[OpenWrt-Devel] [PATCH 2/4] bcm63xx: image: don't add the CFE to the sercomm factory

[Daniel González Cabanelas]

There is no need to include the CFE bootloader in the Sercomm factory
images.

There might be a case when this could be useful:
  - We are running the stock firmware on the first Sercomm image
  - The second partition storing the botloader was erased (unlikely)
Even in this case flashing an image without a bootlader is harmless.

Don't include the bootloader in the factory image creation and rid of the
risk of flashing factory images with an untested bootloader partition.

Signed-off-by: Daniel González Cabanelas <dgcbueu at gmail.com>
---
 target/linux/bcm63xx/image/Makefile | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/target/linux/bcm63xx/image/Makefile b/target/linux/bcm63xx/image/Makefile
index eb4b78b06a..e57b99391f 100644
--- a/target/linux/bcm63xx/image/Makefile
+++ b/target/linux/bcm63xx/image/Makefile
@@ -242,20 +242,8 @@ define Build/cfe-sercomm-part
 		--part-name rootfs_lib \
 		--part-version $(SERCOMM_VERSION)
 
-	rm -rf $@-bootloader
-	mkdir -p $@-bootloader
-	cp $(KDIR)/bcm63xx-cfe/$(CFE_RAM_FILE) $@-bootloader/$(CFE_RAM_JFFS2_NAME)
-	$(call Build/cfe-jffs2,$@-bootloader)
-	$(call Build/pad-to,$(BLOCKSIZE))
-	$(TOPDIR)/scripts/sercomm-partition-tag.py \
-		--input-file $@ \
-		--output-file $@.bootloader \
-		--part-name bootloader \
-		--part-version $(SERCOMM_VERSION)
-
 	mv $@.kernel_rootfs $@
 	dd if=$@.rootfs_lib >> $@
-	dd if=$@.bootloader >> $@
 endef
 
 define Build/cfe-sercomm-load
-- 
2.27.0





_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel