[OpenWrt-Devel] [PATCH v4 5/6] ipq40xx: Make use of common eeprom.sh library for caldata

Adrian Schmutzler freifunk at adrianschmutzler.de
Fri Mar 1 09:40:21 EST 2019


This merges the ath10k-caldata extraction into the common
eeprom.sh.

Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>

---

New in v3:
Moved over from alternate patchset

Changed in v4:
- Rebased
---
 package/base-files/files/lib/functions/eeprom.sh   |  5 +-
 .../etc/hotplug.d/firmware/11-ath10k-caldata       | 82 ++++++----------------
 2 files changed, 26 insertions(+), 61 deletions(-)

diff --git a/package/base-files/files/lib/functions/eeprom.sh b/package/base-files/files/lib/functions/eeprom.sh
index 80df3bb359..48c7fd362d 100644
--- a/package/base-files/files/lib/functions/eeprom.sh
+++ b/package/base-files/files/lib/functions/eeprom.sh
@@ -67,9 +67,12 @@ ubi_eeprom_extract() {
 	local part=$1
 	local offset=$2
 	local count=$3
-	local ubidev=$(nand_find_ubi $CI_UBIPART)
+	local ubidev
 	local ubi
 
+	. /lib/upgrade/nand.sh
+
+	ubidev=$(nand_find_ubi $CI_UBIPART)
 	ubi=$(nand_find_volume $ubidev $part)
 	[ -n "$ubi" ] || \
 		eeprom_die "no UBI volume found for $part"
diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 1264d2ef36..75e8f1a237 100644
--- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -1,5 +1,7 @@
 #!/bin/sh
 
+. /lib/functions/eeprom.sh
+
 # xor multiple hex values of the same length
 xor() {
 	local val
@@ -16,43 +18,6 @@ xor() {
 	printf "%0${retlen}x" "$ret"
 }
 
-ath10kcal_die() {
-	echo "ath10cal: " "$*"
-	exit 1
-}
-
-ath10kcal_extract() {
-	local part=$1
-	local offset=$2
-	local count=$3
-	local mtd
-
-	mtd=$(find_mtd_chardev $part)
-	[ -n "$mtd" ] || \
-		ath10kcal_die "no mtd device found for partition $part"
-
-	dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
-		ath10kcal_die "failed to extract calibration data from $mtd"
-}
-
-ath10kcal_ubi_extract() {
-	local part=$1
-	local offset=$2
-	local count=$3
-	local ubidev
-	local ubi
-
-	. /lib/upgrade/nand.sh
-
-	ubidev=$(nand_find_ubi $CI_UBIPART)
-	ubi=$(nand_find_volume $ubidev $part)
-	[ -n "$ubi" ] || \
-		ath10kcal_die "no UBI volume found for $part"
-
-	dd if=/dev/$ubi of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
-		ath10kcal_die "failed to extract from $ubi"
-}
-
 ath10kcal_patch_mac_crc() {
 	local mac=$1
 	local mac_offset=6
@@ -88,9 +53,6 @@ ath10kcal_is_caldata_valid() {
 
 [ -e /lib/firmware/$FIRMWARE ] && exit 0
 
-. /lib/functions.sh
-. /lib/functions/system.sh
-
 board=$(board_name)
 
 
@@ -98,8 +60,8 @@ case "$FIRMWARE" in
 "ath10k/cal-pci-0000:01:00.0.bin")
 	case "$board" in
 	meraki,mr33)
-		ath10kcal_ubi_extract "ART" 36864 2116
-		ath10kcal_is_caldata_valid "4408" || ath10kcal_extract "ART" 36864 2116
+		ubi_eeprom_extract "ART" 36864 2116
+		ath10kcal_is_caldata_valid "4408" || mtd_eeprom_extract "ART" 36864 2116
 		ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 102) +1)
 		;;
 	esac
@@ -107,12 +69,12 @@ case "$FIRMWARE" in
 "ath10k/pre-cal-pci-0000:01:00.0.bin")
 	case "$board" in
 	asus,map-ac2200)
-		ath10kcal_ubi_extract "Factory" 36864 12064
+		ubi_eeprom_extract "Factory" 36864 12064
 		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
 			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
 		;;
 	openmesh,a62)
-		ath10kcal_extract "0:ART" 36864 12064
+		mtd_eeprom_extract "0:ART" 36864 12064
 		;;
 	esac
 	;;
@@ -123,14 +85,14 @@ case "$FIRMWARE" in
 	glinet,gl-b1300 |\
 	linksys,ea6350v3 |\
 	qcom,ap-dk01.1-c1)
-		ath10kcal_extract "ART" 4096 12064
+		mtd_eeprom_extract "ART" 4096 12064
 		;;
 	asus,map-ac2200)
-		ath10kcal_ubi_extract "Factory" 4096 12064
+		ubi_eeprom_extract "Factory" 4096 12064
 		;;
 	asus,rt-ac58u)
 		CI_UBIPART=UBI_DEV
-		ath10kcal_ubi_extract "Factory" 4096 12064
+		ubi_eeprom_extract "Factory" 4096 12064
 		;;
 	avm,fritzbox-4040)
 		/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
@@ -145,21 +107,21 @@ case "$FIRMWARE" in
 	openmesh,a62 |\
 	qxwlan,e2600ac-c1 |\
 	qxwlan,e2600ac-c2)
-		ath10kcal_extract "0:ART" 4096 12064
+		mtd_eeprom_extract "0:ART" 4096 12064
 		;;
 	meraki,mr33)
-		ath10kcal_ubi_extract "ART" 4096 12064
-		ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 4096 12064
+		ubi_eeprom_extract "ART" 4096 12064
+		ath10kcal_is_caldata_valid "202f" || mtd_eeprom_extract "ART" 4096 12064
 		ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 102) +2)
 		;;
 	netgear,ex6100v2 |\
 	netgear,ex6150v2)
-		ath10kcal_extract "ART" 4096 12064
+		mtd_eeprom_extract "ART" 4096 12064
 		ath10kcal_patch_mac_crc $(mtd_get_mac_binary dnidata 0)
 		;;
 	zyxel,nbg6617 |\
 	zyxel,wre6606)
-		ath10kcal_extract "ART" 4096 12064
+		mtd_eeprom_extract "ART" 4096 12064
 		ath10kcal_patch_mac_crc $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
 		;;
 	esac
@@ -171,14 +133,14 @@ case "$FIRMWARE" in
 	glinet,gl-b1300 |\
 	linksys,ea6350v3 |\
 	qcom,ap-dk01.1-c1)
-		ath10kcal_extract "ART" 20480 12064
+		mtd_eeprom_extract "ART" 20480 12064
 		;;
 	asus,map-ac2200)
-		ath10kcal_ubi_extract "Factory" 20480 12064
+		ubi_eeprom_extract "Factory" 20480 12064
 		;;
 	asus,rt-ac58u)
 		CI_UBIPART=UBI_DEV
-		ath10kcal_ubi_extract "Factory" 20480 12064
+		ubi_eeprom_extract "Factory" 20480 12064
 		;;
 	avm,fritzbox-4040)
 		/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
@@ -193,21 +155,21 @@ case "$FIRMWARE" in
 	openmesh,a62 |\
 	qxwlan,e2600ac-c1 |\
 	qxwlan,e2600ac-c2)
-		ath10kcal_extract "0:ART" 20480 12064
+		mtd_eeprom_extract "0:ART" 20480 12064
 		;;
 	meraki,mr33)
-		ath10kcal_ubi_extract "ART" 20480 12064
-		ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 20480 12064
+		ubi_eeprom_extract "ART" 20480 12064
+		ath10kcal_is_caldata_valid "202f" || mtd_eeprom_extract "ART" 20480 12064
 		ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 102) +3)
 		;;
 	netgear,ex6100v2 |\
 	netgear,ex6150v2)
-		ath10kcal_extract "ART" 20480 12064
+		mtd_eeprom_extract "ART" 20480 12064
 		ath10kcal_patch_mac_crc $(mtd_get_mac_binary dnidata 12)
 		;;
 	zyxel,nbg6617 |\
 	zyxel,wre6606)
-		ath10kcal_extract "ART" 20480 12064
+		mtd_eeprom_extract "ART" 20480 12064
 		ath10kcal_patch_mac_crc $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
 		;;
 	esac
-- 
2.11.0


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list