[OpenWrt-Devel] [PATCH v3] ramips: Add support for Head Weblink HDRM200

[Petr Štetiar]

Kristian Evensen <kristian.evensen at gmail.com> [2019-05-10 18:26:22]:

> In order to install OpenWRT, you first need to compile an initramfs
> (ramdisk)-image for the device. 

This is no longer valid, right?

> --- a/target/linux/ramips/base-files/etc/board.d/01_leds
> +++ b/target/linux/ramips/base-files/etc/board.d/01_leds
> @@ -184,6 +184,9 @@ hc5861)
>  	ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" "wlan0"
>  	ucidef_set_led_netdev "wifi2g" "wifi2g" "$boardname:blue:wlan2g" "wlan1"
>  	;;
> +head-weblink,hdrm200)
> +	set_wifi_led "$boardname:green:wifi"
> +	;;

this could be grouped with other devices.

> +			gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;

pa group

> +			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;

spi refclk group

> +			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;

wled group

> +			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;

uartf group

> +			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;

uartf group

> +&pinctrl {
> +	state_default: pinctrl0 {
> +		default {
> +			ralink,group = "i2c", "uartf", "pa", "spi refclk",
> +				       "wled";

so if I'm counting it right, you should probably remove i2c.

-- ynezz

_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel