[OpenWrt-Devel] [PATCH 3/3] imx6: apalis: move set_blkcnt variable into recovery script

Petr Štetiar ynezz at true.cz
Mon Mar 2 12:42:56 EST 2020

I've added `set_blkcnt` environment variable which is needed for every
`mmc write` command as we need to always specify size in block count.

That `set_blkcnt` variable was previously present in the U-Boot's
default environment, but that needed patching U-Boot every time, so that
patch was dropped with 2020.01 version bump.

Signed-off-by: Petr Štetiar <ynezz at true.cz>
 target/linux/imx6/image/recovery-apalis | 1 +
 1 file changed, 1 insertion(+)

diff --git a/target/linux/imx6/image/recovery-apalis b/target/linux/imx6/image/recovery-apalis
index c1c5a3f5d62f..d75b95434587 100644
--- a/target/linux/imx6/image/recovery-apalis
+++ b/target/linux/imx6/image/recovery-apalis
@@ -4,6 +4,7 @@ mmc dev 0 1
 mmc write 0x12100000 0x2 0x800
 # flash openwrt-imx6-apalis-squashfs.combined.bin
+setenv set_blkcnt 'setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200'
 run set_blkcnt
 mmc dev 0 0
 mmc write 0x12500000 0 ${blkcnt}

openwrt-devel mailing list
openwrt-devel at lists.openwrt.org

More information about the openwrt-devel mailing list