[OpenWrt-Devel] [PATCH 4/4] bcm63xx: add support for the Sercomm H500-s
Daniel González Cabanelas
dgcbueu at gmail.com
Wed Jun 3 18:48:21 EDT 2020
Sercomm H500-s is an xDSL dual band wireless router based on Broadcom
BCM63167 SoC
Hardware:
SoC: Broadcom BCM63167
CPU: BMIPS4350 V8.0, 400 MHz, 2 cores
Flash: NAND 128 MiB
RAM: DDR3 128 MiB
Ethernet: 4x 10/100/1000 Mbps
Switch: BCM53134S
Wireless: 802.11b/g/n: BCM435f (integrated)
802.11ac: Quantenna QT3740BC (onboard SoC)
USB: 1x 2.0
LEDs/Buttons: 11x / 2x
Flash instruction, web UI:
1. Reset to defaults using the reset button if the admin password is
unknown
2. Login into the web UI as admin.
Address: http://192.168.0.1
User: admin
Password: VF-ESad1018
3. Go to Settings -> Firmware Update, and select the Openwrt factory
firmware
4. Update the firmware.
5. Wait until it finish, the device will reboot with Openwrt installed
on the alternative image partitions keeping the stock firmware in
the former.
Notes:
- The patch also adds support for the lowi version. Only the factory
firmware is different.
- The integrated Wifi in the Broadcom Soc isn't still supported.
- The Quantenna 802.11ac wifi works ok, but needs to be configured with
the Quantenna client application. It can't be configured with Luci
nor any iw command since it's a separated subsystem linked via
ethernet.
Signed-off-by: Daniel González Cabanelas <dgcbueu at gmail.com>
---
.../bcm63xx/base-files/etc/board.d/01_leds | 3 +
.../bcm63xx/base-files/etc/board.d/02_network | 3 +
.../base-files/lib/upgrade/platform.sh | 3 +-
.../bcm63xx/dts/bcm63167-sercomm-h500s.dts | 201 ++++++++++++++++++
target/linux/bcm63xx/image/bcm63xx_nand.mk | 53 +++++
.../bcm63xx/patches-5.4/568-board-H500s.patch | 72 +++++++
6 files changed, 334 insertions(+), 1 deletion(-)
create mode 100644 target/linux/bcm63xx/dts/bcm63167-sercomm-h500s.dts
create mode 100644 target/linux/bcm63xx/patches-5.4/568-board-H500s.patch
diff --git a/target/linux/bcm63xx/base-files/etc/board.d/01_leds b/target/linux/bcm63xx/base-files/etc/board.d/01_leds
index 91d67f0c0b..5894108457 100755
--- a/target/linux/bcm63xx/base-files/etc/board.d/01_leds
+++ b/target/linux/bcm63xx/base-files/etc/board.d/01_leds
@@ -100,6 +100,9 @@ sercomm,ad1018)
sercomm,ad1018-nor)
ucidef_set_led_netdev "wlan0" "WLAN" "AD1018:green:wifi" "wlan0"
;;
+sercomm,h500s)
+ ucidef_set_led_netdev "wan" "WAN" "$model:green:internet" "eth0.2"
+ ;;
telsey,cpva502plus)
ucidef_set_led_netdev "lan" "LAN" "CPVA502+:amber:link" "eth0"
;;
diff --git a/target/linux/bcm63xx/base-files/etc/board.d/02_network b/target/linux/bcm63xx/base-files/etc/board.d/02_network
index 784af29cb4..30649b3abe 100755
--- a/target/linux/bcm63xx/base-files/etc/board.d/02_network
+++ b/target/linux/bcm63xx/base-files/etc/board.d/02_network
@@ -142,6 +142,9 @@ sercomm,ad1018-nor)
ucidef_add_switch "switch0" \
"1:lan:3" "2:lan:2" "3:lan:1" "0:wan" "8t at eth0"
;;
+sercomm,h500s)
+ ucidef_add_switch "switch0" "4:lan" "3:wan" "8t at eth0"
+ ;;
sfr,neufbox-6-sercomm-r0)
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9t at eth0"
diff --git a/target/linux/bcm63xx/base-files/lib/upgrade/platform.sh b/target/linux/bcm63xx/base-files/lib/upgrade/platform.sh
index 7d416297dd..cea66f63ef 100644
--- a/target/linux/bcm63xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/bcm63xx/base-files/lib/upgrade/platform.sh
@@ -69,7 +69,8 @@ platform_do_upgrade() {
comtrend,vr-3032u|\
huawei,hg253s-v2|\
netgear,dgnd3700-v2|\
- sercomm,ad1018)
+ sercomm,ad1018|\
+ sercomm,h500s)
REQUIRE_IMAGE_METADATA=1
cfe_jffs2_upgrade_tar "$1"
;;
diff --git a/target/linux/bcm63xx/dts/bcm63167-sercomm-h500s.dts b/target/linux/bcm63xx/dts/bcm63167-sercomm-h500s.dts
