[OpenWrt-Devel] [PATCH] mpc85xx: add vendor to Makefile node name, derive SUPPORTED_DEVICES

Adrian Schmutzler freifunk at adrianschmutzler.de
Sat Nov 23 13:34:29 EST 2019


By adding the vendor to the Makefile device definition node name,
one can derive the standard compatible used in SUPPORTED_DEVICES
instead of having to specify it manually.

Despite, this moves the naming scheme closer to what is used for
other targets (ath79, ramips).

Build-tested on all subtargets.
Run-tested on TP-Link TL-WDR4900 v1.

Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
---
 target/linux/mpc85xx/image/Makefile | 28 +++++++++++++---------------
 1 file changed, 13 insertions(+), 15 deletions(-)

diff --git a/target/linux/mpc85xx/image/Makefile b/target/linux/mpc85xx/image/Makefile
index 156f1e6eda..81b7293d71 100644
--- a/target/linux/mpc85xx/image/Makefile
+++ b/target/linux/mpc85xx/image/Makefile
@@ -37,16 +37,17 @@ endef
 
 define Device/Default
   PROFILES := Default
-  DEVICE_DTS := $(1)
+  DEVICE_DTS := $(lastword $(subst _, ,$(1)))
   KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
   KERNEL_ENTRY := 0x00000000
   KERNEL_LOADADDR := 0x00000000
   KERNEL := kernel-bin
+  SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
 endef
 
 ifeq ($(SUBTARGET),generic)
 
-define Device/tl-wdr4900-v1
+define Device/tplink_tl-wdr4900-v1
   DEVICE_VENDOR := TP-Link
   DEVICE_MODEL := TL-WDR4900
   DEVICE_VARIANT := v1
@@ -59,33 +60,32 @@ define Device/tl-wdr4900-v1
   KERNEL := kernel-bin | uImage none
   KERNEL_ENTRY := 0x1000000
   KERNEL_LOADADDR := 0x1000000
-  SUPPORTED_DEVICES:=tl-wdr4900-v1 tplink,tl-wdr4900-v1
+  SUPPORTED_DEVICES += tl-wdr4900-v1
   ARTIFACTS := fdt.bin
   ARTIFACT/fdt.bin := append-dtb
   IMAGES := fdt.bin factory.bin sysupgrade.bin
   IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade | append-metadata
   IMAGE/factory.bin := append-rootfs | mktplinkfw factory
 endef
-TARGET_DEVICES += tl-wdr4900-v1
+TARGET_DEVICES += tplink_tl-wdr4900-v1
 
-define Device/red-15w-rev1
+define Device/sophos_red-15w-rev1
   DEVICE_VENDOR := Sophos
   DEVICE_MODEL := RED 15w
   DEVICE_VARIANT := Rev.1
   # Original firmware uses a dedicated DTB-partition.
   # The bootloader however supports FIT-images.
   KERNEL = kernel-bin | gzip | fit gzip $(KDIR)/image-$$(DEVICE_DTS).dtb
-  SUPPORTED_DEVICES := sophos,red-15w-rev1
   IMAGES := sysupgrade.bin
   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 endef
-TARGET_DEVICES += red-15w-rev1
+TARGET_DEVICES += sophos_red-15w-rev1
 
 endif
 
 ifeq ($(SUBTARGET),p1020)
 
-define Device/hiveap-330
+define Device/aerohive_hiveap-330
   DEVICE_VENDOR := Aerohive
   DEVICE_MODEL := HiveAP-330
   DEVICE_PACKAGES := kmod-tpm-i2c-atmel
@@ -93,7 +93,6 @@ define Device/hiveap-330
   KERNEL := kernel-bin | gzip | uImage gzip
   KERNEL_SIZE := 8m
   KERNEL_INITRAMFS := copy-file $(KDIR)/vmlinux-initramfs | uImage none
-  SUPPORTED_DEVICES := aerohive,hiveap-330
   IMAGES := fdt.bin sysupgrade.bin
   IMAGE/fdt.bin := append-dtb
   IMAGE/sysupgrade.bin := append-dtb | pad-to 256k | check-size 256k | \
@@ -101,9 +100,9 @@ define Device/hiveap-330
 	append-rootfs | pad-rootfs $$(BLOCKSIZE) | pad-to 41216k | check-size 41216k | \
 	append-kernel | append-metadata
 endef
-TARGET_DEVICES += hiveap-330
+TARGET_DEVICES += aerohive_hiveap-330
 
-define Device/panda
+define Device/ocedo_panda
   DEVICE_VENDOR := OCEDO
   DEVICE_MODEL := Panda
   DEVICE_PACKAGES := kmod-rtc-ds1307 uboot-envtools
@@ -111,18 +110,17 @@ define Device/panda
   PAGESIZE := 2048
   SUBPAGESIZE := 512
   BLOCKSIZE := 128k
-  SUPPORTED_DEVICES := ocedo,panda
   IMAGES := fdt.bin sysupgrade.bin
   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
   IMAGE/fdt.bin := append-dtb
 endef
-TARGET_DEVICES += panda
+TARGET_DEVICES += ocedo_panda
 
 endif
 
 ifeq ($(SUBTARGET),p2020)
 
-define Device/p2020rdb
+define Device/fsl_p2020rdb
   DEVICE_VENDOR := Freescale
   DEVICE_MODEL := P2020RDB
   DEVICE_DTS_DIR := $(DTS_DIR)/fsl
@@ -136,7 +134,7 @@ define Device/p2020rdb
   IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
 	pad-rootfs $$(BLOCKSIZE) | append-metadata
 endef
-TARGET_DEVICES += p2020rdb
+TARGET_DEVICES += fsl_p2020rdb
 
 endif
 
-- 
2.20.1


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list