[PATCH] ramips: add support for GL.iNet GL-MT1300

xinfa.deng at gl-inet.com xinfa.deng at gl-inet.com
Wed Dec 16 02:58:28 EST 2020


From: Xinfa Deng <xinfa.deng at gl-inet.com>

The GL-MT1300 is a high-performance new generation pocket-sized router
that offers a powerful hardware and first-class cybersecurity protocol
with unique and modern design.

Specifications:
- SoC: MT7621A, Dual-Core @880MHz
- RAM: 256 MB DDR3
- Flash: 32 MB
- Ethernet: 3 x 10/100/1000: 2 x LAN + 1 x WAN
- Wireless: 1 x MT7615D Dual-Band 2.4GHz(400Mbps) + 5GHz(867Mbps)
- USB: 1 x USB 3.0 port
- Slot: 1 x MicroSD card slot
- Button: 1 x Reset button
- Switch: 1 x Mode switch
- LED: 1 x Blue LED + 1 x White LED

MAC addresses based on vendor firmware:
WAN : factory 0x4000
LAN : Mac from factory 0x4000 + 1
2.4GHz : factory 0x4
5GHz : Mac form factory 0x4 + 1

Flashing instructions:
1.Connect to one of LAN ports.
2.Set the static IP on the PC to 192.168.1.2.
3.Press the Reset button and power the device (do not release the button).
  After waiting for the blue led to flash 5 times, the white led will
  come on and release the button.
4.Browse the 192.168.1.1 web page and update firmware according to web
  tips.
5.The blue led will flash when the firmware is being upgraded.
6.The blue led stops blinking to indicate that the firmware upgrade is
  complete and U-Boot automatically starts the firmware.

For more information on GL-MT1300, see the OFFICIAL GL.iNet website:
https://www.gl-inet.com/products/gl-mt1300/

Signed-off-by: Xinfa Deng <xinfa.deng at gl-inet.com>
---
 .../linux/ramips/dts/mt7621_glinet_gl-mt1300.dts   | 150 +++++++++++++++++++++
 target/linux/ramips/image/mt7621.mk                |   9 ++
 .../mt7621/base-files/etc/board.d/02_network       |   1 +
 .../etc/hotplug.d/ieee80211/10_fix_wifi_mac        |   3 +
 4 files changed, 163 insertions(+)
 create mode 100644 target/linux/ramips/dts/mt7621_glinet_gl-mt1300.dts

diff --git a/target/linux/ramips/dts/mt7621_glinet_gl-mt1300.dts b/target/linux/ramips/dts/mt7621_glinet_gl-mt1300.dts
new file mode 100644
index 0000000..8762e4c
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_glinet_gl-mt1300.dts
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "glinet,gl-mt1300", "mediatek,mt7621-soc";
+	model = "GL.iNet GL-MT1300";
+
+	aliases {
+		led-boot = &led_run;
+		led-failsafe = &led_run;
+		led-running = &led_run;
+		led-upgrade = &led_run;
+		label-mac-device = &wan;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		switch {
+			label = "switch";
+			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_run: run {
+			label = "blue:run";
+			gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		system {
+			label = "white:system";
+			gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&i2c {
+	status = "okay";
+};
+
+&sdhci {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash at 0 {
+		compatible = "mx25l25635f", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition at 0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition at 30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			factory: partition at 40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+			};
+
+			partition at 50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0x1fb0000>;
+			};
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi at 0,0 {
+		compatible = "mediatek,mt76";
+		reg = <0x0000 0 0 0 0>;
+		mediatek,mtd-eeprom = <&factory 0x0>;
+	};
+};
+
+&gmac0 {
+	mtd-mac-address = <&factory 0x4000>;
+	mtd-mac-address-increment = <1>;
+};
+
+&switch0 {
+	ports {
+		port at 2 {
+			status = "okay";
+			label = "lan1";
+		};
+
+		port at 3 {
+			status = "okay";
+			label = "lan2";
+		};
+
+		wan: port at 4 {
+			status = "okay";
+			label = "wan";
+			mtd-mac-address = <&factory 0x4000>;
+		};
+	};
+};
+
+&uartlite3 {
+	status = "okay";
+};
+
+&state_default {
+	gpio {
+		group = "wdt", "jtag";
+		function = "gpio";
+	};
+};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index fad1855..615a55a 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -475,6 +475,15 @@ define Device/gehua_ghl-r-001
 endef
 TARGET_DEVICES += gehua_ghl-r-001
 
+define Device/glinet_gl-mt1300
+  $(Device/dsa-migration)
+  IMAGE_SIZE :=32448k
+  DEVICE_VENDOR := GL.iNet
+  DEVICE_MODEL := GL-MT1300
+  DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware kmod-usb3
+endef
+TARGET_DEVICES += glinet_gl-mt1300
+
 define Device/gnubee_gb-pc1
   $(Device/dsa-migration)
   DEVICE_VENDOR := GnuBee
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index c5b3514..bca4cc2 100755
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -14,6 +14,7 @@ ramips_setup_interfaces()
 		ucidef_set_interfaces_lan_wan "lan" "wan"
 		;;
 	asiarf,ap7621-nv1|\
+	glinet,gl-mt1300|\
 	lenovo,newifi-d1|\
 	mikrotik,routerboard-m33g|\
 	xiaomi,mi-router-3g|\
diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index b7a41f0..365dfd8 100644
--- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -10,6 +10,9 @@ PHYNBR=${DEVPATH##*/phy}
 board=$(board_name)
 
 case "$board" in
+	glinet,gl-mt1300)
+		[ "$PHYNBR" = "1" ] && macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1 > /sys${DEVPATH}/macaddress
+		;;
 	linksys,ea7300-v1|\
 	linksys,ea7300-v2|\
 	linksys,ea7500-v2)
-- 
2.7.4






More information about the openwrt-devel mailing list