new file mode 100644
index 0000000000..5a999ef24e
--- /dev/null
+++ b/target/linux/bcm63xx/dts/bcm63167-sercomm-h500s.dts
@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Sercomm H500-s
+ *
+ * Copyright (C) 2020 Daniel González Cabanelas <dgcbueu at gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm63268.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Sercomm H500-s";
+ compatible = "sercomm,h500s", "brcm,bcm63268";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
+ };
+
+ chosen {
+ bootargs = "rootfstype=squashfs,ubifs noinitrd console=ttyS0,115200";
+ stdout-path = "serial0:115200n8";
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ wps {
+ label = "wps";
+ gpios = <&pinctrl 34 1>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&pinctrl 35 1>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&leds {
+ status = "ok";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds>;
+
+ led at 0 {
+ reg = <0>;
+ label = "h500s:red:mobile";
+ };
+
+ led at 1 {
+ reg = <1>;
+ label = "h500s:green:mobile";
+ };
+
+ led_power_red: led at 8 {
+ reg = <8>;
+ label = "h500s:red:power";
+ };
+
+ led at 9 {
+ reg = <9>;
+ label = "h500s:green:wifi";
+ };
+
+ led at 12 {
+ reg = <12>;
+ label = "h500s:red:phone";
+ };
+
+ led at 13 {
+ reg = <13>;
+ label = "h500s:red:wifi";
+ };
+
+ led at 14 {
+ reg = <14>;
+ label = "h500s:red:internet";
+ };
+
+ led at 15 {
+ reg = <15>;
+ label = "h500s:green:internet";
+ };
+
+ led at 16 {
+ reg = <16>;
+ label = "h500s:green:phone";
+ };
+
+ led_power_green: led at 17 {
+ reg = <17>;
+ label = "h500s:green:power";
+ default-state = "on";
+ };
+
+ led at 23 {
+ reg = <23>;
+ label = "h500s:blue:mobile";
+ };
+};
+
+&nflash {
+ status = "ok";
+
+ nandcs at 0 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand>;
+
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ brcm,nand-oob-sector-size = <64>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "cferom";
+ reg = <0x0000000 0x0020000>; /* 128 KiB */
+ read-only;
+ };
+
+ partition at 20000 {
+ label = "part_map";
+ reg = <0x0020000 0x00a0000>; /* 640 KiB */
+ read-only;
+ };
+
+ partition at c0000 {
+ label = "cferam1";
+ reg = <0x00c0000 0x0140000>; /* 1280 KiB */
+ read-only;
+ };
+
+ partition at 200000 {
+ label = "cferam2";
+ reg = <0x0200000 0x0140000>; /* 1280 KiB */
+ read-only;
+ };
+
+ partition at 6920000 {
+ label = "bootflag1";
+ reg = <0x6920000 0x0140000>; /* 1280 KiB */
+ };
+
+ partition at 6a60000 {
+ label = "bootflag2";
+ reg = <0x6a60000 0x0140000>; /* 1280 KiB */
+ };
+
+ partition at 520000 {
+ compatible = "sercomm,wfi";
+ label = "wfi";
+ reg = <0x0520000 0x6400000>; /* 2 images, 97152 KiB */
+ };
+
+ partition at 6ba0000 {
+ label = "xml_cfg";
+ reg = <0x6ba0000 0x0280000>; /* 2560 KiB */
+ read-only;
+ };
+
+ partition at 6e20000 {
+ label = "app_data";
+ reg = <0x6e20000 0x0280000>; /* 2560 KiB */
+ read-only;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ pinctrl_leds: leds {
+ function = "led";
+ pins = "gpio0", "gpio1", "gpio8", "gpio9",
+ "gpio12", "gpio13", "gpio14", "gpio15",
+ "gpio16", "gpio17", "gpio23";
+ };
+};
+
+&uart0 {
+ status = "ok";
+};
diff --git a/target/linux/bcm63xx/image/bcm63xx_nand.mk b/target/linux/bcm63xx/image/bcm63xx_nand.mk
index 74f23f52af..5cc3f34f0c 100644
--- a/target/linux/bcm63xx/image/bcm63xx_nand.mk
+++ b/target/linux/bcm63xx/image/bcm63xx_nand.mk
@@ -150,3 +150,56 @@ define Device/sercomm_ad1018
SERCOMM_VERSION := 1001
endef
TARGET_DEVICES += sercomm_ad1018
+
+define Device/sercomm_h500s
+ $(Device/sercomm-nand)
+ DEVICE_VENDOR := Sercomm
