[OpenWrt-Devel] [PATCH v2 0/3] ath79: add support for D-Link DAP-2695-A1

[Stijn Tintel]

This series adds support for the D-Link DAP-2695-A1 to the ath79 target.
Also available in the ath79_dap-2695-a1 branch of my staging tree at [0].

Successfully tested sysupgrade from ar71xx to ath79.

As discussed on IRC, I prefer to keep the network setup identical to
ar71xx, so this wasn't changed.

Changes since v1:

* Drop the commit that put D-Link images definitions in a separate file,
  to focus on getting support for the device in order rather than
  wasting time over something cosmetic.
* Drop default-state = "off" from leds, set default-state = "on" for
  power LED, add aliases indicating boot, failsafe and upgrade, add
  linux,default-trigger = "phy1tpt" to wlan2g.
* Rename wifi_2g node to be consistent with the label.
* Use gpio-keys instead of gpio-keys-polled.
* Rename button node to reset.
* Add newline before partitions node.
* Drop uboot label.
* Drop board from /etc/board.d/01_leds.
* Add ath10k-ct and firmware to DEFAULT_PACKAGES.

[0] https://git.openwrt.org/?p=openwrt/staging/stintel.git;a=summary

Stijn Tintel (3):
  mtd: enable wrgg support for ath79
  ath79: enable wrgg MTD splitter
  ath79: add support for D-Link DAP-2695-A1

 package/system/mtd/src/Makefile               |   2 +-
 target/linux/ath79/config-4.19                |   1 +
 target/linux/ath79/config-5.4                 |   1 +
 .../ath79/dts/qca9558_dlink_dap-2695-a1.dts   | 178 ++++++++++++++++++
 .../generic/base-files/etc/board.d/02_network |   6 +
 .../etc/hotplug.d/firmware/10-ath9k-eeprom    |   4 +
 .../etc/hotplug.d/firmware/11-ath10k-caldata  |   4 +
 .../etc/uci-defaults/09_fix-checksum          |   8 +
 .../base-files/lib/preinit/10_fix_eth_mac.sh  |   4 +
 target/linux/ath79/image/generic.mk           |  33 ++++
 10 files changed, 240 insertions(+), 1 deletion(-)
 create mode 100644 target/linux/ath79/dts/qca9558_dlink_dap-2695-a1.dts

-- 
2.26.2


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel