[OpenWrt-Devel] [PATCH v5 2/5] ath79: WNR612v2: improve device support

Michal Cieslakiewicz michal.cieslakiewicz at wp.pl
Thu Oct 17 02:56:03 EDT 2019


On Wed, 16 Oct 2019 23:10:45 +0200
<mail at adrianschmutzler.de> wrote:

> Hi,
> 
> >  &pcie {
> > @@ -116,6 +123,8 @@
> >  	ath9k: wifi at 0,0 {
> >  		compatible = "pci168c,002b";
> >  		reg = <0x0000 0 0 0 0>;
> > +		mtd-mac-address = <&art 0x0>;
> > +		mtd-mac-address-increment = <1>;  
> 
> Sorry if I ask again, but I do not remember whether I asked this
> already: Is there a valid MAC address in the calibration data (0x1002
> or 0x1006 ...)? I just can't believe that eth0/eth1 are set from art
> but Wifi needs to be calculated.
> 
> Best
> 
> Adrian

Hello Adrian,

Yes, you've raised this topic, albeit without above offsets:
https://www.mail-archive.com/openwrt-devel@lists.openwrt.org/msg47839.html
Anyway, verified again for 612v2, nothing resembling hw address at
0x1002, 0x1006 or 0x108c.

Best regards
Michal

_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list