[OpenWrt-Devel] [PATCH] ath79: add D-Link DIR-615 rev. E4
Paul Fertser
fercerpav at gmail.com
Sun Nov 3 06:32:47 EST 2019
Support ported from ar71xx.
Signed-off-by: Paul Fertser <fercerpav at gmail.com>
---
.../ath79/dts/ar7240_dlink_dir-600-a1.dtsi | 173 ++++++++++++++++++
.../ath79/dts/ar7240_dlink_dir-615-e4.dts | 19 ++
target/linux/ath79/image/tiny.mk | 16 ++
.../ath79/tiny/base-files/etc/board.d/01_leds | 7 +
.../tiny/base-files/etc/board.d/02_network | 5 +
.../etc/hotplug.d/firmware/10-ath9k-eeprom | 4 +
6 files changed, 224 insertions(+)
create mode 100644 target/linux/ath79/dts/ar7240_dlink_dir-600-a1.dtsi
create mode 100644 target/linux/ath79/dts/ar7240_dlink_dir-615-e4.dts
diff --git a/target/linux/ath79/dts/ar7240_dlink_dir-600-a1.dtsi b/target/linux/ath79/dts/ar7240_dlink_dir-600-a1.dtsi
new file mode 100644
index 0000000000..e6206f6f42
--- /dev/null
+++ b/target/linux/ath79/dts/ar7240_dlink_dir-600-a1.dtsi
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar7240.dtsi"
+
+/ {
+ aliases {
+ led-boot = &power_amber;
+ led-failsafe = &power_amber;
+ led-running = &power_green;
+ led-upgrade = &power_amber;
+ label-mac-device = ð0;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&switch_led_pins>;
+
+ power_green: power_green {
+ label = "d-link:green:power";
+ gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ power_amber: power_amber {
+ label = "d-link:amber:power";
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps {
+ label = "d-link:blue:wps";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1 {
+ label = "d-link:green:lan1";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "d-link:green:lan2";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ lan3 {
+ label = "d-link:green:lan3";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ lan4 {
+ label = "d-link:green:lan4";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_amber {
+ label = "d-link:amber:wan";
+ gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan_green {
+ label = "d-link:green:wan";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+ num-cs = <1>;
+
+ flash at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition at 0 {
+ reg = <0x0 0x30000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ nvram: partition at 30000 {
+ reg = <0x30000 0x10000>;
+ label = "nvram";
+ read-only;
+ };
+
+ firmware: partition at 40000 {
+ compatible = "denx,uimage";
+ reg = <0x40000 0x370000>;
+ label = "firmware";
+ };
+
+ mac: partition at 3b0000 {
+ reg = <0x3b0000 0x10000>;
+ label = "mac";
+ read-only;
+ };
+
+ lp: partition at 3c0000 {
+ reg = <0x3c0000 0x30000>;
+ label = "lp";
+ read-only;
+ };
+
+ art: partition at 3f0000 {
+ reg = <0x3f0000 0x10000>;
+ label = "art";
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ /* ethernet MAC is stored in nvram */
+};
+
+ð1 {
+ status = "okay";
+
+ /* ethernet MAC is stored in nvram */
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi at 0,0 {
+ compatible = "pci168c,002b";
+ reg = <0x0000 0 0 0 0>;
+ qca,no-eeprom;
+ /* LAN MAC is supposed to be used for wifi */
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&pinmux {
+ switch_led_pins: pinmux_switch_led_pins {
+ pinctrl-single,bits = <0x0 0x0 0xf8>;
+ };
+};
+
+&uart {
+ status = "okay";
+};
diff --git a/target/linux/ath79/dts/ar7240_dlink_dir-615-e4.dts b/target/linux/ath79/dts/ar7240_dlink_dir-615-e4.dts
new file mode 100644
index 0000000000..7ea6e8a583
--- /dev/null
+++ b/target/linux/ath79/dts/ar7240_dlink_dir-615-e4.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "ar7240_dlink_dir-600-a1.dtsi"
+
+/ {
+ model = "D-Link DIR-615 rev. E4";
+ compatible = "dlink,dir-615-e4", "qca,ar7240";
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "d-link:green:wlan";
+ gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
diff --git a/target/linux/ath79/image/tiny.mk b/target/linux/ath79/image/tiny.mk
index 8f867575af..a4aed65684 100644
--- a/target/linux/ath79/image/tiny.mk
+++ b/target/linux/ath79/image/tiny.mk
@@ -13,6 +13,22 @@ define Device/buffalo_whr-g301n
endef
TARGET_DEVICES += buffalo_whr-g301n
+define Device/dlink_dir-615-e4
+ ATH_SOC := ar7240
+ DEVICE_VENDOR := D-Link
+ DEVICE_MODEL := DIR-615
+ DEVICE_VARIANT := E4
+ IMAGE_SIZE := 3520k
+ FACTORY_IMAGE_SIZE := 3456k
+ IMAGES += factory.bin
+ IMAGE/default := append-kernel | append-rootfs | pad-rootfs
+ IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size $$$$(IMAGE_SIZE)
+ IMAGE/factory.bin := $$(IMAGE/default) | check-size $$$$(FACTORY_IMAGE_SIZE) | \
+ pad-to $$$$(FACTORY_IMAGE_SIZE) | append-string "AP99-AR7240-RT-091105-05"
+ SUPPORTED_DEVICES += dir-615-e4
+endef
+TARGET_DEVICES += dlink_dir-615-e4
+
define Device/pqi_air-pen
ATH_SOC := ar9330
DEVICE_VENDOR := PQI
diff --git a/target/linux/ath79/tiny/base-files/etc/board.d/01_leds b/target/linux/ath79/tiny/base-files/etc/board.d/01_leds
index bb1799c645..80877929f4 100755
--- a/target/linux/ath79/tiny/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/tiny/base-files/etc/board.d/01_leds
@@ -15,6 +15,13 @@ buffalo,whr-g301n)
ucidef_set_led_switch "lan3" "LAN3" "$boardname:green:lan3" "switch0" "0x08"
ucidef_set_led_switch "lan4" "LAN4" "$boardname:green:lan4" "switch0" "0x10"
;;
+dlink,dir-615-e4)
+ ucidef_set_led_netdev "wan" "WAN" "d-link:green:wan" "eth0"
+ ucidef_set_led_switch "lan1" "LAN1" "d-link:green:lan1" "switch0" "0x02"
+ ucidef_set_led_switch "lan2" "LAN2" "d-link:green:lan2" "switch0" "0x04"
+ ucidef_set_led_switch "lan3" "LAN3" "d-link:green:lan3" "switch0" "0x08"
+ ucidef_set_led_switch "lan4" "LAN4" "d-link:green:lan4" "switch0" "0x10"
+ ;;
netgear,wnr1000-v2|\
netgear,wnr2000-v3)
ucidef_set_led_netdev "wan-amber" "WAN (amber)" "netgear:amber:wan" "eth0"
diff --git a/target/linux/ath79/tiny/base-files/etc/board.d/02_network b/target/linux/ath79/tiny/base-files/etc/board.d/02_network
index 49fccc0b2e..ff12975063 100755
--- a/target/linux/ath79/tiny/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/tiny/base-files/etc/board.d/02_network
@@ -35,6 +35,7 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0 at eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
;;
+ dlink,dir-615-e4|\
netgear,wnr1000-v2|\
netgear,wnr2000-v3|\
netgear,wnr612-v2|\
@@ -75,6 +76,10 @@ ath79_setup_macs()
local board="$1"
case "$board" in
+ dlink,dir-615-e4)
+ lan_mac=$(mtd_get_mac_ascii "nvram" "lan_mac")
+ wan_mac=$(mtd_get_mac_ascii "nvram" "wan_mac")
+ ;;
tplink,tl-wr941-v2|\
tplink,tl-wr941n-v7-cn)
base_mac=$(mtd_get_mac_binary u-boot 0x1fc00)
diff --git a/target/linux/ath79/tiny/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/tiny/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 3da95cc161..5952a40195 100644
--- a/target/linux/ath79/tiny/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/tiny/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -14,6 +14,10 @@ case "$FIRMWARE" in
tplink,tl-wr941-v4)
caldata_extract "art" 0x1000 0xeb8
;;
+ dlink,dir-615-e4)
+ caldata_extract "art" 0x1000 0x1000
+ ath9k_patch_mac_crc $(mtd_get_mac_ascii "nvram" "lan_mac") 0x10c
+ ;;
netgear,wnr1000-v2|\
netgear,wnr2000-v3|\
netgear,wnr612-v2|\
--
2.20.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list