
+ uint32 cmdList;
+ uint32 lenCtl;
+ /* 0x10 */
+ uint32 rsltSrc;
+ uint32 rsltDest;
+ uint32 rsltHcs;
+ uint32 rsltLenStat;
+} PmcDmaReg;
+
+typedef struct PmcTokenReg {
+ /* 0x00 */
+ uint32 bufSize;
+ uint32 bufBase;
+ uint32 idx2ptrIdx;
+ uint32 idx2ptrPtr;
+ /* 0x10 */
+ uint32 unused[2];
+ uint32 bufSize2;
+} PmcTokenReg;
+
+typedef struct PmcPerfPowReg {
+ uint32 freqScalarCtrl; /* 0x3c */
+ uint32 freqScalarMask; /* 0x40 */
+} PmcPerfPowReg;
+
+typedef struct PmcDQMPac {
+ uint32 dqmPac[32];
+} PmcDQMPac;
+
+typedef struct PmcDQMReg {
+ uint32 cfg; /* 0x1c00 */
+ uint32 _4keLowWtmkIrqMask; /* 0x1c04 */
+ uint32 mipsLowWtmkIrqMask; /* 0x1c08 */
+ uint32 lowWtmkIrqMask; /* 0x1c0c */
+ uint32 _4keNotEmptyIrqMask; /* 0x1c10 */
+ uint32 mipsNotEmptyIrqMask; /* 0x1c14 */
+ uint32 notEmptyIrqSts; /* 0x1c18 */
+ uint32 queueRst; /* 0x1c1c */
+ uint32 notEmptySts; /* 0x1c20 */
+ uint32 nextAvailMask; /* 0x1c24 */
+ uint32 nextAvailQueue; /* 0x1c28 */
+ uint32 mips1LowWtmkIrqMask; /* 0x1c2c */
+ uint32 mips1NotEmptyIrqMask; /* 0x1c30 */
+ uint32 autoSrcPidInsert; /* 0x1c34 */
+ uint32 timerIrqStatus; /* 0x1c38 */
+ uint32 timerStatus; /* 0x1c3c */
+ uint32 _4keTimerIrqMask; /* 0x1c40 */
+ uint32 mipsTimerIrqMask; /* 0x1c44 */
+ uint32 mips1TimerIrqMask; /* 0x1c48 */
+} PmcDQMReg;
+
+typedef struct PmcCntReg {
+ uint32 cntr[10];
+ uint32 unused[6]; /* 0x28-0x3f */
+ uint32 cntrIrqMask;
+ uint32 cntrIrqSts;
+} PmcCntReg;
+
+typedef struct PmcDqmQCtrlReg {
+ uint32 size;
+ uint32 cfga;
+ uint32 cfgb;
+ uint32 cfgc;
+} PmcDqmQCtrlReg;
+
+typedef struct PmcDqmQDataReg {
+ uint32 word[4];
+} PmcDqmQDataReg;
+
+typedef struct PmcDqmQMibReg {
+ uint32 qNumFull[32];
+ uint32 qNumEmpty[32];
+ uint32 qNumPushed[32];
+} PmcDqmQMibReg;
+
+typedef struct SSBMaster {
+ uint32 ssbmControl; /* 0x0060 */
+ uint32 ssbmWrData; /* 0x0064 */
+ uint32 ssbmRdData; /* 0x0068 */
+ uint32 ssbmStatus; /* 0x006c */
+} SSBMaster;
+
+typedef struct PmmReg {
+ uint32 memPowerCtrl; /* 0x0000 */
+ uint32 regSecurityConfig; /* 0x0004 */
+} PmmReg;
+
+typedef struct keyholeReg {
+ uint32 ctrlSts;
+ uint32 wrData;
+ uint32 mutex;
+ uint32 rdData;
+} keyholeReg;
+
+typedef struct PmbBus {
+ uint32 config; /* 0x0100 */
+ uint32 arbiter; /* 0x0104 */
+ uint32 timeout; /* 0x0108 */
+ uint32 unused1; /* 0x010c */
+ keyholeReg keyhole[4]; /* 0x0110-0x014f */
+ uint32 unused2[44]; /* 0x0150-0x01ff */
+ uint32 map[64]; /* 0x0200-0x02ff */
+}PmbBus;
+
+typedef struct CoreCtrl {
+ uint32 coreEnable; /* 0x0400 */
+ uint32 autoresetControl; /* 0x0404 */
+ uint32 coreIdle; /* 0x0408 */
+ uint32 coreResetCause; /* 0x040c */
+ uint32 memPwrDownCtrl0; /* 0x0410 */
+ uint32 memPwrDownSts0; /* 0x0414 */
+ uint32 memPwrDownCtrl1; /* 0x0418 */
+ uint32 memPwrDownSts1; /* 0x041c */
+ uint32 sysFlg0Status; /* 0x0420 */
+ uint32 sysFlg0Set; /* 0x0424 */
+ uint32 sysFlg0Clear; /* 0x0428 */
+ uint32 unused1; /* 0x042c */
+ uint32 usrFlg0Status; /* 0x0430 */
+ uint32 usrFlg0Set; /* 0x0434 */
+ uint32 usrFlg0Clear; /* 0x0438 */
+ uint32 unused2; /* 0x043c */
+ uint32 subsystemRev; /* 0x0440 */
+ uint32 resetVector; /* 0x0444 */
+} CoreCtrl;
+
+typedef struct CoreState {
+ uint32 sysMbx[8]; /* 0x0480 */
+ uint32 usrMbx[8]; /* 0x04a0 */
+ uint32 sysMtx[4]; /* 0x04c0 */
+ uint32 usrMtx[8]; /* 0x04d0 */
+} CoreState;
+
+typedef struct CoreIntr {
+ uint32 irqStatus; /* 0x0500 */
+ uint32 irqSet; /* 0x0504 */
+ uint32 irqClear; /* 0x0508 */
+ uint32 unused1; /* 0x050c */
+ uint32 srqStatus; /* 0x0510 */
+ uint32 srqSet; /* 0x0514 */
+ uint32 srqClear; /* 0x0518 */
+ uint32 unused2; /* 0x051c */
+ uint32 drqStatus; /* 0x0520 */
+ uint32 drqSet; /* 0x0524 */
+ uint32 drqClear; /* 0x0528 */
+ uint32 unused3; /* 0x052c */
+ uint32 frqStatus; /* 0x0530 */
+ uint32 frqSet; /* 0x0534 */
+ uint32 frqClear; /* 0x0538 */
+ uint32 unused4; /* 0x053c */
+ uint32 hostIrqLatched; /* 0x0540 */
+ uint32 hostIrqSet; /* 0x0544 */
+ uint32 hostIrqClear; /* 0x0548 */
+ uint32 hostIrqEnable; /* 0x054c */
+ uint32 obusFaultStatus; /* 0x0550 */
+ uint32 obusFaultClear; /* 0x0554 */
+ uint32 obusFaultAddr; /* 0x0558 */
+} CoreIntr;
+
+typedef struct CoreProfile {
+ uint32 mutex; /* 0x0580 */
+ uint32 lastConfPcLo; /* 0x0584 */
+ uint32 lastConfPcHi; /* 0x0588 */
+ uint32 lastPcLo; /* 0x058c */
+ uint32 lastPcHi; /* 0x0590 */
+ uint32 braTargetPc0Lo; /* 0x0594 */
+ uint32 braTargetPc0Hi; /* 0x0598 */
+ uint32 braTargetPc1Lo; /* 0x059c */
+ uint32 braTargetPc1Hi; /* 0x05a0 */
+ uint32 braTargetPc2Lo; /* 0x05a4 */
+ uint32 braTargetPc2Hi; /* 0x05a8 */
+ uint32 braTargetPc3Lo; /* 0x05ac */
+ uint32 braTargetPc3Hi; /* 0x05b0 */
+ uint32 unused[3]; /* 0x05b4-0x05bf */
+ uint32 profSampleW[4]; /* 0x05c0 */
+} CoreProfile;
+
+typedef struct MaestroMisc {
+ CoreCtrl coreCtrl; /* 0x0400 */
+ uint32 unused1[14]; /* 0x0448-0x047f */
+ CoreState coreState; /* 0x0480 */
+ uint32 unused2[4]; /* 0x04f0-0x04ff */
+ CoreIntr interrupt; /* 0x0500 */
+ uint32 unused3[9]; /* 0x055c-0x057f */
+ CoreProfile profile; /* 0x0580 */
+} MaestroMisc;
+
+typedef struct Pmc {
+ uint32 unused0[1030];
+ PmcCtrlReg ctrl; /* 0x1018 */
+ uint32 unused1[622]; /* 0x1148-0x1cff */
+ PmcDQMPac dqmPac; /* 0x1b00 */
+ uint32 unused5[32]; /* 0x1b80-0x1bff */
+ PmcDQMReg dqm; /* 0x1c00 */
+ uint32 unused6[749]; /* 0x1c4c-0x27ff */
+ uint32 qStatus[32]; /* 0x2800 */
+ uint32 unused7[480]; /* 0x2880-0x2fff */
+ PmcDqmQMibReg qMib; /* 0x3000 */
+ uint32 unused8[928]; /* 0x3180-0x3fff */
+ PmcDqmQCtrlReg dqmQCtrl[8]; /* 0x4000 */
+ uint32 unused9[992]; /* 0x4080-0x4fff */
+ PmcDqmQDataReg dqmQData[8]; /* 0x5000 */
+} Pmc;
+#define PMC ((volatile Pmc * const) PMC_BASE)
+
+typedef struct Procmon {
+ uint32 unused00[256];
+ MaestroMisc maestroReg; /* 0x00400 */
+ uint32 unused10[32396]; /* 0x005d0-0x1ffff */
+ PmmReg pmm; /* 0x20000 */
+ uint32 unused11[22]; /* 0x20008-0x2005f */
+ SSBMaster ssbMasterCtrl; /* 0x20060 */
+ uint32 unused12[36]; /* 0x20070-0x200ff */
+ PmbBus pmb; /* 0x20100 */
+ uint32 unused13[32576]; /* 0x20300-0x3ffff */
+ uint32 qsm[128]; /* 0x40000-0x401ff */
+ uint32 unused14[65408]; /* 0x40200-0x7ffff */
+ uint32 dtcm[1024]; /* 0x80000-0x80fff */
+ uint32 unused15[64512]; /* 0x81000-0xbffff */
+ uint32 itcm[4096]; /* 0xc0000-0xc3fff */
+} Procmon;
+#define PROCMON ((volatile Procmon * const) PROC_MON_BASE)
+
+typedef struct PMSSBMasterControl {
+ uint32 control;
+ uint32 wr_data;
+ uint32 rd_data;
+} PMSSBMasterControl;
+
+typedef struct
+{
+ uint32 control;
+#define PMC_PMBM_START (1 << 31)
+#define PMC_PMBM_TIMEOUT (1 << 30)
+#define PMC_PMBM_SLAVE_ERR (1 << 29)
+#define PMC_PMBM_BUSY (1 << 28)
+#define PMC_PMBM_BUS_SHIFT (20)
+#define PMC_PMBM_Read (0 << 24)
+#define PMC_PMBM_Write (1 << 24)
+ uint32 wr_data;
+ uint32 mutex;
+ uint32 rd_data;
+} PMB_keyhole_reg;
+
+typedef struct PMBMaster {
+ uint32 config;
+#define PMB_NUM_REGS_SHIFT (20)
+#define PMB_NUM_REGS_MASK (0x3ff)
+ uint32 arbitger;
+ uint32 timeout;
+ uint32 reserved;
+ PMB_keyhole_reg keyhole[4];
+ uint32 reserved1[44];
+ uint32 map[64];
+} PMBMaster;
+#define PMB ((volatile PMBMaster * const) PMB_BASE)
+
+
+typedef struct WDTimer {
+ uint32 WatchDogDefCount;
+ /* Write 0xff00 0x00ff to Start timer
+ * Write 0xee00 0x00ee to Stop and re-load default count
+ * Read from this register returns current watch dog count
+ */
+ uint32 WatchDogCtl;
+
+ /* Number of 50-MHz ticks for WD Reset pulse to last */
+ uint32 WDResetCount;
+
+ uint32 SoftRst;
+#define SOFT_RESET 0x00000001
+ uint32 WDAccessCtl;
+} WDTimer;
+
+#define WDTIMER0 ((volatile WDTimer * const) WDTIMR0_BASE)
+
+
+typedef struct BIUCFG_Access {
+ uint32 permission; /* 0x0 */
+ uint32 sbox; /* 0x4 */
+ uint32 cpu_defeature; /* 0x8 */
+ uint32 dbg_security; /* 0xc */
+ uint32 rsvd1[32]; /* 0x10 - 0x8f */
+ uint64 violation[2]; /* 0x90 - 0x9f */
+ uint32 ts_access[2]; /* 0xa0 - 0xa7 */
+ uint32 rsvd2[22]; /* 0xa8 - 0xff */
+}BIUCFG_Access;
+
+typedef struct BIUCFG_Cluster {
+ uint32 permission; /* 0x0 */
+ uint32 config; /* 0x4 */
+ uint32 status; /* 0x8 */
+ uint32 control; /* 0xc */
+ uint32 cpucfg; /* 0x10 */
+ uint32 dbgrom; /* 0x14 */
+ uint32 rsvd1[2]; /* 0x18 - 0x1f */
+ uint64 rvbar_addr[4]; /* 0x20 - 0x3f */
+ uint32 rsvd2[48]; /* 0x40 - 0xff */
+}BIUCFG_Cluster;
+
+typedef struct BIUCFG_Bac {
+ uint32 bac_permission; /* 0x00 */
+ uint32 bac_periphbase; /* 0x04 */
+ uint32 rsvd[2]; /* 0x08 - 0x0f */
+ uint32 bac_event; /* 0x10 */
+ uint32 rsvd_1[3]; /* 0x14 - 0x1f */
+ uint32 bac_ccicfg; /* 0x20 */
+ uint32 bac_cciaddr; /* 0x24 */
+ uint32 rsvd_2[4]; /* 0x28 - 0x37 */
+ uint32 bac_ccievs2; /* 0x38 */
+ uint32 bac_ccievs3; /* 0x3c */
+ uint32 bac_ccievs4; /* 0x40 */
+ uint32 rsvd_3[3]; /* 0x44 - 0x4f */
+ uint32 bac_ccievm0; /* 0x50 */
+ uint32 bac_ccievm1; /* 0x54 */
+ uint32 rsvd_4[2]; /* 0x58 - 0x5f */
+ uint32 bac_dapapbcfg; /* 0x60 */
+ uint32 bac_status; /* 0x64 */
+ uint32 rsvd_5[2]; /* 0x68 - 0x6f */
+ uint32 cpu_therm_irq_cfg; /* 0x70 */
+ uint32 cpu_therm_threshold_cfg; /* 0x74 */
+ uint32 rsvd_6; /* 0x78 */
+ uint32 cpu_therm_temp; /* 0x7c */
+ uint32 rsvd_7[32]; /* 0x80 - 0xff */
+} BIUCFG_Bac;
+
+typedef struct BIUCFG_Aux {
+ uint32 aux_permission; /* 0x00 */
+ uint32 rsvd[3]; /* 0x04 - 0x0f */
+ uint32 c0_clk_control; /* 0x10 */
+ uint32 c0_clk_ramp; /* 0x14 */
+ uint32 c0_clk_pattern; /* 0x18 */
+ uint32 rsvd_1; /* 0x1c */
+ uint32 c1_clk_control; /* 0x20 */
+ uint32 c1_clk_ramp; /* 0x24 */
+ uint32 c1_clk_pattern; /* 0x28 */
+ uint32 rsvd_2[53]; /* 0x2c - 0xff */
+} BIUCFG_Aux;
+
+typedef struct BIUCFG {
+ BIUCFG_Access access; /* 0x0 - 0xff*/
+ BIUCFG_Cluster cluster[2]; /* 0x100 - 0x2ff*/
+ BIUCFG_Bac bac; /* 0x300 - 0x3ff */
+ uint32 anonymous[192]; /* 0x400 - 0x6ff */
+ BIUCFG_Aux aux; /* 0x700 - 0x7ff */
+ uint32 anonymous_1[2560]; /* 0x800 - 0x2fff */
+}BIUCFG;
+
+#define BIUCFG ((volatile BIUCFG * const) BIUCFG_BASE)
+
+
+#endif /* __ASSEMBLER__ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/6846_map_part.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/6846_map_part.h
new file mode 100755
index 0000000000..a08e97c257
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/6846_map_part.h
@@ -0,0 +1,489 @@
+/*
+<:copyright-BRCM:2015:DUAL/GPL:standard
+
+ Copyright (c) 2015 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+
+*/
+
+#ifndef __BCM6846_MAP_PART_H
+#define __BCM6846_MAP_PART_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "bcmtypes.h"
+
+#define MEMC_PHYS_BASE 0x80180000
+#define MEMC_SIZE 0x24000
+
+#define PMC_PHYS_BASE 0xffb00000
+#define PMC_SIZE 0x6000
+#define PROC_MON_PHYS_BASE 0xffb20000
+#define PROC_MON_SIZE 0x1000
+#define PMB_OFFSET 0x0100
+
+#define PERF_PHYS_BASE 0xff800000
+#define PERF_SIZE 0x3000
+#define TIMR_OFFSET 0x0400
+#define WDTIMR0_OFFSET 0x0480
+#define WDTIMR1_OFFSET 0x04c0
+
+#define BIUCFG_PHYS_BASE 0x81060000
+#define BIUCFG_SIZE 0x3000
+#define BIUCFG_OFFSET 0x0000
+
+#define BOOTLUT_PHYS_BASE 0xffff0000
+#define BOOTLUT_SIZE 0x1000
+
+#define GIC_PHYS_BASE 0x81000000
+#define GIC_SIZE 0x10000
+#define GIC_OFFSET 0x0000
+#define GICD_OFFSET 0x1000
+#define GICC_OFFSET 0x2000
+
+#define PMC_BASE (PMC_PHYS_BASE + 0)
+#define PROC_MON_BASE (PROC_MON_PHYS_BASE + 0)
+#define PMB_BASE (PROC_MON_PHYS_BASE + PMB_OFFSET)
+
+#define WDTIMR0_BASE (PERF_PHYS_BASE + WDTIMR0_OFFSET)
+#define TIMR_BASE (PERF_PHYS_BASE + TIMR_OFFSET)
+
+#define BIUCFG_BASE (BIUCFG_PHYS_BASE + BIUCFG_OFFSET)
+
+#ifndef __ASSEMBLER__
+
+/*
+ * Power Management Control
+ */
+typedef struct PmcCtrlReg {
+ uint32 gpTmr0Ctl; /* 0x018 */
+ uint32 gpTmr0Cnt; /* 0x01c */
+ uint32 gpTmr1Ctl; /* 0x020 */
+ uint32 gpTmr1Cnt; /* 0x024 */
+ uint32 hostMboxIn; /* 0x028 */
+ uint32 hostMboxOut; /* 0x02c */
+ uint32 reserved[4]; /* 0x030 */
+ uint32 dmaCtrl; /* 0x040 */
+ uint32 dmaStatus; /* 0x044 */
+ uint32 dma0_3FifoStatus; /* 0x048 */
+ uint32 reserved1[4]; /* 0x04c */
+ uint32 diagControl; /* 0x05c */
+ uint32 diagHigh; /* 0x060 */
+ uint32 diagLow; /* 0x064 */
+ uint32 reserved8; /* 0x068 */
+ uint32 addr1WndwMask; /* 0x06c */
+ uint32 addr1WndwBaseIn; /* 0x070 */
+ uint32 addr1WndwBaseOut; /* 0x074 */
+ uint32 addr2WndwMask; /* 0x078 */
+ uint32 addr2WndwBaseIn; /* 0x07c */
+ uint32 addr2WndwBaseOut; /* 0x080 */
+ uint32 scratch; /* 0x084 */
+ uint32 reserved9; /* 0x088 */
+ uint32 softResets; /* 0x08c */
+ uint32 reserved2; /* 0x090 */
+ uint32 m4keCoreStatus; /* 0x094 */
+ uint32 reserved3; /* 0x098 */
+ uint32 ubSlaveTimeout; /* 0x09c */
+ uint32 diagEn; /* 0x0a0 */
+ uint32 devTimeout; /* 0x0a4 */
+ uint32 ubusErrorOutMask; /* 0x0a8 */
+ uint32 diagCaptStopMask; /* 0x0ac */
+ uint32 revId; /* 0x0b0 */
+ uint32 gpTmr2Ctl; /* 0x0b4 */
+ uint32 gpTmr2Cnt; /* 0x0b8 */
+ uint32 reserved4[2]; /* 0x0bc */
+ uint32 diagCtrl; /* 0x0c4 */
+ uint32 diagStat; /* 0x0c8 */
+ uint32 diagMask; /* 0x0cc */
+ uint32 diagRslt; /* 0x0d0 */
+ uint32 diagCmp; /* 0x0d4 */
+ uint32 diagCapt; /* 0x0d8 */
+ uint32 diagCnt; /* 0x0dc */
+ uint32 diagEdgeCnt; /* 0x0e0 */
+ uint32 reserved5[4]; /* 0x0e4 */
+ uint32 smisc_bus_config; /* 0x0f4 */
+ uint32 lfsr; /* 0x0f8 */
+ uint32 dqm_pac_lock; /* 0x0fc */
+ uint32 l1_irq_4ke_mask; /* 0x100 */
+ uint32 l1_irq_4ke_status; /* 0x104 */
+ uint32 l1_irq_mips_mask; /* 0x108 */
+ uint32 l1_irq_mips_status; /* 0x10c */
+ uint32 l1_irq_mips1_mask; /* 0x110 */
+ uint32 reserved6[3]; /* 0x114 */
+ uint32 l2_irq_gp_mask; /* 0x120 */
+ uint32 l2_irq_gp_status; /* 0x124 */
+ uint32 l2_irq_gp_set; /* 0x128 */
+ uint32 reserved7; /* 0x12c */
+ uint32 gp_in_irq_mask; /* 0x130 */
+ uint32 gp_in_irq_status; /* 0x134 */
+ uint32 gp_in_irq_set; /* 0x138 */
+ uint32 gp_in_irq_sense; /* 0x13c */
+ uint32 gp_in; /* 0x140 */
+ uint32 gp_out; /* 0x144 */
+} PmcCtrlReg;
+
+typedef struct PmcDmaReg {
+ /* 0x00 */
+ uint32 src;
+ uint32 dest;
+ uint32 cmdList;
+ uint32 lenCtl;
+ /* 0x10 */
+ uint32 rsltSrc;
+ uint32 rsltDest;
+ uint32 rsltHcs;
+ uint32 rsltLenStat;
+} PmcDmaReg;
+
+typedef struct PmcTokenReg {
+ /* 0x00 */
+ uint32 bufSize;
+ uint32 bufBase;
+ uint32 idx2ptrIdx;
+ uint32 idx2ptrPtr;
+ /* 0x10 */
+ uint32 unused[2];
+ uint32 bufSize2;
+} PmcTokenReg;
+
+typedef struct PmcPerfPowReg {
+ uint32 freqScalarCtrl; /* 0x3c */
+ uint32 freqScalarMask; /* 0x40 */
+} PmcPerfPowReg;
+
+typedef struct PmcDQMPac {
+ uint32 dqmPac[32];
+} PmcDQMPac;
+
+typedef struct PmcDQMReg {
+ uint32 cfg; /* 0x1c00 */
+ uint32 _4keLowWtmkIrqMask; /* 0x1c04 */
+ uint32 mipsLowWtmkIrqMask; /* 0x1c08 */
+ uint32 lowWtmkIrqMask; /* 0x1c0c */
+ uint32 _4keNotEmptyIrqMask; /* 0x1c10 */
+ uint32 mipsNotEmptyIrqMask; /* 0x1c14 */
+ uint32 notEmptyIrqSts; /* 0x1c18 */
+ uint32 queueRst; /* 0x1c1c */
+ uint32 notEmptySts; /* 0x1c20 */
+ uint32 nextAvailMask; /* 0x1c24 */
+ uint32 nextAvailQueue; /* 0x1c28 */
+ uint32 mips1LowWtmkIrqMask; /* 0x1c2c */
+ uint32 mips1NotEmptyIrqMask; /* 0x1c30 */
+ uint32 autoSrcPidInsert; /* 0x1c34 */
+ uint32 timerIrqStatus; /* 0x1c38 */
+ uint32 timerStatus; /* 0x1c3c */
+ uint32 _4keTimerIrqMask; /* 0x1c40 */
+ uint32 mipsTimerIrqMask; /* 0x1c44 */
+ uint32 mips1TimerIrqMask; /* 0x1c48 */
+} PmcDQMReg;
+
+typedef struct PmcCntReg {
+ uint32 cntr[10];
+ uint32 unused[6]; /* 0x28-0x3f */
+ uint32 cntrIrqMask;
+ uint32 cntrIrqSts;
+} PmcCntReg;
+
+typedef struct PmcDqmQCtrlReg {
+ uint32 size;
+ uint32 cfga;
+ uint32 cfgb;
+ uint32 cfgc;
+} PmcDqmQCtrlReg;
+
+typedef struct PmcDqmQDataReg {
+ uint32 word[4];
+} PmcDqmQDataReg;
+
+typedef struct PmcDqmQMibReg {
+ uint32 qNumFull[32];
+ uint32 qNumEmpty[32];
+ uint32 qNumPushed[32];
+} PmcDqmQMibReg;
+
+typedef struct SSBMaster {
+ uint32 ssbmControl; /* 0x0060 */
+ uint32 ssbmWrData; /* 0x0064 */
+ uint32 ssbmRdData; /* 0x0068 */
+ uint32 ssbmStatus; /* 0x006c */
+} SSBMaster;
+
+typedef struct PmmReg {
+ uint32 memPowerCtrl; /* 0x0000 */
+ uint32 regSecurityConfig; /* 0x0004 */
+} PmmReg;
+
+typedef struct keyholeReg {
+ uint32 ctrlSts;
+ uint32 wrData;
+ uint32 mutex;
+ uint32 rdData;
+} keyholeReg;
+
+typedef struct PmbBus {
+ uint32 config; /* 0x0100 */
+ uint32 arbiter; /* 0x0104 */
+ uint32 timeout; /* 0x0108 */
+ uint32 unused1; /* 0x010c */
+ keyholeReg keyhole[4]; /* 0x0110-0x014f */
+ uint32 unused2[44]; /* 0x0150-0x01ff */
+ uint32 map[64]; /* 0x0200-0x02ff */
+}PmbBus;
+
+typedef struct CoreCtrl {
+ uint32 coreEnable; /* 0x0400 */
+ uint32 autoresetControl; /* 0x0404 */
+ uint32 coreIdle; /* 0x0408 */
+ uint32 coreResetCause; /* 0x040c */
+ uint32 memPwrDownCtrl0; /* 0x0410 */
+ uint32 memPwrDownSts0; /* 0x0414 */
+ uint32 memPwrDownCtrl1; /* 0x0418 */
+ uint32 memPwrDownSts1; /* 0x041c */
+ uint32 sysFlg0Status; /* 0x0420 */
+ uint32 sysFlg0Set; /* 0x0424 */
+ uint32 sysFlg0Clear; /* 0x0428 */
+ uint32 unused1; /* 0x042c */
+ uint32 usrFlg0Status; /* 0x0430 */
+ uint32 usrFlg0Set; /* 0x0434 */
+ uint32 usrFlg0Clear; /* 0x0438 */
+ uint32 unused2; /* 0x043c */
+ uint32 subsystemRev; /* 0x0440 */
+ uint32 resetVector; /* 0x0444 */
+} CoreCtrl;
+
+typedef struct CoreState {
+ uint32 sysMbx[8]; /* 0x0480 */
+ uint32 usrMbx[8]; /* 0x04a0 */
+ uint32 sysMtx[4]; /* 0x04c0 */
+ uint32 usrMtx[8]; /* 0x04d0 */
+} CoreState;
+
+typedef struct CoreIntr {
+ uint32 irqStatus; /* 0x0500 */
+ uint32 irqSet; /* 0x0504 */
+ uint32 irqClear; /* 0x0508 */
+ uint32 unused1; /* 0x050c */
+ uint32 srqStatus; /* 0x0510 */
+ uint32 srqSet; /* 0x0514 */
+ uint32 srqClear; /* 0x0518 */
+ uint32 unused2; /* 0x051c */
+ uint32 drqStatus; /* 0x0520 */
+ uint32 drqSet; /* 0x0524 */
+ uint32 drqClear; /* 0x0528 */
+ uint32 unused3; /* 0x052c */
+ uint32 frqStatus; /* 0x0530 */
+ uint32 frqSet; /* 0x0534 */
+ uint32 frqClear; /* 0x0538 */
+ uint32 unused4; /* 0x053c */
+ uint32 hostIrqLatched; /* 0x0540 */
+ uint32 hostIrqSet; /* 0x0544 */
+ uint32 hostIrqClear; /* 0x0548 */
+ uint32 hostIrqEnable; /* 0x054c */
+ uint32 obusFaultStatus; /* 0x0550 */
+ uint32 obusFaultClear; /* 0x0554 */
+ uint32 obusFaultAddr; /* 0x0558 */
+} CoreIntr;
+
+typedef struct CoreProfile {
+ uint32 mutex; /* 0x0580 */
+ uint32 lastConfPcLo; /* 0x0584 */
+ uint32 lastConfPcHi; /* 0x0588 */
+ uint32 lastPcLo; /* 0x058c */
+ uint32 lastPcHi; /* 0x0590 */
+ uint32 braTargetPc0Lo; /* 0x0594 */
+ uint32 braTargetPc0Hi; /* 0x0598 */
+ uint32 braTargetPc1Lo; /* 0x059c */
+ uint32 braTargetPc1Hi; /* 0x05a0 */
+ uint32 braTargetPc2Lo; /* 0x05a4 */
+ uint32 braTargetPc2Hi; /* 0x05a8 */
+ uint32 braTargetPc3Lo; /* 0x05ac */
+ uint32 braTargetPc3Hi; /* 0x05b0 */
+ uint32 unused[3]; /* 0x05b4-0x05bf */
+ uint32 profSampleW[4]; /* 0x05c0 */
+} CoreProfile;
+
+typedef struct MaestroMisc {
+ CoreCtrl coreCtrl; /* 0x0400 */
+ uint32 unused1[14]; /* 0x0448-0x047f */
+ CoreState coreState; /* 0x0480 */
+ uint32 unused2[4]; /* 0x04f0-0x04ff */
+ CoreIntr interrupt; /* 0x0500 */
+ uint32 unused3[9]; /* 0x055c-0x057f */
+ CoreProfile profile; /* 0x0580 */
+} MaestroMisc;
+
+typedef struct Pmc {
+ uint32 baseReserved; /* 0x0000 */
+ uint32 unused0[1029];
+ PmcCtrlReg ctrl; /* 0x1018 */
+ uint32 unused1[174]; /* 0x1148-0x13ff */
+ PmcTokenReg token; /* 0x1400 */
+ uint32 unused2[136]; /* 0x141c-0x163b */
+ PmcPerfPowReg perfPower; /* 0x163c */
+ uint32 unused3[175]; /* 0x1644-0x18ff */
+ PmcCntReg hwCounter; /* 0x1900 */
+ uint32 unused4[110]; /* 0x1948-0x1aff */
+ PmcDQMPac dqmPac; /* 0x1b00 */
+ uint32 unused5[32]; /* 0x1b80-0x1bff */
+ PmcDQMReg dqm; /* 0x1c00 */
+ uint32 unused6[749]; /* 0x1c4c-0x27ff */
+ uint32 qStatus[32]; /* 0x2800 */
+ uint32 unused7[480]; /* 0x2880-0x2fff */
+ PmcDqmQMibReg qMib; /* 0x3000 */
+ uint32 unused8[928]; /* 0x3180-0x3fff */
+ PmcDqmQCtrlReg dqmQCtrl[8]; /* 0x4000 */
+ uint32 unused9[992]; /* 0x4080-0x4fff */
+ PmcDqmQDataReg dqmQData[8]; /* 0x5000 */
+} Pmc;
+#define PMC ((volatile Pmc * const) PMC_BASE)
+
+typedef struct Procmon {
+ PmmReg pmm; /* 0x20000 */
+ uint32 unused11[22]; /* 0x20008-0x2005f */
+ SSBMaster ssbMasterCtrl; /* 0x20060 */
+ uint32 unused12[36]; /* 0x20070-0x200ff */
+ PmbBus pmb; /* 0x20100 */
+ uint32 unused13[64]; /* 0x20300-0x203ff */
+ MaestroMisc maestroReg; /* 0x20400 */
+} Procmon;
+#define PROCMON ((volatile Procmon * const) PROC_MON_BASE)
+
+typedef struct PMSSBMasterControl {
+ uint32 control;
+ uint32 wr_data;
+ uint32 rd_data;
+} PMSSBMasterControl;
+
+typedef struct
+{
+ uint32 control;
+#define PMC_PMBM_START (1 << 31)
+#define PMC_PMBM_TIMEOUT (1 << 30)
+#define PMC_PMBM_SLAVE_ERR (1 << 29)
+#define PMC_PMBM_BUSY (1 << 28)
+#define PMC_PMBM_BUS_SHIFT (20)
+#define PMC_PMBM_Read (0 << 24)
+#define PMC_PMBM_Write (1 << 24)
+ uint32 wr_data;
+ uint32 mutex;
+ uint32 rd_data;
+} PMB_keyhole_reg;
+
+typedef struct PMBMaster {
+ uint32 config;
+#define PMB_NUM_REGS_SHIFT (20)
+#define PMB_NUM_REGS_MASK (0x3ff)
+ uint32 arbitger;
+ uint32 timeout;
+ uint32 reserved;
+ PMB_keyhole_reg keyhole[4];
+ uint32 reserved1[44];
+ uint32 map[64];
+} PMBMaster;
+#define PMB ((volatile PMBMaster * const) PMB_BASE)
+
+/*
+** Timer
+*/
+#define TIMER_64BIT
+typedef struct Timer {
+ uint64 TimerCtl0;
+ uint64 TimerCtl1;
+ uint64 TimerCtl2;
+ uint64 TimerCtl3;
+#define TIMERENABLE (1ULL << 63)
+#define RSTCNTCLR (1ULL << 62)
+ uint64 TimerCnt0;
+ uint64 TimerCnt1;
+ uint64 TimerCnt2;
+ uint64 TimerCnt3;
+#define TIMER_COUNT_MASK 0x3FFFFFFFFFFFFFFFULL
+ uint32 TimerMask;
+#define TIMER0EN 0x01
+#define TIMER1EN 0x02
+#define TIMER2EN 0x04
+#define TIMER3EN 0x08
+ uint32 TimerInts;
+#define TIMER0 0x01
+#define TIMER1 0x02
+#define TIMER2 0x04
+#define TIMER3 0x08
+ uint32 ResetReason;
+#define SW_INI_RESET 0x00000001
+ uint32 spare[3];
+} Timer;
+
+typedef struct WDTimer {
+ uint32 WatchDogDefCount;/* Write 0xff00 0x00ff to Start timer
+ * Write 0xee00 0x00ee to Stop and re-load default count
+ * * * Read from this register returns current watch dog count
+ * * */
+ uint32 WatchDogCtl;
+
+ /* Number of 50-MHz ticks for WD Reset pulse to last */
+ uint32 WDResetCount;
+
+ uint32 SoftRst;
+#define SOFT_RESET 0x00000001
+ uint32 WDAccessCtl;
+} WDTimer;
+
+#define TIMER ((volatile Timer * const) TIMR_BASE)
+#define WDTIMER0 ((volatile WDTimer * const) WDTIMR0_BASE)
+
+typedef struct BIUCFG_Access {
+ uint32 permission; /* 0x0 */
+ uint32 sbox; /* 0x4 */
+ uint32 cpu_defeature; /* 0x8 */
+ uint32 dbg_security; /* 0xc */
+ uint32 rsvd1[32]; /* 0x10 - 0x8f */
+ uint64 violation[2]; /* 0x90 - 0x9f */
+ uint32 ts_access[2]; /* 0xa0 - 0xa7 */
+ uint32 rsvd2[22]; /* 0xa8 - 0xff */
+}BIUCFG_Access;
+
+
+typedef struct BIUCFG_Cluster {
+ uint32 permission; /* 0x0 */
+ uint32 config; /* 0x4 */
+ uint32 status; /* 0x8 */
+ uint32 control; /* 0xc */
+ uint32 cpucfg; /* 0x10 */
+ uint32 dbgrom; /* 0x14 */
+ uint32 rsvd1[2]; /* 0x18 - 0x1f */
+ uint64 rvbar_addr[4]; /* 0x20 - 0x3f */
+ uint32 rsvd2[48]; /* 0x40 - 0xff */
+}BIUCFG_Cluster;
+
+typedef struct BIUCFG {
+ BIUCFG_Access access; /* 0x0 - 0xff*/
+ BIUCFG_Cluster cluster[2]; /* 0x100 - 0x2ff*/
+ uint32 anonymous[2880]; /* 0x300 - 0x2fff*/
+}BIUCFG;
+#define BIUCFG ((volatile BIUCFG * const) BIUCFG_BASE)
+
+#endif /* __ASSEMBLER__ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/6855_map_part.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/6855_map_part.h
new file mode 100755
index 0000000000..9d5d1f0c0f
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/6855_map_part.h
@@ -0,0 +1,307 @@
+/*
+<:copyright-BRCM:2015:DUAL/GPL:standard
+
+ Copyright (c) 2015 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+
+*/
+
+#ifndef __BCM6855_MAP_PART_H
+#define __BCM6855_MAP_PART_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "bcmtypes.h"
+
+#define MEMC_PHYS_BASE 0x80180000
+#define MEMC_SIZE 0x24000
+
+#define PMC_PHYS_BASE 0xffb20000
+#define PMC_SIZE 0x1000
+#define PMB_OFFSET 0x100
+
+#define PERF_PHYS_BASE 0xff800000
+#define PERF_SIZE 0x14000
+#define TIMR_OFFSET 0x0400
+#define WDTIMR0_OFFSET 0x0480
+#define WDTIMR1_OFFSET 0x04c0
+
+#define BIUCFG_PHYS_BASE 0x81060000
+#define BIUCFG_SIZE 0x3000
+#define BIUCFG_OFFSET 0x0000
+
+#define BOOTLUT_PHYS_BASE 0xffff0000
+#define BOOTLUT_SIZE 0x1000
+
+
+#define GIC_PHYS_BASE 0x81000000
+#define GIC_SIZE 0x10000
+#define GIC_OFFSET 0x0000
+#define GICD_OFFSET 0x1000
+#define GICC_OFFSET 0x2000
+
+
+#define PMC_BASE (PMC_PHYS_BASE + 0)
+#define PMB_BASE (PMC_PHYS_BASE + PMB_OFFSET)
+
+#define WDTIMR0_BASE (PERF_PHYS_BASE + WDTIMR0_OFFSET)
+#define TIMR_BASE (PERF_PHYS_BASE + TIMR_OFFSET)
+#define BIUCFG_BASE (BIUCFG_PHYS_BASE + BIUCFG_OFFSET)
+
+#ifndef __ASSEMBLER__
+
+/*
+ * Power Management Control
+ */
+
+typedef union
+{
+ struct
+ {
+ uint32 propagate_to_err : 1; // [00:00] -+
+ uint32 propagate_slv_err : 1; // [01:01] | - these are potentially dangerous and MAY cause a system crash
+ uint32 pmbus_reset_n : 1; // [02:02] -+
+ uint32 reserved0 : 1; // [03:03]
+ uint32 maxPmbIdx : 3; // [06:04] 0-based (0-7)
+ uint32 reserved1 : 1; // [07:07]
+ uint32 maxClientId : 12; // [19:08] 0-based (theoreticaly 0-4095, but code limits this to 256 devices - 0-255)
+ uint32 numRegsPerClient : 10; // [29:20] some power of 2 - number of 32-bit registers in each client (max = 512)
+ uint32 startDiscovery : 1; // [30:30] kicks off H/W discovery of clients and fills in the map (see PMB_REGS below)
+ uint32 discoveryBusy : 1; // [31:31] whether or not H/W discovery is still busy creating the map
+ } Bits;
+ uint32 Reg32;
+} PMB_CONFIG_REG;
+
+typedef union
+{
+ struct {
+ uint32 data : 16; // [15:00]
+ uint32 reserved1 : 16; // [31:16]
+ } Bits;
+ uint32 Reg32;
+} SSBM_data_reg;
+
+typedef union
+{
+ struct {
+ uint32 ssb_addr : 10; // [09:00]
+ uint32 ssb_cmd : 2; // [11:10]
+ uint32 ssb_en : 1; // [12:12]
+ uint32 ssb_add_pre : 1; // [13:13]
+ uint32 reserved2 : 1; // [14:14]
+ uint32 ssb_start : 1; // [15:15]
+ uint32 reserved1 : 16; // [31:16]
+ } Bits;
+ uint32 Reg32;
+} SSBM_control_reg;
+
+typedef union
+{
+ struct {
+ uint32 busy : 1; // [00:00]
+ uint32 reserved1 : 31; // [31:01]
+ } Bits;
+ uint32 Reg32;
+} SSBM_status_reg;
+
+typedef union
+{
+ struct {
+ uint32 swreg_th_lo : 8; // [07:00]
+ uint32 swreg_th_hi : 8; // [15:08]
+ uint32 reserved :16; // [31:16]
+ } Bits;
+ uint32 Reg32;
+} SSBM_SWREG_th_hilo_reg;
+
+
+typedef union
+{
+ struct {
+ uint32 ssb_lock_addr : 10; // [09:00]
+ uint32 lock_bit : 1; // [10:10]
+ uint32 lock_mode : 1; // [11:11]
+ uint32 reserved : 20; // [31:12]
+ } Bits;
+ uint32 Reg32;
+} SSBM_SWREG_lock_reg;
+
+#define kSSBWrite 0x01
+#define kSSBRead 0x02
+#define kSSBEn (1 << 12)
+#define kSSBStart (1 << 15)
+
+typedef struct SSBMaster {
+ SSBM_control_reg ssbmControl; /* 0x0060 */
+ SSBM_data_reg ssbmWrData; /* 0x0064 */
+ SSBM_data_reg ssbmRdData; /* 0x0068 */
+ SSBM_status_reg ssbmStatus; /* 0x006c */
+ SSBM_SWREG_th_hilo_reg ssbmThHiLo; /* 0x0070 */
+ SSBM_SWREG_lock_reg ssbmSwLock; /* 0x0074 */
+} SSBMaster;
+
+typedef struct PmmReg {
+ uint32 memPowerCtrl; /* 0x0000 */
+ uint32 regSecurityConfig; /* 0x0004 */
+} PmmReg;
+
+typedef struct keyholeReg {
+ uint32 ctrlSts;
+ uint32 wrData;
+ uint32 mutex;
+ uint32 rdData;
+} keyholeReg;
+
+typedef struct PmbBus {
+ PMB_CONFIG_REG config; /* 0x0100 */
+ uint32 arbiter; /* 0x0104 */
+ uint32 timeout; /* 0x0108 */
+ uint32 unused1; /* 0x010c */
+ keyholeReg keyhole[4]; /* 0x0110-0x014f */
+ uint32 unused2[44]; /* 0x0150-0x01ff */
+ uint32 map[64]; /* 0x0200-0x02ff */
+}PmbBus;
+
+typedef struct Pmc {
+ PmmReg pmm; /* 0x20000 */
+ uint32 unused11[22]; /* 0x20008-0x2005f */
+ SSBMaster ssbMasterCtrl; /* 0x20060-0x20077 */
+ uint32 unused12[34]; /* 0x20078-0x200ff */
+ PmbBus pmb; /* 0x20100 */
+} Pmc;
+#define PMC ((volatile Pmc * const) PMC_BASE)
+
+typedef struct
+{
+ uint32 control;
+#define PMC_PMBM_START (1 << 31)
+#define PMC_PMBM_TIMEOUT (1 << 30)
+#define PMC_PMBM_SLAVE_ERR (1 << 29)
+#define PMC_PMBM_BUSY (1 << 28)
+#define PMC_PMBM_BUS_SHIFT (20)
+#define PMC_PMBM_Read (0 << 24)
+#define PMC_PMBM_Write (1 << 24)
+ uint32 wr_data;
+ uint32 mutex;
+ uint32 rd_data;
+} PMB_keyhole_reg;
+
+typedef struct PMBMaster {
+ uint32 config;
+#define PMB_NUM_REGS_SHIFT (20)
+#define PMB_NUM_REGS_MASK (0x3ff)
+ uint32 arbitger;
+ uint32 timeout;
+ uint32 reserved;
+ PMB_keyhole_reg keyhole[4];
+ uint32 reserved1[44];
+ uint32 map[64];
+} PMBMaster;
+#define PMB ((volatile PMBMaster * const) PMB_BASE)
+
+/*
+** Timer
+*/
+#define TIMER_64BIT
+typedef struct Timer {
+ uint64 TimerCtl0;
+ uint64 TimerCtl1;
+ uint64 TimerCtl2;
+ uint64 TimerCtl3;
+#define TIMERENABLE (1ULL << 63)
+#define RSTCNTCLR (1ULL << 62)
+ uint64 TimerCnt0;
+ uint64 TimerCnt1;
+ uint64 TimerCnt2;
+ uint64 TimerCnt3;
+#define TIMER_COUNT_MASK 0x3FFFFFFFFFFFFFFFULL
+ uint32 TimerMask;
+#define TIMER0EN 0x01
+#define TIMER1EN 0x02
+#define TIMER2EN 0x04
+#define TIMER3EN 0x08
+ uint32 TimerInts;
+#define TIMER0 0x01
+#define TIMER1 0x02
+#define TIMER2 0x04
+#define TIMER3 0x08
+ uint32 ResetReason;
+#define SW_INI_RESET 0x00000001
+ uint32 spare[3];
+} Timer;
+
+typedef struct WDTimer {
+ uint32 WatchDogDefCount;/* Write 0xff00 0x00ff to Start timer
+ * Write 0xee00 0x00ee to Stop and re-load default count
+ * * * Read from this register returns current watch dog count
+ * * */
+ uint32 WatchDogCtl;
+
+ /* Number of 50-MHz ticks for WD Reset pulse to last */
+ uint32 WDResetCount;
+
+ uint32 WDTimerCtl;
+#define SOFT_RESET 0x00000001
+ uint32 WDAccessCtl;
+} WDTimer;
+
+#define TIMER ((volatile Timer * const) TIMR_BASE)
+#define WDTIMER0 ((volatile WDTimer * const) WDTIMR0_BASE)
+
+typedef struct BIUCFG_Access {
+ uint32 permission; /* 0x0 */
+ uint32 revd0; /* 0x4 */
+ uint32 cpu_defeature; /* 0x8 */
+ uint32 dbg_security; /* 0xc */
+ uint32 rsvd1[36]; /* 0x10 - 0x9f */
+ uint32 ts_access; /* 0xa0 - 0xa3 */
+ uint32 rsvd2[23]; /* 0xa4 - 0xff */
+}BIUCFG_Access;
+
+
+typedef struct BIUCFG_Cluster {
+ uint32 permission; /* 0x0 */
+ uint32 config; /* 0x4 */
+ uint32 status; /* 0x8 */
+ uint32 control; /* 0xc */
+ uint32 cpucfg; /* 0x10 */
+ uint32 dbgrom; /* 0x14 */
+ uint32 rsvd1[2]; /* 0x18 - 0x1f */
+ uint64 rvbar_addr[4]; /* 0x20 - 0x3f */
+ uint32 rsvd2[48]; /* 0x40 - 0xff */
+}BIUCFG_Cluster;
+
+typedef struct BIUCFG {
+ BIUCFG_Access access; /* 0x0 - 0xff*/
+ BIUCFG_Cluster cluster[2]; /* 0x100 - 0x2ff*/
+ uint32 anonymous[2880]; /* 0x300 - 0x2fff*/
+}BIUCFG;
+#define BIUCFG ((volatile BIUCFG * const) BIUCFG_BASE)
+
+
+#endif /* __ASSEMBLER__ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/6856_map_part.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/6856_map_part.h
new file mode 100755
index 0000000000..6c74f3cfe7
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/6856_map_part.h
@@ -0,0 +1,517 @@
+/*
+<:copyright-BRCM:2015:DUAL/GPL:standard
+
+ Copyright (c) 2015 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+
+*/
+
+#ifndef __BCM6856_MAP_PART_H
+#define __BCM6856_MAP_PART_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "bcmtypes.h"
+
+#define MEMC_PHYS_BASE 0x80180000
+#define MEMC_SIZE 0x24000
+
+#define PMC_PHYS_BASE 0xffb00000
+#define PMC_SIZE 0x6000
+#define PROC_MON_PHYS_BASE 0xffb20000
+#define PROC_MON_SIZE 0x1000
+#define PMB_OFFSET 0x0100
+
+#define PERF_PHYS_BASE 0xff800000
+#define PERF_SIZE 0x3000
+#define TIMR_OFFSET 0x0400
+#define WDTIMR0_OFFSET 0x0480
+#define WDTIMR1_OFFSET 0x04c0
+
+#define BIUCFG_PHYS_BASE 0x81060000
+#define BIUCFG_SIZE 0x3000
+#define BIUCFG_OFFSET 0x0000
+
+#define GIC_PHYS_BASE 0x81000000
+#define GIC_SIZE 0x10000
+#define GIC_OFFSET 0x0000
+#define GICD_OFFSET 0x1000
+#define GICC_OFFSET 0x2000
+
+
+#define PMC_BASE (PMC_PHYS_BASE + 0)
+#define PROC_MON_BASE (PROC_MON_PHYS_BASE + 0)
+#define PMB_BASE (PROC_MON_PHYS_BASE + PMB_OFFSET)
+
+#define WDTIMR0_BASE (PERF_PHYS_BASE + WDTIMR0_OFFSET)
+#define TIMR_BASE (PERF_PHYS_BASE + TIMR_OFFSET)
+#define BIUCFG_BASE (BIUCFG_PHYS_BASE + BIUCFG_OFFSET)
+
+#ifndef __ASSEMBLER__
+/*
+ * Power Management Control
+ */
+typedef struct PmcCtrlReg {
+ uint32 gpTmr0Ctl; /* 0x018 */
+ uint32 gpTmr0Cnt; /* 0x01c */
+ uint32 gpTmr1Ctl; /* 0x020 */
+ uint32 gpTmr1Cnt; /* 0x024 */
+ uint32 hostMboxIn; /* 0x028 */
+ uint32 hostMboxOut; /* 0x02c */
+ uint32 reserved[4]; /* 0x030 */
+ uint32 dmaCtrl; /* 0x040 */
+ uint32 dmaStatus; /* 0x044 */
+ uint32 dma0_3FifoStatus; /* 0x048 */
+ uint32 reserved1[4]; /* 0x04c */
+ uint32 diagControl; /* 0x05c */
+ uint32 diagHigh; /* 0x060 */
+ uint32 diagLow; /* 0x064 */
+ uint32 reserved8; /* 0x068 */
+ uint32 addr1WndwMask; /* 0x06c */
+ uint32 addr1WndwBaseIn; /* 0x070 */
+ uint32 addr1WndwBaseOut; /* 0x074 */
+ uint32 addr2WndwMask; /* 0x078 */
+ uint32 addr2WndwBaseIn; /* 0x07c */
+ uint32 addr2WndwBaseOut; /* 0x080 */
+ uint32 scratch; /* 0x084 */
+ uint32 reserved9; /* 0x088 */
+ uint32 softResets; /* 0x08c */
+ uint32 reserved2; /* 0x090 */
+ uint32 m4keCoreStatus; /* 0x094 */
+ uint32 reserved3; /* 0x098 */
+ uint32 ubSlaveTimeout; /* 0x09c */
+ uint32 diagEn; /* 0x0a0 */
+ uint32 devTimeout; /* 0x0a4 */
+ uint32 ubusErrorOutMask; /* 0x0a8 */
+ uint32 diagCaptStopMask; /* 0x0ac */
+ uint32 revId; /* 0x0b0 */
+ uint32 gpTmr2Ctl; /* 0x0b4 */
+ uint32 gpTmr2Cnt; /* 0x0b8 */
+ uint32 reserved4[2]; /* 0x0bc */
+ uint32 diagCtrl; /* 0x0c4 */
+ uint32 diagStat; /* 0x0c8 */
+ uint32 diagMask; /* 0x0cc */
+ uint32 diagRslt; /* 0x0d0 */
+ uint32 diagCmp; /* 0x0d4 */
+ uint32 diagCapt; /* 0x0d8 */
+ uint32 diagCnt; /* 0x0dc */
+ uint32 diagEdgeCnt; /* 0x0e0 */
+ uint32 reserved5[4]; /* 0x0e4 */
+ uint32 smisc_bus_config; /* 0x0f4 */
+ uint32 lfsr; /* 0x0f8 */
+ uint32 dqm_pac_lock; /* 0x0fc */
+ uint32 l1_irq_4ke_mask; /* 0x100 */
+ uint32 l1_irq_4ke_status; /* 0x104 */
+ uint32 l1_irq_mips_mask; /* 0x108 */
+ uint32 l1_irq_mips_status; /* 0x10c */
+ uint32 l1_irq_mips1_mask; /* 0x110 */
+ uint32 reserved6[3]; /* 0x114 */
+ uint32 l2_irq_gp_mask; /* 0x120 */
+ uint32 l2_irq_gp_status; /* 0x124 */
+ uint32 l2_irq_gp_set; /* 0x128 */
+ uint32 reserved7; /* 0x12c */
+ uint32 gp_in_irq_mask; /* 0x130 */
+ uint32 gp_in_irq_status; /* 0x134 */
+ uint32 gp_in_irq_set; /* 0x138 */
+ uint32 gp_in_irq_sense; /* 0x13c */
+ uint32 gp_in; /* 0x140 */
+ uint32 gp_out; /* 0x144 */
+} PmcCtrlReg;
+
+typedef struct PmcDmaReg {
+ /* 0x00 */
+ uint32 src;
+ uint32 dest;
+ uint32 cmdList;
+ uint32 lenCtl;
+ /* 0x10 */
+ uint32 rsltSrc;
+ uint32 rsltDest;
+ uint32 rsltHcs;
+ uint32 rsltLenStat;
+} PmcDmaReg;
+
+typedef struct PmcTokenReg {
+ /* 0x00 */
+ uint32 bufSize;
+ uint32 bufBase;
+ uint32 idx2ptrIdx;
+ uint32 idx2ptrPtr;
+ /* 0x10 */
+ uint32 unused[2];
+ uint32 bufSize2;
+} PmcTokenReg;
+
+typedef struct PmcPerfPowReg {
+ uint32 freqScalarCtrl; /* 0x3c */
+ uint32 freqScalarMask; /* 0x40 */
+} PmcPerfPowReg;
+
+typedef struct PmcDQMPac {
+ uint32 dqmPac[32];
+} PmcDQMPac;
+
+typedef struct PmcDQMReg {
+ uint32 cfg; /* 0x1c00 */
+ uint32 _4keLowWtmkIrqMask; /* 0x1c04 */
+ uint32 mipsLowWtmkIrqMask; /* 0x1c08 */
+ uint32 lowWtmkIrqMask; /* 0x1c0c */
+ uint32 _4keNotEmptyIrqMask; /* 0x1c10 */
+ uint32 mipsNotEmptyIrqMask; /* 0x1c14 */
+ uint32 notEmptyIrqSts; /* 0x1c18 */
+ uint32 queueRst; /* 0x1c1c */
+ uint32 notEmptySts; /* 0x1c20 */
+ uint32 nextAvailMask; /* 0x1c24 */
+ uint32 nextAvailQueue; /* 0x1c28 */
+ uint32 mips1LowWtmkIrqMask; /* 0x1c2c */
+ uint32 mips1NotEmptyIrqMask; /* 0x1c30 */
+ uint32 autoSrcPidInsert; /* 0x1c34 */
+ uint32 timerIrqStatus; /* 0x1c38 */
+ uint32 timerStatus; /* 0x1c3c */
+ uint32 _4keTimerIrqMask; /* 0x1c40 */
+ uint32 mipsTimerIrqMask; /* 0x1c44 */
+ uint32 mips1TimerIrqMask; /* 0x1c48 */
+} PmcDQMReg;
+
+typedef struct PmcCntReg {
+ uint32 cntr[10];
+ uint32 unused[6]; /* 0x28-0x3f */
+ uint32 cntrIrqMask;
+ uint32 cntrIrqSts;
+} PmcCntReg;
+
+typedef struct PmcDqmQCtrlReg {
+ uint32 size;
+ uint32 cfga;
+ uint32 cfgb;
+ uint32 cfgc;
+} PmcDqmQCtrlReg;
+
+typedef struct PmcDqmQDataReg {
+ uint32 word[4];
+} PmcDqmQDataReg;
+
+typedef struct PmcDqmQMibReg {
+ uint32 qNumFull[32];
+ uint32 qNumEmpty[32];
+ uint32 qNumPushed[32];
+} PmcDqmQMibReg;
+
+typedef struct SSBMaster {
+ uint32 ssbmControl; /* 0x0060 */
+ uint32 ssbmWrData; /* 0x0064 */
+ uint32 ssbmRdData; /* 0x0068 */
+ uint32 ssbmStatus; /* 0x006c */
+} SSBMaster;
+
+typedef struct PmmReg {
+ uint32 memPowerCtrl; /* 0x0000 */
+ uint32 regSecurityConfig; /* 0x0004 */
+} PmmReg;
+
+typedef struct keyholeReg {
+ uint32 ctrlSts;
+ uint32 wrData;
+ uint32 mutex;
+ uint32 rdData;
+} keyholeReg;
+
+typedef struct PmbBus {
+ uint32 config; /* 0x0100 */
+ uint32 arbiter; /* 0x0104 */
+ uint32 timeout; /* 0x0108 */
+ uint32 unused1; /* 0x010c */
+ keyholeReg keyhole[4]; /* 0x0110-0x014f */
+ uint32 unused2[44]; /* 0x0150-0x01ff */
+ uint32 map[64]; /* 0x0200-0x02ff */
+}PmbBus;
+
+typedef struct CoreCtrl {
+ uint32 coreEnable; /* 0x0400 */
+ uint32 autoresetControl; /* 0x0404 */
+ uint32 coreIdle; /* 0x0408 */
+ uint32 coreResetCause; /* 0x040c */
+ uint32 memPwrDownCtrl0; /* 0x0410 */
+ uint32 memPwrDownSts0; /* 0x0414 */
+ uint32 memPwrDownCtrl1; /* 0x0418 */
+ uint32 memPwrDownSts1; /* 0x041c */
+ uint32 sysFlg0Status; /* 0x0420 */
+ uint32 sysFlg0Set; /* 0x0424 */
+ uint32 sysFlg0Clear; /* 0x0428 */
+ uint32 unused1; /* 0x042c */
+ uint32 usrFlg0Status; /* 0x0430 */
+ uint32 usrFlg0Set; /* 0x0434 */
+ uint32 usrFlg0Clear; /* 0x0438 */
+ uint32 unused2; /* 0x043c */
+ uint32 subsystemRev; /* 0x0440 */
+ uint32 resetVector; /* 0x0444 */
+} CoreCtrl;
+
+typedef struct CoreState {
+ uint32 sysMbx[8]; /* 0x0480 */
+ uint32 usrMbx[8]; /* 0x04a0 */
+ uint32 sysMtx[4]; /* 0x04c0 */
+ uint32 usrMtx[8]; /* 0x04d0 */
+} CoreState;
+
+typedef struct CoreIntr {
+ uint32 irqStatus; /* 0x0500 */
+ uint32 irqSet; /* 0x0504 */
+ uint32 irqClear; /* 0x0508 */
+ uint32 unused1; /* 0x050c */
+ uint32 srqStatus; /* 0x0510 */
+ uint32 srqSet; /* 0x0514 */
+ uint32 srqClear; /* 0x0518 */
+ uint32 unused2; /* 0x051c */
+ uint32 drqStatus; /* 0x0520 */
+ uint32 drqSet; /* 0x0524 */
+ uint32 drqClear; /* 0x0528 */
+ uint32 unused3; /* 0x052c */
+ uint32 frqStatus; /* 0x0530 */
+ uint32 frqSet; /* 0x0534 */
+ uint32 frqClear; /* 0x0538 */
+ uint32 unused4; /* 0x053c */
+ uint32 hostIrqLatched; /* 0x0540 */
+ uint32 hostIrqSet; /* 0x0544 */
+ uint32 hostIrqClear; /* 0x0548 */
+ uint32 hostIrqEnable; /* 0x054c */
+ uint32 obusFaultStatus; /* 0x0550 */
+ uint32 obusFaultClear; /* 0x0554 */
+ uint32 obusFaultAddr; /* 0x0558 */
+} CoreIntr;
+
+typedef struct CoreProfile {
+ uint32 mutex; /* 0x0580 */
+ uint32 lastConfPcLo; /* 0x0584 */
+ uint32 lastConfPcHi; /* 0x0588 */
+ uint32 lastPcLo; /* 0x058c */
+ uint32 lastPcHi; /* 0x0590 */
+ uint32 braTargetPc0Lo; /* 0x0594 */
+ uint32 braTargetPc0Hi; /* 0x0598 */
+ uint32 braTargetPc1Lo; /* 0x059c */
+ uint32 braTargetPc1Hi; /* 0x05a0 */
+ uint32 braTargetPc2Lo; /* 0x05a4 */
+ uint32 braTargetPc2Hi; /* 0x05a8 */
+ uint32 braTargetPc3Lo; /* 0x05ac */
+ uint32 braTargetPc3Hi; /* 0x05b0 */
+ uint32 unused[3]; /* 0x05b4-0x05bf */
+ uint32 profSampleW[4]; /* 0x05c0 */
+} CoreProfile;
+
+typedef struct MaestroMisc {
+ CoreCtrl coreCtrl; /* 0x0400 */
+ uint32 unused1[14]; /* 0x0448-0x047f */
+ CoreState coreState; /* 0x0480 */
+ uint32 unused2[4]; /* 0x04f0-0x04ff */
+ CoreIntr interrupt; /* 0x0500 */
+ uint32 unused3[9]; /* 0x055c-0x057f */
+ CoreProfile profile; /* 0x0580 */
+} MaestroMisc;
+
+typedef struct Pmc {
+ uint32 baseReserved; /* 0x0000 */
+ uint32 unused0[1029];
+ PmcCtrlReg ctrl; /* 0x1018 */
+
+ uint32 unused1[174]; /* 0x1148-0x13ff */
+
+ PmcTokenReg token; /* 0x1400 */
+ uint32 unused2[136]; /* 0x141c-0x163b */
+
+ PmcPerfPowReg perfPower; /* 0x163c */
+ uint32 unused3[175]; /* 0x1644-0x18ff */
+
+ PmcCntReg hwCounter; /* 0x1900 */
+ uint32 unused4[110]; /* 0x1948-0x1aff */
+
+ PmcDQMPac dqmPac; /* 0x1b00 */
+ uint32 unused5[32]; /* 0x1b80-0x1bff */
+
+ PmcDQMReg dqm; /* 0x1c00 */
+ uint32 unused6[749]; /* 0x1c4c-0x27ff */
+
+ uint32 qStatus[32]; /* 0x2800 */
+ uint32 unused7[480]; /* 0x2880-0x2fff */
+
+ PmcDqmQMibReg qMib; /* 0x3000 */
+ uint32 unused8[928]; /* 0x3180-0x3fff */
+
+ PmcDqmQCtrlReg dqmQCtrl[8]; /* 0x4000 */
+ uint32 unused9[992]; /* 0x4080-0x4fff */
+
+ PmcDqmQDataReg dqmQData[8]; /* 0x5000 */
+} Pmc;
+#define PMC ((volatile Pmc * const) PMC_BASE)
+
+typedef struct Procmon {
+ PmmReg pmm; /* 0x20000 */
+ uint32 unused11[22]; /* 0x20008-0x2005f */
+
+ SSBMaster ssbMasterCtrl; /* 0x20060 */
+ uint32 unused12[36]; /* 0x20070-0x200ff */
+
+ PmbBus pmb; /* 0x20100 */
+ uint32 unused13[64]; /* 0x20300-0x203ff */
+
+ MaestroMisc maestroReg; /* 0x20400 */
+} Procmon;
+#define PROCMON ((volatile Procmon * const) PROC_MON_BASE)
+
+typedef struct
+{
+ uint32 control;
+#define PMC_PMBM_START (1 << 31)
+#define PMC_PMBM_TIMEOUT (1 << 30)
+#define PMC_PMBM_SLAVE_ERR (1 << 29)
+#define PMC_PMBM_BUSY (1 << 28)
+#define PMC_PMBM_BUS_SHIFT (20)
+#define PMC_PMBM_Read (0 << 24)
+#define PMC_PMBM_Write (1 << 24)
+ uint32 wr_data;
+ uint32 mutex;
+ uint32 rd_data;
+} PMB_keyhole_reg;
+
+typedef struct PMBMaster {
+ uint32 config;
+#define PMB_NUM_REGS_SHIFT (20)
+#define PMB_NUM_REGS_MASK (0x3ff)
+ uint32 arbitger;
+ uint32 timeout;
+ uint32 reserved;
+ PMB_keyhole_reg keyhole[4];
+ uint32 reserved1[44];
+ uint32 map[64];
+} PMBMaster;
+#define PMB ((volatile PMBMaster * const) PMB_BASE)
+
+/*
+** Timer
+*/
+
+#define TIMER_64BIT
+typedef struct Timer {
+ uint64 TimerCtl0;
+ uint64 TimerCtl1;
+ uint64 TimerCtl2;
+ uint64 TimerCtl3;
+#define TIMERENABLE (1ULL << 63)
+#define RSTCNTCLR (1ULL << 62)
+ uint64 TimerCnt0;
+ uint64 TimerCnt1;
+ uint64 TimerCnt2;
+ uint64 TimerCnt3;
+#define TIMER_COUNT_MASK 0x3FFFFFFFFFFFFFFFULL
+ uint32 TimerMask;
+#define TIMER0EN 0x01
+#define TIMER1EN 0x02
+#define TIMER2EN 0x04
+#define TIMER3EN 0x08
+ uint32 TimerInts;
+#define TIMER0 0x01
+#define TIMER1 0x02
+#define TIMER2 0x04
+#define TIMER3 0x08
+ uint32 ResetStatus;
+#define PCIE_RESET_STATUS 0x10000000
+#define SW_RESET_STATUS 0x20000000
+#define HW_RESET_STATUS 0x40000000
+#define POR_RESET_STATUS 0x80000000
+#define RESET_STATUS_MASK 0xF0000000
+ uint32 ResetReason;
+#define SW_INI_RESET 0x00000001
+ uint32 spare[3];
+} Timer;
+
+typedef struct WDTimer {
+ uint32 WatchDogDefCount;/* Write 0xff00 0x00ff to Start timer
+ * Write 0xee00 0x00ee to Stop and re-load default count
+ * * Read from this register returns current watch dog count
+ * */
+ uint32 WatchDogCtl;
+
+ /* Number of 50-MHz ticks for WD Reset pulse to last */
+ uint32 WDResetCount;
+
+ uint32 SoftRst;
+#define SOFT_RESET 0x00000001
+ uint32 WDAccessCtl;
+} WDTimer;
+
+#define TIMER ((volatile Timer * const) TIMR_BASE)
+#define WDTIMER0 ((volatile WDTimer * const) WDTIMR0_BASE)
+
+typedef struct BIUCFG_Access {
+ uint32 permission; /* 0x0 */
+ uint32 sbox; /* 0x4 */
+ uint32 cpu_defeature; /* 0x8 */
+ uint32 dbg_security; /* 0xc */
+ uint32 rsvd1[32]; /* 0x10 - 0x8f */
+ uint64 violation[2]; /* 0x90 - 0x9f */
+ uint32 ts_access[2]; /* 0xa0 - 0xa7 */
+ uint32 rsvd2[22]; /* 0xa8 - 0xff */
+}BIUCFG_Access;
+
+typedef struct BIUCFG_Cluster {
+ uint32 permission; /* 0x0 */
+ uint32 config; /* 0x4 */
+ uint32 status; /* 0x8 */
+ uint32 control; /* 0xc */
+ uint32 cpucfg; /* 0x10 */
+ uint32 dbgrom; /* 0x14 */
+ uint32 rsvd1[2]; /* 0x18 - 0x1f */
+ uint64 rvbar_addr[4]; /* 0x20 - 0x3f */
+ uint32 rsvd2[48]; /* 0x40 - 0xff */
+}BIUCFG_Cluster;
+
+typedef struct BIUCFG_AuxClkCtrl {
+ uint32 clk_control; /* 0x0 */
+ uint32 clk_ramp; /* 0x4 */
+ uint32 clk_pattern; /* 0x8 */
+ uint32 rsvd; /* 0xC */
+} BIUCFG_AuxClkCtrl;
+
+typedef struct BIUCFG_Aux {
+ uint32 permission; /* 0 */
+ uint32 rsvd1[3]; /* 0x04 - 0x0c */
+ BIUCFG_AuxClkCtrl cluster_clkctrl[2]; /* 0x10 - 0x2c */
+ uint32 rsvd2[52]; /* 0x30 - 0xFF */
+} BIUCFG_Aux;
+
+
+typedef struct BIUCFG {
+ BIUCFG_Access access; /* 0x0 - 0xff*/
+ BIUCFG_Cluster cluster[1]; /* 0x100 - 0x1ff*/
+ uint32 rsvd1[320]; /* 0x200 - 0x6ff */
+ BIUCFG_Aux aux; /* 0x700 - 0x7ff */
+ uint32 rsvd2[2560]; /* 0x800 - 0x2fff */
+
+}BIUCFG;
+
+#define BIUCFG ((volatile BIUCFG * const) BIUCFG_BASE)
+
+#endif /* __ASSEMBLER__ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/6858_map_part.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/6858_map_part.h
new file mode 100755
index 0000000000..fd09161f9f
