[OpenWrt-Devel] [PATCH] ath79: add support for COMFAST CF-E130N v2

[Enrico Mioso]

SPI frequency?


> Il giorno 11 nov 2019, alle ore 23:02, Kryma <admin at kryma.net> ha scritto:
> 
> Hi,
> 
>> That's wrong. You have 0x7d0000, not 0xfd0000 ...
> 
> There seems to be some discrepancy, possibly v1 vs v2. The specifications on the website and the partitioning seem to imply a 8MB image size - however, U-boot bootloader and the sum of MTD block sizes gives us 16MB. Unsure, I tried both 8000 and 16192. Both seem to work well, save for some I/O errors when writing files to homedir with both. Not sure what that implies, but assuming 16MB as size all that given.
> 
>> Will this work without a defined gpio?
> 
> Could you elaborate?
> 
> 
> The rest seem straightforward to me, I will be happy to fix them in the next version.
> 
> 
> Closing thought, the aforementioned I/O errors. Parts of the filesystem seem to corrupt on occasion on my test device. I will look more into if it's a hardware issue, but for now are there any possible software/config causes you can think of?
> 
> Thanks much,
> 
> P. B.
> 
> 
> 
> 
> 
> 
> 
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel

_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel