[PATCH 4/8] at91: use make kernel_menuconfig and save for sam9x kernel config

Hauke Mehrtens hauke at hauke-m.de
Sun Aug 22 04:56:16 PDT 2021


On 8/20/21 1:42 PM, Claudiu Beznea wrote:
> Use kernel_menuconfig and save for sam9x kernel config.

Is the result of this command the same? (executed with the sam9x and the 
sama5 sub target selected)
   make kernel_oldconfig CONFIG_TARGET=subtarget
This would run an oldconfig using the subtarget config.

I would prefer if you just squash the refresh of the kernel 
configuration into the "at91: kernel: bump to 5.10" so that the system 
is still building and booting after the first patch.

Hauke

> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea at microchip.com>
> ---
>   target/linux/at91/sam9x/config-default | 61 +-------------------------
>   1 file changed, 1 insertion(+), 60 deletions(-)
> 
> diff --git a/target/linux/at91/sam9x/config-default b/target/linux/at91/sam9x/config-default
> index d0a1cbc0a45b..ebfd38d131db 100644
> --- a/target/linux/at91/sam9x/config-default
> +++ b/target/linux/at91/sam9x/config-default
> @@ -1,22 +1,6 @@
>   CONFIG_ALIGNMENT_TRAP=y
>   CONFIG_ARCH_32BIT_OFF_T=y
>   CONFIG_ARCH_CLOCKSOURCE_DATA=y
> -CONFIG_ARCH_HAS_BINFMT_FLAT=y
> -CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
> -CONFIG_ARCH_HAS_DMA_WRITE_COMBINE=y
> -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
> -CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
> -CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
> -CONFIG_ARCH_HAS_KCOV=y
> -CONFIG_ARCH_HAS_KEEPINITRD=y
> -CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
> -CONFIG_ARCH_HAS_PHYS_TO_DMA=y
> -CONFIG_ARCH_HAS_SETUP_DMA_OPS=y
> -CONFIG_ARCH_HAS_SET_MEMORY=y
> -CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
> -CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
> -CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS=y
> -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
>   CONFIG_ARCH_HIBERNATION_POSSIBLE=y
>   CONFIG_ARCH_KEEP_MEMBLOCK=y
>   CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
> @@ -27,14 +11,7 @@ CONFIG_ARCH_MULTI_V4_V5=y
>   CONFIG_ARCH_MULTI_V5=y
>   CONFIG_ARCH_NR_GPIO=0
>   CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
> -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
> -CONFIG_ARCH_SUPPORTS_UPROBES=y
>   CONFIG_ARCH_SUSPEND_POSSIBLE=y
> -CONFIG_ARCH_USE_BUILTIN_BSWAP=y
> -CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
> -CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y
> -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
> -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
>   CONFIG_ARM=y
>   CONFIG_ARM_HAS_SG_CHAIN=y
>   CONFIG_ARM_L1_CACHE_SHIFT=5
> @@ -43,7 +20,6 @@ CONFIG_ARM_THUMB=y
>   CONFIG_ARM_UNWIND=y
>   CONFIG_AUTO_ZRELADDR=y
>   CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
> -CONFIG_CC_HAS_KASAN_GENERIC=y
>   CONFIG_CLKDEV_LOOKUP=y
>   CONFIG_CLONE_BACKWARDS=y
>   CONFIG_COMMON_CLK=y
> @@ -98,42 +74,6 @@ CONFIG_HARDIRQS_SW_RESEND=y
>   CONFIG_HAS_DMA=y
>   CONFIG_HAS_IOMEM=y
>   CONFIG_HAS_IOPORT_MAP=y
> -CONFIG_HAVE_ARCH_AUDITSYSCALL=y
> -CONFIG_HAVE_ARCH_JUMP_LABEL=y
> -CONFIG_HAVE_ARCH_KGDB=y
> -CONFIG_HAVE_ARCH_PFN_VALID=y
> -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
> -CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
> -CONFIG_HAVE_ARCH_TRACEHOOK=y
> -CONFIG_HAVE_CLK=y
> -CONFIG_HAVE_CLK_PREPARE=y
> -CONFIG_HAVE_CONTEXT_TRACKING=y
> -CONFIG_HAVE_COPY_THREAD_TLS=y
> -CONFIG_HAVE_C_RECORDMCOUNT=y
> -CONFIG_HAVE_DEBUG_KMEMLEAK=y
> -CONFIG_HAVE_DMA_CONTIGUOUS=y
> -CONFIG_HAVE_DYNAMIC_FTRACE=y
> -CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
> -CONFIG_HAVE_EBPF_JIT=y
> -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
> -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
> -CONFIG_HAVE_FUNCTION_TRACER=y
> -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
> -CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
> -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
> -CONFIG_HAVE_NET_DSA=y
> -CONFIG_HAVE_OPROFILE=y
> -CONFIG_HAVE_OPTPROBES=y
> -CONFIG_HAVE_PCI=y
> -CONFIG_HAVE_PERF_EVENTS=y
> -CONFIG_HAVE_PERF_REGS=y
> -CONFIG_HAVE_PERF_USER_STACK_DUMP=y
> -CONFIG_HAVE_PROC_CPU=y
> -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
> -CONFIG_HAVE_RSEQ=y
> -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
> -CONFIG_HAVE_UID16=y
> -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
>   CONFIG_HZ_FIXED=0
>   CONFIG_HZ_PERIODIC=y
>   CONFIG_INITRAMFS_SOURCE=""
> @@ -144,6 +84,7 @@ CONFIG_IRQ_WORK=y
>   CONFIG_LIBFDT=y
>   CONFIG_LOCK_DEBUGGING_SUPPORT=y
>   CONFIG_MEMFD_CREATE=y
> +# CONFIG_MICROCHIP_PIT64B is not set
>   CONFIG_MIGRATION=y
>   CONFIG_MMC=y
>   CONFIG_MMC_BLOCK=y
> 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: OpenPGP_0x93DD20630910B515.asc
Type: application/pgp-keys
Size: 13571 bytes
Desc: OpenPGP public key
URL: <http://lists.openwrt.org/pipermail/openwrt-devel/attachments/20210822/0f16c33d/attachment-0001.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: OpenPGP_signature
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.openwrt.org/pipermail/openwrt-devel/attachments/20210822/0f16c33d/attachment-0001.sig>


More information about the openwrt-devel mailing list