[PATCH 2/8] mvebu: sysupgrade: use v function for writing logs

Adrian Schmutzler mail at adrianschmutzler.de
Wed Nov 25 12:21:50 EST 2020


Hi,

> -----Original Message-----
> From: openwrt-devel [mailto:openwrt-devel-bounces at lists.openwrt.org]
> On Behalf Of Tomasz Maciej Nowak
> Sent: Mittwoch, 25. November 2020 17:34
> To: openwrt-devel at lists.openwrt.org
> Subject: [PATCH 2/8] mvebu: sysupgrade: use v function for writing logs
> 
> Signed-off-by: Tomasz Maciej Nowak <tmn505 at gmail.com>

would you please add a commit message for this one and resend it?

You may just send this one without the rest of the patches, I will pick it then. (Just going through the rest at the moment, will probably take most/all of it as well.)

Or, if you prefer, just send the commit message as an answer to this mail and I will insert it.

Best

Adrian

> ---
>  target/linux/mvebu/base-files/lib/upgrade/sdcard.sh  | 12 ++++++------
> .../mvebu/cortexa9/base-files/lib/upgrade/linksys.sh |  2 +-
>  2 files changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/target/linux/mvebu/base-files/lib/upgrade/sdcard.sh
> b/target/linux/mvebu/base-files/lib/upgrade/sdcard.sh
> index d16ddc500079..f189c240cf09 100644
> --- a/target/linux/mvebu/base-files/lib/upgrade/sdcard.sh
> +++ b/target/linux/mvebu/base-files/lib/upgrade/sdcard.sh
> @@ -3,7 +3,7 @@ platform_check_image_sdcard() {
>  	local magic diskdev partdev diff
> 
>  	export_bootdevice && export_partdevice diskdev 0 || {
> -		echo "Unable to determine upgrade device"
> +		v "Unable to determine upgrade device"
>  	return 1
>  	}
> 
> @@ -20,7 +20,7 @@ platform_check_image_sdcard() {
>  	rm -f /tmp/image.bs /tmp/partmap.bootdisk /tmp/partmap.image
> 
>  	if [ -n "$diff" ]; then
> -		echo "Partition layout has changed. Full image will be
> written."
> +		v "Partition layout has changed. Full image will be written."
>  		ask_bool 0 "Abort" && exit 1
>  		return 0
>  	fi
> @@ -31,7 +31,7 @@ platform_do_upgrade_sdcard() {
>  	local diskdev partdev diff
> 
>  	export_bootdevice && export_partdevice diskdev 0 || {
> -		echo "Unable to determine upgrade device"
> +		v "Unable to determine upgrade device"
>  	return 1
>  	}
> 
> @@ -64,15 +64,15 @@ platform_do_upgrade_sdcard() {
>  		#iterate over each partition from the image and write it to the
> boot disk
>  		while read part start size; do
>  			if export_partdevice partdev $part; then
> -				echo "Writing image to /dev/$partdev..."
> +				v "Writing image to /dev/$partdev..."
>  				get_image "$@" | dd of="/dev/$partdev"
> ibs="512" obs=1M skip="$start" count="$size" conv=fsync
>  			else
> -				echo "Unable to find partition $part device,
> skipped."
> +				v "Unable to find partition $part device,
> skipped."
>  			fi
>  		done < /tmp/partmap.image
> 
>  		#copy partition uuid
> -		echo "Writing new UUID to /dev/$diskdev..."
> +		v "Writing new UUID to /dev/$diskdev..."
>  		get_image "$@" | dd of="/dev/$diskdev" bs=1 skip=440
> count=4 seek=440 conv=fsync
>  	fi
> 
> diff --git a/target/linux/mvebu/cortexa9/base-files/lib/upgrade/linksys.sh
> b/target/linux/mvebu/cortexa9/base-files/lib/upgrade/linksys.sh
> index 6ccfdd0768da..c5da471d76f1 100644
> --- a/target/linux/mvebu/cortexa9/base-files/lib/upgrade/linksys.sh
> +++ b/target/linux/mvebu/cortexa9/base-files/lib/upgrade/linksys.sh
> @@ -57,7 +57,7 @@ platform_do_upgrade_linksys() {
> 
>  	if [ ! -n "$part_label" ]
>  	then
> -		echo "cannot find target partition"
> +		v "cannot find target partition"
>  		exit 1
>  	fi
> 
> --
> 2.29.2
> 
> 
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
-------------- next part --------------
A non-text attachment was scrubbed...
Name: openpgp-digital-signature.asc
Type: application/pgp-signature
Size: 834 bytes
Desc: not available
URL: <http://lists.openwrt.org/pipermail/openwrt-devel/attachments/20201125/17b1d76b/attachment.sig>


More information about the openwrt-devel mailing list