[PATCH] ramips: add support for GL.iNet GL-MT1300

xinfa.deng at gl-inet.com xinfa.deng at gl-inet.com
Mon Dec 14 23:14:47 EST 2020


From: "Xinfa Deng" <xinfa.deng at gl-inet.com>

The GL-MT1300 is a high-performance new generation pocket-sized router
that offers a powerful hardware and first-class cybersecurity protocol
with unique and modern design.

Specifications:
- SoC: MT7621A, Dual-Core @880MHz
- RAM: 256 MB DDR3
- Flash: 32 MB
- Ethernet: 3 x 10/100/1000: 2 x LAN + 1 x WAN
- Wireless: 1 x MT7615D Dual-Band 2.4GHz(400Mbps) + 5GHz(867Mbps)
- USB: 1 x USB 3.0 port
- Slot: 1 x MicroSD card slot
- Button: 1 x Reset button
- Switch: 1 x Mode switch
- LED: 1 x Blue LED + 1 x White LED

MAC addresses based on vendor firmware:
WAN : factory 0x4000
LAN : Mac from factory 0x4000 + 1
2.4GHz : factory 0x4
5GHz : Mac form factory 0x4 + 1

For more information on GL-MT1300, see the OFFICIAL GL.iNet website:
https://www.gl-inet.com/products/gl-mt1300/

Signed-off-by: Xinfa Deng <xinfa.deng at gl-inet.com>
---
 .../linux/ramips/dts/mt7621_glinet_gl-mt1300.dts   | 150 +++++++++++++++++++++
 target/linux/ramips/image/mt7621.mk                |   9 ++
 .../mt7621/base-files/etc/board.d/02_network       |   1 +
 .../etc/hotplug.d/ieee80211/10_fix_wifi_mac        |   3 +
 4 files changed, 163 insertions(+)
 create mode 100644 target/linux/ramips/dts/mt7621_glinet_gl-mt1300.dts

diff --git a/target/linux/ramips/dts/mt7621_glinet_gl-mt1300.dts b/target/linux/ramips/dts/mt7621_glinet_gl-mt1300.dts
new file mode 100644
index 0000000..666fcfb
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_glinet_gl-mt1300.dts
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "glinet,gl-mt1300", "mediatek,mt7621-soc";
+	model = "GL.iNet GL-MT1300";
+
+	aliases {
+		led-boot = &led_run;
+		led-failsafe = &led_run;
+		led-running = &led_run;
+		led-upgrade = &led_run;
+		label-mac-device = &wan;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		switch {
+			label = "switch";
+			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_run: blue {
+			label = "blue:run";
+			gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		white {
+			label = "white:system";
+			gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&i2c {
+	status = "okay";
+};
+
+&sdhci {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash at 0 {
+		compatible = "mx25l25635f", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition at 0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition at 30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			factory: partition at 40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+			};
+
+			partition at 50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0x1fb0000>;
+			};
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi at 0,0 {
+		compatible = "mediatek,mt76";
+		reg = <0x0000 0 0 0 0>;
+		mediatek,mtd-eeprom = <&factory 0x0>;
+	};
+};
+
+&gmac0 {
+	mtd-mac-address = <&factory 0x4000>;
+	mtd-mac-address-increment = <1>;
+};
+
+&switch0 {
+	ports {
+		port at 2 {
+			status = "okay";
+			label = "lan1";
+		};
+
+		port at 3 {
+			status = "okay";
+			label = "lan2";
+		};
+
+		wan: port at 4 {
+			status = "okay";
+			label = "wan";
+			mtd-mac-address = <&factory 0x4000>;
+		};
+	};
+};
+
+&uartlite3 {
+	status = "okay";
+};
+
+&state_default {
+	gpio {
+		group = "wdt", "jtag";
+		function = "gpio";
+	};
+};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index fad1855..615a55a 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -475,6 +475,15 @@ define Device/gehua_ghl-r-001
 endef
 TARGET_DEVICES += gehua_ghl-r-001
 
+define Device/glinet_gl-mt1300
+  $(Device/dsa-migration)
+  IMAGE_SIZE :=32448k
+  DEVICE_VENDOR := GL.iNet
+  DEVICE_MODEL := GL-MT1300
+  DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware kmod-usb3
+endef
+TARGET_DEVICES += glinet_gl-mt1300
+
 define Device/gnubee_gb-pc1
   $(Device/dsa-migration)
   DEVICE_VENDOR := GnuBee
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index c5b3514..bca4cc2 100755
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -14,6 +14,7 @@ ramips_setup_interfaces()
 		ucidef_set_interfaces_lan_wan "lan" "wan"
 		;;
 	asiarf,ap7621-nv1|\
+	glinet,gl-mt1300|\
 	lenovo,newifi-d1|\
 	mikrotik,routerboard-m33g|\
 	xiaomi,mi-router-3g|\
diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index b7a41f0..365dfd8 100644
--- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -10,6 +10,9 @@ PHYNBR=${DEVPATH##*/phy}
 board=$(board_name)
 
 case "$board" in
+	glinet,gl-mt1300)
+		[ "$PHYNBR" = "1" ] && macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1 > /sys${DEVPATH}/macaddress
+		;;
 	linksys,ea7300-v1|\
 	linksys,ea7300-v2|\
 	linksys,ea7500-v2)
-- 
2.7.4






More information about the openwrt-devel mailing list