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/6858_map_part.h
@@ -0,0 +1,506 @@
+/*
+<:copyright-BRCM:2015:DUAL/GPL:standard
+
+ Copyright (c) 2015 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+
+*/
+
+#ifndef __BCM6858_MAP_PART_H
+#define __BCM6858_MAP_PART_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "bcmtypes.h"
+
+#define MEMC_PHYS_BASE 0x80180000
+#define MEMC_SIZE 0x24000
+
+#define PMC_PHYS_BASE 0x80200000
+#define PMC_SIZE 0x5000
+#define PROC_MON_PHYS_BASE 0x80280000
+#define PROC_MON_SIZE 0x1000
+
+#define PERF_PHYS_BASE 0xff800000
+#define PERF_SIZE 0x3000
+#define TIMR_OFFSET 0x2700
+#define WDTIMR0_OFFSET 0x2780
+#define WDTIMR1_OFFSET 0x27c0
+
+#define BIUCFG_PHYS_BASE 0x81060000
+#define BIUCFG_SIZE 0x3000
+#define BIUCFG_OFFSET 0x0000
+
+#define GIC_PHYS_BASE 0x81000000
+#define GIC_SIZE 0x10000
+#define GIC_OFFSET 0x0000
+#define GICD_OFFSET 0x1000
+#define GICC_OFFSET 0x2000
+
+#define PMC_BASE (PMC_PHYS_BASE + 0)
+#define PROC_MON_BASE (PROC_MON_PHYS_BASE + 0)
+
+#define WDTIMR0_BASE (PERF_PHYS_BASE + WDTIMR0_OFFSET)
+#define TIMR_BASE (PERF_PHYS_BASE + TIMR_OFFSET)
+
+#define BIUCFG_BASE (BIUCFG_PHYS_BASE + BIUCFG_OFFSET)
+
+#ifndef __ASSEMBLER__
+/*
+ * Power Management Control
+ */
+typedef struct PmcCtrlReg {
+ /* 0x00 */
+ uint32 l1Irq4keMask;
+ uint32 l1Irq4keStatus;
+ uint32 l1IrqMipsMask;
+ uint32 l1IrqMipsStatus;
+ /* 0x10 */
+ uint32 l2IrqGpMask;
+ uint32 l2IrqGpStatus;
+ uint32 gpTmr0Ctl;
+ uint32 gpTmr0Cnt;
+ /* 0x20 */
+ uint32 gpTmr1Ctl;
+ uint32 gpTmr1Cnt;
+ uint32 hostMboxIn;
+ uint32 hostMboxOut;
+ /* 0x30 */
+#define PMC_CTRL_GP_FLASH_BOOT_STALL 0x00000080
+ uint32 gpOut;
+ uint32 gpIn;
+ uint32 gpInIrqMask;
+ uint32 gpInIrqStatus;
+ /* 0x40 */
+ uint32 dmaCtrl;
+ uint32 dmaStatus;
+ uint32 dma0_3FifoStatus;
+ uint32 unused0[3]; /* 0x4c-0x57 */
+ /* 0x58 */
+ uint32 l1IrqMips1Mask;
+ uint32 diagControl;
+ /* 0x60 */
+ uint32 diagHigh;
+ uint32 diagLow;
+ uint32 badAddr;
+ uint32 addr1WndwMask;
+ /* 0x70 */
+ uint32 addr1WndwBaseIn;
+ uint32 addr1WndwBaseOut;
+ uint32 addr2WndwMask;
+ uint32 addr2WndwBaseIn;
+ /* 0x80 */
+ uint32 addr2WndwBaseOut;
+ uint32 scratch;
+ uint32 tm;
+ uint32 softResets;
+ /* 0x90 */
+ uint32 eb2ubusTimeout;
+ uint32 m4keCoreStatus;
+ uint32 gpInIrqSense;
+ uint32 ubSlaveTimeout;
+ /* 0xa0 */
+ uint32 diagEn;
+ uint32 devTimeout;
+ uint32 ubusErrorOutMask;
+ uint32 diagCaptStopMask;
+ /* 0xb0 */
+ uint32 revId;
+ uint32 gpTmr2Ctl;
+ uint32 gpTmr2Cnt;
+ uint32 legacyMode;
+ /* 0xc0 */
+ uint32 smisbMonitor;
+ uint32 diagCtrl;
+ uint32 diagStat;
+ uint32 diagMask;
+ /* 0xd0 */
+ uint32 diagRslt;
+ uint32 diagCmp;
+ uint32 diagCapt;
+ uint32 diagCnt;
+ /* 0xe0 */
+ uint32 diagEdgeCnt;
+ uint32 unused1[4]; /* 0xe4-0xf3 */
+ /* 0xf4 */
+ uint32 iopPeriphBaseAddr;
+ uint32 lfsr;
+ uint32 unused2; /* 0xfc-0xff */
+} PmcCtrlReg;
+
+typedef struct PmcOutFifoReg {
+ uint32 msgCtrl; /* 0x00 */
+ uint32 msgSts; /* 0x04 */
+ uint32 unused[14]; /* 0x08-0x3f */
+ uint32 msgData[16]; /* 0x40-0x7c */
+} PmcOutFifoReg;
+
+typedef struct PmcInFifoReg {
+ uint32 msgCtrl; /* 0x00 */
+ uint32 msgSts; /* 0x04 */
+ uint32 unused[13]; /* 0x08-0x3b */
+ uint32 msgLast; /* 0x3c */
+ uint32 msgData[16]; /* 0x40-0x7c */
+} PmcInFifoReg;
+
+typedef struct PmcDmaReg {
+ /* 0x00 */
+ uint32 src;
+ uint32 dest;
+ uint32 cmdList;
+ uint32 lenCtl;
+ /* 0x10 */
+ uint32 rsltSrc;
+ uint32 rsltDest;
+ uint32 rsltHcs;
+ uint32 rsltLenStat;
+} PmcDmaReg;
+
+typedef struct PmcTokenReg {
+ /* 0x00 */
+ uint32 bufSize;
+ uint32 bufBase;
+ uint32 idx2ptrIdx;
+ uint32 idx2ptrPtr;
+ /* 0x10 */
+ uint32 unused[2];
+ uint32 bufSize2;
+} PmcTokenReg;
+
+typedef struct PmcPerfPowReg {
+ /* 0x00 */
+ uint32 dcacheHit;
+ uint32 dcacheMiss;
+ uint32 icacheHit;
+ uint32 icacheMiss;
+ /* 0x10 */
+ uint32 instnComplete;
+ uint32 wtbMerge;
+ uint32 wtbNoMerge;
+ uint32 itlbHit;
+ /* 0x20 */
+ uint32 itlbMiss;
+ uint32 dtlbHit;
+ uint32 dtlbMiss;
+ uint32 jtlbHit;
+ /* 0x30 */
+ uint32 jtlbMiss;
+ uint32 powerSubZone;
+ uint32 powerMemPda;
+ uint32 freqScalarCtrl;
+ /* 0x40 */
+ uint32 freqScalarMask;
+} PmcPerfPowReg;
+
+typedef struct PmcDQMReg {
+ /* 0x00 */
+ uint32 cfg;
+ uint32 _4keLowWtmkIrqMask;
+ uint32 mipsLowWtmkIrqMask;
+ uint32 lowWtmkIrqMask;
+ /* 0x10 */
+ uint32 _4keNotEmptyIrqMask;
+ uint32 mipsNotEmptyIrqMask;
+ uint32 notEmptyIrqSts;
+ uint32 queueRst;
+ /* 0x20 */
+ uint32 notEmptySts;
+ uint32 nextAvailMask;
+ uint32 nextAvailQueue;
+ uint32 mips1LowWtmkIrqMask;
+ /* 0x30 */
+ uint32 mips1NotEmptyIrqMask;
+ uint32 autoSrcPidInsert;
+} PmcDQMReg;
+
+typedef struct PmcCntReg {
+ uint32 cntr[10];
+ uint32 unused[6]; /* 0x28-0x3f */
+ uint32 cntrIrqMask;
+ uint32 cntrIrqSts;
+} PmcCntReg;
+
+typedef struct PmcDqmQCtrlReg {
+ uint32 size;
+ uint32 cfga;
+ uint32 cfgb;
+ uint32 cfgc;
+} PmcDqmQCtrlReg;
+
+typedef struct PmcDqmQDataReg {
+ uint32 word[4];
+} PmcDqmQDataReg;
+
+typedef struct PmcDqmQMibReg {
+ uint32 qNumFull[32];
+ uint32 qNumEmpty[32];
+ uint32 qNumPushed[32];
+} PmcDqmQMibReg;
+
+typedef struct Pmc {
+ uint32 baseReserved; /* 0x0000 */
+ uint32 unused0[1023];
+ PmcCtrlReg ctrl; /* 0x1000 */
+
+ PmcOutFifoReg outFifo; /* 0x1100 */
+ uint32 unused1[32]; /* 0x1180-0x11ff */
+ PmcInFifoReg inFifo; /* 0x1200 */
+ uint32 unused2[32]; /* 0x1280-0x12ff */
+
+ PmcDmaReg dma[2]; /* 0x1300 */
+ uint32 unused3[48]; /* 0x1340-0x13ff */
+
+ PmcTokenReg token; /* 0x1400 */
+ uint32 unused4[121]; /* 0x141c-0x15ff */
+
+ PmcPerfPowReg perfPower; /* 0x1600 */
+ uint32 unused5[47]; /* 0x1644-0x16ff */
+
+ uint32 msgId[32]; /* 0x1700 */
+ uint32 unused6[32]; /* 0x1780-0x17ff */
+
+ PmcDQMReg dqm; /* 0x1800 */
+ uint32 unused7[50]; /* 0x1838-0x18ff */
+
+ PmcCntReg hwCounter; /* 0x1900 */
+ uint32 unused8[46]; /* 0x1948-0x19ff */
+
+ PmcDqmQCtrlReg dqmQCtrl[32]; /* 0x1a00 */
+ PmcDqmQDataReg dqmQData[32]; /* 0x1c00 */
+ uint32 unused9[64]; /* 0x1e00-0x1eff */
+
+ uint32 qStatus[32]; /* 0x1f00 */
+ uint32 unused10[32]; /* 0x1f80-0x1fff */
+
+ PmcDqmQMibReg qMib; /* 0x2000 */
+ uint32 unused11[1952]; /* 0x2180-0x3ffff */
+
+ uint32 sharedMem[8192]; /* 0x4000-0xbffc */
+} Pmc;
+
+#define PMC ((volatile Pmc * const) PMC_BASE)
+
+/*
+ * Process Monitor Module
+ */
+typedef struct PMRingOscillatorControl {
+ uint32 control;
+ uint32 en_lo;
+ uint32 en_mid;
+ uint32 en_hi;
+ uint32 idle_lo;
+ uint32 idle_mid;
+ uint32 idle_hi;
+} PMRingOscillatorControl;
+
+#define RCAL_0P25UM_HORZ 0
+#define RCAL_0P25UM_VERT 1
+#define RCAL_0P5UM_HORZ 2
+#define RCAL_0P5UM_VERT 3
+#define RCAL_1UM_HORZ 4
+#define RCAL_1UM_VERT 5
+#define PMMISC_RMON_EXT_REG ((RCAL_1UM_VERT + 1)/2)
+#define PMMISC_RMON_VALID_MASK (0x1<<16)
+typedef struct PMMiscControl {
+ uint32 gp_out;
+ uint32 clock_select;
+ uint32 unused[2];
+ uint32 misc[4];
+} PMMiscControl;
+
+typedef struct PMSSBMasterControl {
+ uint32 control;
+ uint32 wr_data;
+ uint32 rd_data;
+} PMSSBMasterControl;
+
+typedef struct PMEctrControl {
+ uint32 control;
+ uint32 interval;
+ uint32 thresh_lo;
+ uint32 thresh_hi;
+ uint32 count;
+} PMEctrControl;
+
+typedef struct PMBMaster {
+ uint32 ctrl;
+#define PMC_PMBM_START (1 << 31)
+#define PMC_PMBM_TIMEOUT (1 << 30)
+#define PMC_PMBM_SLAVE_ERR (1 << 29)
+#define PMC_PMBM_BUSY (1 << 28)
+#define PMC_PMBM_Read (0 << 20)
+#define PMC_PMBM_Write (1 << 20)
+ uint32 wr_data;
+ uint32 timeout;
+ uint32 rd_data;
+ uint32 unused[4];
+} PMBMaster;
+
+typedef struct PMAPVTMONControl {
+ uint32 control;
+ uint32 reserved;
+ uint32 cfg_lo;
+ uint32 cfg_hi;
+ uint32 data;
+ uint32 vref_data;
+ uint32 unused[2];
+ uint32 ascan_cfg;
+ uint32 warn_temp;
+ uint32 reset_temp;
+ uint32 temp_value;
+ uint32 data1_value;
+ uint32 data2_value;
+ uint32 data3_value;
+} PMAPVTMONControl;
+
+typedef struct PMUBUSCfg {
+ uint32 window[8];
+ uint32 control;
+} PMUBUSCfg;
+
+typedef struct ProcessMonitorRegs {
+ uint32 MonitorCtrl; /* 0x00 */
+ uint32 unused0[7];
+ PMRingOscillatorControl ROSC; /* 0x20 */
+ uint32 unused1;
+ PMMiscControl Misc; /* 0x40 */
+ PMSSBMasterControl SSBMaster; /* 0x60 */
+ uint32 unused2[5];
+ PMEctrControl Ectr; /* 0x80 */
+ uint32 unused3[11];
+ PMBMaster PMBM[2]; /* 0xc0 */
+ PMAPVTMONControl APvtmonCtrl; /* 0x100 */
+ uint32 unused4[9];
+ PMUBUSCfg UBUSCfg; /* 0x160 */
+} ProcessMonitorRegs;
+
+#define PROCMON ((volatile ProcessMonitorRegs * const) PROC_MON_BASE)
+
+
+/*
+** Timer
+*/
+#define TIMER_64BIT
+typedef struct Timer {
+ uint64 TimerCtl0;
+ uint64 TimerCtl1;
+ uint64 TimerCtl2;
+ uint64 TimerCtl3;
+#define TIMERENABLE (1ULL << 63)
+#define RSTCNTCLR (1ULL << 62)
+ uint64 TimerCnt0;
+ uint64 TimerCnt1;
+ uint64 TimerCnt2;
+ uint64 TimerCnt3;
+#define TIMER_COUNT_MASK 0x3FFFFFFFFFFFFFFFULL
+ uint32 TimerMask;
+#define TIMER0EN 0x01
+#define TIMER1EN 0x02
+#define TIMER2EN 0x04
+#define TIMER3EN 0x08
+ uint32 TimerInts;
+#define TIMER0 0x01
+#define TIMER1 0x02
+#define TIMER2 0x04
+#define TIMER3 0x08
+ uint32 ResetStatus;
+#define PCIE_RESET_STATUS 0x10000000
+#define SW_RESET_STATUS 0x20000000
+#define HW_RESET_STATUS 0x40000000
+#define POR_RESET_STATUS 0x80000000
+#define RESET_STATUS_MASK 0xF0000000
+ uint32 ResetReason;
+#define SW_INI_RESET 0x00000001
+ uint32 spare[3];
+} Timer;
+
+typedef struct WDTimer {
+ uint32 WatchDogDefCount;/* Write 0xff00 0x00ff to Start timer
+ * Write 0xee00 0x00ee to Stop and re-load default count
+ * * Read from this register returns current watch dog count
+ * */
+ uint32 WatchDogCtl;
+
+ /* Number of 50-MHz ticks for WD Reset pulse to last */
+ uint32 WDResetCount;
+
+ uint32 SoftRst;
+#define SOFT_RESET 0x00000001
+ uint32 WDAccessCtl;
+} WDTimer;
+
+#define TIMER ((volatile Timer * const) TIMR_BASE)
+#define WDTIMER0 ((volatile WDTimer * const) WDTIMR0_BASE)
+
+typedef struct BIUCFG_Access {
+ uint32 permission; /* 0x0 */
+ uint32 sbox; /* 0x4 */
+ uint32 cpu_defeature; /* 0x8 */
+ uint32 dbg_security; /* 0xc */
+ uint32 rsvd1[32]; /* 0x10 - 0x8f */
+ uint64 violation[2]; /* 0x90 - 0x9f */
+ uint32 ts_access[2]; /* 0xa0 - 0xa7 */
+ uint32 rsvd2[22]; /* 0xa8 - 0xff */
+}BIUCFG_Access;
+
+typedef struct BIUCFG_Cluster {
+ uint32 permission; /* 0x0 */
+ uint32 config; /* 0x4 */
+ uint32 status; /* 0x8 */
+ uint32 control; /* 0xc */
+ uint32 cpucfg; /* 0x10 */
+ uint32 dbgrom; /* 0x14 */
+ uint32 rsvd1[2]; /* 0x18 - 0x1f */
+ uint32 rvbar_addr[4]; /* 0x20 - 0x2f */
+ uint32 rsvd2[52]; /* 0x30 - 0xff */
+}BIUCFG_Cluster;
+
+typedef struct BIUCFG_AuxClkCtrl {
+ uint32 clk_control; /* 0x0 */
+ uint32 clk_ramp; /* 0x4 */
+ uint32 clk_pattern; /* 0x8 */
+ uint32 rsvd; /* 0xC */
+} BIUCFG_AuxClkCtrl;
+
+typedef struct BIUCFG_Aux {
+ uint32 permission; /* 0 */
+ uint32 rsvd1[3]; /* 0x04 - 0x0c */
+ BIUCFG_AuxClkCtrl cluster_clkctrl[2]; /* 0x10 - 0x2c */
+ uint32 rsvd2[52]; /* 0x30 - 0xFF */
+} BIUCFG_Aux;
+
+typedef struct BIUCFG {
+ BIUCFG_Access access; /* 0x0 - 0xff*/
+ BIUCFG_Cluster cluster[1]; /* 0x100 - 0x1ff*/
+ uint32 rsvd1[320]; /* 0x200 - 0x6ff */
+ BIUCFG_Aux aux; /* 0x700 - 0x7ff */
+ uint32 rsvd2[2560]; /* 0x800 - 0x2fff */
+
+}BIUCFG;
+#define BIUCFG ((volatile BIUCFG * const) BIUCFG_BASE)
+
+#endif /* __ASSEMBLER__ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/6878_map_part.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/6878_map_part.h
new file mode 100755
index 0000000000..599aed06f0
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/6878_map_part.h
@@ -0,0 +1,305 @@
+/*
+<:copyright-BRCM:2015:DUAL/GPL:standard
+
+ Copyright (c) 2015 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+
+*/
+
+#ifndef __BCM6878_MAP_PART_H
+#define __BCM6878_MAP_PART_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "bcmtypes.h"
+
+#define MEMC_PHYS_BASE 0x80180000
+#define MEMC_SIZE 0x24000
+
+#define PMC_PHYS_BASE 0xffb20000
+#define PMC_SIZE 0x1000
+#define PMB_OFFSET 0x100
+
+#define PERF_PHYS_BASE 0xff800000
+#define PERF_SIZE 0x13000
+#define TIMR_OFFSET 0x0400
+#define WDTIMR0_OFFSET 0x0480
+#define WDTIMR1_OFFSET 0x04c0
+
+#define BIUCFG_PHYS_BASE 0x81060000
+#define BIUCFG_SIZE 0x3000
+#define BIUCFG_OFFSET 0x0000
+
+#define BOOTLUT_PHYS_BASE 0xffff0000
+#define BOOTLUT_SIZE 0x1000
+
+#define GIC_PHYS_BASE 0x81000000
+#define GIC_SIZE 0x10000
+#define GIC_OFFSET 0x0000
+#define GICD_OFFSET 0x1000
+#define GICC_OFFSET 0x2000
+
+#define PMC_BASE (PMC_PHYS_BASE + 0)
+#define PMB_BASE (PMC_PHYS_BASE + PMB_OFFSET)
+
+#define WDTIMR0_BASE (PERF_PHYS_BASE + WDTIMR0_OFFSET)
+#define TIMR_BASE (PERF_PHYS_BASE + TIMR_OFFSET)
+
+#define BIUCFG_BASE (BIUCFG_PHYS_BASE + BIUCFG_OFFSET)
+
+
+#ifndef __ASSEMBLER__
+
+/*
+ * Power Management Control
+ */
+
+typedef union
+{
+ struct
+ {
+ uint32 propagate_to_err : 1; // [00:00] -+
+ uint32 propagate_slv_err : 1; // [01:01] | - these are potentially dangerous and MAY cause a system crash
+ uint32 pmbus_reset_n : 1; // [02:02] -+
+ uint32 reserved0 : 1; // [03:03]
+ uint32 maxPmbIdx : 3; // [06:04] 0-based (0-7)
+ uint32 reserved1 : 1; // [07:07]
+ uint32 maxClientId : 12; // [19:08] 0-based (theoreticaly 0-4095, but code limits this to 256 devices - 0-255)
+ uint32 numRegsPerClient : 10; // [29:20] some power of 2 - number of 32-bit registers in each client (max = 512)
+ uint32 startDiscovery : 1; // [30:30] kicks off H/W discovery of clients and fills in the map (see PMB_REGS below)
+ uint32 discoveryBusy : 1; // [31:31] whether or not H/W discovery is still busy creating the map
+ } Bits;
+ uint32 Reg32;
+} PMB_CONFIG_REG;
+
+typedef union
+{
+ struct {
+ uint32 data : 16; // [15:00]
+ uint32 reserved1 : 16; // [31:16]
+ } Bits;
+ uint32 Reg32;
+} SSBM_data_reg;
+
+typedef union
+{
+ struct {
+ uint32 ssb_addr : 10; // [09:00]
+ uint32 ssb_cmd : 2; // [11:10]
+ uint32 ssb_en : 1; // [12:12]
+ uint32 ssb_add_pre : 1; // [13:13]
+ uint32 reserved2 : 1; // [14:14]
+ uint32 ssb_start : 1; // [15:15]
+ uint32 reserved1 : 16; // [31:16]
+ } Bits;
+ uint32 Reg32;
+} SSBM_control_reg;
+
+typedef union
+{
+ struct {
+ uint32 busy : 1; // [00:00]
+ uint32 reserved1 : 31; // [31:01]
+ } Bits;
+ uint32 Reg32;
+} SSBM_status_reg;
+
+typedef union
+{
+ struct {
+ uint32 swreg_th_lo : 8; // [07:00]
+ uint32 swreg_th_hi : 8; // [15:08]
+ uint32 reserved :16; // [31:16]
+ } Bits;
+ uint32 Reg32;
+} SSBM_SWREG_th_hilo_reg;
+
+typedef union
+{
+ struct {
+ uint32 ssb_lock_addr : 10; // [09:00]
+ uint32 lock_bit : 1; // [10:10]
+ uint32 lock_mode : 1; // [11:11]
+ uint32 reserved : 20; // [31:12]
+ } Bits;
+ uint32 Reg32;
+} SSBM_SWREG_lock_reg;
+
+#define kSSBWrite 0x01
+#define kSSBRead 0x02
+#define kSSBEn (1 << 12)
+#define kSSBStart (1 << 15)
+
+typedef struct SSBMaster {
+ SSBM_control_reg ssbmControl; /* 0x0060 */
+ SSBM_data_reg ssbmWrData; /* 0x0064 */
+ SSBM_data_reg ssbmRdData; /* 0x0068 */
+ SSBM_status_reg ssbmStatus; /* 0x006c */
+ SSBM_SWREG_th_hilo_reg ssbmThHiLo; /* 0x0070 */
+ SSBM_SWREG_lock_reg ssbmSwLock; /* 0x0074 */
+} SSBMaster;
+
+typedef struct PmmReg {
+ uint32 memPowerCtrl; /* 0x0000 */
+ uint32 regSecurityConfig; /* 0x0004 */
+} PmmReg;
+
+typedef struct keyholeReg {
+ uint32 ctrlSts;
+ uint32 wrData;
+ uint32 mutex;
+ uint32 rdData;
+} keyholeReg;
+
+typedef struct PmbBus {
+ PMB_CONFIG_REG config; /* 0x0100 */
+ uint32 arbiter; /* 0x0104 */
+ uint32 timeout; /* 0x0108 */
+ uint32 unused1; /* 0x010c */
+ keyholeReg keyhole[4]; /* 0x0110-0x014f */
+ uint32 unused2[44]; /* 0x0150-0x01ff */
+ uint32 map[64]; /* 0x0200-0x02ff */
+}PmbBus;
+
+typedef struct Pmc {
+ PmmReg pmm; /* 0x20000 */
+ uint32 unused11[22]; /* 0x20008-0x2005f */
+ SSBMaster ssbMasterCtrl; /* 0x20060-0x20077 */
+ uint32 unused12[34]; /* 0x20078-0x200ff */
+ PmbBus pmb; /* 0x20100 */
+} Pmc;
+#define PMC ((volatile Pmc * const) PMC_BASE)
+
+typedef struct
+{
+ uint32 control;
+#define PMC_PMBM_START (1 << 31)
+#define PMC_PMBM_TIMEOUT (1 << 30)
+#define PMC_PMBM_SLAVE_ERR (1 << 29)
+#define PMC_PMBM_BUSY (1 << 28)
+#define PMC_PMBM_BUS_SHIFT (20)
+#define PMC_PMBM_Read (0 << 24)
+#define PMC_PMBM_Write (1 << 24)
+ uint32 wr_data;
+ uint32 mutex;
+ uint32 rd_data;
+} PMB_keyhole_reg;
+
+typedef struct PMBMaster {
+ uint32 config;
+#define PMB_NUM_REGS_SHIFT (20)
+#define PMB_NUM_REGS_MASK (0x3ff)
+ uint32 arbitger;
+ uint32 timeout;
+ uint32 reserved;
+ PMB_keyhole_reg keyhole[4];
+ uint32 reserved1[44];
+ uint32 map[64];
+} PMBMaster;
+#define PMB ((volatile PMBMaster * const) PMB_BASE)
+
+/*
+** Timer
+*/
+#define TIMER_64BIT
+typedef struct Timer {
+ uint64 TimerCtl0;
+ uint64 TimerCtl1;
+ uint64 TimerCtl2;
+ uint64 TimerCtl3;
+#define TIMERENABLE (1ULL << 63)
+#define RSTCNTCLR (1ULL << 62)
+ uint64 TimerCnt0;
+ uint64 TimerCnt1;
+ uint64 TimerCnt2;
+ uint64 TimerCnt3;
+#define TIMER_COUNT_MASK 0x3FFFFFFFFFFFFFFFULL
+ uint32 TimerMask;
+#define TIMER0EN 0x01
+#define TIMER1EN 0x02
+#define TIMER2EN 0x04
+#define TIMER3EN 0x08
+ uint32 TimerInts;
+#define TIMER0 0x01
+#define TIMER1 0x02
+#define TIMER2 0x04
+#define TIMER3 0x08
+ uint32 ResetReason;
+#define SW_INI_RESET 0x00000001
+ uint32 spare[3];
+} Timer;
+
+typedef struct WDTimer {
+ uint32 WatchDogDefCount;/* Write 0xff00 0x00ff to Start timer
+ * Write 0xee00 0x00ee to Stop and re-load default count
+ * * * Read from this register returns current watch dog count
+ * * */
+ uint32 WatchDogCtl;
+
+ /* Number of 50-MHz ticks for WD Reset pulse to last */
+ uint32 WDResetCount;
+
+ uint32 WDTimerCtl;
+#define SOFT_RESET 0x00000001
+ uint32 WDAccessCtl;
+} WDTimer;
+
+#define TIMER ((volatile Timer * const) TIMR_BASE)
+#define WDTIMER0 ((volatile WDTimer * const) WDTIMR0_BASE)
+
+typedef struct BIUCFG_Access {
+ uint32 permission; /* 0x0 */
+ uint32 revd0; /* 0x4 */
+ uint32 cpu_defeature; /* 0x8 */
+ uint32 dbg_security; /* 0xc */
+ uint32 rsvd1[36]; /* 0x10 - 0x9f */
+ uint32 ts_access; /* 0xa0 - 0xa3 */
+ uint32 rsvd2[23]; /* 0xa4 - 0xff */
+}BIUCFG_Access;
+
+
+typedef struct BIUCFG_Cluster {
+ uint32 permission; /* 0x0 */
+ uint32 config; /* 0x4 */
+ uint32 status; /* 0x8 */
+ uint32 control; /* 0xc */
+ uint32 cpucfg; /* 0x10 */
+ uint32 dbgrom; /* 0x14 */
+ uint32 rsvd1[2]; /* 0x18 - 0x1f */
+ uint64 rvbar_addr[4]; /* 0x20 - 0x3f */
+ uint32 rsvd2[48]; /* 0x40 - 0xff */
+}BIUCFG_Cluster;
+
+typedef struct BIUCFG {
+ BIUCFG_Access access; /* 0x0 - 0xff*/
+ BIUCFG_Cluster cluster[2]; /* 0x100 - 0x2ff*/
+ uint32 anonymous[2880]; /* 0x300 - 0x2fff*/
+}BIUCFG;
+#define BIUCFG ((volatile BIUCFG * const) BIUCFG_BASE)
+
+#endif /* __ASSEMBLER__ */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/bcm_mem_reserve.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/bcm_mem_reserve.h
new file mode 100644
index 0000000000..58a2503060
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/bcm_mem_reserve.h
@@ -0,0 +1,96 @@
+/*
+<:copyright-BRCM:2019:DUAL/GPL:standard
+
+ Copyright (c) 2019 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+
+*/
+#ifndef _BCM_MEM_RESERVE_H
+#define _BCM_MEM_RESERVE_H
+
+
+/* Push DTB higher as it will be removed by Linux alter on */
+/* Address range Size(KB)
+ 0x00000000:0x00004000 16 to boot secondary ARM CPU
+ 0x00004000:0x000C0000 752 to keep ATF firmware
+ 0x000C0000:0x000F0000 192 to keep PMC firmware
+ 0x000F0000:0x00100000 64 to keep PMC firmware log
+
+ Any change in the following defines must be reflected in Linux device tree (/memreserve)
+*/
+#if defined(CONFIG_ARM64)
+#define CFG_BOOT_AREA_ADDR 0
+#else
+#define CFG_BOOT_AREA_ADDR 0x1000
+#define ARM_ATAG_LOC CFG_DTB_ADDRESS
+#endif
+#define CFG_BOOT_AREA_SIZE (0x4000 - CFG_BOOT_AREA_ADDR)
+
+/* ATF reserved memory */
+#define CFG_ATF_AREA_ADDR (CFG_BOOT_AREA_ADDR + CFG_BOOT_AREA_SIZE)
+#define CFG_ATF_AREA_SIZE 0xBC000 // Total ATF reserved memory size 752KB
+
+/* PMC reserved memory */
+#define PMC_RESERVED_MEM_START (CFG_ATF_AREA_ADDR + CFG_ATF_AREA_SIZE)
+#define PMC_RESERVED_MEM_SIZE 0x40000 // Total PMC reserved memory size 256KB
+
+#ifdef CONFIG_BCM963148
+/* Reuse unused PMC reserved memory for DSL */
+#define DSL_RESERVED_MEM_START PMC_RESERVED_MEM_START
+#define DSL_RESERVED_MEM_SIZE PMC_RESERVED_MEM_SIZE
+#endif
+
+#define CFG_BOOT_PMC_LOG_SIZE 0x10000 // Leave 64K reserved memory for PMC log
+#define CFG_BOOT_PMC_ADDR (PMC_RESERVED_MEM_START)
+#define CFG_BOOT_PMC_SIZE (PMC_RESERVED_MEM_SIZE - CFG_BOOT_PMC_LOG_SIZE) // Memory reserved for PMC firmware
+#define CFG_BOOT_PMC_LOG_ADDR (PMC_RESERVED_MEM_START + CFG_BOOT_PMC_SIZE)
+
+
+/* **NOTE** any change in CFG_BOOT_PMC_ADDR must be reflected in PMC makefiles */
+
+/* OPTEE reserved memory */
+#define CFG_OPTEE_AREA_ADDR (PMC_RESERVED_MEM_START + PMC_RESERVED_MEM_SIZE)
+#define CFG_OPTEE_CORE_SIZE 0x400000 // Total OPTEE reserved memory size 4096KB
+#define CFG_OPTEE_SHRM_SIZE 0x100000 // Shared memory 1024KB between OPTEE and Linux
+#define CFG_OPTEE_SHRM_ADDR (CFG_OPTEE_AREA_ADDR + CFG_OPTEE_CORE_SIZE)
+#define CFG_OPTEE_AREA_SIZE (CFG_OPTEE_CORE_SIZE + CFG_OPTEE_SHRM_SIZE)
+
+#ifdef CONFIG_OPTEE
+#define CFG_MAX_RESV_AREA (CFG_OPTEE_AREA_ADDR + CFG_OPTEE_AREA_SIZE)
+#else
+#define CFG_MAX_RESV_AREA (PMC_RESERVED_MEM_START + PMC_RESERVED_MEM_SIZE)
+#endif
+
+#if ( CFG_MAX_RESV_AREA > 0x600000 )
+#error "Reserved memory exceeded the allowed (6MB) limit"
+#endif
+
+
+#if ( CFG_MAX_RESV_AREA != 0x100000 ) && ( CFG_MAX_RESV_AREA != 0x600000 )
+#error "Time to update kernel/linux-4.x/arch/armxx/Makefile"
+#endif
+
+#if defined(CONFIG_ARM64)
+#define LINUX_START_ADDR CFG_MAX_RESV_AREA
+#else
+/* For 32 bit ARM, Linux needs extra 32K head room for MMU table */
+#define LINUX_START_ADDR (CFG_MAX_RESV_AREA + 0x8000)
+#endif
+
+#endif /* _BCM_MEM_RESERVE_H */
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/bcmtypes.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/bcmtypes.h
new file mode 100644
index 0000000000..3e71c66c8b
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm963xx/bcmtypes.h
@@ -0,0 +1,162 @@
+/*
+ Copyright 2007-2015 Broadcom Corporation
+
+ <:label-BRCM:2015:DUAL/GPL:standard
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License, version 2, as published by
+ the Free Software Foundation (the "GPL").
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+
+ A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+ writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA.
+
+ :>
+*/
+
+//
+// bcmtypes.h - misc useful typedefs
+//
+#ifndef BCMTYPES_H
+#define BCMTYPES_H
+
+#ifndef __ASSEMBLER__
+
+// These are also defined in typedefs.h in the application area, so I need to
+// protect against re-definition.
+
+#ifndef _TYPEDEFS_H_
+
+typedef unsigned char uint8;
+typedef unsigned short uint16;
+typedef unsigned int uint32;
+typedef unsigned long long uint64;
+typedef signed char int8;
+typedef signed short int16;
+typedef signed int int32;
+typedef signed long long int64;
+typedef unsigned long BcmHandle;
+
+#if !defined(__cplusplus) && !defined(__KERNEL__) && !defined(_LINUX_TYPES_H) && !defined(_LINUX_IF_H) && !defined(_ATF_)
+typedef int bool;
+#endif
+
+#endif
+
+typedef unsigned char byte;
+
+typedef unsigned long HANDLE,*PULONG;
+typedef int DWORD,*PDWORD;
+#ifndef LONG
+typedef signed long LONG,*PLONG;
+#endif
+
+typedef unsigned int *PUINT;
+typedef signed int INT;
+
+typedef unsigned short *PUSHORT;
+typedef signed short SHORT,*PSHORT;
+typedef unsigned short WORD,*PWORD;
+
+typedef unsigned char *PUCHAR;
+typedef signed char *PCHAR;
+
+typedef void *PVOID;
+
+typedef unsigned char BOOLEAN, *PBOOL, *PBOOLEAN;
+
+typedef unsigned char BYTE,*PBYTE;
+
+typedef signed int *PINT;
+
+#ifndef NUMBER_TYPES_ALREADY_DEFINED
+#define NUMBER_TYPES_ALREADY_DEFINED
+typedef signed char INT8;
+typedef signed char SINT8;
+typedef signed short INT16;
+typedef signed short SINT16;
+typedef signed int INT32;
+typedef signed int sint32;
+typedef signed int SINT32;
+typedef signed long long SINT64;
+
+typedef unsigned char UINT8;
+typedef unsigned short UINT16;
+typedef unsigned int UINT32;
+typedef unsigned long long UINT64;
+#endif
+
+#ifndef BOOL_TYPE_ALREADY_DEFINED
+#define BOOL_TYPE_ALREADY_DEFINED
+typedef unsigned char UBOOL8;
+#endif
+
+#ifndef BASE_TYPE_ALREADY_DEFINED
+#define BASE_TYPE_ALREADY_DEFINED
+typedef unsigned char UCHAR;
+typedef unsigned short USHORT;
+typedef unsigned int UINT;
+typedef unsigned long ULONG;
+#endif
+
+typedef void VOID;
+typedef unsigned char BOOL;
+
+// These are also defined in typedefs.h in the application area, so I need to
+// protect against re-definition.
+#ifndef TYPEDEFS_H
+
+// Maximum and minimum values for a signed 16 bit integer.
+#define MAX_INT16 32767
+#define MIN_INT16 -32768
+
+// Useful for true/false return values. This uses the
+// Taligent notation (k for constant).
+typedef enum
+{
+ kFalse = 0,
+ kTrue = 1
+} Bool;
+
+#endif
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+#define READ32(addr) (*(volatile UINT32 *)((ULONG)&addr))
+#define READ16(addr) (*(volatile UINT16 *)((ULONG)&addr))
+#define READ8(addr) (*(volatile UINT8 *)((ULONG)&addr))
+
+typedef unsigned long long uint64_aligned __attribute__((aligned(8)));
+typedef signed long long int64_aligned __attribute__((aligned(8)));
+
+#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
+#define BCM_IOC_PTR(ptr_t, ptr) union { ptr_t ptr; uint64_aligned ptr##64; }
+#define BCM_IOC_PTR_ZERO_EXT(ptr) if (is_compat_task()) ((ptr##64) = (uint64_aligned)(uint32_t)(ptr##64))
+#else
+#define BCM_IOC_PTR(ptr_t, ptr) ptr_t ptr;
+#define BCM_IOC_PTR_ZERO_EXT(ptr)
+#endif
+
+/*Example usage of above types/macro to a create 32/64-bit compatible ioctl message:
+ typedef struct {
+ uint8 exByte;
+ BCM_IOC_PTR(void*, exPtr);
+ uint32 exWord; /.Never use long. Always use (u)int32./
+ uint64_aligned ex64bitValue; /.Never use long long. Always use (u)int64_aligned../
+ } ExampleIoctlMsg;
+*/
+#endif
+
+#endif
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm_map_part.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm_map_part.h
new file mode 100644
index 0000000000..85a79ba8fb
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/bcm_map_part.h
@@ -0,0 +1,69 @@
+/*
+ <:copyright-BRCM:2011:DUAL/GPL:standard
+
+ Copyright (c) 2011 Broadcom
+ All Rights Reserved
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License, version 2, as published by
+ the Free Software Foundation (the "GPL").
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+
+ A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+ writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA.
+
+ :>
+*/
+
+#ifndef __BCM_MAP_H
+#define __BCM_MAP_H
+
+#if defined (_BCM963138_)
+#include "63138_map_part.h"
+#endif
+#if defined (_BCM963148_)
+#include "63148_map_part.h"
+#endif
+#if defined (_BCM94908_)
+#include "4908_map_part.h"
+#endif
+#if defined (_BCM96858_)
+#include "6858_map_part.h"
+#endif
+#if defined (_BCM947189_)
+#include "47189_map_part.h"
+#endif
+#if defined (_BCM963158_)
+#include "63158_map_part.h"
+#endif
+#if defined (_BCM96846_)
+#include "6846_map_part.h"
+#endif
+#if defined (_BCM96856_)
+#include "6856_map_part.h"
+#endif
+#if defined (_BCM963178_)
+#include "63178_map_part.h"
+#endif
+#if defined (_BCM963146_)
+#include "63146_map_part.h"
+#endif
+#if defined (_BCM947622_)
+#include "47622_map_part.h"
+#endif
+#if defined (_BCM96878_)
+#include "6878_map_part.h"
+#endif
+#if defined (_BCM94912_)
+#include "4912_map_part.h"
+#endif
+#if defined (_BCM96756_)
+#include "6756_map_part.h"
+#endif
+#endif
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/clk_rst.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/clk_rst.h
new file mode 100644
index 0000000000..be4d5bc735
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/clk_rst.h
@@ -0,0 +1,85 @@
+/*
+<:copyright-BRCM:2013:DUAL/GPL:standard
+
+ Copyright (c) 2013 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+*/
+
+#ifndef CLK_RST_H
+#define CLK_RST_H
+
+#ifndef IS_BCMCHIP
+#define IS_BCMCHIP(num) (defined(_BCM9##num##_)||defined(CONFIG_BCM9##num)||\
+ defined(CONFIG_BCM##num))
+#endif
+
+/* pll dividers */
+struct PLL_DIVIDERS {
+ unsigned int pdiv;
+ unsigned int ndiv_int;
+ unsigned int ndiv_frac;
+ unsigned int ka;
+ unsigned int ki;
+ unsigned int kp;
+};
+
+int pll_vco_freq_set(unsigned int pll_addr, struct PLL_DIVIDERS *divs);
+int pll_ch_freq_set(unsigned int pll_addr, unsigned int ch, unsigned int mdiv);
+int pll_ch_freq_get(unsigned int pll_addr, unsigned int ch, unsigned int *freq);
+int ddr_freq_set(unsigned long freq);
+int viper_freq_set(unsigned long freq);
+int rdp_freq_set(unsigned long freq);
+unsigned long get_rdp_freq(unsigned int *rdp_freq);
+#if IS_BCMCHIP(6858) || IS_BCMCHIP(6856) || IS_BCMCHIP(6878) || IS_BCMCHIP(6855)
+int pll_vco_freq_get(unsigned int pll_addr, unsigned int *fvco);
+int pll_ch_freq_vco_set(unsigned int pll_addr, unsigned int ch,
+ unsigned int mdiv, unsigned int use_vco);
+#endif
+
+#if IS_BCMCHIP(6855)
+int pll_vco_config(unsigned int pll_addr, unsigned int ndivider, unsigned int pdivider);
+#endif
+
+void set_vreg_clk(void);
+
+#if IS_BCMCHIP(6858)
+
+typedef enum {
+ BCM_CPU_CLK_HIGH,
+ BCM_CPU_CLK_LOW
+} BCM_CPU_CLK;
+
+int bcm_change_cpu_clk(BCM_CPU_CLK clock);
+
+#endif
+
+#if IS_BCMCHIP(6858) || IS_BCMCHIP(6855)
+#define XRDPPLL_RUNNER_CHANNEL 0
+#endif
+#if IS_BCMCHIP(6856) || IS_BCMCHIP(6846)
+#define XRDPPLL_RUNNER_CHANNEL 1
+#endif
+#if IS_BCMCHIP(6878)
+#define SYSPLL_RUNNER_CHANNEL 0
+#endif
+#if IS_BCMCHIP(63158)
+/* TBD. Verify value. */
+#define XRDPPLL_RUNNER_CHANNEL 1
+#endif
+#endif /* #ifndef CLK_RST_H */
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/command.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/command.h
new file mode 100644
index 0000000000..4c254937bf
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/command.h
@@ -0,0 +1,307 @@
+/*
+<:copyright-BRCM:2013:DUAL/GPL:standard
+
+ Copyright (c) 2013 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+*/
+
+#ifndef PMCCOMMAND_H
+#define PMCCOMMAND_H
+
+#include "pmc_drv.h"
+
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t cmdID:8;
+ uint32_t error:8;
+ uint32_t msgID:8;
+ uint32_t srcPort:8;
+#else
+ uint32_t srcPort:8;
+ uint32_t msgID:8;
+ uint32_t error:8;
+ uint32_t cmdID:8;
+#endif
+ } Bits;
+ uint32_t Reg32;
+} TCommandWord0;
+
+#ifdef PMC_IMPL_3_X
+typedef union {
+ struct {
+ uint32_t devAddr:16; // [15:00] bus in upper nibble (only values of 0-7 are allowed), device address in lower 12 bits (4096 devices = 0..4095)
+ uint32_t zoneIdx:10; // [25:16] maximum 1023 registers/zone (0..1022)
+ uint32_t island:4; // [27:26] maximum 15 power islands (0..15) (island 15 = ALL islands!
+ uint32_t reserved:2; // [31:28]
+ } Bits;
+ uint32_t Reg32;
+} TCommandWord1;
+#else
+typedef union {
+ struct {
+#ifdef PMC_LITTLE_ENDIAN
+ uint32_t zoneIdx:10;
+ uint32_t devAddr:10;
+ uint32_t island:4;
+ uint32_t logNum:8;
+#else
+ uint32_t logNum:8;
+ uint32_t island:4;
+ uint32_t devAddr:10;
+ uint32_t zoneIdx:10;
+#endif
+ } Bits;
+ uint32_t Reg32;
+} TCommandWord1;
+#endif
+
+// Ping, GetNextLogEntry, GetRMON and Sigma
+typedef struct {
+ uint32_t unused[2];
+} TCommandNoParams;
+
+typedef struct {
+ uint32_t params[2];
+} TCommandGenericParams;
+
+// PowerZoneOnOff, SetRunState, SetPowerState
+typedef struct {
+#if defined(PMC_LITTLE_ENDIAN) && defined(PMC_CPU_BIG_ENDIAN)
+ uint8_t reserved[3];
+ uint8_t state;
+#else
+ uint8_t state;
+ uint8_t reserved[3];
+#endif
+ uint32_t unused;
+} TCommandStateOnly;
+
+// PowerDevOnOff
+typedef struct {
+#if defined(PMC_LITTLE_ENDIAN) && defined(PMC_CPU_BIG_ENDIAN)
+ uint8_t reserved[2];
+ uint8_t restore;
+ uint8_t state;
+#else
+ uint8_t state;
+ uint8_t restore;
+ uint8_t reserved[2];
+#endif
+ uint32_t unused;
+} TCommandPowerDevice;
+
+// PowerOffIsland
+typedef struct {
+#if defined(PMC_LITTLE_ENDIAN) && defined(PMC_CPU_BIG_ENDIAN)
+ uint8_t reserved[3];
+ uint8_t restore;
+#else
+ uint8_t restore;
+ uint8_t reserved[3];
+#endif
+ uint32_t unused;
+} TCommandPowerIsland;
+
+// SetClockLowGear, SetClockHighGear
+typedef struct {
+#if defined(PMC_LITTLE_ENDIAN) && defined(PMC_CPU_BIG_ENDIAN)
+ uint8_t reserved[3];
+ uint8_t clkN;
+#else
+ uint8_t clkN;
+ uint8_t reserved[3];
+#endif
+ uint32_t unused;
+} TCommandSetClockN;
+
+// SetClockGear
+typedef struct {
+#if defined(PMC_LITTLE_ENDIAN) && defined(PMC_CPU_BIG_ENDIAN)
+ uint8_t reserved[3];
+ uint8_t gear;
+#else
+ uint8_t gear;
+ uint8_t reserved[3];
+#endif
+ uint32_t unused;
+} TCommandSetClockGear;
+
+typedef struct {
+#if defined(PMC_LITTLE_ENDIAN) && defined(PMC_CPU_BIG_ENDIAN)
+ uint8_t unused1;
+ uint8_t numTokens;
+ uint8_t tokenSize;
+ uint8_t queueNumber;
+ uint16_t unused2;
+ uint8_t high_watermark;
+ uint8_t low_watermark;
+#else
+ uint8_t queueNumber;
+ uint8_t tokenSize;
+ uint8_t numTokens;
+ uint8_t unused1;
+ uint8_t low_watermark;
+ uint8_t high_watermark;
+ uint16_t unused2;
+#endif
+} TCommandAllocDQM;
+
+typedef struct {
+ uint32_t phy_src_addr;
+ uint32_t dest_addr; // lower 8 bits **may** be log2 window size
+} TCommandJumpApp;
+
+typedef struct {
+#if defined(PMC_IMPL_3_X) || IS_BCMCHIP(63158)
+ union {
+ uint32_t word2;
+ struct {
+ uint16_t margin_mv_slow;
+ uint16_t maximum_mv;
+ };
+ };
+ union {
+ uint32_t word3;
+ struct {
+ uint16_t margin_mv_fast;
+ uint16_t minimum_mv;
+ };
+ };
+#else
+ uint32_t margin_mv_slow;
+ uint32_t margin_mv_fast;
+#endif
+} TCommandCloseAVS;
+
+typedef struct {
+ uint32_t word2;
+ uint32_t word3;
+} TCommandResponse;
+
+typedef struct {
+ TCommandWord0 word0;
+ TCommandWord1 word1;
+ union {
+ TCommandNoParams cmdNoParams;
+ TCommandGenericParams cmdGenericParams;
+ TCommandStateOnly cmdStateOnlyParam;
+ TCommandPowerDevice cmdPowerDevice;
+ TCommandPowerIsland cmdPowerIsland;
+ TCommandSetClockN cmdSetClockN;
+ TCommandSetClockGear cmdSetClockGear;
+ TCommandAllocDQM cmdAllocDqm;
+ TCommandJumpApp cmdJumpApp;
+ TCommandCloseAVS cmdCloseAVS;
+ TCommandResponse cmdResponse;
+ } u;
+} TCommand;
+
+// special values to select all devices/zones
+#define ALL_DEVICES 0x3ff
+#define ALL_ZONES 0x3ff
+
+// used in validate caller to prevent/allow restrictions on island, device and/or zone
+#define ANY_ISLAND 998
+#define ANY_DEVICE 1024
+#define ANY_ZONE 1024
+#define NO_ISLAND 999
+#define NO_DEVICE 1025
+#define NO_ZONE 1025
+
+// error codes
+enum {
+ NO_ERROR = 0,
+ INVALID_ISLAND,
+ INVALID_DEVICE,
+ INVALID_ZONE,
+ INVALID_STATE,
+ INVALID_COMMAND,
+ LOG_EMPTY,
+ INVALID_PARAM,
+ BPCM_READ_TIMEOUT,
+ INVALID_BUS,
+ INVALID_QUEUE_NUMBER,
+ QUEUE_NOT_AVAILABLE,
+ INVALID_TOKEN_SIZE,
+ INVALID_WATERMARKS,
+ INSUFFIENT_QSM_MEMORY_AVAILABLE,
+ INVALID_BOOT_COMMAND,
+ BPCM_WRITE_TIMEOUT,
+ CMD_TABLE_FULL,
+ CMD_TABLE_LOCKED,
+};
+
+// command codes
+enum {
+ // low-level commands
+ cmdReserved = 0,
+ cmdGetDevPresence,
+ cmdGetSWStrap,
+ cmdGetHWRev,
+ cmdGetNumZones,
+ cmdPing,
+ cmdGetNextLogEntry,
+ cmdGetRMON,
+ cmdSetClockHighGear,
+ cmdSetClockLowGear,
+ cmdSetClockGear,
+ cmdReadBpcmReg,
+ cmdReadZoneReg,
+ cmdWriteBpcmReg,
+ cmdWriteZoneReg,
+ // general-purpose high-level commands
+ cmdSetRunState,
+ cmdSetPowerState,
+ cmdShutdownAllowed,
+ cmdGetSelect0,
+ cmdGetSelect3,
+ cmdGetAvsDisableState,
+ cmdGetPVT,
+ // specific-purpose high-level commands
+ cmdPowerDevOnOff,
+ cmdPowerZoneOnOff,
+ cmdResetDevice,
+ cmdResetZone,
+ cmdAllocateG2UDQM,
+ cmdQSMAvailable,
+ cmdRevision,
+ cmdRegisterCmdHandler,
+ cmdFindUnusedCommand,
+ cmdLockCmdTable,
+ cmdJumpApp,
+ cmdStall,
+ cmdCloseAVS,
+ cmdReadROs,
+ cmdGetTrackTemp,
+ cmdSetTrackTemp,
+#ifdef PMC_IMPL_3_X
+ cmdGetIslandStatus,
+ cmdGetTMON,
+ cmdSetTemperatureThresholds,
+ cmdResetTemperatureWarning,
+#endif
+};
+
+extern void ProcessCommand(TCommand * cmd, TCommand * response);
+extern int SendCommand(int cmdID, int devAddr, int zone, int island, uint32_t word2,
+ uint32_t word3, TCommand *rsp);
+
+
+#endif // PMCCOMMAND_H
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/plat_macros.S b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/plat_macros.S
new file mode 100644
index 0000000000..93cded2b89
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/plat_macros.S
@@ -0,0 +1,26 @@
+/*
+ * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#ifndef __PLAT_MACROS_S__
+#define __PLAT_MACROS_S__
+
+#include <arm_macros.S>
+#include <platform_def.h>
+
+ /* ---------------------------------------------
+ * The below required platform porting macro
+ * prints out relevant GIC and CCI registers
+ * whenever an unhandled exception is taken in
+ * BL31.
+ * Clobbers: x0 - x10, x16, x17, sp
+ * ---------------------------------------------
+ */
+ .macro plat_crash_print_regs
+ mov_imm x17, GICC_BASE
+ mov_imm x16, GICD_BASE
+ arm_print_gic_regs
+ .endm
+
+#endif /* __PLAT_MACROS_S__ */
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/platform_def.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/platform_def.h
new file mode 100644
index 0000000000..2509e82203
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/platform_def.h
@@ -0,0 +1,339 @@
+/*
+ * Copyright (c) 2015-2016, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __PLATFORM_DEF_H__
+#define __PLATFORM_DEF_H__
+
+/* Following two defines needed to makes use of shared PMC driver code */
+#define _CFE_
+#define _ATF_
+
+#include <arch.h>
+#include <common_def.h>
+#include <tbbr_img_def.h>
+#include <bcm_map_part.h>
+#include <bcm_mem_reserve.h>
+
+#define PLAT_ARM_NS_IMAGE_BASE 0x0
+
+#define PLATFORM_STACK_SIZE 0x1000
+
+#define PLATFORM_MAX_CPUS_PER_CLUSTER 4
+#define PLATFORM_CLUSTER_COUNT 1
+#define PLATFORM_CLUSTER0_CORE_COUNT PLATFORM_MAX_CPUS_PER_CLUSTER
+#define PLATFORM_CLUSTER1_CORE_COUNT 0
+#define PLATFORM_CORE_COUNT (PLATFORM_CLUSTER0_CORE_COUNT + \
+ PLATFORM_CLUSTER1_CORE_COUNT)
+
+#define BRCM_PRIMARY_CPU 0
+
+#define PLAT_NUM_PWR_DOMAINS (PLATFORM_CLUSTER_COUNT + \
+ PLATFORM_CORE_COUNT)
+#define PLAT_MAX_PWR_LVL MPIDR_AFFLVL1
+
+#define PLAT_MAX_RET_STATE 1
+#define PLAT_MAX_OFF_STATE 2
+
+/* Local power state for power domains in Run state. */
+#define PLAT_LOCAL_STATE_RUN 0
+/* Local power state for retention. Valid only for CPU power domains */
+#define PLAT_LOCAL_STATE_RET 1
+/*
+ * Local power state for OFF/power-down. Valid for CPU and cluster power
+ * domains.
+ */
+#define PLAT_LOCAL_STATE_OFF 2
+
+/*
+ * Macros used to parse state information from State-ID if it is using the
+ * recommended encoding for State-ID.
+ */
+#define PLAT_LOCAL_PSTATE_WIDTH 4
+#define PLAT_LOCAL_PSTATE_MASK ((1 << PLAT_LOCAL_PSTATE_WIDTH) - 1)
+
+/*
+ * Some data must be aligned on the biggest cache line size in the platform.
+ * This is known only to the platform as it might have a combination of
+ * integrated and external caches.
+ */
+#define CACHE_WRITEBACK_SHIFT 6
+#define CACHE_WRITEBACK_GRANULE (1 << CACHE_WRITEBACK_SHIFT)
+
+
+/*
+ * BL3-1 specific defines.
+ *
+ * Put BL3-1 at the top of the Trusted SRAM. BL31_BASE is calculated using the
+ * current BL3-1 debug size plus a little space for growth.
+ */
+#define BL31_BASE (CFG_ATF_AREA_ADDR)
+#define BL31_LIMIT (CFG_ATF_AREA_ADDR + CFG_ATF_AREA_SIZE)
+
+
+#define PLAT_ARM_NS_IMAGE_OFFSET (0x0)
+#define PLAT_PHY_ADDR_SPACE_SIZE (1ULL << 32)
+#define PLAT_VIRT_ADDR_SPACE_SIZE (1ULL << 32)
+
+/*
+ * BL3-2 specific defines.
+ *
+ */
+#if defined(AARCH32)
+#define BL32_BASE BL31_BASE
+#define BL32_SIZE CFG_ATF_AREA_SIZE
+#define BL32_LIMIT BL31_LIMIT
+#define BL322_BASE (CFG_OPTEE_AREA_ADDR)
+#else
+#define BL32_BASE (CFG_OPTEE_AREA_ADDR)
+#define BL32_SIZE (CFG_OPTEE_AREA_SIZE)
+#define BL32_LIMIT (CFG_OPTEE_AREA_ADDR + CFG_OPTEE_AREA_SIZE)
+#endif
+
+#define ADDR_SPACE_SIZE (1ull << 32)
+#define MAX_MMAP_REGIONS 10
+#define MAX_XLAT_TABLES 16
+#define MAX_IO_DEVICES 3
+#define MAX_IO_HANDLES 4
+
+#if defined BOOTLUT_PHYS_BASE
+#undef BOOTLUT_BASE
+#define BOOTLUT_BASE BOOTLUT_PHYS_BASE
+#else
+#define BOOTLUT_BASE 0xffff0000
+#endif
+
+#if !defined(BOOTLUT_SIZE)
+#define BOOTLUT_SIZE 0x1000
+#endif
+
+#if defined (BIUCFG_BASE)
+#undef BIUCFG_BASE
+#define BIUCFG_BASE (BIUCFG_PHYS_BASE + BIUCFG_OFFSET)
+#elif defined (BIUCTRL_BASE)
+#undef BIUCTRL_BASE
+#define BIUCTRL_BASE (URB_PHYS_BASE + URB_BIUCTRL_OFFSET)
+#define BIUCTRL_SIZE URB_SIZE
+#endif
+
+#if defined (B15_CTRL_BASE)
+#undef B15_CTRL_BASE
+#define B15_CTRL_BASE B15_CTRL_PHYS_BASE
+#define B15_CTRL_SIZE 0x3000
+#endif
+
+#undef TIMR_BASE
+#if defined (PLATFORM_FLAVOR_63158) || defined (PLATFORM_FLAVOR_63178) || defined (PLATFORM_FLAVOR_47622) || defined (PLATFORM_FLAVOR_6878) || defined (PLATFORM_FLAVOR_63146) || defined (PLATFORM_FLAVOR_4912) || defined (PLATFORM_FLAVOR_6756)
+#define UART0_BASE 0xff812000
+#elif defined (PLATFORM_FLAVOR_6858) || defined (PLATFORM_FLAVOR_6856) || defined (PLATFORM_FLAVOR_4908) || defined (PLATFORM_FLAVOR_6846)
+#define UART0_BASE 0xff800000
+#elif defined (PLATFORM_FLAVOR_63138) || defined (PLATFORM_FLAVOR_63148)
+#define TIMR_BASE PERF_PHYS_BASE
+#define TIMR_SIZE 0x10000
+#define TIMR_OFFSET 0x80
+
+#undef UART0_BASE
+/* 63138 and 63148 do not support PL011 UART.
+ UART is needed only for debug print.
+ For now, just use JTAG to debug these platforms.
+*/
+#define UART0_BASE 0x0
+#endif
+#define UART0_SIZE 0x1000
+#define UART0_CLK_IN_HZ (50 * 1000 * 1000)
+
+
+#undef PMC_BASE
+#if defined (PMC_OFFSET)
+#define PMC_BASE (PMC_PHYS_BASE + PMC_OFFSET)
+#else
+#define PMC_BASE (PMC_PHYS_BASE)
+#endif
+
+#if defined(PROC_MON_BASE)
+#undef PROC_MON_BASE
+#if defined(PROC_MON_PHYS_BASE)
+#define PROC_MON_BASE (PROC_MON_PHYS_BASE)
+#else
+#define PROC_MON_BASE (PMC_PHYS_BASE + PROC_MON_OFFSET)
+#endif
+#endif
+
+#undef PMC_SIZE
+#define PMC_SIZE 0x00200000
+
+#define PLAT_BCM_CRASH_UART_BASE UART0_BASE
+#define PLAT_BCM_CRASH_UART_CLK_IN_HZ UART0_CLK_IN_HZ
+#define PLAT_BCM_CONSOLE_BAUDRATE 115200
+
+#define PLAT_ARM_CRASH_UART_BASE PLAT_BCM_CRASH_UART_BASE
+#define PLAT_ARM_CRASH_UART_CLK_IN_HZ PLAT_BCM_CRASH_UART_CLK_IN_HZ
+#define ARM_CONSOLE_BAUDRATE PLAT_BCM_CONSOLE_BAUDRATE
+
+#define DEVICE0_BASE 0x08000000
+#define DEVICE0_SIZE 0x00021000
+#define DEVICE1_BASE 0x09000000
+#define DEVICE1_SIZE 0x00011000
+
+
+#if defined(WDTIMR0_BASE)
+#undef WDTIMR0_BASE
+#define WDTIMR0_BASE (PERF_PHYS_BASE+WDTIMR0_OFFSET)
+#define WDTIMR_BASE (PERF_PHYS_BASE)
+#define WDTIMR_SIZE 0x4000
+#endif
+
+/*
+ * GIC related constants
+ */
+
+#undef GICD_BASE
+#undef GICC_BASE
+#undef SCU_BASE
+#if defined (PLATFORM_FLAVOR_63138) || defined (PLATFORM_FLAVOR_63148)
+#define GICD_BASE GICD_PHYS_BASE
+#define GICC_BASE GICC_PHYS_BASE
+#if defined (PLATFORM_FLAVOR_63138)
+#define SCU_BASE SCU_PHYS_BASE
+#endif
+#else
+#define GICD_BASE (GIC_PHYS_BASE + GICD_OFFSET)
+#define GICC_BASE (GIC_PHYS_BASE + GICC_OFFSET)
+#endif
+
+#define GICR_BASE 0
+
+
+#define BRCM_IRQ_SEC_SGI_0 8
+#define BRCM_IRQ_SEC_SGI_1 9
+#define BRCM_IRQ_SEC_SGI_2 10
+#define BRCM_IRQ_SEC_SGI_3 11
+#define BRCM_IRQ_SEC_SGI_4 12
+#define BRCM_IRQ_SEC_SGI_5 13
+#define BRCM_IRQ_SEC_SGI_6 14
+#define BRCM_IRQ_SEC_SGI_7 15
+
+#if defined (PLATFORM_FLAVOR_63138)
+#define PL310_BASE 0x8001D000
+#define PL310_MAP_SIZE 0x00002000
+
+#undef SCU_BASE
+#define SCU_BASE 0x8001E000
+#define SCU_ERRATA744369 0x30
+
+#define BIT32(nr) (1 << (nr))
+/*
+ * Outer cache iomem
+ */
+#define PL310_LINE_SIZE 32
+#define PL310_8_WAYS 8
+
+/* reg1 */
+#define PL310_CTRL 0x100
+#define PL310_AUX_CTRL 0x104
+#define PL310_TAG_RAM_CTRL 0x108
+#define PL310_DATA_RAM_CTRL 0x10C
+/* reg7 */
+#define PL310_SYNC 0x730
+#define PL310_INV_BY_WAY 0x77C
+#define PL310_CLEAN_BY_WAY 0x7BC
+#define PL310_FLUSH_BY_WAY 0x7FC
+#define PL310_INV_BY_PA 0x770
+#define PL310_CLEAN_BY_PA 0x7B0
+#define PL310_FLUSH_BY_PA 0x7F0
+#define PL310_FLUSH_BY_INDEXWAY 0x7F8
+/* reg9 */
+#define PL310_DCACHE_LOCKDOWN_BASE 0x900
+#define PL310_ICACHE_LOCKDOWN_BASE 0x904
+/* reg12 */
+#define PL310_ADDR_FILT_START 0xC00
+#define PL310_ADDR_FILT_END 0xC04
+/* reg15 */
+#define PL310_DEBUG_CTRL 0xF40
+#define PL310_PREFETCH_CTRL 0xF60
+#define PL310_POWER_CTRL 0xF80
+
+#define PL310_CTRL_ENABLE_BIT BIT32(0)
+#define PL310_AUX_16WAY_BIT BIT32(16)
+
+/*
+ * PL310 TAG RAM Control Register
+ *
+ * bit[10:8]:1 - 2 cycle of write accesses latency
+ * bit[6:4]:1 - 2 cycle of read accesses latency
+ * bit[2:0]:1 - 2 cycle of setup latency
+ */
+#ifndef PL310_TAG_RAM_CTRL_INIT
+#define PL310_TAG_RAM_CTRL_INIT 0x00000111
+#endif
+
+/*
+ * PL310 DATA RAM Control Register
+ *
+ * bit[10:8]:2 - 3 cycle of write accesses latency
+ * bit[6:4]:2 - 3 cycle of read accesses latency
+ * bit[2:0]:2 - 3 cycle of setup latency
+ */
+#ifndef PL310_DATA_RAM_CTRL_INIT
+#define PL310_DATA_RAM_CTRL_INIT 0x00000111
+#endif
+
+/*
+ * PL310 Auxiliary Control Register
+ *
+ * I/Dcache prefetch enabled (bit29:28=2b11)
+ * NS can access interrupts (bit27=1)
+ * NS can lockown cache lines (bit26=1)
+ * Pseudo-random replacement policy (bit25=0)
+ * Force write allocated (default)
+ * Shared attribute internally ignored (bit22=1, bit13=0)
+ * Parity disabled (bit21=0)
+ * Event monitor disabled (bit20=0)
+ * Platform fmavor specific way config (dual / quad):
+ * - 64kb way size (bit19:17=3b011)
+ * - 16-way associciativity (bit16=1)
+ * Platform fmavor specific way config (dual lite / solo):
+ * - 32kb way size (bit19:17=3b010)
+ * - no 16-way associciativity (bit16=0)
+ * Store buffer device limitation enabled (bit11=1)
+ * Cacheable accesses have high prio (bit10=0)
+ * Full Line Zero (FLZ) disabled (bit0=0)
+ */
+
+#define PL310_AUX_CTRL_INIT 0x4e450001
+
+/*
+ * PL310 Prefetch Control Register
+ *
+ * Double linefill disabled (bit30=0)
+ * I/D prefetch enabled (bit29:28=2b11)
+ * Prefetch drop enabled (bit24=1)
+ * Incr double linefill disable (bit23=0)
+ * Prefetch offset = 7 (bit4:0)
+ */
+#define PL310_PREFETCH_CTRL_INIT 0x31000007
+
+/*
+ * PL310 Power Register
+ *
+ * Dynamic clock gating enabled
+ * Standby mode enabled
+ */
+#define PL310_POWER_CTRL_INIT 0x00000003
+
+#define GICC_CTLR_OFFSET 0x0
+#define GICC_PMR_OFFSET 0x4
+#define GICD_CTLR_OFFSET 0x0
+#define GICD_TYPER_OFFSET 0x4
+#define GICD_IGROUPR0_OFFSET 0x80
+
+#endif
+
+/*
+ * System counter
+ */
+#define SYS_COUNTER_FREQ_IN_TICKS (50 * 1000 * 1000)
+
+#endif /* __PLATFORM_DEF_H__ */
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_47622.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_47622.h
new file mode 100644
index 0000000000..415eb8c645
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_47622.h
@@ -0,0 +1,134 @@
+/*
+<:copyright-BRCM:2019:DUAL/GPL:standard
+
+ Copyright (c) 2019 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+*/
+
+#ifndef PMC_ADDR_47622_H__
+#define PMC_ADDR_47622_H__
+
+#define PMB_BUS_ID_SHIFT 12
+
+#define PMB_BUS_PERIPH 1
+#define PMB_ADDR_PERIPH (16 | PMB_BUS_PERIPH << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PERIPH 4
+
+#define PMB_BUS_CRYPTO 0
+#define PMB_ADDR_CRYPTO (1 | PMB_BUS_CRYPTO << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_CRYPTO 1
+
+#define PMB_BUS_PVTMON 0
+#define PMB_ADDR_PVTMON (2 | PMB_BUS_PVTMON << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PVTMON 0
+
+#define PMB_BUS_CHIP_CLKRST 0
+#define PMB_ADDR_CHIP_CLKRST (3 | PMB_BUS_CHIP_CLKRST << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_CHIP_CLKRST 0
+
+#define PMB_BUS_USB31_20 0
+#define PMB_ADDR_USB31_20 (4 | PMB_BUS_USB31_20 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_USB31_20 3
+
+#define PMB_BUS_WLAN0 0
+#define PMB_ADDR_WLAN0 (5 | PMB_BUS_WLAN0 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_WLAN0 1
+
+#define PMB_BUS_WLAN0_PHY1 0
+#define PMB_ADDR_WLAN0_PHY1 (6 | PMB_BUS_WLAN0_PHY1 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_WLAN0_PHY1 1
+
+#define PMB_BUS_WLAN0_PHY2 0
+#define PMB_ADDR_WLAN0_PHY2 (7 | PMB_BUS_WLAN0_PHY2 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_WLAN0_PHY2 1
+
+#define PMB_BUS_WLAN1 0
+#define PMB_ADDR_WLAN1 (8 | PMB_BUS_WLAN1 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_WLAN1 1
+
+#define PMB_BUS_WLAN1_PHY1 0
+#define PMB_ADDR_WLAN1_PHY1 (9 | PMB_BUS_WLAN1_PHY1 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_WLAN1_PHY1 1
+
+#define PMB_BUS_WLAN1_PHY2 0
+#define PMB_ADDR_WLAN1_PHY2 (10 | PMB_BUS_WLAN1_PHY2 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_WLAN1_PHY2 1
+
+#define PMB_BUS_MEMC 0
+#define PMB_ADDR_MEMC (11 | PMB_BUS_MEMC << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_MEMC 1
+
+#define PMB_BUS_SYSP 0
+#define PMB_ADDR_SYSP (0 | PMB_BUS_SYSP << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_SYSP 3
+
+#define PMB_BUS_PCIE0 1
+#define PMB_ADDR_PCIE0 (17 | PMB_BUS_PCIE0 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE0 1
+
+#define PMB_BUS_ORION_CPU0 0
+#define PMB_ADDR_ORION_CPU0 (32 | PMB_BUS_ORION_CPU0 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_CPU0 1
+
+#define PMB_BUS_ORION_CPU1 0
+#define PMB_ADDR_ORION_CPU1 (33 | PMB_BUS_ORION_CPU1 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_CPU1 1
+
+#define PMB_BUS_ORION_CPU2 0
+#define PMB_ADDR_ORION_CPU2 (34 | PMB_BUS_ORION_CPU2 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_CPU2 1
+
+#define PMB_BUS_ORION_CPU3 0
+#define PMB_ADDR_ORION_CPU3 (35 | PMB_BUS_ORION_CPU3 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_CPU3 1
+
+#define PMB_BUS_ORION_NONCPU 0
+#define PMB_ADDR_ORION_NONCPU (36 | PMB_BUS_ORION_NONCPU << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_NONCPU 1
+
+#define PMB_BUS_BIU_PLL 0
+#define PMB_ADDR_BIU_PLL (38 | PMB_BUS_BIU_PLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_BIU_PLL 0
+
+#define PMB_BUS_BIU_BPCM 0
+#define PMB_ADDR_BIU_BPCM (39 | PMB_BUS_BIU_BPCM << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_BIU_BPCM 1
+
+#define PMB_BUS_PCM PMB_BUS_PERIPH
+#define PMB_ADDR_PCM (16 | PMB_BUS_PCM << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCM 4
+
+enum {
+ PCM_Zone_Main,
+ PCM_Zone_PCM = 3
+};
+
+//--------- SOFT Reset bits for PCM ------------------------
+#define BPCM_PCM_SRESET_PCM_N 0x00000040
+
+#define RCAL_0P25UM_HORZ 0
+#define RCAL_0P25UM_VERT 1
+#define RCAL_0P5UM_HORZ 2
+#define RCAL_0P5UM_VERT 3
+#define RCAL_1UM_HORZ 4
+#define RCAL_1UM_VERT 5
+#define PMMISC_RMON_EXT_REG ((RCAL_1UM_VERT + 1)/2)
+#define PMMISC_RMON_VALID_MASK (0x1<<16)
+
+#endif
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_4908.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_4908.h
new file mode 100644
index 0000000000..c90218bb37
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_4908.h
@@ -0,0 +1,126 @@
+/*
+<:copyright-BRCM:2019:DUAL/GPL:standard
+
+ Copyright (c) 2019 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+*/
+
+#ifndef PMC_ADDR_4908_H__
+#define PMC_ADDR_4908_H__
+
+#define PMB_BUS_MAX 2
+#define PMB_BUS_ID_SHIFT 8
+
+#define PMB_BUS_PERIPH 0
+#define PMB_ADDR_PERIPH (0 | PMB_BUS_PERIPH << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PERIPH 4
+
+#define PMB_BUS_CRYPTO 0
+#define PMB_ADDR_CRYPTO (1 | PMB_BUS_CRYPTO << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_CRYPTO 1
+
+#define PMB_BUS_PCIE2 0
+#define PMB_ADDR_PCIE2 (2 | PMB_BUS_PCIE2 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE2 1
+
+#define PMB_BUS_RDP 0
+#define PMB_ADDR_RDP (3 | PMB_BUS_RDP << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_RDP 2
+
+#define PMB_BUS_FPM 0
+#define PMB_ADDR_FPM (4 | PMB_BUS_RDP << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_FPM 1
+
+#define PMB_BUS_DQM 0
+#define PMB_ADDR_DQM (5 | PMB_BUS_RDP << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_DQM 1
+
+#define PMB_BUS_URB 0
+#define PMB_ADDR_URB (6 | PMB_BUS_URB << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_URB 1
+
+#define PMB_BUS_MEMC 0
+#define PMB_ADDR_MEMC (7 | PMB_BUS_MEMC << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_MEMC 1
+
+#define PMB_BUS_RDPPLL 0
+#define PMB_ADDR_RDPPLL (8 | PMB_BUS_RDPPLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_RDPPLL 0
+
+#define PMB_BUS_B53PLL 0
+#define PMB_ADDR_B53PLL (9 | PMB_BUS_B53PLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_B53PLL 0
+
+#define PMB_BUS_SWITCH 1
+#define PMB_ADDR_SWITCH (10 | PMB_BUS_SWITCH << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_SWITCH 3
+
+#define PMB_BUS_PCM 1
+#define PMB_ADDR_PCM (11 | PMB_BUS_PCM << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCM 2
+enum {
+ PCM_Zone_Main,
+ PCM_Zone_PCM,
+};
+//--------- SOFT Reset bits for PCM ------------------------
+#define BPCM_PCM_SRESET_HARDRST_N 0x00000004
+#define BPCM_PCM_SRESET_PCM_N 0x00000002
+#define BPCM_PCM_SRESET_200_N 0x00000001
+
+#define PMB_BUS_SGMII 1
+#define PMB_ADDR_SGMII (12 | PMB_BUS_SGMII << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_SGMII 0
+
+#define PMB_BUS_CHIP_CLKRST 1
+#define PMB_ADDR_CHIP_CLKRST (13 | PMB_BUS_CHIP_CLKRST << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_CHIP_CLKRST 0
+
+#define PMB_BUS_PCIE0 1
+#define PMB_ADDR_PCIE0 (14 | PMB_BUS_PCIE0 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE0 1
+
+#define PMB_BUS_PCIE1 1
+#define PMB_ADDR_PCIE1 (15 | PMB_BUS_PCIE1 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE1 1
+
+#define PMB_BUS_SATA 1
+#define PMB_ADDR_SATA (16 | PMB_BUS_SATA << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_SATA 1
+
+#define PMB_BUS_USB 1
+#define PMB_ADDR_USB30_2X (17 | PMB_BUS_USB << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_USB 4
+
+#define PMB_BUS_SYSPLL 1
+#define PMB_ADDR_SYSPLL (18 | PMB_BUS_SYSPLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_SYSPLL 0
+
+#define PMB_BUS_SWTPLL 1
+#define PMB_ADDR_SWTPLL (19 | PMB_BUS_SWTPLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_SWTPLL 0
+
+#define PMB_BUS_I2SPLL 1
+#define PMB_ADDR_I2SPLL (20 | PMB_BUS_I2SPLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_I2SPLL 0
+
+#define PMB_BUS_GMAC 1
+#define PMB_ADDR_GMAC (21 | PMB_BUS_GMAC << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_GMAC 1
+
+#endif
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_4912.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_4912.h
new file mode 100755
index 0000000000..11eda63433
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_4912.h
@@ -0,0 +1,188 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+/*
+<:copyright-BRCM:2019:DUAL/GPL:standard
+
+ Copyright (c) 2019 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+*/
+
+#ifndef _4912_PMC_ADDR_H
+#define _4912_PMC_ADDR_H
+
+#define PMB_BUS_MAX 2
+#define PMB_BUS_ID_SHIFT 12
+
+#define PMB_BUS_PERIPH 0
+#define PMB_ADDR_PERIPH (0 | PMB_BUS_PERIPH << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PERIPH 4
+
+#define PMB_BUS_CHIP_CLKRST 0
+#define PMB_ADDR_CHIP_CLKRST (1 | PMB_BUS_CHIP_CLKRST << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_CHIP_CLKRST 0
+
+#define PMB_BUS_PVTMON 1
+#define PMB_ADDR_PVTMON (3 | PMB_BUS_PVTMON << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PVTMON 0
+
+#define PMB_BUS_CRYPTO 1
+#define PMB_ADDR_CRYPTO (4 | PMB_BUS_CRYPTO << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_CRYPTO 0
+
+#define PMB_BUS_USB30_2X 0
+#define PMB_ADDR_USB30_2X (5 | PMB_BUS_USB30_2X << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_USB30_2X 4
+
+#define PMB_BUS_PCIE1 1
+#define PMB_ADDR_PCIE1 (6 | PMB_BUS_PCIE1 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE1 4
+
+// referring to PCIEG3
+#define PMB_BUS_PCIE3 1
+#define PMB_ADDR_PCIE3 (7 | PMB_BUS_PCIE3 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE3 1
+
+#define PMB_BUS_MEMC 1
+#define PMB_ADDR_MEMC (8 | PMB_BUS_MEMC << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_MEMC 1
+
+#define PMB_BUS_XRDP 1
+#define PMB_ADDR_XRDP (9 | PMB_BUS_XRDP << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_XRDP 1
+
+#define PMB_BUS_PCIE2 1
+#define PMB_ADDR_PCIE2 (11 | PMB_BUS_PCIE2 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE2 1
+
+#define PMB_BUS_PCIE0 0
+#define PMB_ADDR_PCIE0 (12 | PMB_BUS_PCIE0 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE0 1
+
+#define PMB_BUS_ETH 1
+#define PMB_ADDR_ETH (13 | PMB_BUS_ETH << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ETH 1
+
+#define PMB_BUS_MPM 1
+#define PMB_ADDR_MPM (14 | PMB_BUS_MPM << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_MPM 1
+
+#define PMB_BUS_XRDPPLL 0
+#define PMB_ADDR_XRDPPLL (15 | PMB_BUS_XRDPPLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_XRDPPLL 0
+
+#define PMB_BUS_PERIPH_ARS 0
+#define PMB_ADDR_PERIPH_ARS (16 | PMB_BUS_PERIPH_ARS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PERIPH_ARS 0
+
+#define PMB_BUS_PCIE0_UBUS_ARS 0
+#define PMB_ADDR_PCIE0_UBUS_ARS (17 | PMB_BUS_PCIE0_UBUS_ARS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE0_UBUS_ARS 0
+
+#define PMB_BUS_USB30_2X_ARS 0
+#define PMB_ADDR_USB30_2X_ARS (18 | PMB_BUS_USB30_2X_ARS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_USB30_2X_ARS 0
+
+#define PMB_BUS_SYS_ARS 0
+#define PMB_ADDR_SYS_ARS (19 | PMB_BUS_SYS_ARS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_SYS_ARS 0
+
+#define PMB_BUS_CRYPTO2_ARS 1
+#define PMB_ADDR_CRYPTO2_ARS (20 | PMB_BUS_CRYPTO2_ARS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_CRYPTO2_ARS 0
+
+#define PMB_BUS_XRDP_ARS 1
+#define PMB_ADDR_XRDP_ARS (21 | PMB_BUS_XRDP_ARS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_XRDP_ARS 0
+
+#define PMB_BUS_MPM_ARS 1
+#define PMB_ADDR_MPM_ARS (22 | PMB_BUS_MPM_ARS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_MPM_ARS 0
+
+#define PMB_BUS_MEMC_ARS 1
+#define PMB_ADDR_MEMC_ARS (23 | PMB_BUS_MEMC_ARS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_MEMC_ARS 0
+
+#define PMB_BUS_ETH_ARS 1
+#define PMB_ADDR_ETH_ARS (24 | PMB_BUS_ETH_ARS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ETH_ARS 0
+
+#define PMB_BUS_PCIE1_UBUS_ARS 1
+#define PMB_ADDR_PCIE1_UBUS_ARS (25 | PMB_BUS_PCIE1_UBUS_ARS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE1_UBUS_ARS 0
+
+#define PMB_BUS_PCIE3_ARS 1
+#define PMB_ADDR_PCIE3_ARS (26 | PMB_BUS_PCIE3_ARS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE3_ARS 0
+
+#define PMB_BUS_MERLIN0_UBUS_ARS 1
+#define PMB_ADDR_MERLIN0_UBUS_ARS (27 | PMB_BUS_MERLIN0_UBUS_ARS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_MERLIN0_UBUS_ARS 0
+
+#define PMB_BUS_MERLIN1_UBUS_ARS 1
+#define PMB_ADDR_MERLIN1_UBUS_ARS (28 | PMB_BUS_MERLIN1_UBUS_ARS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_MERLIN1_UBUS_ARS 0
+
+#define PMB_BUS_MERLIN2_UBUS_ARS 1
+#define PMB_ADDR_MERLIN2_UBUS_ARS (29 | PMB_BUS_MERLIN2_UBUS_ARS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_MERLIN2_UBUS_ARS 0
+
+#define PMB_BUS_ORION_PLL 1
+#define PMB_ADDR_ORION_PLL (32 | PMB_BUS_ORION_PLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_PLL 0
+#define PMB_BUS_BIU_PLL PMB_BUS_ORION_PLL
+#define PMB_ADDR_BIU_PLL PMB_ADDR_ORION_PLL
+#define PMB_ZONES_BIU_PLL PMB_ZONES_ORION_PLL
+
+#define PMB_BUS_ORION_BPCM 1
+#define PMB_ADDR_ORION_BPCM (33 | PMB_BUS_ORION_BPCM << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_BPCM 1
+#define PMB_BUS_BIU_BPCM PMB_BUS_ORION_BPCM
+#define PMB_ADDR_BIU_BPCM PMB_ADDR_ORION_BPCM
+#define PMB_ZONES_BIU_BPCM PMB_ZONES_ORION_BPCM
+
+#define PMB_BUS_ORION_CPU0 1
+#define PMB_ADDR_ORION_CPU0 (34 | PMB_BUS_ORION_CPU0 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_CPU0 1
+
+#define PMB_BUS_ORION_CPU1 1
+#define PMB_ADDR_ORION_CPU1 (35 | PMB_BUS_ORION_CPU1 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_CPU1 1
+
+#define PMB_BUS_ORION_CPU2 1
+#define PMB_ADDR_ORION_CPU2 (36 | PMB_BUS_ORION_CPU2 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_CPU2 1
+
+#define PMB_BUS_ORION_CPU3 1
+#define PMB_ADDR_ORION_CPU3 (37 | PMB_BUS_ORION_CPU3 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_CPU3 1
+
+#define PMB_BUS_ORION_NONCPU 1
+#define PMB_ADDR_ORION_NONCPU (38 | PMB_BUS_ORION_NONCPU << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_NONCPU 1
+
+#define PMB_BUS_ORION_ARS 1
+#define PMB_ADDR_ORION_ARS (39 | PMB_BUS_ORION_ARS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_ARS 0
+
+#define PMB_BUS_ORION_ACEBIU_ARS 1
+#define PMB_ADDR_ORION_ACEBIU_ARS (40 | PMB_BUS_ORION_ACEBIU_ARS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_ACEBIU_ARS 0
+#endif
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_63138.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_63138.h
new file mode 100644
index 0000000000..2e5cfa2623
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_63138.h
@@ -0,0 +1,218 @@
+/*
+<:copyright-BRCM:2019:DUAL/GPL:standard
+
+ Copyright (c) 2019 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+*/
+
+#ifndef PMC_ADDR_63138_H__
+#define PMC_ADDR_63138_H__
+
+#define PMB_BUS_MAX 2
+#define PMB_BUS_ID_SHIFT 8
+
+#define PMB_BUS_APM 1
+#define PMB_ADDR_APM (0 | PMB_BUS_APM << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_APM 5
+
+//--------- SOFT Reset bits for APM ------------------------
+#define BPCM_APM_SRESET_HARDRST_N 0x00000040
+#define BPCM_APM_SRESET_AUDIO_N 0x00000020
+#define BPCM_APM_SRESET_PCM_N 0x00000010
+#define BPCM_APM_SRESET_HVGA_N 0x00000008
+#define BPCM_APM_SRESET_HVGB_N 0x00000004
+#define BPCM_APM_SRESET_BMU_N 0x00000002
+#define BPCM_APM_SRESET_200_N 0x00000001
+
+#define PMB_BUS_SWITCH 1
+#define PMB_ADDR_SWITCH (1 | PMB_BUS_SWITCH << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_SWITCH 3
+
+#define PMB_BUS_CHIP_CLKRST 1
+#define PMB_ADDR_CHIP_CLKRST (2 | PMB_BUS_CHIP_CLKRST << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_CHIP_CLKRST 0
+
+#define PMB_BUS_SATA 0
+#define PMB_ADDR_SATA (3 | PMB_BUS_SATA << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_SATA 1
+
+#define PMB_BUS_AIP 0
+#define PMB_ADDR_AIP (4 | PMB_BUS_AIP << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_AIP 1
+
+#define PMB_BUS_DECT_UBUS 0
+#define PMB_ADDR_DECT_UBUS (5 | PMB_BUS_DECT_UBUS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_DECT_UBUS 1
+
+#define PMB_BUS_SAR 1
+#define PMB_ADDR_SAR (6 | PMB_BUS_SAR << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_SAR 1
+
+#define PMB_BUS_RDP 1
+#define PMB_ADDR_RDP (7 | PMB_BUS_RDP << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_RDP 2
+
+#define PMB_BUS_MEMC 0
+#define PMB_ADDR_MEMC (8 | PMB_BUS_MEMC << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_MEMC 1
+
+#define PMB_BUS_PERIPH 0
+#define PMB_ADDR_PERIPH (9 | PMB_BUS_PERIPH << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PERIPH 3
+
+#define PMB_BUS_SYSPLL 1
+#define PMB_ADDR_SYSPLL (10 | PMB_BUS_SYSPLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_SYSPLL 0
+
+#define PMB_BUS_RDPPLL 1
+#define PMB_ADDR_RDPPLL (11 | PMB_BUS_RDPPLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_RDPPLL 0
+
+#define PMB_BUS_SYSPLL2 0
+#define PMB_ADDR_SYSPLL2 (12 | PMB_BUS_SYSPLL2 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_SYSPLL2 0
+
+#define PMB_BUS_SYSPLL3 0
+#define PMB_ADDR_SYSPLL3 (13 | PMB_BUS_SYSPLL3 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_SYSPLL3 0
+
+#define PMB_BUS_SYSPLL4 0
+#define PMB_ADDR_SYSPLL4 (14 | PMB_BUS_SYSPLL4 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_SYSPLL4 0
+
+#define PMB_BUS_PCIE0 0
+#define PMB_ADDR_PCIE0 (15 | PMB_BUS_PCIE0 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE0 1
+
+#define PMB_BUS_PCIE1 0
+#define PMB_ADDR_PCIE1 (16 | PMB_BUS_PCIE1 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE1 1
+
+#define PMB_BUS_USB30_2X 1
+#define PMB_ADDR_USB30_2X (17 | PMB_BUS_USB30_2X << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_USB30_2X 4
+
+#define PMB_BUS_PSAB 0
+#define PMB_ADDR_PSAB (18 | PMB_BUS_PSAB << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PSAB 1 // not shown in spreadsheet
+
+#define PMB_BUS_PSBC 0
+#define PMB_ADDR_PSBC (19 | PMB_BUS_PSBC << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PSBC 1 // not shown in spreadsheet
+
+#define PMB_BUS_EGPHY 0
+#define PMB_ADDR_EGPHY (20 | PMB_BUS_EGPHY << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_EGPHY 1 // not shown in spreadsheet
+
+#define PMB_BUS_VDSL3_MIPS 0
+#define PMB_ADDR_VDSL3_MIPS (21 | PMB_BUS_VDSL3_MIPS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_VDSL3_MIPS 1
+
+#define PMB_BUS_VDSL3_CORE 0
+#define PMB_ADDR_VDSL3_CORE (22 | PMB_BUS_VDSL3_CORE << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_VDSL3_CORE 3
+
+#define AFEPLL_PMB_BUS_VDSL3_CORE 0
+#define AFEPLL_PMB_ADDR_VDSL3_CORE (23 | AFEPLL_PMB_BUS_VDSL3_CORE << PMB_BUS_ID_SHIFT)
+#define AFEPLL_PMB_ZONES_VDSL3_CORE 0
+
+#define UBUS_PMB_BUS_VDSL3_CORE PMB_BUS_VDSL3_CORE
+#define UBUS_PMB_ADDR_VDSL3_CORE (24 | UBUS_PMB_BUS_VDSL3_CORE << PMB_BUS_ID_SHIFT)
+#define UBUS_PMB_ZONES_VDSL3_CORE 0
+
+#define UBUS_PMB_BUS_VDSL3_MIPS PMB_BUS_VDSL3_MIPS
+#define UBUS_PMB_ADDR_VDSL3_MIPS (25 | UBUS_PMB_BUS_VDSL3_MIPS << PMB_BUS_ID_SHIFT)
+#define UBUS_PMB_ZONES_VDSL3_MIPS 0
+
+#define UBUS_PMB_BUS_DECT PMB_BUS_DECT_UBUS
+#define UBUS_PMB_ADDR_DECT (26 | UBUS_PMB_BUS_DECT << PMB_BUS_ID_SHIFT)
+#define UBUS_PMB_ZONES_DECT 0
+
+#define UBUS_PMB_BUS_ARM PMB_BUS_AIP
+#define UBUS_PMB_ADDR_ARM (27 | UBUS_PMB_BUS_ARM << PMB_BUS_ID_SHIFT)
+#define UBUS_PMB_ZONES_ARM 0
+
+#define UBUS_PMB_BUS_DAP PMB_BUS_AIP
+#define UBUS_PMB_ADDR_DAP (28 | UBUS_PMB_BUS_DAP << PMB_BUS_ID_SHIFT)
+#define UBUS_PMB_ZONES_DAP 0
+
+#define UBUS_CFG0_PMB_BUS_SAR PMB_BUS_SAR
+#define UBUS_CFG0_PMB_ADDR_SAR (29 | UBUS_CFG0_PMB_BUS_SAR << PMB_BUS_ID_SHIFT)
+#define UBUS_CFG0_PMB_ZONES_SAR 0
+
+#define UBUS_CFG1_PMB_BUS_SAR PMB_BUS_SAR
+#define UBUS_CFG1_PMB_ADDR_SAR (30 | UBUS_CFG1_PMB_BUS_SAR << PMB_BUS_ID_SHIFT)
+#define UBUS_CFG1_PMB_ZONES_SAR 0
+
+#define UBUS_CFG_PMB_BUS_DBR PMB_BUS_RDP
+#define UBUS_CFG_PMB_ADDR_DBR (31 | UBUS_CFG_PMB_BUS_DBR << PMB_BUS_ID_SHIFT)
+#define UBUS_CFG_PMB_ZONES_DBR 0
+
+#define UBUS_CFG_PMB_BUS_RABR PMB_BUS_RDP
+#define UBUS_CFG_PMB_ADDR_RABR (32 | UBUS_CFG_PMB_BUS_RABR << PMB_BUS_ID_SHIFT)
+#define UBUS_CFG_PMB_ZONES_RABR 0
+
+#define UBUS_CFG_PMB_BUS_RBBR PMB_BUS_RDP
+#define UBUS_CFG_PMB_ADDR_RBBR (33 | UBUS_CFG_PMB_BUS_RBBR << PMB_BUS_ID_SHIFT)
+#define UBUS_CFG_PMB_ZONES_RBBR 0
+
+#define UBUS_CFG_PMB_BUS_APM PMB_BUS_APM
+#define UBUS_CFG_PMB_ADDR_APM (34 | UBUS_CFG_PMB_BUS_APM << PMB_BUS_ID_SHIFT)
+#define UBUS_CFG_PMB_ZONES_APM 0
+
+#define UBUS_CFG_PMB_BUS_PCIE0 PMB_BUS_PCIE0
+#define UBUS_CFG_PMB_ADDR_PCIE0 (35 | UBUS_CFG_PMB_BUS_PCIE0 << PMB_BUS_ID_SHIFT)
+#define UBUS_CFG_PMB_ZONES_PCIE0 0
+
+#define UBUS_CFG_PMB_BUS_PCIE1 PMB_BUS_PCIE1
+#define UBUS_CFG_PMB_ADDR_PCIE1 (36 | UBUS_CFG_PMB_BUS_PCIE1 << PMB_BUS_ID_SHIFT)
+#define UBUS_CFG_PMB_ZONES_PCIE1 0
+
+#define UBUS_CFG_PMB_BUS_USBH PMB_BUS_USB30_2X
+#define UBUS_CFG_PMB_ADDR_USBH (37 | UBUS_CFG_PMB_BUS_USBH << PMB_BUS_ID_SHIFT)
+#define UBUS_CFG_PMB_ZONES_USBH 0
+
+#define UBUS_CFG_PMB_BUS_USBD PMB_BUS_USB30_2X
+#define UBUS_CFG_PMB_ADDR_USBD (38 | UBUS_CFG_PMB_BUS_USBD << PMB_BUS_ID_SHIFT)
+#define UBUS_CFG_PMB_ZONES_USBD 0
+
+#define UBUS_CFG_PMB_BUS_SWITCH PMB_BUS_SWITCH
+#define UBUS_CFG_PMB_ADDR_SWITCH (39 | UBUS_CFG_PMB_BUS_SWITCH << PMB_BUS_ID_SHIFT)
+#define UBUS_CFG_PMB_ZONES_SWITCH 0
+
+#define UBUS_CFG_PMB_BUS_PERIPH PMB_BUS_PERIPH
+#define UBUS_CFG_PMB_ADDR_PERIPH (40 | UBUS_CFG_PMB_BUS_PERIPH << PMB_BUS_ID_SHIFT)
+#define UBUS_CFG_PMB_ZONES_PERIPH 0
+
+#define UBUS_CFG_PMB_BUS_SATA PMB_BUS_SATA
+#define UBUS_CFG_PMB_ADDR_SATA (41 | UBUS_CFG_PMB_BUS_SATA << PMB_BUS_ID_SHIFT)
+#define UBUS_CFG_PMB_ZONES_SATA 0
+
+/* define Zone enum for each block here */
+#ifndef _LANGUAGE_ASSEMBLY
+enum {
+ APM_Zone_Main,
+ APM_Zone_Audio,
+ APM_Zone_PCM,
+ APM_Zone_HVG,
+ APM_Zone_BMU,
+};
+#endif
+
+#endif
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_63146.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_63146.h
new file mode 100644
index 0000000000..20de9da087
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_63146.h
@@ -0,0 +1,122 @@
+/*
+<:copyright-BRCM:2019:DUAL/GPL:standard
+
+ Copyright (c) 2019 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+*/
+
+#ifndef PMC_ADDR_63146_H__
+#define PMC_ADDR_63146_H__
+
+/* FIXME! only fill those that I found from RTL */
+#define PMB_BUS_MAX 2
+#define PMB_BUS_ID_SHIFT 12
+
+#define PMB_BUS_PCIE0 0
+#define PMB_ADDR_PCIE0 (0 | PMB_BUS_PCIE0 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE0 1
+
+#define PMB_BUS_VDSL3_CORE 0
+#define PMB_ADDR_VDSL3_CORE (1 | PMB_BUS_VDSL3_CORE << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_VDSL3_CORE 1
+
+#define PMB_BUS_EGPHY 0
+#define PMB_ADDR_EGPHY (2 | PMB_BUS_EGPHY << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_EGPHY 1 // not shown in spreadsheet
+
+#define PMB_BUS_XRDP 0
+#define PMB_ADDR_XRDP (3 | PMB_BUS_XRDP << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_XRDP 3
+
+#define PMB_BUS_USB30_2X 0
+#define PMB_ADDR_USB30_2X (4 | PMB_BUS_USB30_2X << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_USB30_2X 4
+
+#define PMB_BUS_MEMC 0
+#define PMB_ADDR_MEMC (5 | PMB_BUS_MEMC << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_MEMC 1
+
+#define PMB_BUS_PVTMON 0
+#define PMB_ADDR_PVTMON (6 | PMB_BUS_PVTMON << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PVTMON 0
+
+#define PMB_BUS_PCIE1 0
+#define PMB_ADDR_PCIE1 (7 | PMB_BUS_PCIE1 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE1 1
+
+#define PMB_BUS_PCIE2 0
+#define PMB_ADDR_PCIE2 (8 | PMB_BUS_PCIE2 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE2 1
+
+#define PMB_BUS_PERIPH 1
+#define PMB_ADDR_PERIPH (9 | PMB_BUS_PERIPH << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PERIPH 4
+
+#define PMB_BUS_VDSL3_PMD 1
+#define PMB_ADDR_VDSL3_PMD (10 | PMB_BUS_VDSL3_PMD << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_VDSL3_PMD 1
+
+//--------- DGASP related bits/Offsets ------------------------
+#define BPCM_PHY_CNTL_OVERRIDE 0x00000002
+#define BPCM_PHY_CNTL_AFE_PWRDWN 0x00000001
+#define PMB_ADDR_VDSL_DGASP_PMD PMB_ADDR_VDSL3_PMD
+#define BPCM_VDSL_PHY_CTL_REG vdsl_afe_config1 // Alias for register containing DGASP override inside the VDSL PMD
+#define BPCM_VDSL_AFE_CTL_REG vdsl_afe_config0 // Alias for register containing DGASP configuration inside the VDSL PMD
+
+#define PMB_BUS_AFEPLL 1
+#define PMB_ADDR_AFEPLL (11 | PMB_BUS_AFEPLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_AFEPLL 1
+
+#define AFEPLL_PMB_BUS_VDSL3_CORE PMB_BUS_AFEPLL
+#define AFEPLL_PMB_ADDR_VDSL3_CORE PMB_ADDR_AFEPLL
+#define AFEPLL_PMB_ZONES_VDSL3_CORE PMB_ZONES_AFEPLL
+
+#define PMB_BUS_CHIP_CLKRST 1
+#define PMB_ADDR_CHIP_CLKRST (12 | PMB_BUS_CHIP_CLKRST << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_CHIP_CLKRST 0
+
+#define PMB_BUS_RDPPLL 1
+#define PMB_ADDR_RDPPLL (13 | PMB_BUS_RDPPLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_RDPPLL 0
+
+#define PMB_BUS_BIU_PLL 1
+#define PMB_ADDR_BIU_PLL (32 | PMB_BUS_BIU_PLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_BIU_PLL 0
+
+#define PMB_BUS_BIU_BPCM 1
+#define PMB_ADDR_BIU_BPCM (33 | PMB_BUS_BIU_BPCM << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_BIU_BPCM 1
+
+#define PMB_BUS_ORION_CPU0 1
+#define PMB_ADDR_ORION_CPU0 (34 | PMB_BUS_ORION_CPU0 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_CPU0 1
+
+#define PMB_BUS_ORION_CPU1 1
+#define PMB_ADDR_ORION_CPU1 (35 | PMB_BUS_ORION_CPU1 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_CPU1 1
+
+#define PMB_BUS_ORION_NONCPU 1
+#define PMB_ADDR_ORION_NONCPU (38 | PMB_BUS_ORION_NONCPU << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_NONCPU 1
+
+#define PMB_BUS_ORION_ARS 1
+#define PMB_ADDR_ORION_ARS (39 | PMB_BUS_ORION_ARS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_ARS 0
+
+#endif
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_63148.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_63148.h
new file mode 100644
index 0000000000..2e262263a6
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_63148.h
@@ -0,0 +1,230 @@
+/*
+<:copyright-BRCM:2019:DUAL/GPL:standard
+
+ Copyright (c) 2019 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+*/
+
+#ifndef PMC_ADDR_63148_H__
+#define PMC_ADDR_63148_H__
+
+#define PMB_BUS_MAX 2
+#define PMB_BUS_ID_SHIFT 8
+
+#define PMB_BUS_APM 1
+#define PMB_ADDR_APM (0 | PMB_BUS_APM << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_APM 5
+
+//--------- SOFT Reset bits for APM ------------------------
+#define BPCM_APM_SRESET_HARDRST_N 0x00000040
+#define BPCM_APM_SRESET_AUDIO_N 0x00000020
+#define BPCM_APM_SRESET_PCM_N 0x00000010
+#define BPCM_APM_SRESET_HVGA_N 0x00000008
+#define BPCM_APM_SRESET_HVGB_N 0x00000004
+#define BPCM_APM_SRESET_BMU_N 0x00000002
+#define BPCM_APM_SRESET_200_N 0x00000001
+
+#define PMB_BUS_SWITCH 1
+#define PMB_ADDR_SWITCH (1 | PMB_BUS_SWITCH << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_SWITCH 3
+
+#define PMB_BUS_CHIP_CLKRST 1
+#define PMB_ADDR_CHIP_CLKRST (2 | PMB_BUS_CHIP_CLKRST << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_CHIP_CLKRST 0
+
+#define PMB_BUS_SATA 0
+#define PMB_ADDR_SATA (3 | PMB_BUS_SATA << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_SATA 1
+
+#define PMB_BUS_URB 0
+#define PMB_ADDR_URB (4 | PMB_BUS_URB << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_URB 1
+
+#define PMB_BUS_DECT_UBUS 0
+#define PMB_ADDR_DECT_UBUS (5 | PMB_BUS_DECT_UBUS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_DECT_UBUS 1
+
+#define PMB_BUS_SAR 1
+#define PMB_ADDR_SAR (6 | PMB_BUS_SAR << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_SAR 1
+
+#define PMB_BUS_RDP 1
+#define PMB_ADDR_RDP (7 | PMB_BUS_RDP << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_RDP 2
+
+#define PMB_BUS_MEMC 0
+#define PMB_ADDR_MEMC (8 | PMB_BUS_MEMC << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_MEMC 1
+
+#define PMB_BUS_PERIPH 0
+#define PMB_ADDR_PERIPH (9 | PMB_BUS_PERIPH << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PERIPH 1
+
+#define PMB_BUS_SYSPLL 1
+#define PMB_ADDR_SYSPLL (10 | PMB_BUS_SYSPLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_SYSPLL 0
+
+#define PMB_BUS_RDPPLL 1
+#define PMB_ADDR_RDPPLL (11 | PMB_BUS_RDPPLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_RDPPLL 0
+
+#define PMB_BUS_B15_PLL 1
+#define PMB_ADDR_B15_PLL (12 | PMB_BUS_B15_PLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_B15_PLL 0
+
+#define PMB_BUS_SYSPLL3 0
+#define PMB_ADDR_SYSPLL3 (13 | PMB_BUS_SYSPLL3 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_SYSPLL3 0
+
+#define PMB_BUS_SYSPLL4 0
+#define PMB_ADDR_SYSPLL4 (14 | PMB_BUS_SYSPLL4 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_SYSPLL4 0
+
+#define PMB_BUS_PCIE0 0
+#define PMB_ADDR_PCIE0 (15 | PMB_BUS_PCIE0 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE0 1
+
+#define PMB_BUS_PCIE1 0
+#define PMB_ADDR_PCIE1 (16 | PMB_BUS_PCIE1 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE1 1
+
+#define PMB_BUS_USB30_2X 1
+#define PMB_ADDR_USB30_2X (17 | PMB_BUS_USB30_2X << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_USB30_2X 4
+
+#define PMB_BUS_PSAB 0
+#define PMB_ADDR_PSAB (18 | PMB_BUS_PSAB << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PSAB 1 // not shown in spreadsheet
+
+#define PMB_BUS_PSBC 0
+#define PMB_ADDR_PSBC (19 | PMB_BUS_PSBC << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PSBC 1 // not shown in spreadsheet
+
+#define PMB_BUS_EGPHY 0
+#define PMB_ADDR_EGPHY (20 | PMB_BUS_EGPHY << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_EGPHY 1 // not shown in spreadsheet
+
+#define PMB_BUS_VDSL3_MIPS 0
+#define PMB_ADDR_VDSL3_MIPS (21 | PMB_BUS_VDSL3_MIPS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_VDSL3_MIPS 1
+
+#define PMB_BUS_VDSL3_CORE 0
+#define PMB_ADDR_VDSL3_CORE (22 | PMB_BUS_VDSL3_CORE << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_VDSL3_CORE 3
+
+#define AFEPLL_PMB_BUS_VDSL3_CORE 0
+#define AFEPLL_PMB_ADDR_VDSL3_CORE (23 | AFEPLL_PMB_BUS_VDSL3_CORE << PMB_BUS_ID_SHIFT)
+#define AFEPLL_PMB_ZONES_VDSL3_CORE 0
+
+#define UBUS_PMB_BUS_VDSL3_CORE PMB_BUS_VDSL3_CORE
+#define UBUS_PMB_ADDR_VDSL3_CORE (24 | UBUS_PMB_BUS_VDSL3_CORE << PMB_BUS_ID_SHIFT)
+#define UBUS_PMB_ZONES_VDSL3_CORE 0
+
+#define UBUS_PMB_BUS_VDSL3_MIPS PMB_BUS_VDSL3_MIPS
+#define UBUS_PMB_ADDR_VDSL3_MIPS (25 | UBUS_PMB_BUS_VDSL3_MIPS << PMB_BUS_ID_SHIFT)
+#define UBUS_PMB_ZONES_VDSL3_MIPS 0
+
+#define UBUS_PMB_BUS_DECT PMB_BUS_DECT_UBUS
+#define UBUS_PMB_ADDR_DECT (26 | UBUS_PMB_BUS_DECT << PMB_BUS_ID_SHIFT)
+#define UBUS_PMB_ZONES_DECT 0
+
+#define UBUS_PMB_BUS_ARM PMB_BUS_URB
+#define UBUS_PMB_ADDR_ARM (27 | UBUS_PMB_BUS_ARM << PMB_BUS_ID_SHIFT)
+#define UBUS_PMB_ZONES_ARM 0
+
+#define UBUS_PMB_BUS_DAP PMB_BUS_URB
+#define UBUS_PMB_ADDR_DAP (28 | UBUS_PMB_BUS_DAP << PMB_BUS_ID_SHIFT)
+#define UBUS_PMB_ZONES_DAP 0
+
+#define UBUS_CFG0_PMB_BUS_SAR PMB_BUS_SAR
+#define UBUS_CFG0_PMB_ADDR_SAR (29 | UBUS_CFG0_PMB_BUS_SAR << PMB_BUS_ID_SHIFT)
+#define UBUS_CFG0_PMB_ZONES_SAR 0
+
+#define UBUS_CFG1_PMB_BUS_SAR PMB_BUS_SAR
+#define UBUS_CFG1_PMB_ADDR_SAR (30 | UBUS_CFG1_PMB_BUS_SAR << PMB_BUS_ID_SHIFT)
+#define UBUS_CFG1_PMB_ZONES_SAR 0
+
+#define UBUS_CFG_PMB_BUS_DBR PMB_BUS_RDP
+#define UBUS_CFG_PMB_ADDR_DBR (31 | UBUS_CFG_PMB_BUS_DBR << PMB_BUS_ID_SHIFT)
+#define UBUS_CFG_PMB_ZONES_DBR 0
+
+#define UBUS_CFG_PMB_BUS_RABR PMB_BUS_RDP
+#define UBUS_CFG_PMB_ADDR_RABR (32 | UBUS_CFG_PMB_BUS_RABR << PMB_BUS_ID_SHIFT)
+#define UBUS_CFG_PMB_ZONES_RABR 0
+
+#define UBUS_CFG_PMB_BUS_RBBR PMB_BUS_RDP
+#define UBUS_CFG_PMB_ADDR_RBBR (33 | UBUS_CFG_PMB_BUS_RBBR << PMB_BUS_ID_SHIFT)
+#define UBUS_CFG_PMB_ZONES_RBBR 0
+
+#define UBUS_CFG_PMB_BUS_APM PMB_BUS_APM
+#define UBUS_CFG_PMB_ADDR_APM (34 | UBUS_CFG_PMB_BUS_APM << PMB_BUS_ID_SHIFT)
+#define UBUS_CFG_PMB_ZONES_APM 0
+
+#define UBUS_CFG_PMB_BUS_PCIE0 PMB_BUS_PCIE0
+#define UBUS_CFG_PMB_ADDR_PCIE0 (35 | UBUS_CFG_PMB_BUS_PCIE0 << PMB_BUS_ID_SHIFT)
+#define UBUS_CFG_PMB_ZONES_PCIE0 0
+
+#define UBUS_CFG_PMB_BUS_PCIE1 PMB_BUS_PCIE1
+#define UBUS_CFG_PMB_ADDR_PCIE1 (36 | UBUS_CFG_PMB_BUS_PCIE1 << PMB_BUS_ID_SHIFT)
+#define UBUS_CFG_PMB_ZONES_PCIE1 0
+
+#define UBUS_CFG_PMB_BUS_USBH PMB_BUS_USB30_2X
+#define UBUS_CFG_PMB_ADDR_USBH (37 | UBUS_CFG_PMB_BUS_USBH << PMB_BUS_ID_SHIFT)
+#define UBUS_CFG_PMB_ZONES_USBH 0
+
+#define UBUS_CFG_PMB_BUS_USBD PMB_BUS_USB30_2X
+#define UBUS_CFG_PMB_ADDR_USBD (38 | UBUS_CFG_PMB_BUS_USBD << PMB_BUS_ID_SHIFT)
+#define UBUS_CFG_PMB_ZONES_USBD 0
+
+#define UBUS_CFG_PMB_BUS_SWITCH PMB_BUS_SWITCH
+#define UBUS_CFG_PMB_ADDR_SWITCH (39 | UBUS_CFG_PMB_BUS_SWITCH << PMB_BUS_ID_SHIFT)
+#define UBUS_CFG_PMB_ZONES_SWITCH 0
+
+#define UBUS_CFG_PMB_BUS_PERIPH PMB_BUS_PERIPH
+#define UBUS_CFG_PMB_ADDR_PERIPH (40 | UBUS_CFG_PMB_BUS_PERIPH << PMB_BUS_ID_SHIFT)
+#define UBUS_CFG_PMB_ZONES_PERIPH 0
+
+#define UBUS_CFG_PMB_BUS_SATA PMB_BUS_SATA
+#define UBUS_CFG_PMB_ADDR_SATA (41 | UBUS_CFG_PMB_BUS_SATA << PMB_BUS_ID_SHIFT)
+#define UBUS_CFG_PMB_ZONES_SATA 0
+
+#define PMB_BUS_B15_CPU0 0 // can't find it yet
+#define PMB_ADDR_B15_CPU0 (42 | PMB_BUS_B15_CPU0 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_B15_CPU0 1
+
+#define PMB_BUS_B15_CPU1 0 // can't find it yet
+#define PMB_ADDR_B15_CPU1 (43 | PMB_BUS_B15_CPU1 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_B15_CPU1 1
+
+#define PMB_BUS_B15_L2 0 // can't find it yet
+#define PMB_ADDR_B15_L2 (44 | PMB_BUS_B15_L2 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_B15_L2 1
+
+/* define Zone enum for each block here */
+#ifndef _LANGUAGE_ASSEMBLY
+enum {
+ APM_Zone_Main,
+ APM_Zone_Audio,
+ APM_Zone_PCM,
+ APM_Zone_HVG,
+ APM_Zone_BMU,
+};
+#endif
+
+#endif
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_63158.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_63158.h
new file mode 100644
index 0000000000..e4bbdfb535
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_63158.h
@@ -0,0 +1,197 @@
+/*
+<:copyright-BRCM:2019:DUAL/GPL:standard
+
+ Copyright (c) 2019 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+*/
+
+#ifndef PMC_ADDR_63158_H__
+#define PMC_ADDR_63158_H__
+
+#define PMB_BUS_MAX 2
+#define PMB_BUS_ID_SHIFT 8
+
+#define PMB_BUS_PERIPH 1
+#define PMB_ADDR_PERIPH (3 | PMB_BUS_PERIPH << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PERIPH 4
+
+#define PMB_BUS_CHIP_CLKRST 0
+#define PMB_ADDR_CHIP_CLKRST (1 | PMB_BUS_CHIP_CLKRST << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_CHIP_CLKRST 0
+
+#define BPCM_CLKRST_AFE_PWRDWN 0x80000000
+
+#define PMB_BUS_SYSPLL 0
+#define PMB_ADDR_SYSPLL (4 | PMB_BUS_SYSPLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_SYSPLL 0
+
+#define PMB_BUS_RDPPLL 0
+#define PMB_ADDR_RDPPLL (6 | PMB_BUS_RDPPLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_RDPPLL 0
+
+#define PMB_BUS_UBUSPLL 0
+#define PMB_ADDR_UBUSPLL (5 | PMB_BUS_UBUSPLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_UBUSPLL 0
+
+#define PMB_BUS_MEMC 0
+#define PMB_ADDR_MEMC (2 | PMB_BUS_MEMC << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_MEMC 1
+
+#define PMB_BUS_SYNC_PLL 1
+#define PMB_ADDR_SYNC_PLL (7 | PMB_BUS_SYNC_PLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_SYNC_PLL 1
+
+#define PMB_BUS_USB30_2X 1
+#define PMB_ADDR_USB30_2X (13 | PMB_BUS_USB30_2X << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_USB30_2X 4
+
+#define PMB_BUS_WAN 1
+#define PMB_ADDR_WAN (15 | PMB_BUS_WAN << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_WAN 7
+
+#define PMB_BUS_XRDP 1
+#define PMB_ADDR_XRDP (16 | PMB_BUS_XRDP << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_XRDP 3
+
+#define PMB_BUS_PCIE0 0
+#define PMB_ADDR_PCIE0 (8 | PMB_BUS_PCIE0 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE0 1
+
+#define PMB_BUS_PCIE1 0
+#define PMB_ADDR_PCIE1 (9 | PMB_BUS_PCIE1 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE1 1
+
+#define PMB_BUS_PCIE2 0
+#define PMB_ADDR_PCIE2 (10 | PMB_BUS_PCIE2 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE2 1
+
+#define PMB_BUS_PCIE3 1
+#define PMB_ADDR_PCIE3 (12 | PMB_BUS_PCIE3 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE3 1
+
+#define PMB_BUS_SATA 0
+#define PMB_ADDR_SATA (11 | PMB_BUS_SATA << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_SATA 1
+
+#define PMB_BUS_SGMII 1
+#define PMB_ADDR_SGMII (14 | PMB_BUS_SGMII << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_SGMII 0
+
+#define PMB_BUS_SWITCH 1
+#define PMB_ADDR_SWITCH (0 | PMB_BUS_SWITCH << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_SWITCH 4
+
+#define PMB_BUS_XRDP_RC0 1
+#define PMB_ADDR_XRDP_RC0 (17 | PMB_BUS_XRDP_RC0 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_XRDP_RC0 1
+
+#define PMB_BUS_XRDP_RC1 1
+#define PMB_ADDR_XRDP_RC1 (18 | PMB_BUS_XRDP_RC1 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_XRDP_RC1 1
+
+#define PMB_BUS_XRDP_RC2 1
+#define PMB_ADDR_XRDP_RC2 (19 | PMB_BUS_XRDP_RC2 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_XRDP_RC2 1
+
+#define PMB_BUS_XRDP_RC3 1
+#define PMB_ADDR_XRDP_RC3 (20 | PMB_BUS_XRDP_RC3 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_XRDP_RC3 1
+
+#define PMB_BUS_XRDP_RC4 1
+#define PMB_ADDR_XRDP_RC4 (21 | PMB_BUS_XRDP_RC4 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_XRDP_RC4 1
+
+#define PMB_BUS_XRDP_RC5 1
+#define PMB_ADDR_XRDP_RC5 (22 | PMB_BUS_XRDP_RC5 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_XRDP_RC5 1
+
+#define PMB_BUS_VDSL3_CORE 0
+#define PMB_ADDR_VDSL3_CORE (23 | PMB_BUS_VDSL3_CORE << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_VDSL3_CORE 1
+
+#define PMB_BUS_VDSL3_MIPS PMB_BUS_VDSL3_CORE
+#define PMB_ADDR_VDSL3_MIPS PMB_ADDR_VDSL3_CORE
+#define PMB_ZONES_VDSL3_MIPS PMB_ZONES_VDSL3_CORE
+
+#define PMB_BUS_VDSL3_PMD 0
+#define PMB_ADDR_VDSL3_PMD (24 | PMB_BUS_VDSL3_PMD << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_VDSL3_PMD 1
+
+//--------- DGASP related bits/Offsets ------------------------
+#define BPCM_PHY_CNTL_OVERRIDE 0x08000000
+#define PMB_ADDR_VDSL_DGASP_PMD PMB_ADDR_VDSL3_PMD
+#define BPCM_VDSL_PHY_CTL_REG global_control // Alias for register containing DGASP override inside the VDSL PMD
+#define BPCM_VDSL_AFE_CTL_REG misc_control // Alias for register containing DGASP configuration inside the VDSL PMD
+
+#define PMB_BUS_CRYPTO 0
+#define PMB_ADDR_CRYPTO (25 | PMB_BUS_CRYPTO << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_CRYPTO 1
+
+#define AFEPLL_PMB_BUS_VDSL3_CORE 0
+#define AFEPLL_PMB_ADDR_VDSL3_CORE (26 | AFEPLL_PMB_BUS_VDSL3_CORE << PMB_BUS_ID_SHIFT)
+#define AFEPLL_PMB_ZONES_VDSL3_CORE 0
+
+#define PMB_BUS_ORION_CPU0 0
+#define PMB_ADDR_ORION_CPU0 (32 | PMB_BUS_ORION_CPU0 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_CPU0 1
+
+#define PMB_BUS_ORION_CPU1 0
+#define PMB_ADDR_ORION_CPU1 (33 | PMB_BUS_ORION_CPU1 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_CPU1 1
+
+#define PMB_BUS_ORION_CPU2 0
+#define PMB_ADDR_ORION_CPU2 (34 | PMB_BUS_ORION_CPU2 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_CPU2 1
+
+#define PMB_BUS_ORION_CPU3 0
+#define PMB_ADDR_ORION_CPU3 (35 | PMB_BUS_ORION_CPU3 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_CPU3 1
+
+#define PMB_BUS_ORION_NONCPU 0
+#define PMB_ADDR_ORION_NONCPU (36 | PMB_BUS_ORION_NONCPU << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_NONCPU 1
+
+#define PMB_BUS_ORION_ARS 0
+#define PMB_ADDR_ORION_ARS (37 | PMB_BUS_ORION_ARS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_ARS 0
+
+#define PMB_BUS_BIU_PLL 0
+#define PMB_ADDR_BIU_PLL (38 | PMB_BUS_BIU_PLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_BIU_PLL 0
+
+#define PMB_BUS_BIU_BPCM 0
+#define PMB_ADDR_BIU_BPCM (39 | PMB_BUS_BIU_BPCM << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_BIU_BPCM 1
+
+#define PMB_BUS_ORION_C0_ARS 0
+#define PMB_ADDR_ORION_C0_ARS (45 | PMB_BUS_ORION_C0_ARS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_C0_ARS 0
+
+#define PMB_BUS_PCM 1
+#define PMB_ADDR_PCM (3 | PMB_BUS_PCM << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCM 4
+
+enum {
+ PCM_Zone_Main,
+ PCM_Zone_PCM = 3
+};
+//--------- SOFT Reset bits for PCM ------------------------
+#define BPCM_PCM_SRESET_PCM_N 0x00000040
+
+#endif
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_63178.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_63178.h
new file mode 100644
index 0000000000..3f5855a905
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_63178.h
@@ -0,0 +1,137 @@
+/*
+<:copyright-BRCM:2019:DUAL/GPL:standard
+
+ Copyright (c) 2019 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+*/
+
+#ifndef PMC_ADDR_63178_H__
+#define PMC_ADDR_63178_H__
+
+#define PMB_BUS_ID_SHIFT 12
+
+#define PMB_BUS_PERIPH 0
+#define PMB_ADDR_PERIPH (0 | PMB_BUS_PERIPH << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PERIPH 4
+
+#define PMB_BUS_CHIP_CLKRST 0
+#define PMB_ADDR_CHIP_CLKRST (1 | PMB_BUS_CHIP_CLKRST << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_CHIP_CLKRST 0
+
+#define BPCM_CLKRST_AFE_PWRDWN 0x20000000
+
+#define PMB_BUS_AFEPLL 0
+#define PMB_ADDR_AFEPLL (2 | PMB_BUS_AFEPLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_AFEPLL 0
+
+#define AFEPLL_PMB_BUS_VDSL3_CORE PMB_BUS_AFEPLL
+#define AFEPLL_PMB_ADDR_VDSL3_CORE PMB_ADDR_AFEPLL
+#define AFEPLL_PMB_ZONES_VDSL3_CORE PMB_ZONES_AFEPLL
+
+#define PMB_BUS_PVTMON 0
+#define PMB_ADDR_PVTMON (3 | PMB_BUS_PVTMON << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PVTMON 0
+
+#define PMB_BUS_SWITCH 0
+#define PMB_ADDR_SWITCH (4 | PMB_BUS_SWITCH << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_SWITCH 4
+
+#define PMB_BUS_USB30_2X 0
+#define PMB_ADDR_USB30_2X (5 | PMB_BUS_USB30_2X << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_USB30_2X 4
+
+#define PMB_BUS_PCIE0 1
+#define PMB_ADDR_PCIE0 (6 | PMB_BUS_PCIE0 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE0 1
+
+#define PMB_BUS_VDSL3_CORE 1
+#define PMB_ADDR_VDSL3_CORE (7 | PMB_BUS_VDSL3_CORE << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_VDSL3_CORE 2
+
+#define PMB_BUS_VDSL3_MIPS PMB_BUS_VDSL3_CORE
+#define PMB_ADDR_VDSL3_MIPS PMB_ADDR_VDSL3_CORE
+#define PMB_ZONES_VDSL3_MIPS PMB_ZONES_VDSL3_CORE
+
+//--------- DGASP related bits/Offsets ------------------------
+#define BPCM_PHY_CNTL_OVERRIDE 0x08000000
+#define PMB_ADDR_VDSL_DGASP_PMD PMB_ADDR_VDSL3_CORE
+#define BPCM_VDSL_PHY_CTL_REG vdsl_phy_ctl // Alias for register containing DGASP override inside the VDSL PMD
+#define BPCM_VDSL_AFE_CTL_REG vdsl_afe_ctl // Alias for register containing DGASP configuration inside the VDSL PMD
+
+#define PMB_BUS_MEMC 1
+#define PMB_ADDR_MEMC (8 | PMB_BUS_MEMC << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_MEMC 1
+
+#define PMB_BUS_WLAN0_PHY1 0
+#define PMB_ADDR_WLAN0_PHY1 (9 | PMB_BUS_WLAN0_PHY1 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_WLAN0_PHY1 1
+
+#define PMB_BUS_WLAN0_PHY2 0
+#define PMB_ADDR_WLAN0_PHY2 (10 | PMB_BUS_WLAN0_PHY2 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_WLAN0_PHY2 1
+
+#define PMB_BUS_WLAN0 0
+#define PMB_ADDR_WLAN0 (11 | PMB_BUS_WLAN0 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_WLAN0 1
+
+#define PMB_BUS_ORION_CPU0 1
+#define PMB_ADDR_ORION_CPU0 (32 | PMB_BUS_ORION_CPU0 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_CPU0 1
+
+#define PMB_BUS_ORION_CPU1 1
+#define PMB_ADDR_ORION_CPU1 (33 | PMB_BUS_ORION_CPU1 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_CPU1 1
+
+#define PMB_BUS_ORION_CPU2 1
+#define PMB_ADDR_ORION_CPU2 (34 | PMB_BUS_ORION_CPU2 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_CPU2 1
+
+#define PMB_BUS_ORION_NONCPU 1
+#define PMB_ADDR_ORION_NONCPU (36 | PMB_BUS_ORION_NONCPU << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_NONCPU 1
+
+#define PMB_BUS_BIU_PLL 1
+#define PMB_ADDR_BIU_PLL (38 | PMB_BUS_BIU_PLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_BIU_PLL 0
+
+#define PMB_BUS_BIU_BPCM 1
+#define PMB_ADDR_BIU_BPCM (39 | PMB_BUS_BIU_BPCM << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_BIU_BPCM 1
+
+#define PMB_BUS_PCM PMB_BUS_PERIPH
+#define PMB_ADDR_PCM (0 | PMB_BUS_PCM << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCM 4
+
+enum {
+ PCM_Zone_Main,
+ PCM_Zone_PCM = 3
+};
+//--------- SOFT Reset bits for PCM ------------------------
+#define BPCM_PCM_SRESET_PCM_N 0x00000040
+
+#define RCAL_0P25UM_HORZ 0
+#define RCAL_0P25UM_VERT 1
+#define RCAL_0P5UM_HORZ 2
+#define RCAL_0P5UM_VERT 3
+#define RCAL_1UM_HORZ 4
+#define RCAL_1UM_VERT 5
+#define PMMISC_RMON_EXT_REG ((RCAL_1UM_VERT + 1)/2)
+#define PMMISC_RMON_VALID_MASK (0x1<<16)
+
+#endif
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_6756.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_6756.h
new file mode 100644
index 0000000000..d93e7568b0
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_6756.h
@@ -0,0 +1,122 @@
+/*
+<:copyright-BRCM:2020:DUAL/GPL:standard
+
+ Copyright (c) 2020 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+
+*/
+#ifndef PMC_ADDR_6756_H__
+#define PMC_ADDR_6756_H__
+
+#define PMB_BUS_ID_SHIFT 12
+
+#define PMB_BUS_PERIPH 1
+#define PMB_ADDR_PERIPH (16 | PMB_BUS_PERIPH << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PERIPH 4
+
+#define PMB_BUS_CRYPTO 0
+#define PMB_ADDR_CRYPTO (1 | PMB_BUS_CRYPTO << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_CRYPTO 1
+
+#define PMB_BUS_PVTMON 0
+#define PMB_ADDR_PVTMON (2 | PMB_BUS_PVTMON << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PVTMON 0
+
+#define PMB_BUS_CHIP_CLKRST 0
+#define PMB_ADDR_CHIP_CLKRST (3 | PMB_BUS_CHIP_CLKRST << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_CHIP_CLKRST 0
+
+#define PMB_BUS_USB31_20 0
+#define PMB_ADDR_USB31_20 (4 | PMB_BUS_USB31_20 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_USB31_20 4
+
+#define PMB_BUS_WLAN0 0
+#define PMB_ADDR_WLAN0 (5 | PMB_BUS_WLAN0 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_WLAN0 1
+
+#define PMB_BUS_WLAN0_PHY1 0
+#define PMB_ADDR_WLAN0_PHY1 (6 | PMB_BUS_WLAN0_PHY1 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_WLAN0_PHY1 1
+
+#define PMB_BUS_WLAN0_PHY2 0
+#define PMB_ADDR_WLAN0_PHY2 (7 | PMB_BUS_WLAN0_PHY2 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_WLAN0_PHY2 1
+
+#define PMB_BUS_WLAN1 0
+#define PMB_ADDR_WLAN1 (8 | PMB_BUS_WLAN1 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_WLAN1 1
+
+#define PMB_BUS_WLAN1_PHY1 0
+#define PMB_ADDR_WLAN1_PHY1 (9 | PMB_BUS_WLAN1_PHY1 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_WLAN1_PHY1 1
+
+#define PMB_BUS_WLAN1_PHY2 0
+#define PMB_ADDR_WLAN1_PHY2 (10 | PMB_BUS_WLAN1_PHY2 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_WLAN1_PHY2 1
+
+#define PMB_BUS_MEMC 0
+#define PMB_ADDR_MEMC (11 | PMB_BUS_MEMC << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_MEMC 1
+
+#define PMB_BUS_SWITCH 0
+#define PMB_ADDR_SWITCH (12 | PMB_BUS_SWITCH << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_SWITCH 5
+
+#define PMB_BUS_PCIE0 1
+#define PMB_ADDR_PCIE0 (17 | PMB_BUS_PCIE0 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE0 1
+
+#define PMB_BUS_ORION_CPU0 0
+#define PMB_ADDR_ORION_CPU0 (32 | PMB_BUS_ORION_CPU0 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_CPU0 1
+
+#define PMB_BUS_ORION_CPU1 0
+#define PMB_ADDR_ORION_CPU1 (33 | PMB_BUS_ORION_CPU1 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_CPU1 1
+
+#define PMB_BUS_ORION_CPU2 0
+#define PMB_ADDR_ORION_CPU2 (34 | PMB_BUS_ORION_CPU2 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_CPU2 1
+
+#define PMB_BUS_ORION_CPU3 0
+#define PMB_ADDR_ORION_CPU3 (35 | PMB_BUS_ORION_CPU3 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_CPU3 1
+
+#define PMB_BUS_ORION_NONCPU 0
+#define PMB_ADDR_ORION_NONCPU (36 | PMB_BUS_ORION_NONCPU << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_NONCPU 1
+
+#define PMB_BUS_BIU_PLL 0
+#define PMB_ADDR_BIU_PLL (38 | PMB_BUS_BIU_PLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_BIU_PLL 0
+
+#define PMB_BUS_BIU_BPCM 0
+#define PMB_ADDR_BIU_BPCM (39 | PMB_BUS_BIU_BPCM << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_BIU_BPCM 1
+
+#define RCAL_0P25UM_HORZ 0
+#define RCAL_0P25UM_VERT 1
+#define RCAL_0P5UM_HORZ 2
+#define RCAL_0P5UM_VERT 3
+#define RCAL_1UM_HORZ 4
+#define RCAL_1UM_VERT 5
+#define PMMISC_RMON_EXT_REG ((RCAL_1UM_VERT + 1)/2)
+#define PMMISC_RMON_VALID_MASK (0x1<<16)
+
+#endif
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_6813.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_6813.h
new file mode 100644
index 0000000000..5fa03e47c2
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_6813.h
@@ -0,0 +1,194 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+/*
+<:copyright-BRCM:2019:DUAL/GPL:standard
+
+ Copyright (c) 2019 Broadcom
+ All Rights Reserved
+
+Unless you and Broadcom execute a separate written software license
+agreement governing use of this software, this software is licensed
+to you under the terms of the GNU General Public License version 2
+(the "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php,
+with the following added to such license:
+
+ As a special exception, the copyright holders of this software give
+ you permission to link this software with independent modules, and
+ to copy and distribute the resulting executable under terms of your
+ choice, provided that you also meet, for each linked independent
+ module, the terms and conditions of the license of that module.
+ An independent module is a module which is not derived from this
+ software. The special exception does not apply to any modifications
+ of the software.
+
+Not withstanding the above, under no circumstances may you combine
+this software in any way with any other Broadcom software provided
+under a license other than the GPL, without Broadcom's express prior
+written consent.
+
+:>
+*/
+
+#ifndef _6813_PMC_ADDR_H
+#define _6813_PMC_ADDR_H
+
+#define PMB_BUS_MAX 2
+#define PMB_BUS_ID_SHIFT 12
+
+#define PMB_BUS_PERIPH 0
+#define PMB_ADDR_PERIPH (0 | PMB_BUS_PERIPH << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PERIPH 4
+
+#define PMB_BUS_CHIP_CLKRST 0
+#define PMB_ADDR_CHIP_CLKRST (1 | PMB_BUS_CHIP_CLKRST << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_CHIP_CLKRST 0
+
+#define PMB_BUS_PVTMON 1
+#define PMB_ADDR_PVTMON (3 | PMB_BUS_PVTMON << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PVTMON 0
+
+#define PMB_BUS_CRYPTO 1
+#define PMB_ADDR_CRYPTO (4 | PMB_BUS_CRYPTO << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_CRYPTO 0
+
+#define PMB_BUS_USB30_2X 0
+#define PMB_ADDR_USB30_2X (5 | PMB_BUS_USB30_2X << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_USB30_2X 4
+
+#define PMB_BUS_PCIE1 1
+#define PMB_ADDR_PCIE1 (6 | PMB_BUS_PCIE1 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE1 4
+
+// referring to PCIEG3
+#define PMB_BUS_PCIE3 1
+#define PMB_ADDR_PCIE3 (7 | PMB_BUS_PCIE3 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE3 1
+
+#define PMB_BUS_MEMC 1
+#define PMB_ADDR_MEMC (8 | PMB_BUS_MEMC << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_MEMC 1
+
+#define PMB_BUS_XRDP 1
+#define PMB_ADDR_XRDP (9 | PMB_BUS_XRDP << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_XRDP 1
+
+#define PMB_BUS_PCIE2 1
+#define PMB_ADDR_PCIE2 (11 | PMB_BUS_PCIE2 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE2 1
+
+#define PMB_BUS_PCIE0 0
+#define PMB_ADDR_PCIE0 (12 | PMB_BUS_PCIE0 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE0 1
+
+#define PMB_BUS_ETH 1
+#define PMB_ADDR_ETH (13 | PMB_BUS_ETH << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ETH 1
+
+#define PMB_BUS_MPM 1
+#define PMB_ADDR_MPM (14 | PMB_BUS_MPM << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_MPM 1
+
+#define PMB_BUS_XRDPPLL 0
+#define PMB_ADDR_XRDPPLL (15 | PMB_BUS_XRDPPLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_XRDPPLL 0
+
+#define PMB_BUS_PERIPH_ARS 0
+#define PMB_ADDR_PERIPH_ARS (16 | PMB_BUS_PERIPH_ARS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PERIPH_ARS 0
+
+#define PMB_BUS_PCIE0_UBUS_ARS 0
+#define PMB_ADDR_PCIE0_UBUS_ARS (17 | PMB_BUS_PCIE0_UBUS_ARS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE0_UBUS_ARS 0
+
+#define PMB_BUS_USB30_2X_ARS 0
+#define PMB_ADDR_USB30_2X_ARS (18 | PMB_BUS_USB30_2X_ARS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_USB30_2X_ARS 0
+
+#define PMB_BUS_SYS_ARS 0
+#define PMB_ADDR_SYS_ARS (19 | PMB_BUS_SYS_ARS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_SYS_ARS 0
+
+#define PMB_BUS_CRYPTO2_ARS 1
+#define PMB_ADDR_CRYPTO2_ARS (20 | PMB_BUS_CRYPTO2_ARS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_CRYPTO2_ARS 0
+
+#define PMB_BUS_XRDP_ARS 1
+#define PMB_ADDR_XRDP_ARS (21 | PMB_BUS_XRDP_ARS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_XRDP_ARS 0
+
+#define PMB_BUS_MPM_ARS 1
+#define PMB_ADDR_MPM_ARS (22 | PMB_BUS_MPM_ARS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_MPM_ARS 0
+
+#define PMB_BUS_MEMC_ARS 1
+#define PMB_ADDR_MEMC_ARS (23 | PMB_BUS_MEMC_ARS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_MEMC_ARS 0
+
+#define PMB_BUS_ETH_ARS 1
+#define PMB_ADDR_ETH_ARS (24 | PMB_BUS_ETH_ARS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ETH_ARS 0
+
+#define PMB_BUS_PCIE1_UBUS_ARS 1
+#define PMB_ADDR_PCIE1_UBUS_ARS (25 | PMB_BUS_PCIE1_UBUS_ARS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE1_UBUS_ARS 0
+
+#define PMB_BUS_PCIE3_ARS 1
+#define PMB_ADDR_PCIE3_ARS (26 | PMB_BUS_PCIE3_ARS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE3_ARS 0
+
+#define PMB_BUS_MERLIN0_UBUS_ARS 1
+#define PMB_ADDR_MERLIN0_UBUS_ARS (27 | PMB_BUS_MERLIN0_UBUS_ARS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_MERLIN0_UBUS_ARS 0
+
+#define PMB_BUS_MERLIN1_UBUS_ARS 1
+#define PMB_ADDR_MERLIN1_UBUS_ARS (28 | PMB_BUS_MERLIN1_UBUS_ARS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_MERLIN1_UBUS_ARS 0
+
+#define PMB_BUS_MERLIN2_UBUS_ARS 1
+#define PMB_ADDR_MERLIN2_UBUS_ARS (29 | PMB_BUS_MERLIN2_UBUS_ARS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_MERLIN2_UBUS_ARS 0
+
+#define PMB_BUS_ORION_PLL 1
+#define PMB_ADDR_ORION_PLL (32 | PMB_BUS_ORION_PLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_PLL 0
+#define PMB_BUS_BIU_PLL PMB_BUS_ORION_PLL
+#define PMB_ADDR_BIU_PLL PMB_ADDR_ORION_PLL
+#define PMB_ZONES_BIU_PLL PMB_ZONES_ORION_PLL
+
+#define PMB_BUS_ORION_BPCM 1
+#define PMB_ADDR_ORION_BPCM (33 | PMB_BUS_ORION_BPCM << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_BPCM 1
+#define PMB_BUS_BIU_BPCM PMB_BUS_ORION_BPCM
+#define PMB_ADDR_BIU_BPCM PMB_ADDR_ORION_BPCM
+#define PMB_ZONES_BIU_BPCM PMB_ZONES_ORION_BPCM
+
+#define PMB_BUS_ORION_CPU0 1
+#define PMB_ADDR_ORION_CPU0 (34 | PMB_BUS_ORION_CPU0 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_CPU0 1
+
+#define PMB_BUS_ORION_CPU1 1
+#define PMB_ADDR_ORION_CPU1 (35 | PMB_BUS_ORION_CPU1 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_CPU1 1
+
+#define PMB_BUS_ORION_CPU2 1
+#define PMB_ADDR_ORION_CPU2 (36 | PMB_BUS_ORION_CPU2 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_CPU2 1
+
+#define PMB_BUS_ORION_CPU3 1
+#define PMB_ADDR_ORION_CPU3 (37 | PMB_BUS_ORION_CPU3 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_CPU3 1
+
+#define PMB_BUS_ORION_NONCPU 1
+#define PMB_ADDR_ORION_NONCPU (38 | PMB_BUS_ORION_NONCPU << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_NONCPU 1
+
+#define PMB_BUS_ORION_ARS 1
+#define PMB_ADDR_ORION_ARS (39 | PMB_BUS_ORION_ARS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_ARS 0
+
+#define PMB_BUS_ORION_ACEBIU_ARS 1
+#define PMB_ADDR_ORION_ACEBIU_ARS (40 | PMB_BUS_ORION_ACEBIU_ARS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_ACEBIU_ARS 0
+#endif
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_6846.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_6846.h
new file mode 100644
index 0000000000..a61d31b9f9
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_6846.h
@@ -0,0 +1,90 @@
+/*
+<:copyright-BRCM:2019:DUAL/GPL:standard
+
+ Copyright (c) 2019 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+*/
+
+#ifndef PMC_ADDR_6846_H__
+#define PMC_ADDR_6846_H__
+
+#define PMB_BUS_MAX 2
+#define PMB_BUS_ID_SHIFT 12
+
+#define PMB_BUS_PERIPH 0
+#define PMB_ADDR_PERIPH (0 | PMB_BUS_PERIPH << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PERIPH 4
+
+#define PMB_BUS_CHIP_CLKRST 1
+#define PMB_ADDR_CHIP_CLKRST (1 | PMB_BUS_CHIP_CLKRST << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_CHIP_CLKRST 0
+
+#define PMB_BUS_RDPPLL 1
+#define PMB_ADDR_RDPPLL (3 | PMB_BUS_RDPPLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_RDPPLL 0
+
+#define PMB_BUS_PVTMON 1
+#define PMB_ADDR_PVTMON (6 | PMB_BUS_PVTMON << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PVTMON 0
+
+#define PMB_BUS_MEMC 1
+#define PMB_ADDR_MEMC (8 | PMB_BUS_MEMC << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_MEMC 1
+
+#define PMB_BUS_USB20_2X 1
+#define PMB_ADDR_USB20_2X (10 | PMB_BUS_USB20_2X << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_USB20_2X 4
+
+#define PMB_BUS_WAN 1
+#define PMB_ADDR_WAN (11 | PMB_BUS_WAN << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_WAN 3
+
+#define PMB_BUS_XRDP 1
+#define PMB_ADDR_XRDP (12 | PMB_BUS_XRDP << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_XRDP 3
+
+#define PMB_BUS_XRDP_RC0 1
+#define PMB_ADDR_XRDP_RC0 (14 | PMB_BUS_XRDP_RC0 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_XRDP_RC0 1
+
+#define PMB_BUS_XRDP_RC1 1
+#define PMB_ADDR_XRDP_RC1 (15 | PMB_BUS_XRDP_RC1 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_XRDP_RC1 1
+
+#define PMB_BUS_XRDP_RC2 1
+#define PMB_ADDR_XRDP_RC2 (16 | PMB_BUS_XRDP_RC2 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_XRDP_RC2 1
+
+#define PMB_BUS_PCIE0 0
+#define PMB_ADDR_PCIE0 (18 | PMB_BUS_PCIE0 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE0 1
+
+#define PMB_BUS_PCIE1 0
+#define PMB_ADDR_PCIE1 (19 | PMB_BUS_PCIE1 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE1 1
+
+#define PMB_BUS_BIU_PLL 1
+#define PMB_ADDR_BIU_PLL (38 | PMB_BUS_BIU_PLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_BIU_PLL 1
+
+#define PMB_BUS_BIU_BPCM 1
+#define PMB_ADDR_BIU_BPCM (39 | PMB_BUS_BIU_BPCM << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_BIU_BPCM 1
+
+#endif
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_6855.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_6855.h
new file mode 100644
index 0000000000..2f24616c6c
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_6855.h
@@ -0,0 +1,106 @@
+/*
+<:copyright-BRCM:2019:DUAL/GPL:standard
+
+ Copyright (c) 2019 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+*/
+
+#ifndef PMC_ADDR_6855_H__
+#define PMC_ADDR_6855_H__
+
+#define PMB_BUS_MAX 2
+#define PMB_BUS_ID_SHIFT 12
+
+#define PMB_BUS_PERIPH 0
+#define PMB_ADDR_PERIPH (0 | PMB_BUS_PERIPH << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PERIPH 4
+
+#define PMB_BUS_CHIP_CLKRST 0
+#define PMB_ADDR_CHIP_CLKRST (1 | PMB_BUS_CHIP_CLKRST << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_CHIP_CLKRST 0
+
+#define PMB_BUS_SYSPLL 0
+#define PMB_ADDR_SYSPLL (3 | PMB_BUS_SYSPLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_SYSPLL 0
+
+#define PMB_BUS_PVTMON 0
+#define PMB_ADDR_PVTMON (6 | PMB_BUS_PVTMON << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PVTMON 0
+
+#define PMB_BUS_MEMC 0
+#define PMB_ADDR_MEMC (8 | PMB_BUS_MEMC << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_MEMC 1
+
+#define PMB_BUS_USB20_2X 1
+#define PMB_ADDR_USB20_2X (10 | PMB_BUS_USB20_2X << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_USB20_2X 4
+
+#define PMB_BUS_WAN 1
+#define PMB_ADDR_WAN (11 | PMB_BUS_WAN << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_WAN 3
+
+#define PMB_BUS_XRDP 1
+#define PMB_ADDR_XRDP (12 | PMB_BUS_XRDP << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_XRDP 3
+
+#define PMB_BUS_PCIE0 1
+#define PMB_ADDR_PCIE0 (17 | PMB_BUS_PCIE0 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE0 1
+
+#define PMB_BUS_PCIE1 1
+#define PMB_ADDR_PCIE1 (18 | PMB_BUS_PCIE1 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE1 1
+
+#define PMB_BUS_WLAN0 1
+#define PMB_ADDR_WLAN0 (19 | PMB_BUS_WLAN0 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_WLAN0 1
+
+#define PMB_BUS_WLAN0_PHY1 1
+#define PMB_ADDR_WLAN0_PHY1 (20 | PMB_BUS_WLAN0_PHY1 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_WLAN0_PHY1 1
+
+#define PMB_BUS_WLAN0_PHY2 1
+#define PMB_ADDR_WLAN0_PHY2 (21 | PMB_BUS_WLAN0_PHY2 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_WLAN0_PHY2 1
+
+#define PMB_BUS_ORION_CPU0 0
+#define PMB_ADDR_ORION_CPU0 (32 | PMB_BUS_ORION_CPU0 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_CPU0 1
+
+#define PMB_BUS_ORION_CPU1 0
+#define PMB_ADDR_ORION_CPU1 (33 | PMB_BUS_ORION_CPU1 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_CPU1 1
+
+#define PMB_BUS_ORION_CPU2 0
+#define PMB_ADDR_ORION_CPU2 (33 | PMB_BUS_ORION_CPU2 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_CPU2 1
+
+#define PMB_BUS_ORION_NONCPU 0
+#define PMB_ADDR_ORION_NONCPU (36 | PMB_BUS_ORION_NONCPU << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_NONCPU 1
+
+#define PMB_BUS_BIU_PLL 0
+#define PMB_ADDR_BIU_PLL (38 | PMB_BUS_BIU_PLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_BIU_PLL 0
+
+#define PMB_BUS_BIU_BPCM 0
+#define PMB_ADDR_BIU_BPCM (39 | PMB_BUS_BIU_BPCM << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_BIU_BPCM 1
+
+#endif
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_6856.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_6856.h
new file mode 100644
index 0000000000..44246bad8b
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_6856.h
@@ -0,0 +1,132 @@
+/*
+<:copyright-BRCM:2019:DUAL/GPL:standard
+
+ Copyright (c) 2019 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+*/
+
+#ifndef PMC_ADDR_6856_H__
+#define PMC_ADDR_6856_H__
+
+/* TODO: FIXME Verify the correctness of the bpcms*/
+
+#define PMB_BUS_MAX 2
+#define PMB_BUS_ID_SHIFT 12
+
+#define PMB_BUS_PERIPH 0
+#define PMB_ADDR_PERIPH (0 | PMB_BUS_PERIPH << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PERIPH 4
+
+#define PMB_BUS_MEMC 0
+#define PMB_ADDR_MEMC (1 | PMB_BUS_MEMC << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_MEMC 1
+
+#define PMB_BUS_PVTMON 0
+#define PMB_ADDR_PVTMON (2 | PMB_BUS_PVTMON << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PVTMON 0
+
+#define PMB_BUS_CHIP_CLKRST 0
+#define PMB_ADDR_CHIP_CLKRST (3 | PMB_BUS_CHIP_CLKRST << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_CHIP_CLKRST 0
+
+#define PMB_BUS_USB30_2X 0
+#define PMB_ADDR_USB30_2X (4 | PMB_BUS_USB30_2X << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_USB30_2X 4
+
+#define PMB_BUS_SYSPLL 0
+#define PMB_ADDR_SYSPLL (5 | PMB_BUS_SYSPLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_SYSPLL 0
+
+#define PMB_BUS_RDPPLL 0
+#define PMB_ADDR_RDPPLL (6 | PMB_BUS_RDPPLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_RDPPLL 0
+
+#define PMB_BUS_PCIE0 1
+#define PMB_ADDR_PCIE0 (7 | PMB_BUS_PCIE0 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE0 1
+
+#define PMB_BUS_PCIE1 1
+#define PMB_ADDR_PCIE1 (8 | PMB_BUS_PCIE1 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE1 1
+
+#define PMB_BUS_PCIE2 1
+#define PMB_ADDR_PCIE2 (9 | PMB_BUS_PCIE2 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE2 1
+
+#define PMB_BUS_XRDP 1
+#define PMB_ADDR_XRDP (10 | PMB_BUS_XRDP << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_XRDP 3
+
+#define PMB_BUS_XRDP_RC0 1
+#define PMB_ADDR_XRDP_RC0 (11 | PMB_BUS_XRDP_RC0 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_XRDP_RC0 1
+
+#define PMB_BUS_XRDP_RC1 1
+#define PMB_ADDR_XRDP_RC1 (12 | PMB_BUS_XRDP_RC1 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_XRDP_RC1 1
+
+#define PMB_BUS_XRDP_RC2 1
+#define PMB_ADDR_XRDP_RC2 (13 | PMB_BUS_XRDP_RC2 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_XRDP_RC2 1
+
+#define PMB_BUS_XRDP_RC3 1
+#define PMB_ADDR_XRDP_RC3 (14 | PMB_BUS_XRDP_RC3 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_XRDP_RC3 1
+
+#define PMB_BUS_XRDP_RC4 1
+#define PMB_ADDR_XRDP_RC4 (15 | PMB_BUS_XRDP_RC4 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_XRDP_RC4 1
+
+#define PMB_BUS_XRDP_RC5 1
+#define PMB_ADDR_XRDP_RC5 (16 | PMB_BUS_XRDP_RC5 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_XRDP_RC5 1
+
+#define PMB_BUS_XRDP_RC6 1
+#define PMB_ADDR_XRDP_RC6 (17 | PMB_BUS_XRDP_RC6 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_XRDP_RC6 1
+
+#define PMB_BUS_XRDP_RC7 1
+#define PMB_ADDR_XRDP_RC7 (18 | PMB_BUS_XRDP_RC7 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_XRDP_RC7 1
+
+#define PMB_BUS_WAN 1
+#define PMB_ADDR_WAN (19 | PMB_BUS_WAN << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_WAN 6
+
+#define PMB_BUS_ORION_CPU0 0
+#define PMB_ADDR_ORION_CPU0 (32 | PMB_BUS_ORION_CPU0 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_CPU0 1
+
+#define PMB_BUS_ORION_CPU1 0
+#define PMB_ADDR_ORION_CPU1 (33 | PMB_BUS_ORION_CPU1 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_CPU1 1
+
+#define PMB_BUS_ORION_NONCPU 0
+#define PMB_ADDR_ORION_NONCPU (36 | PMB_BUS_ORION_NONCPU << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_NONCPU 1
+
+#define PMB_BUS_BIU_PLL 0
+#define PMB_ADDR_BIU_PLL (38 | PMB_BUS_BIU_PLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_BIU_PLL 1
+
+#define PMB_BUS_BIU_BPCM 0
+#define PMB_ADDR_BIU_BPCM (39 | PMB_BUS_BIU_BPCM << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_BIU_BPCM 1
+
+#endif
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_6858.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_6858.h
new file mode 100644
index 0000000000..5e7f0a4c7a
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_6858.h
@@ -0,0 +1,162 @@
+/*
+<:copyright-BRCM:2019:DUAL/GPL:standard
+
+ Copyright (c) 2019 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+*/
+
+#ifndef PMC_ADDR_6858_H__
+#define PMC_ADDR_6858_H__
+
+#define PMB_BUS_MAX 2
+#define PMB_BUS_ID_SHIFT 8
+
+#define PMB_BUS_PERIPH 0
+#define PMB_ADDR_PERIPH (0 | PMB_BUS_PERIPH << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PERIPH 3
+
+#define PMB_BUS_CHIP_CLKRST 0
+#define PMB_ADDR_CHIP_CLKRST (1 | PMB_BUS_CHIP_CLKRST << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_CHIP_CLKRST 0
+
+#define PMB_BUS_SYSPLL 0
+#define PMB_ADDR_SYSPLL (2 | PMB_BUS_SYSPLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_SYSPLL 0
+
+#define PMB_BUS_RDPPLL 0
+#define PMB_ADDR_RDPPLL (3 | PMB_BUS_RDPPLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_RDPPLL 0
+
+#define PMB_BUS_UNIPLL 0
+#define PMB_ADDR_UNIPLL (5 | PMB_BUS_UNIPLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_UNIPLL 0
+
+#define PMB_BUS_CRYPTO 1
+#define PMB_ADDR_CRYPTO (6 | PMB_BUS_CRYPTO << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_CRYPTO 0
+
+#define PMB_BUS_APM 0
+#define PMB_ADDR_APM (7 | PMB_BUS_APM << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_APM 2
+
+#define PMB_BUS_MEMC 0
+#define PMB_ADDR_MEMC (8 | PMB_BUS_MEMC << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_MEMC 1
+
+#define PMB_BUS_LPORT 1
+#define PMB_ADDR_LPORT (9 | PMB_BUS_LPORT << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_LPORT 3
+
+#define PMB_BUS_USB30_2X 1
+#define PMB_ADDR_USB30_2X (10 | PMB_BUS_USB30_2X << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_USB30_2X 4
+
+#define PMB_BUS_WAN 1
+#define PMB_ADDR_WAN (11 | PMB_BUS_WAN << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_WAN 7
+
+#define PMB_BUS_XRDP 1
+#define PMB_ADDR_XRDP (12 | PMB_BUS_XRDP << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_XRDP 3
+
+#define PMB_BUS_XRDP_QM 1
+#define PMB_ADDR_XRDP_QM (13 | PMB_BUS_XRDP_QM << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_XRDP_QM 1
+
+#define PMB_BUS_XRDP_RC_QUAD0 1
+#define PMB_ADDR_XRDP_RC_QUAD0 (14 | PMB_BUS_XRDP_RC_QUAD0 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_XRDP_RC_QUAD0 1
+
+#define PMB_BUS_XRDP_RC_QUAD1 1
+#define PMB_ADDR_XRDP_RC_QUAD1 (15 | PMB_BUS_XRDP_RC_QUAD1 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_XRDP_RC_QUAD1 1
+
+#define PMB_BUS_XRDP_RC_QUAD2 1
+#define PMB_ADDR_XRDP_RC_QUAD2 (16 | PMB_BUS_XRDP_RC_QUAD2 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_XRDP_RC_QUAD2 1
+
+#define PMB_BUS_XRDP_RC_QUAD3 1
+#define PMB_ADDR_XRDP_RC_QUAD3 (17 | PMB_BUS_XRDP_RC_QUAD3 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_XRDP_RC_QUAD3 1
+
+#define PMB_BUS_PCIE0 1
+#define PMB_ADDR_PCIE0 (18 | PMB_BUS_PCIE0 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE0 1
+
+#define PMB_BUS_PCIE1 1
+#define PMB_ADDR_PCIE1 (19 | PMB_BUS_PCIE1 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE1 1
+
+#define PMB_BUS_SATA 1
+#define PMB_ADDR_SATA (20 | PMB_BUS_SATA << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_SATA 1
+
+#define PMB_BUS_PCIE_UBUS 1
+#define PMB_ADDR_PCIE_UBUS (21 | PMB_BUS_PCIE_UBUS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE_UBUS 1
+
+#define PMB_BUS_ORION_CPU0 0
+#define PMB_ADDR_ORION_CPU0 (24 | PMB_BUS_ORION_CPU0 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_CPU0 1
+
+#define PMB_BUS_ORION_CPU1 0
+#define PMB_ADDR_ORION_CPU1 (25 | PMB_BUS_ORION_CPU1 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_CPU1 1
+
+#define PMB_BUS_ORION_CPU2 0
+#define PMB_ADDR_ORION_CPU2 (26 | PMB_BUS_ORION_CPU2 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_CPU2 1
+
+#define PMB_BUS_ORION_CPU3 0
+#define PMB_ADDR_ORION_CPU3 (27 | PMB_BUS_ORION_CPU3 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_CPU3 1
+
+#define PMB_BUS_ORION_NONCPU 0
+#define PMB_ADDR_ORION_NONCPU (28 | PMB_BUS_ORION_NONCPU << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_NONCPU 1
+
+#define PMB_BUS_ORION_ARS 0
+#define PMB_ADDR_ORION_ARS (29 | PMB_BUS_ORION_ARS << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_ARS 1
+
+#define PMB_BUS_BIU_PLL 0
+#define PMB_ADDR_BIU_PLL (30 | PMB_BUS_BIU_PLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_BIU_PLL 1 // FIXMET
+
+#define PMB_BUS_BIU_BPCM 0
+#define PMB_ADDR_BIU_BPCM (31 | PMB_BUS_BIU_BPCM << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_BIU_BPCM 1
+
+#define PMB_BUS_PCM 0
+
+#define PMB_ADDR_PCM (0 | PMB_BUS_PCM << PMB_BUS_ID_SHIFT)
+
+#define PMB_ZONES_PCM 2
+enum {
+ PCM_Zone_Main,
+ PCM_Zone_PCM = 3,
+};
+//--------- SOFT Reset bits for PCM ------------------------
+#define BPCM_PCM_SRESET_HARDRST_N 0x00000004
+
+#define BPCM_PCM_SRESET_PCM_N 0x00000040
+
+#define BPCM_PCM_SRESET_BUS_N 0x00000001
+
+#endif
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_6878.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_6878.h
new file mode 100644
index 0000000000..d798cd567c
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_addr_6878.h
@@ -0,0 +1,90 @@
+/*
+<:copyright-BRCM:2019:DUAL/GPL:standard
+
+ Copyright (c) 2019 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+*/
+
+#ifndef PMC_ADDR_6878_H__
+#define PMC_ADDR_6878_H__
+
+#define PMB_BUS_MAX 2
+#define PMB_BUS_ID_SHIFT 12
+
+#define PMB_BUS_PERIPH 0
+#define PMB_ADDR_PERIPH (0 | PMB_BUS_PERIPH << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PERIPH 3
+
+#define PMB_BUS_CHIP_CLKRST 1
+#define PMB_ADDR_CHIP_CLKRST (1 | PMB_BUS_CHIP_CLKRST << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_CHIP_CLKRST 0
+
+#define PMB_BUS_SYSPLL 1
+#define PMB_ADDR_SYSPLL (3 | PMB_BUS_SYSPLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_SYSPLL 0
+
+#define PMB_BUS_PVTMON 1
+#define PMB_ADDR_PVTMON (6 | PMB_BUS_PVTMON << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PVTMON 0
+
+#define PMB_BUS_MEMC 1
+#define PMB_ADDR_MEMC (8 | PMB_BUS_MEMC << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_MEMC 1
+
+#define PMB_BUS_USB20_2X 1
+#define PMB_ADDR_USB20_2X (10 | PMB_BUS_USB20_2X << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_USB20_2X 4
+
+#define PMB_BUS_WAN 1
+#define PMB_ADDR_WAN (11 | PMB_BUS_WAN << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_WAN 3
+
+#define PMB_BUS_XRDP 1
+#define PMB_ADDR_XRDP (12 | PMB_BUS_XRDP << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_XRDP 3
+
+#define PMB_BUS_PCIE0 1
+#define PMB_ADDR_PCIE0 (18 | PMB_BUS_PCIE0 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_PCIE0 1
+
+#define PMB_BUS_WLAN0 0
+#define PMB_ADDR_WLAN0 (19 | PMB_BUS_WLAN0 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_WLAN0 1
+
+#define PMB_BUS_ORION_CPU0 1
+#define PMB_ADDR_ORION_CPU0 (32 | PMB_BUS_ORION_CPU0 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_CPU0 1
+
+#define PMB_BUS_ORION_CPU1 1
+#define PMB_ADDR_ORION_CPU1 (33 | PMB_BUS_ORION_CPU1 << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_CPU1 1
+
+#define PMB_BUS_ORION_NONCPU 1
+#define PMB_ADDR_ORION_NONCPU (36 | PMB_BUS_ORION_NONCPU << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_ORION_NONCPU 1
+
+#define PMB_BUS_BIU_PLL 1
+#define PMB_ADDR_BIU_PLL (38 | PMB_BUS_BIU_PLL << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_BIU_PLL 0
+
+#define PMB_BUS_BIU_BPCM 1
+#define PMB_ADDR_BIU_BPCM (39 | PMB_BUS_BIU_BPCM << PMB_BUS_ID_SHIFT)
+#define PMB_ZONES_BIU_BPCM 1
+
+#endif
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_cpu_core.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_cpu_core.h
new file mode 100644
index 0000000000..fa8478deef
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_cpu_core.h
@@ -0,0 +1,32 @@
+/*
+<:copyright-BRCM:2013:DUAL/GPL:standard
+
+ Copyright (c) 2013 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+*/
+
+#ifndef PMC_CPU_CORE_H
+#define PMC_CPU_CORE_H
+
+int pmc_cpu_core_power_up(unsigned cpu);
+int pmc_cpu_core_power_down(unsigned cpu);
+int pmc_cpu_l2cache_power_up(void);
+int pmc_cpu_l2cache_power_down(void);
+
+#endif //#ifndef PMC_CPU_CORE_H
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_drv.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_drv.h
new file mode 100644
index 0000000000..46902841c5
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_drv.h
@@ -0,0 +1,251 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * Copyright 2019 Broadcom Ltd.
+ */
+/*
+<:copyright-BRCM:2013:DUAL/GPL:standard
+
+ Copyright (c) 2013 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+*/
+
+/*****************************************************************************
+ * Description:
+ * This contains header for PMC driver.
+ *****************************************************************************/
+
+#ifndef PMC_DRV_H
+#define PMC_DRV_H
+
+#include "pmc_drv_special.h"
+
+// this is for the host
+#define PMC_LITTLE_ENDIAN 1
+
+#if IS_BCMCHIP(6846) || IS_BCMCHIP(6856) || IS_BCMCHIP(63178) || \
+ IS_BCMCHIP(47622) || IS_BCMCHIP(63146) || IS_BCMCHIP(4912) || \
+ IS_BCMCHIP(6756)
+#define PMC_IMPL_3_X
+#elif IS_BCMCHIP(6878) || IS_BCMCHIP(6855)
+#define PMC_ON_HOSTCPU 1
+#else
+#define PMC_CPU_BIG_ENDIAN 1
+#endif
+
+#if IS_BCMCHIP(63178) || IS_BCMCHIP(47622) || IS_BCMCHIP(63146) || \
+ IS_BCMCHIP(4912)
+#define PMC_LOG_IN_DTCM 1
+#endif
+
+#if IS_BCMCHIP(63146) || IS_BCMCHIP(4912)
+#define PMC_FW_IN_ITCM 1
+#endif
+
+#if IS_BCMCHIP(6756)
+#define PMC_BOOT_TMO_SECONDS 2
+#else
+#define PMC_BOOT_TMO_SECONDS 0
+#endif
+
+#if defined(CFG_RAMAPP) && (defined(PMC_IMPL_3_X) || IS_BCMCHIP(63158)) && \
+ !defined(CONFIG_BRCM_IKOS)
+#define PMC_RAM_BOOT
+//#if defined(PMC_IMPL_3_X)
+//#define AVS_DEBUG
+//#endif
+#if IS_BCMCHIP(63158)
+#define PMC_IN_MAIN_LOOP kPMCRunStateRunning
+#else
+#define PMC_IN_MAIN_LOOP 6
+#endif
+#endif
+
+/* there are 32 DQM, since REPLY DQM will always be one after the REQUEST
+ * DQM, we should use use 0 to 30 for REQ DQM, so RPL DQM will be 1 to 31 */
+/* 63138 has pair of DQM#0+DQM#1, #2+#3, #4+#5, and #6+#7. We will use
+ * DQM#0+DQM#1 pair */
+#define PMC_DQM_REQ_NUM 0
+
+#define PMC_DQM_RPL_NUM (PMC_DQM_REQ_NUM + 1)
+#define PMC_DQM_RPL_STS (1 << PMC_DQM_RPL_NUM)
+
+#define PMC_MODE_DQM 0
+#define PMC_MODE_PMB_DIRECT 1
+#ifdef PMC_IMPL_3_X
+#define PMC_ACCESS_BPCM_DIRECT 1
+#else
+#define PMC_ACCESS_BPCM_DIRECT 0
+#endif
+
+#ifndef _LANGUAGE_ASSEMBLY
+// ---------------------------- Returned error codes --------------------------
+enum {
+ // 0..15 may come from either the interface or from the PMC command handler
+ // 256 or greater only come from the interface
+ kPMC_NO_ERROR,
+ kPMC_INVALID_ISLAND,
+ kPMC_INVALID_DEVICE,
+ kPMC_INVALID_ZONE,
+ kPMC_INVALID_STATE,
+ kPMC_INVALID_COMMAND,
+ kPMC_LOG_EMPTY,
+ kPMC_INVALID_PARAM,
+ kPMC_BPCM_READ_TIMEOUT,
+ kPMC_INVALID_BUS,
+ kPMC_INVALID_QUEUE_NUMBER,
+ kPMC_QUEUE_NOT_AVAILABLE,
+ kPMC_INVALID_TOKEN_SIZE,
+ kPMC_INVALID_WATERMARKS,
+ kPMC_INSUFFICIENT_QSM_MEMORY,
+ kPMC_INVALID_BOOT_COMMAND,
+ kPMC_BOOT_FAILED,
+ kPMC_COMMAND_TIMEOUT = 256,
+ kPMC_MESSAGE_ID_MISMATCH,
+};
+
+// ---------------------------- Returned log entry structure --------------------------
+typedef struct {
+ uint8_t reserved;
+ uint8_t logMsgID;
+ uint8_t errorCode;
+ uint8_t logCmdID;
+ uint8_t srcPort;
+ uint8_t e_msgID;
+ uint8_t e_errorCode;
+ uint8_t e_cmdID;
+ struct {
+ uint32_t logReplyNum:8;
+ uint32_t e_Island:4;
+ uint32_t e_Bus:2;
+ uint32_t e_DevAddr:8;
+ uint32_t e_Zone:10;
+ } s;
+ uint32_t e_Data0;
+} TErrorLogEntry;
+
+// ---------------------------- Power states --------------------------
+enum {
+ kPMCPowerState_Unknown,
+ kPMCPowerState_NoPower,
+ kPMCPowerState_LowPower,
+ kPMCPowerState_FullPower,
+};
+
+// PMC run-state:
+enum {
+ kPMCRunStateExecutingBootROM = 0,
+ kPMCRunStateWaitingBMUComplete,
+ kPMCRunStateAVSCompleteWaitingForImage,
+ kPMCRunStateAuthenticatingImage,
+ kPMCRunStateAuthenticationFailed,
+ kPMCRunStateReserved,
+ kPMCRunStateStalled,
+ kPMCRunStateRunning
+};
+
+// the only valid "gear" values for "SetClockGear" function
+enum {
+ kClockGearLow,
+ kClockGearHigh,
+ kClockGearDynamic,
+ kClockGearBypass
+};
+
+// PMC Boot options ( parameter for pmc_boot function )
+enum {
+ kPMCBootDefault = 0,
+ kPMCBootAVSDisable,
+ kPMCBootAVSTrackDisable,
+ kPMCBootLogBuffer,
+ kPMCBootLogSize
+};
+
+// int TuneRunner(void);
+// int GetSelect0(void);
+// int GetSelect3(void);
+int pmc_init(void);
+void pmc_reset(void);
+void pmc_initmode(void);
+// int get_pmc_boot_param(unsigned boot_option, unsigned *boot_param);
+void pmc_log(int log_type);
+void pmc_save_log_item(void);
+void pmc_show_log_item(void);
+int read_bpcm_reg_direct(int devAddr, int wordOffset, uint32_t * value);
+int write_bpcm_reg_direct(int devAddr, int wordOffset, uint32_t value);
+int GetRevision(unsigned int *change, unsigned int *revision);
+int GetPVT(int sel, int island, int *value);
+#if (!defined(PMC_IMPL_3_X) && !defined(PMC_ON_HOSTCPU)) || IS_BCMCHIP(63178) || IS_BCMCHIP(47622)
+int GetRCalSetting(int resistor, int *rcal);
+#endif
+int GetDevPresence(int devAddr, int *value);
+int GetSWStrap(int devAddr, int *value);
+int GetHWRev(int devAddr, int *value);
+int GetNumZones(int devAddr, int *value);
+int GetAvsDisableState(int island, int *state);
+int Ping(void);
+int GetErrorLogEntry(TErrorLogEntry * logEntry);
+int SetClockHighGear(int devAddr, int zone, int clkN);
+int SetClockLowGear(int devAddr, int zone, int clkN);
+int SetClockGear(int devAddr, int zone, int gear);
+int SetRunState(int island, int state);
+int SetPowerState(int island, int state);
+#if !defined(PMC_ON_HOSTCPU)
+void BootPmcNoRom(unsigned long physAddr);
+#endif
+int ReadBPCMRegister(int devAddr, int wordOffset, uint32_t * value);
+int WriteBPCMRegister(int devAddr, int wordOffset, uint32_t value);
+int ReadZoneRegister(int devAddr, int zone, int wordOffset, uint32_t * value);
+int WriteZoneRegister(int devAddr, int zone, int wordOffset, uint32_t value);
+int PowerOnDevice(int devAddr);
+int PowerOffDevice(int devAddr, int repower);
+int PowerOnZone(int devAddr, int zone);
+int PowerOffZone(int devAddr, int zone);
+int ResetDevice(int devAddr);
+int ResetZone(int devAddr, int zone);
+int CloseAVS(int island, unsigned short margin_mv_slow,
+ unsigned short margin_mv_fast, unsigned short maximum_mv,
+ unsigned short minimum_mv);
+#if IS_BCMCHIP(4908)
+int RecloseAVS(int iscold);
+#endif
+void WaitPmc(int runState, void* pmc_log);
+#if IS_BCMCHIP(63138) || IS_BCMCHIP(63148) || IS_BCMCHIP(6858) || \
+ IS_BCMCHIP(4908)
+int StallPmc(void);
+int UnstallPmc(void);
+#endif
+#if IS_BCMCHIP(6856)
+int GetAllROs(uint32_t pa);
+#endif
+enum pvtctl_sel {
+ kTEMPERATURE = 0,
+ kV_0p85_0 = 1,
+ kV_0p85_1 = 2,
+ kV_VIN = 3,
+ kV_1p00_1 = 4,
+ kV_1p80 = 5,
+ kV_3p30 = 6,
+ kTEST = 7,
+};
+int pmc_convert_pvtmon(int sel, int value);
+int pmc_get_tracktemp(int *status);
+int pmc_set_tracktemp(int enable);
+#endif //_LANGUAGE_ASSEMBLY
+
+#endif // PMC_DRV_H
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_drv_special.h b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_drv_special.h
new file mode 100644
index 0000000000..b182dd6327
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/include/pmc_drv_special.h
@@ -0,0 +1,128 @@
+/*
+<:copyright-BRCM:2019:DUAL/GPL:standard
+
+ Copyright (c) 2019 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+*/
+
+/*****************************************************************************
+ * Description:
+ * This contains special header for different flavors of PMC drivers.
+ *****************************************************************************/
+
+#ifndef PMC_DRV_SPECIAL_H__
+#define PMC_DRV_SPECIAL_H__
+
+#if defined(__KERNEL__) || defined(_ATF_)
+#define CFG_RAMAPP
+#endif
+
+#include "bcm_map_part.h"
+#include "bcm_mem_reserve.h"
+
+#ifndef IS_BCMCHIP
+#define IS_BCMCHIP(num) (defined(_BCM9##num##_) || \
+ defined(CONFIG_BCM9##num) || defined(CONFIG_BCM##num))
+#endif
+
+#if IS_BCMCHIP(63138)
+#include "pmc_addr_63138.h"
+#elif IS_BCMCHIP(63148)
+#include "pmc_addr_63148.h"
+#elif IS_BCMCHIP(6858)
+#include "pmc_addr_6858.h"
+#elif IS_BCMCHIP(6846)
+#include "pmc_addr_6846.h"
+#elif IS_BCMCHIP(6878)
+#include "pmc_addr_6878.h"
+#elif IS_BCMCHIP(4908)
+#include "pmc_addr_4908.h"
+#elif IS_BCMCHIP(63158)
+#include "pmc_addr_63158.h"
+#elif IS_BCMCHIP(63178)
+#include "pmc_addr_63178.h"
+#elif IS_BCMCHIP(47622)
+#include "pmc_addr_47622.h"
+#elif IS_BCMCHIP(6856)
+#include "pmc_addr_6856.h"
+#elif IS_BCMCHIP(63146)
+#include "pmc_addr_63146.h"
+#elif IS_BCMCHIP(4912)
+#include "pmc_addr_4912.h"
+#elif IS_BCMCHIP(6855)
+#include "pmc_addr_6855.h"
+#elif IS_BCMCHIP(6756)
+#include "pmc_addr_6756.h"
+#endif
+
+#ifndef __ASSEMBLER__
+#if defined(_CFE_) && !defined(_ATF_)
+#include "lib_printf.h"
+#include "lib_types.h"
+#include "lib_string.h"
+#include "cfe_iocb.h"
+#include "bsp_config.h"
+#include "bcm63xx_util.h"
+#include "shared_utils.h"
+
+#define MAX_PMC_ROM_SIZE 0x8000
+#define MAX_PMC_LOG_SIZE 0x8000
+
+#if defined(_BCM963158_) && !defined(CONFIG_BRCM_IKOS)
+#define PMC_SHARED_MEMORY 0x80204000
+
+#if MAX_PMC_ROM_SIZE + MAX_PMC_LOG_SIZE > CFG_BOOT_PMC_SIZE
+#error ROM and LOG buffer size needs to be re-adjusted
+#endif
+#endif /* _BCM963158_ */
+
+extern void _cfe_flushcache(int, uint8_t *, uint8_t *);
+extern int getAVSConfig(void);
+#define is_pmcfw_code_loaded(void) (0)
+#define is_pmcfw_data_loaded(void) (0)
+#endif /* _CFE_ */
+
+#ifdef __KERNEL__
+#include <linux/module.h>
+#include <linux/delay.h>
+void pmc_spin_lock(void);
+void pmc_spin_unlock(void);
+#if defined(CONFIG_BCM96878) || defined(CONFIG_BCM96855)
+void keyhole_spin_lock(void);
+void keyhole_spin_unlock(void);
+#endif
+#else // #ifdef __KERNEL__
+#ifndef EXPORT_SYMBOL
+#define EXPORT_SYMBOL(a)
+#endif
+#define pmc_spin_lock(...) do { } while (0)
+#define pmc_spin_unlock(...) do { } while (0)
+#if defined(CONFIG_BCM96878) || defined(CONFIG_BCM96855)
+#define keyhole_spin_lock(...) do { } while (0)
+#define keyhole_spin_unlock(...) do { } while (0)
+#endif
+#define printk printf
+
+#ifndef phys_to_virt
+#define phys_to_virt(a) (a)
+#endif
+#endif // #ifdef __KERNEL__
+#endif // #ifndef __ASSEMBLER__
+
+#endif // #ifndef PMC_DRV_SPECIAL_H__
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/platform.mk b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/platform.mk
new file mode 100644
index 0000000000..76873c6a12
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/platform.mk
@@ -0,0 +1,88 @@
+include lib/libfdt/libfdt.mk
+
+PLAT_INCLUDES := -Iinclude/plat/arm/common/ \
+ -Iinclude/plat/common/ \
+ -Iinclude/plat/arm/common/aarch64/ \
+ -Iplat/bcm/include \
+ -Iplat/bcm/include/bcm963xx \
+ -Iplat/bcm/drivers \
+ -Iinclude/drivers/ \
+ -Iinclude/drivers/arm/ \
+ -Iinclude/common/ \
+ -Iinclude/common/tbbr \
+ -Iinclude/lib/ \
+ -Iinclude/lib/psci/ \
+ -Iinclude/bl31/
+
+
+ifeq ($(strip $(KERNEL_ARCH)),arm)
+PLAT_BL_A9_SOURCE := plat/bcm/aarch32/pl310_a32.S \
+ plat/bcm/aarch32/cortexa9_mmu.S
+
+PLAT_BL_COMMON_SOURCES := drivers/arm/gic/v2/gicv2_helpers.c \
+ drivers/arm/gic/v2/gicv2_main.c \
+ drivers/arm/gic/common/gic_common.c \
+ drivers/arm/pl011/aarch32/pl011_console.S \
+ drivers/delay_timer/delay_timer.c \
+ drivers/delay_timer/generic_delay_timer.c \
+ lib/xlat_tables/xlat_tables_common.c \
+ lib/xlat_tables/aarch32/xlat_tables.c \
+ plat/common/plat_psci_common.c \
+ plat/common/aarch32/platform_mp_stack.S \
+ plat/bcm/aarch32/plat_helpers.S \
+ plat/arm/common/aarch32/arm_helpers.S \
+ plat/arm/common/arm_common.c \
+ plat/bcm/brcm_bl32_setup.c \
+ plat/bcm/brcm_pm.c \
+ plat/bcm/topology.c \
+ plat/bcm/drivers/pmc_drv.c \
+ plat/bcm/drivers/pmc_cpu_core.c \
+ plat/bcm/sp_min/src/opteed_main.c \
+ plat/bcm/aarch32/opteed_helper.S
+
+ifeq ($(strip $(BRCM_CHIP)),63138)
+PLAT_BL_COMMON_SOURCES += $(PLAT_BL_A9_SOURCE)
+# following is needed to compile out code that A9 does not support
+PL011_GENERIC_UART := 1
+endif
+
+else
+PLAT_BL_COMMON_SOURCES := drivers/arm/pl011/aarch64/pl011_console.S \
+ lib/xlat_tables/xlat_tables_common.c \
+ lib/xlat_tables/aarch64/xlat_tables.c
+
+BL31_SOURCES += \
+ lib/cpus/aarch64/cortex_a53.S \
+ drivers/arm/gic/v2/gicv2_helpers.c \
+ drivers/arm/gic/v2/gicv2_main.c \
+ drivers/arm/gic/common/gic_common.c \
+ plat/common/plat_psci_common.c \
+ plat/bcm/brcm_pm.c \
+ plat/bcm/topology.c \
+ plat/bcm/aarch64/plat_helpers.S \
+ plat/bcm/brcm_bl31_setup.c \
+ plat/bcm/bcm_gic.c \
+ plat/bcm/drivers/pmc_drv.c \
+ plat/bcm/drivers/pmc_cpu_core.c \
+ plat/arm/common/arm_common.c \
+ drivers/delay_timer/delay_timer.c \
+ drivers/delay_timer/generic_delay_timer.c
+endif
+
+override WARMBOOT_ENABLE_DCACHE_EARLY := 1
+override PROGRAMMABLE_RESET_ADDRESS := 1
+
+# Disable the PSCI platform compatibility layer
+ENABLE_PLAT_COMPAT := 0
+
+BL32_RAM_LOCATION := tdram
+ifeq (${BL32_RAM_LOCATION}, tsram)
+ BL32_RAM_LOCATION_ID = SEC_SRAM_ID
+else ifeq (${BL32_RAM_LOCATION}, tdram)
+ BL32_RAM_LOCATION_ID = SEC_DRAM_ID
+else
+ $(error "Unsupported BL32_RAM_LOCATION value")
+endif
+
+# Process flags
+$(eval $(call add_define,BL32_RAM_LOCATION_ID))
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/sp_min/sp_min-bcm.mk b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/sp_min/sp_min-bcm.mk
new file mode 100644
index 0000000000..68dab90f69
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/sp_min/sp_min-bcm.mk
@@ -0,0 +1 @@
+LOAD_IMAGE_V2 := 1
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/sp_min/src/opteed_main.c b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/sp_min/src/opteed_main.c
new file mode 100644
index 0000000000..48f7df9859
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/sp_min/src/opteed_main.c
@@ -0,0 +1,210 @@
+/*
+<:copyright-BRCM:2019:DUAL/GPL:standard
+
+ Copyright (c) 2019 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+*/
+#if defined(SPD_opteed)
+#include <arch_helpers.h>
+#include <assert.h>
+#include <bl_common.h>
+#include <debug.h>
+#include <errno.h>
+#include <platform.h>
+#include <runtime_svc.h>
+#include <stddef.h>
+#include <arch.h>
+
+static volatile uint32_t optee_smc_entry = 0;
+
+static uint32_t monitor_stack_pointer [PLATFORM_MAX_CPUS_PER_CLUSTER];
+static uint32_t optee_params_register [PLATFORM_MAX_CPUS_PER_CLUSTER][8];
+
+extern void save_atf_sysreg(void);
+extern void restore_atf_sysreg(void);
+
+__attribute__((naked)) void opteed_jump(uint32_t jump, uint32_t *monitor_stack, uint32_t *params)
+{
+ /* Save all GP registers */
+ asm("push {r0-r12, r14}");
+
+ /* Find OPTEE's entry address and place to save ATF's monitor stack*/
+ asm volatile ("mov r10, %0" "\n\t"
+ "mov r11, %1" "\n\t"
+ "mov r12, %2" "\n\t"
+ : : "r" (params), "r" (monitor_stack), "r" (jump));
+
+ /* Save ATF's monitor's stack in cache memory */
+ asm("str sp, [r11]");
+ save_atf_sysreg();
+
+ /* Load OPTEE's parameters */
+ asm("ldm r10, {r0-r7}");
+
+ /* Turn off MMU and Cache needed to initialize OPTEE */
+ asm("mrc p15, 0, r8, c1, c0, 0");
+ asm("bic r8, r8, #0x5"); // (SCTLR_M_BIT | SCTLR_C_BIT) = 0x5
+ asm("mcr p15, 0, r8, c1, c0, 0");
+
+ /* Save ATF's monitor's stack in non-cache memory */
+ asm("str sp, [r11]");
+ save_atf_sysreg();
+
+ /* Jump to OPTEE */
+ asm("cps #0x13"); // switch to secure MODE_SVC mode (0x13)
+ asm("blx r12");
+ asm("nop");
+ /* Returned from OPTEE with OPTEE's smc entry point in r12. ** DO NOT corrupt r12 ** */
+
+ /* Load ATF's monitor stack from non-cached memory */
+ asm("ldr r9,=monitor_stack_pointer");
+ /* Point to the monitor stack pointer for this CPU */
+ asm("mrc p15, 0, r10, c0, c0, 5");
+ asm("and r10, r10, #0xff");
+ asm("lsl r10, r10, #2");
+ asm("add r9, r10, r9");
+ asm("ldr sp, [r9]");
+
+ /* Restore ATF's system registers */
+ restore_atf_sysreg();
+
+ /* Turn ON MMU */
+ asm("mrc p15, 0, r8, c1, c0, 0");
+ asm("ldr r9,=0x5"); // SCTLR_M_BIT | SCTLR_C_BIT
+ asm("orr r8, r8, r9");
+ asm("mcr p15, 0, r8, c1, c0, 0");
+ asm("nop");
+ asm("nop");
+ /* Save optee's SMC entry in cached memory */
+ asm("ldr r8,=optee_smc_entry");
+ asm("str r12,[r8]");
+ /* Save the OPTEE's return registers r0-r7 in cached memory */
+ asm("ldr r8,=optee_params_register");
+ asm("lsl r10, r10, #3");
+ asm("add r8, r10, r8");
+ asm("stm r8, {r0-r7}");
+ /* Restore all GP registers */
+ asm("pop {r0-r12, r14}");
+ asm("bx lr");
+}
+
+/*******************************************************************************
+ * OPTEE Dispatcher setup. The OPTEED finds out the OPTEE entrypoint and type
+ * (aarch32/aarch64) if not already known and initialises the context for entry
+ * into OPTEE for its initialization.
+ ******************************************************************************/
+int32_t opteed_setup(void)
+{
+ entry_point_info_t *optee_ep_info;
+ uint32_t cpu_id = plat_my_core_pos();
+ uint32_t *monitor_stack = &monitor_stack_pointer[cpu_id];
+ uint32_t *optee_params = &optee_params_register[cpu_id][0];
+ /*
+ * Get information about the Secure Payload (BL32) image. Its
+ * absence is a critical failure. TODO: Add support to
+ * conditionally include the SPD service
+ */
+
+ optee_ep_info = bl31_plat_get_next_image_ep_info(SECURE);
+ if (!optee_ep_info) {
+ WARN("No OPTEE provided by BL2 boot loader, Booting device"
+ " without OPTEE initialization. SMC`s destined for OPTEE"
+ " will return SMC_UNK\n");
+ return 1;
+ }
+
+ /*
+ * If there's no valid entry point for SP, we return a non-zero value
+ * signalling failure initializing the service. We bail out without
+ * registering any handlers
+ */
+ if (!optee_ep_info->pc)
+ return 1;
+
+ opteed_jump(optee_ep_info->pc, monitor_stack, optee_params);
+
+ return 0;
+}
+
+
+
+/*******************************************************************************
+ * This function is responsible for handling all SMCs in the Trusted OS/App
+ * range from the non-secure state as defined in the SMC Calling Convention
+ * Document. It is also responsible for communicating with the Secure
+ * payload to delegate work and return results back to the non-secure
+ * state. Lastly it will also return any information that OPTEE needs to do
+ * the work assigned to it.
+ ******************************************************************************/
+ uintptr_t opteed_smc_handler(uint32_t smc_fid,
+ u_register_t x1,
+ u_register_t x2,
+ u_register_t x3,
+ u_register_t x4,
+ void *cookie,
+ void *handle,
+ u_register_t flags)
+{
+ uint32_t cpu_id = plat_my_core_pos();
+ uint32_t *monitor_stack = &monitor_stack_pointer[cpu_id];
+ uint32_t *optee_params = &optee_params_register[cpu_id][0];
+ cookie = cookie;
+ handle = handle;
+ flags = flags;
+
+ /* Extract r0-r7 from saved context and pass to OPTEE */
+ optee_params[0] = ((smc_ctx_t *)handle)->r0; // smc_fid;
+ optee_params[1] = ((smc_ctx_t *)handle)->r1; // x1;
+ optee_params[2] = ((smc_ctx_t *)handle)->r2; // x2;
+ optee_params[3] = ((smc_ctx_t *)handle)->r3; // x3;
+ optee_params[4] = ((smc_ctx_t *)handle)->r4; // x4;
+ optee_params[5] = ((smc_ctx_t *)handle)->r5;
+ optee_params[6] = ((smc_ctx_t *)handle)->r6;
+ optee_params[7] = ((smc_ctx_t *)handle)->r7;
+
+ assert(optee_params[0] == smc_fid);
+
+ opteed_jump(optee_smc_entry, monitor_stack, optee_params);
+
+ /* Return the response from OPTEE */
+ SMC_RET4(handle, optee_params[0], optee_params[1], optee_params[2], optee_params[3]);
+}
+
+/* Define an OPTEED runtime service descriptor for fast SMC calls */
+DECLARE_RT_SVC(
+ opteed_fast,
+
+ OEN_TOS_START,
+ OEN_TOS_END,
+ SMC_TYPE_FAST,
+ opteed_setup,
+ opteed_smc_handler
+ );
+
+/* Define an OPTEED runtime service descriptor for yielding SMC calls */
+DECLARE_RT_SVC(
+ opteed_std,
+
+ OEN_TOS_START,
+ OEN_TOS_END,
+ SMC_TYPE_YIELD,
+ NULL,
+ opteed_smc_handler
+);
+#endif
diff --git a/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/topology.c b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/topology.c
new file mode 100644
index 0000000000..50ff110609
--- /dev/null
+++ b/package/boot/arm-trusted-firmware-bcm63xx/src-custom/plat/bcm/topology.c
@@ -0,0 +1,74 @@
+/*
+<:copyright-BRCM:2012:DUAL/GPL:standard
+
+ Copyright (c) 2012 Broadcom
+ All Rights Reserved
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as published by
+the Free Software Foundation (the "GPL").
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+
+A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php, or by
+writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA.
+
+:>
+*/
+
+#include <arch.h>
+#include <platform_def.h>
+#include "bcm_private.h"
+
+/* The power domain tree descriptor */
+static unsigned char power_domain_tree_desc[] = {
+ /* Number of root nodes */
+ PLATFORM_CLUSTER_COUNT,
+ /* Number of children for the first node */
+ PLATFORM_CLUSTER0_CORE_COUNT,
+ /* Number of children for the second node */
+ PLATFORM_CLUSTER1_CORE_COUNT,
+};
+
+/*******************************************************************************
+ * This function returns the ARM default topology tree information.
+ ******************************************************************************/
+const unsigned char *plat_get_power_domain_tree_desc(void)
+{
+ return power_domain_tree_desc;
+}
+
+/*******************************************************************************
+ * This function implements a part of the critical interface between the psci
+ * generic layer and the platform that allows the former to query the platform
+ * to convert an MPIDR to a unique linear index. An error code (-1) is returned
+ * in case the MPIDR is invalid.
+ ******************************************************************************/
+int plat_core_pos_by_mpidr(u_register_t mpidr)
+{
+ unsigned int cluster_id, cpu_id;
+
+ mpidr &= MPIDR_AFFINITY_MASK;
+ if (mpidr & ~(MPIDR_CLUSTER_MASK | MPIDR_CPU_MASK))
+ return -1;
+
+ cluster_id = (mpidr >> MPIDR_AFF1_SHIFT) & MPIDR_AFFLVL_MASK;
+ cpu_id = (mpidr >> MPIDR_AFF0_SHIFT) & MPIDR_AFFLVL_MASK;
+
+ if (cluster_id >= PLATFORM_CLUSTER_COUNT)
+ return -1;
+
+ if (cpu_id >= PLATFORM_MAX_CPUS_PER_CLUSTER)
+ return -1;
+
+ return plat_bcm_calc_core_pos(mpidr);
+}
+
+/* Needed for floating point lib */
+void raise (void) { asm("b ."); }
+
--
2.31.1
More information about the openwrt-devel
mailing list