[OpenWrt-Devel] New ath10k-ct firmware available

[Ben Greear]

Please see new file names and checksums below:

988x
3b2c584f7070c3e286ce27a370cc181d70b45f9cdaa462fb4f44c6c20d2ee8c1  firmware-2-ct-full-community-22.bin.lede.012
a7042b2c90de82b21e87f243411b6fb12142bb4fb28266ea92cdf3101557b6de  firmware-2-ct-full-htt-mgt-community-22.bin.lede.012
/home/greearb/candela_html/downloads
9887
c3f891b2cd4e225e1c635a328af3dce94481b096432020e445f71144dda749d5  firmware-2-ct-full-community-22.bin.lede.012
f5e9825279d590a2362f44aef4ced345376cccd65d9b826c131d4dbcef4e689c  firmware-2-ct-full-htt-mgt-community-22.bin.lede.012
/home/greearb/candela_html/downloads
9980
4b90fa91dcab68350fe695b3c918cb9a4fb09c2b419519b8b84b71da4cfde5e8  firmware-5-ct-full-community-12.bin-lede.012
6dd40233fe99d99c69781d6514cf9ba7862b3f66c647f7921ca8be6100799986  firmware-5-ct-full-htt-mgt-community-12.bin-lede.012
/home/greearb/candela_html/downloads
9984
2551f5c0bfa6c1b1222bd9452e14f60b8e29c8c0fe85de8af95393f31d544ea3  firmware-5-ct-full-community-12.bin-lede.012
90f947257e1f42496b22cbdd29be99fbc8ea8700045b4ed2380acc980b4c247b  firmware-5-ct-full-htt-mgt-community-12.bin-lede.012
/home/greearb/candela_html/downloads
4019
cd85fc9df8b3652f7b12c2ab745b2a9691dca5ca38f8d65a02003e938ad8b570  firmware-5-ct-full-community-12.bin-lede.012
67a923cda6ec3936ef23ec6c30c80dfc9bfd2cee73a142d2e308e8f035b8ed3a  firmware-5-ct-full-htt-mgt-community-12.bin-lede.012
/home/greearb/candela_html/downloads
9888
4bdb71b50c68f1a07c88d21f84a6c054fe1b8cb5bacd089a6b9f0a56448535d3  firmware-5-ct-full-community-12.bin-lede.012
e1f0242a91af58ec5628bb4f7c015f6c8dba55f92e2813f8f0b97c86ec496d2d  firmware-5-ct-full-htt-mgt-community-12.bin-lede.012
/home/greearb/candela_html/downloads


The release notes since last time for wave-1:

   *  October 5, 2019: Fix too-short msg caused by invalid use of PayloadLen in receive path.
                       This appears to resolve the issue of getting (and ignoring) too-short commands
                       when we detect loss of CE interrupts and go into polling mode.

   *  October 12, 2019:  Fix regression in IBSS mode that caused SWBA overrun issues.  Related to
                         regression added during the ct-station logic, specifically TSF allocation.
                         Thanks for Ahmed Zaki @ Mage-Networks for helping to diagnose and test.

   *  October 15, 2019:  Only send beacon tx completion events if we can detect CT driver is being
                         used (based on CT_STATS_OK flag being set).  This should help CT firmware work
                         better on stock driver.



The release notes since last time for wave-2:

   *  October 15, 2019:  Only send beacon tx completion events if we can detect CT driver is being
                         used (based on ATH10k_USE_TXCOMPL_TXRATE2 | ATH10k_USE_TXCOMPL_TXRATE1 flags being set).
                         This should help CT firmware work better on stock driver.

   *  October 31, 2019:  Compile out peer-ratecode-list-event.  ath10k driver ignores the event.

   *  November 1, 2019:  Fix rate-ctrl related crash when nss and other things were changed while
                         station stays associated.  See bug: https://github.com/greearb/ath10k-ct/issues/96

Thanks,
Ben

-- 
Ben Greear <greearb at candelatech.com>
Candela Technologies Inc  http://www.candelatech.com


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel