[PATCH 03/13] realtek: remove hardcoded sys-led configurations

[Sander Vanheule]

Disabling the sys-led peripheral should be done via a pin controller,
for which pinctrl-single nodes are present in the platform DTSI files.
Drop the hardcoded per-platform sys-led configurations, and require
things to be set up in the devicetree.

Co-developed-by: INAGAKI Hiroshi <musashino.open at gmail.com>
Signed-off-by: INAGAKI Hiroshi <musashino.open at gmail.com>
Signed-off-by: Sander Vanheule <sander at svanheule.net>
---
 .../files-5.10/arch/mips/rtl838x/setup.c      | 40 -------------------
 1 file changed, 40 deletions(-)

diff --git a/target/linux/realtek/files-5.10/arch/mips/rtl838x/setup.c b/target/linux/realtek/files-5.10/arch/mips/rtl838x/setup.c
index 55419c7b0b7a..df29b76bbf0f 100644
--- a/target/linux/realtek/files-5.10/arch/mips/rtl838x/setup.c
+++ b/target/linux/realtek/files-5.10/arch/mips/rtl838x/setup.c
@@ -28,31 +28,6 @@
 
 extern struct rtl83xx_soc_info soc_info;
 
-static void __init rtl838x_setup(void)
-{
-	/* Setup System LED. Bit 15 then allows to toggle it */
-	sw_w32_mask(0, 3 << 16, RTL838X_LED_GLB_CTRL);
-}
-
-static void __init rtl839x_setup(void)
-{
-	/* Setup System LED. Bit 14 of RTL839X_LED_GLB_CTRL then allows to toggle it */
-	sw_w32_mask(0, 3 << 15, RTL839X_LED_GLB_CTRL);
-}
-
-static void __init rtl930x_setup(void)
-{
-	if (soc_info.id == 0x9302)
-		sw_w32_mask(0, 3 << 13, RTL9302_LED_GLB_CTRL);
-	else
-		sw_w32_mask(0, 3 << 13, RTL930X_LED_GLB_CTRL);
-}
-
-static void __init rtl931x_setup(void)
-{
-	sw_w32_mask(0, 3 << 12, RTL931X_LED_GLB_CTRL);
-}
-
 void __init plat_mem_setup(void)
 {
 	void *dtb;
@@ -71,21 +46,6 @@ void __init plat_mem_setup(void)
 	 * parsed resulting in our memory appearing
 	 */
 	__dt_setup_arch(dtb);
-
-	switch (soc_info.family) {
-	case RTL8380_FAMILY_ID:
-		rtl838x_setup();
-		break;
-	case RTL8390_FAMILY_ID:
-		rtl839x_setup();
-		break;
-	case RTL9300_FAMILY_ID:
-		rtl930x_setup();
-		break;
-	case RTL9310_FAMILY_ID:
-		rtl931x_setup();
-		break;
-	}
 }
 
 void __init plat_time_init(void)
-- 
2.33.1