+ DEVICE_MODEL := H500-s
+ IMAGES := factory.img sysupgrade.bin
+ KERNEL := kernel-bin | append-dtb | lzma | cfe-jffs2-kernel $$(KERNEL_LOADADDR)
+ CHIP_ID := 63268
+ SOC := bcm63167
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ SUBPAGESIZE := 512
+ VID_HDR_OFFSET := 2048
+ DEVICE_PACKAGES += $(B43_PACKAGES) $(USB2_PACKAGES)
+ SERCOMM_PID := \
+ 30 30 30 30 30 30 30 31 34 32 35 38 34 62 30 30 \
+ 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
+ 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
+ 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
+ 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
+ 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
+ 30 30 30 30 33 34 31 37 30 30 30 30 30 30 30 30 \
+ 0D 0A 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ SERCOMM_VERSION := 1001
+endef
+TARGET_DEVICES += sercomm_h500s
+
+define Device/sercomm_h500s_lowi
+ $(Device/sercomm-nand)
+ DEVICE_VENDOR := Sercomm
+ DEVICE_MODEL := H500-s lowi
+ DEVICE_DTS := bcm63167-sercomm-h500s
+ IMAGES := factory.img sysupgrade.bin
+ KERNEL := kernel-bin | append-dtb | lzma | cfe-jffs2-kernel $$(KERNEL_LOADADDR)
+ CHIP_ID := 63268
+ SOC := bcm63167
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ SUBPAGESIZE := 512
+ VID_HDR_OFFSET := 2048
+ DEVICE_PACKAGES += $(B43_PACKAGES) $(USB2_PACKAGES)
+ SERCOMM_PID := \
+ 30 30 30 30 30 30 30 31 34 33 34 62 33 31 30 30 \
+ 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
+ 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
+ 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
+ 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
+ 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
+ 30 30 30 30 33 33 30 35 30 30 30 30 30 30 30 30 \
+ 0D 0A 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ SERCOMM_VERSION := 1001
+endef
+TARGET_DEVICES += sercomm_h500s_lowi
diff --git a/target/linux/bcm63xx/patches-5.4/568-board-H500s.patch b/target/linux/bcm63xx/patches-5.4/568-board-H500s.patch
new file mode 100644
index 0000000000..f14e29bfba
--- /dev/null
+++ b/target/linux/bcm63xx/patches-5.4/568-board-H500s.patch
@@ -0,0 +1,72 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2867,10 +2867,45 @@
+ },
+
+ },
+ },
+ };
++
++static struct board_info __initdata board_H500s = {
++ .name = "BXK00C-1.6",
++ .expected_cpu_id = 0x63268,
++
++ .has_pci = 0,
++ .use_fallback_sprom = 0,
++
++ .has_ehci0 = 1,
++ .has_ohci0 = 1,
++ .num_usbh_ports = 1,
++
++ .has_enetsw = 1,
++
++ .enetsw = {
++ .used_ports = {
++ [3] = {
++ .used = 1,
++ .phy_id = 12,
++ .name = "WAN",
++ },
++
++ [4] = {
++ .used = 1,
++ .phy_id = 0,
++ .bypass_link = 1,
++ .force_speed = 1000,
++ .force_duplex_full = 1,
++ .mii_override = 1,
++ .timing_sel = 1,
++ .name = "RGMII",
++ },
++ },
++ },
++};
+ #endif /* CONFIG_BCM63XX_CPU_63268 */
+
+ /*
+ * all boards
+ */
+@@ -2981,10 +3016,11 @@
+ &board_963269bhr,
+ &board_VG8050,
+ &board_VR3032u,
+ &board_vw6339gu,
+ &board_BSKYB_63168,
++ &board_H500s,
+ #endif
+ };
+
+ static struct of_device_id const bcm963xx_boards_dt[] = {
+ #ifdef CONFIG_OF
+@@ -3099,10 +3135,11 @@
+ { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, },
+ { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, },
+ { .compatible = "comtrend,vg-8050", .data = &board_VG8050, },
+ { .compatible = "comtrend,vr-3032u", .data = &board_VR3032u, },
+ { .compatible = "inteno,vg50", .data = &board_vw6339gu, },
++ { .compatible = "sercomm,h500s", .data = &board_H500s, },
+ { .compatible = "sky,sr102", .data = &board_BSKYB_63168, },
+ #endif
+ #endif /* CONFIG_OF */
+ { },
+ };
--
2.27.0
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list