[OpenWrt-Devel] [PATCH] treewide: use new procd sysupgrade $UPGRADE_BACKUP variable
Rafał Miłecki
zajec5 at gmail.com
Thu Sep 5 03:13:15 EDT 2019
From: Rafał Miłecki <rafal at milecki.pl>
It's a variable set by procd that should replace hardcoded
/tmp/sysupgrade.tgz.
Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
---
package/base-files/files/lib/upgrade/common.sh | 2 +-
package/base-files/files/lib/upgrade/stage2 | 1 -
target/linux/apm821xx/base-files/lib/upgrade/wdbook.sh | 2 +-
target/linux/ar71xx/base-files/lib/upgrade/dir825.sh | 2 +-
target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh | 2 +-
target/linux/ar71xx/base-files/lib/upgrade/platform.sh | 4 ++--
target/linux/ath25/base-files/lib/upgrade/platform.sh | 2 +-
target/linux/ath79/base-files/lib/upgrade/platform.sh | 4 ++--
target/linux/brcm2708/base-files/lib/upgrade/platform.sh | 4 ++--
target/linux/imx6/base-files/lib/upgrade/platform.sh | 2 +-
target/linux/ipq40xx/base-files/lib/upgrade/openmesh.sh | 2 +-
target/linux/ipq40xx/base-files/lib/upgrade/platform.sh | 2 +-
target/linux/ipq806x/base-files/lib/upgrade/zyxel.sh | 2 +-
target/linux/ixp4xx/base-files/lib/upgrade/platform.sh | 2 +-
target/linux/mediatek/base-files/lib/upgrade/platform.sh | 2 +-
target/linux/mvebu/base-files/lib/upgrade/linksys.sh | 2 +-
target/linux/mvebu/base-files/lib/upgrade/sdcard.sh | 2 +-
target/linux/mvebu/base-files/lib/upgrade/uDPU.sh | 4 ++--
target/linux/octeon/base-files/lib/upgrade/platform.sh | 2 +-
target/linux/omap/base-files/lib/upgrade/platform.sh | 2 +-
target/linux/sunxi/base-files/lib/upgrade/platform.sh | 2 +-
target/linux/tegra/base-files/lib/upgrade/platform.sh | 2 +-
target/linux/x86/base-files/lib/upgrade/platform.sh | 2 +-
23 files changed, 26 insertions(+), 27 deletions(-)
diff --git a/package/base-files/files/lib/upgrade/common.sh b/package/base-files/files/lib/upgrade/common.sh
index 279470fcd8..8e7866f698 100644
--- a/package/base-files/files/lib/upgrade/common.sh
+++ b/package/base-files/files/lib/upgrade/common.sh
@@ -221,7 +221,7 @@ indicate_upgrade() {
default_do_upgrade() {
sync
if [ "$UPGRADE_OPT_SAVE_CONFIG" -eq 1 ]; then
- get_image "$1" "$2" | mtd $MTD_ARGS $MTD_CONFIG_ARGS -j "$CONF_TAR" write - "${PART_NAME:-image}"
+ get_image "$1" "$2" | mtd $MTD_ARGS $MTD_CONFIG_ARGS -j "$UPGRADE_BACKUP" write - "${PART_NAME:-image}"
else
get_image "$1" "$2" | mtd $MTD_ARGS write - "${PART_NAME:-image}"
fi
diff --git a/package/base-files/files/lib/upgrade/stage2 b/package/base-files/files/lib/upgrade/stage2
index ff2a9aee05..5d3d46ee80 100755
--- a/package/base-files/files/lib/upgrade/stage2
+++ b/package/base-files/files/lib/upgrade/stage2
@@ -9,7 +9,6 @@ COMMAND="$2"
export INTERACTIVE=0
export VERBOSE=1
export CONFFILES=/tmp/sysupgrade.conffiles
-export CONF_TAR=/tmp/sysupgrade.tgz
RAMFS_COPY_BIN= # extra programs for temporary ramfs root
RAMFS_COPY_DATA= # extra data files
diff --git a/target/linux/apm821xx/base-files/lib/upgrade/wdbook.sh b/target/linux/apm821xx/base-files/lib/upgrade/wdbook.sh
index e3de6ed0b5..1acc6c67cf 100644
--- a/target/linux/apm821xx/base-files/lib/upgrade/wdbook.sh
+++ b/target/linux/apm821xx/base-files/lib/upgrade/wdbook.sh
@@ -88,7 +88,7 @@ mbl_copy_config() {
if export_partdevice partdev 1; then
mount -t ext4 -o rw,noatime "/dev/$partdev" /mnt
- cp -af "$CONF_TAR" "/mnt/$BACKUP_FILE"
+ cp -af "$UPGRADE_BACKUP" "/mnt/$BACKUP_FILE"
umount /mnt
fi
}
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/dir825.sh b/target/linux/ar71xx/base-files/lib/upgrade/dir825.sh
index eac0aef1b8..c694c2e6f2 100644
--- a/target/linux/ar71xx/base-files/lib/upgrade/dir825.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/dir825.sh
@@ -75,7 +75,7 @@ dir825b_do_upgrade_combined() {
if [ -n "$fw_mtd" ] && [ ${fw_blocks:-0} -gt 0 ]; then
local append=""
- [ -f "$CONF_TAR" -a "$UPGRADE_OPT_SAVE_CONFIG" -eq 1 ] && append="-j $CONF_TAR"
+ [ -f "$UPGRADE_BACKUP" -a "$UPGRADE_OPT_SAVE_CONFIG" -eq 1 ] && append="-j $UPGRADE_BACKUP"
sync
dd if="$fw_file" bs=64k skip=1 count=$fw_blocks 2>/dev/null | \
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh b/target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh
index a6891dbbe7..8536d4ba4a 100644
--- a/target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh
@@ -159,7 +159,7 @@ platform_do_upgrade_openmesh()
local cfg_size= kernel_size= rootfs_size=
local append=""
- [ -f "$CONF_TAR" -a "$UPGRADE_OPT_SAVE_CONFIG" -eq 1 ] && append="-j $CONF_TAR"
+ [ -f "$UPGRADE_BACKUP" -a "$UPGRADE_OPT_SAVE_CONFIG" -eq 1 ] && append="-j $UPGRADE_BACKUP"
cfg_size=$(dd if="$img_path" bs=2 skip=35 count=4 2>/dev/null)
kernel_size=$(dd if="$img_path" bs=2 skip=71 count=4 2>/dev/null)
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index fd6453f8cd..726163291d 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -65,7 +65,7 @@ platform_do_upgrade_combined() {
then
local rootfspart=$(platform_find_rootfspart "$partitions" "$kernelpart")
local append=""
- [ -f "$CONF_TAR" -a "$UPGRADE_OPT_SAVE_CONFIG" -eq 1 ] && append="-j $CONF_TAR"
+ [ -f "$UPGRADE_BACKUP" -a "$UPGRADE_OPT_SAVE_CONFIG" -eq 1 ] && append="-j $UPGRADE_BACKUP"
if [ "$PLATFORM_DO_UPGRADE_COMBINED_SEPARATE_MTD" -ne 1 ]; then
( dd if="$1" bs=$CI_BLKSZ skip=1 count=$kern_blocks 2>/dev/null; \
@@ -164,7 +164,7 @@ platform_do_upgrade_compex() {
if [ -n "$fw_mtd" ] && [ ${fw_blocks:-0} -gt 0 ]; then
local append=""
- [ -f "$CONF_TAR" -a "$UPGRADE_OPT_SAVE_CONFIG" -eq 1 ] && append="-j $CONF_TAR"
+ [ -f "$UPGRADE_BACKUP" -a "$UPGRADE_OPT_SAVE_CONFIG" -eq 1 ] && append="-j $UPGRADE_BACKUPs"
sync
dd if="$fw_file" bs=64k skip=1 count=$fw_blocks 2>/dev/null | \
diff --git a/target/linux/ath25/base-files/lib/upgrade/platform.sh b/target/linux/ath25/base-files/lib/upgrade/platform.sh
index f0b937df22..0dde103605 100644
--- a/target/linux/ath25/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ath25/base-files/lib/upgrade/platform.sh
@@ -67,7 +67,7 @@ platform_do_upgrade() {
[ ${erase_size:-0} -gt 0 ];
then
local append=""
- [ -f "$CONF_TAR" -a "$UPGRADE_OPT_SAVE_CONFIG" -eq 1 ] && append="-j $CONF_TAR"
+ [ -f "$UPGRADE_BACKUP" -a "$UPGRADE_OPT_SAVE_CONFIG" -eq 1 ] && append="-j $UPGRADE_BACKUP"
( dd if="$1" bs=$CI_BLKSZ skip=1 count=$kern_blocks 2>/dev/null; \
dd if="$1" bs=$CI_BLKSZ skip=$((1+$kern_blocks)) count=$root_blocks 2>/dev/null ) | \
diff --git a/target/linux/ath79/base-files/lib/upgrade/platform.sh b/target/linux/ath79/base-files/lib/upgrade/platform.sh
index 7bad1af504..f7e62143e7 100644
--- a/target/linux/ath79/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ath79/base-files/lib/upgrade/platform.sh
@@ -14,7 +14,7 @@ redboot_fis_do_upgrade() {
if [ "$magic" = "4349" ]; then
local kern_length=0x$(dd if="$sysup_file" bs=2 skip=1 count=4 2>/dev/null)
- [ -f "$CONF_TAR" -a "$UPGRADE_OPT_UPGRADE_OPT_SAVE_CONFIG" -eq 1 ] && append="-j $CONF_TAR"
+ [ -f "$UPGRADE_BACKUP" -a "$UPGRADE_OPT_UPGRADE_OPT_SAVE_CONFIG" -eq 1 ] && append="-j $UPGRADE_BACKUP"
dd if="$sysup_file" bs=64k skip=1 2>/dev/null | \
mtd -r $append -F$kern_part:$kern_length:0x80060000,rootfs write - $kern_part:rootfs
@@ -22,7 +22,7 @@ redboot_fis_do_upgrade() {
local board_dir=$(tar tf $sysup_file | grep -m 1 '^sysupgrade-.*/$')
local kern_length=$(tar xf $sysup_file ${board_dir}kernel -O | wc -c)
- [ -f "$CONF_TAR" -a "$UPGRADE_OPT_UPGRADE_OPT_SAVE_CONFIG" -eq 1 ] && append="-j $CONF_TAR"
+ [ -f "$UPGRADE_BACKUP" -a "$UPGRADE_OPT_UPGRADE_OPT_SAVE_CONFIG" -eq 1 ] && append="-j $UPGRADE_BACKUP"
tar xf $sysup_file ${board_dir}kernel ${board_dir}root -O | \
mtd -r $append -F$kern_part:$kern_length:0x80060000,rootfs write - $kern_part:rootfs
diff --git a/target/linux/brcm2708/base-files/lib/upgrade/platform.sh b/target/linux/brcm2708/base-files/lib/upgrade/platform.sh
index 48994ebe07..811355b8f7 100644
--- a/target/linux/brcm2708/base-files/lib/upgrade/platform.sh
+++ b/target/linux/brcm2708/base-files/lib/upgrade/platform.sh
@@ -91,8 +91,8 @@ platform_copy_config() {
if export_partdevice partdev 1; then
mkdir -p /boot
[ -f /boot/kernel.img ] || mount -t vfat -o rw,noatime "/dev/$partdev" /boot
- cp -af "$CONF_TAR" "/boot/$BACKUP_FILE"
- tar -C / -zxvf "$CONF_TAR" boot/config.txt
+ cp -af "$UPGRADE_BACKUP" "/boot/$BACKUP_FILE"
+ tar -C / -zxvf "$UPGRADE_BACKUP" boot/config.txt
sync
unmount /boot
fi
diff --git a/target/linux/imx6/base-files/lib/upgrade/platform.sh b/target/linux/imx6/base-files/lib/upgrade/platform.sh
index 28bdec9e9c..9414b18710 100755
--- a/target/linux/imx6/base-files/lib/upgrade/platform.sh
+++ b/target/linux/imx6/base-files/lib/upgrade/platform.sh
@@ -17,7 +17,7 @@ enable_image_metadata_check
apalis_copy_config() {
apalis_mount_boot
- cp -af "$CONF_TAR" "/boot/$BACKUP_FILE"
+ cp -af "$UPGRADE_BACKUP" "/boot/$BACKUP_FILE"
sync
umount /boot
}
diff --git a/target/linux/ipq40xx/base-files/lib/upgrade/openmesh.sh b/target/linux/ipq40xx/base-files/lib/upgrade/openmesh.sh
index 0d93f289a3..e313562017 100644
--- a/target/linux/ipq40xx/base-files/lib/upgrade/openmesh.sh
+++ b/target/linux/ipq40xx/base-files/lib/upgrade/openmesh.sh
@@ -74,7 +74,7 @@ platform_do_upgrade_openmesh() {
#
# take care of restoring a saved config
- [ "$UPGRADE_OPT_SAVE_CONFIG" -eq 1 ] && restore_backup="${MTD_CONFIG_ARGS} -j ${CONF_TAR}"
+ [ "$UPGRADE_OPT_SAVE_CONFIG" -eq 1 ] && restore_backup="${MTD_CONFIG_ARGS} -j ${UPGRADE_BACKUP}"
mtd -q erase inactive
tar xf $tar_file ${board_dir}/root -O | mtd -n -p $kernel_length $restore_backup write - $PART_NAME
diff --git a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
index 8a97b6b6be..6b9858beb0 100644
--- a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
@@ -38,7 +38,7 @@ zyxel_do_upgrade() {
tar Oxf $tar_file ${board_dir}/kernel | mtd write - kernel
if [ "$UPGRADE_OPT_SAVE_CONFIG" -eq 1 ]; then
- tar Oxf $tar_file ${board_dir}/root | mtd -j "$CONF_TAR" write - rootfs
+ tar Oxf $tar_file ${board_dir}/root | mtd -j "$UPGRADE_BACKUP" write - rootfs
else
tar Oxf $tar_file ${board_dir}/root | mtd write - rootfs
fi
diff --git a/target/linux/ipq806x/base-files/lib/upgrade/zyxel.sh b/target/linux/ipq806x/base-files/lib/upgrade/zyxel.sh
index e9fb0ad388..cece018b31 100644
--- a/target/linux/ipq806x/base-files/lib/upgrade/zyxel.sh
+++ b/target/linux/ipq806x/base-files/lib/upgrade/zyxel.sh
@@ -60,7 +60,7 @@ zyxel_do_flash() {
mkdir /tmp/new_root
mount -t ext4 $loopdev /tmp/new_root && {
echo "Saving config to rootfs_data at position ${offset}."
- cp -v "$CONF_TAR" "/tmp/new_root/$BACKUP_FILE"
+ cp -v "$UPGRADE_BACKUP" "/tmp/new_root/$BACKUP_FILE"
umount /tmp/new_root
}
diff --git a/target/linux/ixp4xx/base-files/lib/upgrade/platform.sh b/target/linux/ixp4xx/base-files/lib/upgrade/platform.sh
index 6072591e11..557f43ce6f 100644
--- a/target/linux/ixp4xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ixp4xx/base-files/lib/upgrade/platform.sh
@@ -68,7 +68,7 @@ platform_do_upgrade_combined() {
[ ${erase_size:-0} -gt 0 ];
then
local append=""
- [ -f "$CONF_TAR" -a "$UPGRADE_OPT_SAVE_CONFIG" -eq 1 ] && append="-j $CONF_TAR"
+ [ -f "$UPGRADE_BACKUP" -a "$UPGRADE_OPT_SAVE_CONFIG" -eq 1 ] && append="-j $UPGRADE_BACKUP"
# write the kernel
dd if="$1" bs=$CI_BLKSZ skip=1 count=$kern_blocks 2>/dev/null | \
diff --git a/target/linux/mediatek/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/base-files/lib/upgrade/platform.sh
index d1b9fdeb95..9c99ee1c18 100755
--- a/target/linux/mediatek/base-files/lib/upgrade/platform.sh
+++ b/target/linux/mediatek/base-files/lib/upgrade/platform.sh
@@ -54,7 +54,7 @@ platform_check_image() {
platform_copy_config_emmc() {
mkdir -p /recovery
mount -o rw,noatime /dev/mmcblk0p1 /recovery
- cp -af "$CONF_TAR" "/recovery/$BACKUP_FILE"
+ cp -af "$UPGRADE_BACKUP" "/recovery/$BACKUP_FILE"
sync
umount /recovery
}
diff --git a/target/linux/mvebu/base-files/lib/upgrade/linksys.sh b/target/linux/mvebu/base-files/lib/upgrade/linksys.sh
index 5104db31f3..ca64a0edf1 100644
--- a/target/linux/mvebu/base-files/lib/upgrade/linksys.sh
+++ b/target/linux/mvebu/base-files/lib/upgrade/linksys.sh
@@ -93,6 +93,6 @@ platform_do_upgrade_linksys() {
}
platform_copy_config_linksys() {
- cp -f "$CONF_TAR" "/tmp/syscfg/$BACKUP_FILE"
+ cp -f "$UPGRADE_BACKUP" "/tmp/syscfg/$BACKUP_FILE"
sync
}
diff --git a/target/linux/mvebu/base-files/lib/upgrade/sdcard.sh b/target/linux/mvebu/base-files/lib/upgrade/sdcard.sh
index 03f6327657..184803a50f 100644
--- a/target/linux/mvebu/base-files/lib/upgrade/sdcard.sh
+++ b/target/linux/mvebu/base-files/lib/upgrade/sdcard.sh
@@ -106,7 +106,7 @@ platform_copy_config_sdcard() {
if export_partdevice partdev 1; then
mkdir -p /boot
[ -f /boot/kernel.img ] || mount -o rw,noatime /dev/$partdev /boot
- cp -af "$CONF_TAR" "/boot/$BACKUP_FILE"
+ cp -af "$UPGRADE_BACKUP" "/boot/$BACKUP_FILE"
sync
umount /boot
fi
diff --git a/target/linux/mvebu/base-files/lib/upgrade/uDPU.sh b/target/linux/mvebu/base-files/lib/upgrade/uDPU.sh
index dbcff58368..032c706605 100644
--- a/target/linux/mvebu/base-files/lib/upgrade/uDPU.sh
+++ b/target/linux/mvebu/base-files/lib/upgrade/uDPU.sh
@@ -149,8 +149,8 @@ platform_do_upgrade_uDPU() {
platform_copy_config_uDPU() {
# Config is saved on the /misc partition and copied on the rootfs after the reboot
- if [ -f "$CONF_TAR" ]; then
- cp -f "$CONF_TAR" "/misc/$BACKUP_FILE"
+ if [ -f "$UPGRADE_BACKUP" ]; then
+ cp -f "$UPGRADE_BACKUP" "/misc/$BACKUP_FILE"
sync
fi
}
diff --git a/target/linux/octeon/base-files/lib/upgrade/platform.sh b/target/linux/octeon/base-files/lib/upgrade/platform.sh
index 6233c337bc..4d0047bceb 100755
--- a/target/linux/octeon/base-files/lib/upgrade/platform.sh
+++ b/target/linux/octeon/base-files/lib/upgrade/platform.sh
@@ -25,7 +25,7 @@ platform_copy_config() {
case "$(board_name)" in
erlite)
mount -t vfat /dev/sda1 /mnt
- cp -af "$CONF_TAR" "/mnt/$BACKUP_FILE"
+ cp -af "$UPGRADE_BACKUP" "/mnt/$BACKUP_FILE"
umount /mnt
;;
esac
diff --git a/target/linux/omap/base-files/lib/upgrade/platform.sh b/target/linux/omap/base-files/lib/upgrade/platform.sh
index a5108c4c02..10412c5176 100644
--- a/target/linux/omap/base-files/lib/upgrade/platform.sh
+++ b/target/linux/omap/base-files/lib/upgrade/platform.sh
@@ -30,7 +30,7 @@ platform_copy_config() {
if export_partdevice partdev 1; then
mount -t vfat -o rw,noatime "/dev/$partdev" /mnt
- cp -af "$CONF_TAR" "/mnt/$BACKUP_FILE"
+ cp -af "$UPGRADE_BACKUP" "/mnt/$BACKUP_FILE"
umount /mnt
fi
}
diff --git a/target/linux/sunxi/base-files/lib/upgrade/platform.sh b/target/linux/sunxi/base-files/lib/upgrade/platform.sh
index a5108c4c02..10412c5176 100644
--- a/target/linux/sunxi/base-files/lib/upgrade/platform.sh
+++ b/target/linux/sunxi/base-files/lib/upgrade/platform.sh
@@ -30,7 +30,7 @@ platform_copy_config() {
if export_partdevice partdev 1; then
mount -t vfat -o rw,noatime "/dev/$partdev" /mnt
- cp -af "$CONF_TAR" "/mnt/$BACKUP_FILE"
+ cp -af "$UPGRADE_BACKUP" "/mnt/$BACKUP_FILE"
umount /mnt
fi
}
diff --git a/target/linux/tegra/base-files/lib/upgrade/platform.sh b/target/linux/tegra/base-files/lib/upgrade/platform.sh
index 9a8acde9b6..ea9bbe92bf 100644
--- a/target/linux/tegra/base-files/lib/upgrade/platform.sh
+++ b/target/linux/tegra/base-files/lib/upgrade/platform.sh
@@ -47,7 +47,7 @@ platform_copy_config() {
if export_partdevice partdev 1; then
mount -o rw,noatime "/dev/$partdev" /mnt
- cp -af "$CONF_TAR" "/mnt/$BACKUP_FILE"
+ cp -af "$UPGRADE_BACKUP" "/mnt/$BACKUP_FILE"
umount /mnt
fi
}
diff --git a/target/linux/x86/base-files/lib/upgrade/platform.sh b/target/linux/x86/base-files/lib/upgrade/platform.sh
index 855752b5d7..3b6c25877f 100644
--- a/target/linux/x86/base-files/lib/upgrade/platform.sh
+++ b/target/linux/x86/base-files/lib/upgrade/platform.sh
@@ -39,7 +39,7 @@ platform_copy_config() {
if export_partdevice partdev 1; then
mount -t ext4 -o rw,noatime "/dev/$partdev" /mnt
- cp -af "$CONF_TAR" "/mnt/$BACKUP_FILE"
+ cp -af "$UPGRADE_BACKUP" "/mnt/$BACKUP_FILE"
umount /mnt
fi
}
--
2.21.0
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list